NJTSuperKing

Eleazar 3DinPlastic

A very simple headphone holder but in various sizes, there are two main models, for tables from 1.5cm to 2.5cm, or for tables from 2.5cm to 3.5cm, both designs in large and small versions.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/776380/2024-03-27_cb73864b741b9.jpg"></figure>&nbsp;The plates are named with the design that will be printed when you choose that particular plate. &nbsp;Optimised printing profiles to improve printing times and achieve strong and beautiful models.&nbsp;Print and enjoy!

Simple Headphone Stand - Various Sizes

headphones

Jaatinen3D

Fun fidget toy you can spin around your fingers making tricks and impressing your imaginary friend! Print a chain of appropriate length (I&#39;m using length 14, it feels nice) and attach the Ring and End to the chain. Ready to spin!&nbsp;Prints nicely without supports!&nbsp;---Check out the new <a target="_blank" href="https://makerworld.com/en/models/151261" rel="nofollow noopener">Ringchaku Wall Hook</a> to display and store your Ringchaku!---&nbsp;---Update 2024-19-01: I&#39;ve added three smaller versions of the ring: 22mm, 20mm and 18mm. Let me know if you need even smaller!---&nbsp;<figure class="media"></figure>&nbsp;<h3>Check out the special editions too:</h3><figure class="table" style="width: 100%"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000068477/design/2024-01-22_5e3d7929a825c.jpg"></figure></td><td>Valentine&#39;s Day Edition NEW! FREE!</td><td><a target="_blank" href="https://makerworld.com/en/models/152374" rel="nofollow noopener">MakerWorld</a></td></tr><tr><td style="padding: 0px"><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000068477/design/2024-01-19_491754b41e8de.jpg"></figure></td><td>Thanksgiving Edition</td><td><a target="_blank" href="https://than.gs/m/964381" rel="nofollow noopener">Thangs</a> / <a target="_blank" href="https://cults3d.com/:1629286" rel="nofollow noopener">Cults</a></td></tr><tr><td style="padding: 0px"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000068477/design/2024-01-19_91dffdceaa6a6.jpg"></figure></td><td>Mace Edition</td><td><a target="_blank" href="https://than.gs/m/969867" rel="nofollow noopener">Thangs</a> / <a target="_blank" href="https://cults3d.com/:1629291" rel="nofollow noopener">Cults</a></td></tr><tr><td style="padding: 0px"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000068477/design/2024-01-19_be36c48d89bf9.jpg"></figure></td><td>Blade Edition</td><td><a target="_blank" href="https://than.gs/m/973197" rel="nofollow noopener">Thangs</a> / <a target="_blank" href="https://cults3d.com/:1631360" rel="nofollow noopener">Cults</a></td></tr><tr><td style="padding: 0px"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000068477/design/2024-01-19_ab638babd38a6.jpg"></figure></td><td>Christmas Edition</td><td><a target="_blank" href="https://than.gs/m/975683" rel="nofollow noopener">Thangs </a>/ <a target="_blank" href="https://cults3d.com/:1648164" rel="nofollow noopener">Cults</a></td></tr><tr><td style="padding: 0px"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000068477/design/2024-01-19_a4dc599028daf.jpg"></figure></td><td>Kusarigama Edition NEW!</td><td><a target="_blank" href="https://than.gs/m/992237" rel="nofollow noopener">Thangs</a> / <a target="_blank" href="https://cults3d.com/:1711103" rel="nofollow noopener">Cults</a></td></tr></tbody></table></figure>&nbsp;Don&#39;t forget to check out my Instagram and YouTube channel for more interesting projects!<a target="_blank" href="https://www.instagram.com/jaatinen3d" rel="nofollow noopener">https://www.instagram.com/jaatinen3d</a><a target="_blank" href="https://www.youtube.com/@Jaatinen3D" rel="nofollow noopener">https://www.youtube.com/@Jaatinen3D</a>

Ringchaku Spinning Fidget Toy

Fidget

Architect

This is an active window exhaust system to vent fumes from any industrial equipment, specifically designed to fit windows with a 1.5 inch window slot, using a 4 inch wide exhaust pipe, and a 92x28mm fan. There are 4 window inserts, including the fan outlet (required) and extension inserts to fill in the window opening. The inserts can be resized to fit any window in the slicer by using a non-uniform scale in your slicer and adjusting the x (or y) axis depending on the part&#39;s orientation. All of the required parts are available on Amazon.&nbsp;I recommend gluing a 90 degree pipe in the upward position at the window outlet as shown in the photo, as it will serve to catch rainwater and allow for drainage.&nbsp;I added a 90 degree exhaust manifold for the P1S of my own design, since the model I previously linked didn&#39;t seal off very well for me. The new manifold requires 8x ¾ inch x 3/16 inch round magnets, which you can buy on amazon and are included in the BOM. I also added an optional TPU seal that aligns with the holes in the manifold to improve sealing with the P1S. I can&#39;t verify that this part will work on any other printers, however most likely this will work on the X1 varieties as well. When mounted with the magnets, the manifold clamps very strongly to the P1S, compressing the gasket and providing a really good seal (as far as I can observe).&nbsp;I&#39;m also adding in a 42mm straight pipe to the mix, since right now I can&#39;t close my 1 ½ inch wide window shade and this will provide clearance for that when attached to the window outlet.&nbsp;I&#39;ve included a BOM as I built it, feel free to substitute parts for cheaper options if you find sources.&nbsp;I consider this a work in progress and would love suggestions.&nbsp;BOM:8x ¾ inch disk magnetsNoctua nf-a9 92x92x25mm 12V fanSmoTecQ 12V 2A Power Supply AC Adapter - 2x 12V adapters with plugiPower Flexible 4 Inch 8 Feet Aluminum DuctingEEEEE M4 M5 M6 (100pcs) Metric Threaded Inserts

Window Exhaust System (W.E.S.) for P1S 

Exhaust

Fabio_snake

Gridfinity Baseplate 6x5 with manual skirt to avoid lift of corners.Base on <a target="_blank" href="https://thangs.com/designer/ZackFreedman" rel="nofollow noopener">ZackFreedman</a> modelUsed the max size on bambu p1s.My first model and upload, give comment if you find any problems with the model

Gridfinity Base 6x5 manual corner skirt

Gridfinity

karlklemenz

Small shelf to rise movies or games up a bit so you can put 2 rows front of each other in a kallax shelf without blocking the labels

Bluray stand for IKEA KALLAX

Shelving

ARTICAT

<h2>Summary:</h2>Introducing our 3D printed Garbage Bin Clip, a simple yet effective solution for keeping garbage bags securely in place within your trash can.<h2>Features:</h2>Easy Attachment: Clips effortlessly onto the rim of your trash can.Secure Hold: Prevents trash bags from slipping or collapsing into the bin.Universal Fit: Adaptable to various trash can sizes for versatile use.&nbsp;Say goodbye to messy spills and maintain a neat waste disposal system with the Garbage Bin Clip - a small accessory making a big impact! 💡🚮✨

Garbage Bin Clip for Trash Bag

Functional

ChrisP

👉VIDEO: <a target="_blank" href="https://youtu.be/vLtHhiWziIk" rel="nofollow noopener">youtu.be/vLtHhiWziIk</a>&nbsp;I wanted to limit the light spill and designed <ul><li>a frame that can be mounted to the ¼&#34; mounts </li><li>plus grid inserts with different depths!</li></ul><h4>Printing the frame</h4>No supports needed.Use black filament! Tip 1: Print on raft! Long, thin, straight parts can be tricky in regards to 1st layer adhesion.Tip 2: Disable aux fan (set to 0% in filament settings)&nbsp;Keylight mounted horizontally:<ul><li>Print the HORIZ plate 2 times and glue the 2 pieces together to make the frame</li></ul>Keylight mounted vertically:<ul><li>Print the 2 VERT plates and glue the 3 pieces together to make the frame</li></ul><h4>Printing the grid</h4>Grid Depth vs Light emission angle:<ul><li>30mm    ~85°</li><li>35mm    ~75°</li><li>40mm    ~68°</li><li>45mm    ~62°</li><li>50mm    ~57°</li><li>55mm    ~52°</li><li>60mm    ~48°</li></ul>Print the desired grid plate 2 times&nbsp;Note: For other/larger 3D printers: Use the files from the “All Parts” directory that fit your printer<h4>Mounting</h4><ul><li>Mount the frame to the Elgato Keylight using two short ¼&#34; screws</li><li>Put the 2 grid pieces inside and tighten the screws<ul><li>Grids are held in place by tension and can easily be swapped</li><li>For a permanent solution you could also glue everything together</li></ul></li></ul>Please comment, rate and boost! Thank you ♥️

Elgato Keylight Grid (v2)

Lighting 

Damiano

Please give me a thumbs up 👍🏻 if you like this, even if you don't download this - it’ll help more people discover this model. Thanks so much ! Hi ! I created simple cable organizer - it's for USB and Lighting cables. I use that by myself - it's usable and lightweight. Feel free to comment and if You like it please click “Like” button. If You like my model You can buy me a coffee ---> <a target="_blank" href="https://paypal.me/DamianS0k0l" rel="nofollow noopener">https://paypal.me/DamianS0k0l</a>

Cable organizer cable winder for USB iPhone Lighting

Organization

3D Schoko

Poop box for Bambu Lab printers. Important: This waste bin only fits under the waste chute if the printer is on an additional plate. Please look at the image for dimensions and check the height before printing.&nbsp;2 versions:43mm: For thinner granite slabs with a rubber mat.53mm: For thicker concrete slabs.It can be printed without support.&nbsp;Update 12/31/23: Stl. file edited for smooth radius.&nbsp;There is also a smaller version just for the back.<a target="_blank" href="https://makerworld.com/en/models/26855#profileId-35078" rel="nofollow noopener">https://makerworld.com/en/models/26855#profileId-35078</a>And another simple trash can without the cutout for records.<a target="_blank" href="https://makerworld.com/en/models/51331#profileId-53111" rel="nofollow noopener">https://makerworld.com/en/models/51331#profileId-53111</a>&nbsp;&nbsp;&nbsp;&nbsp;