我真的不会建模

MiniRacer

Counter Strike 2 M4A1-S Printstream Remix from iClints ModelsCurrently printed with a Simple 2 tone White and Black PLA, with fixed/Adapted models such as-added optional Suppressor -fixed/changed Various models (Removed Hand Guard's gas tube, rail clamp sizing, Small part fixes for X1-C, Added Supports/Quality of prints, etc.)-Created plates with out the gate 3mf printable settings that are (Hopefully) very efficient&nbsp;Vastly still designed/Created by iClints Models,&nbsp;With the included parts on Plate 5, there is still needed various M3 Screws and Springs to make this prop function correctly (Triggers, mag drop, stock lock, and charging handle). I bought both an m3 screw kit ($13) and spring compression assortment kit ($14) on amazon that came with well over enough parts to make 30 of these. And I did use super glue on a couple connections (from gas tube to hand guard, butt pad, etc.). Other than that its designed that cut pieces of 1.75mm filament to fill pin holes to align various parts. This is still a prop, This doesn't fire anything. &nbsp;Attached is a original PDF that has Step-by-Step Instructions on creation of print.

CS2 Printstream M4A1-S (PLA)

好玩

某阿某困

用于A1 / A1 mini 单机版，只使用上方一个插口时，其余插口裸露，容易进灰，出于防尘和美观可使用该零件，塞住对其余三孔，避免进灰。Used for the A1 / A1 mini standalone version, when only the top socket is used, the remaining sockets are exposed and prone to dust ingress. For dust prevention and aesthetics, this part can be used to plug the other three holes to avoid dust ingress.2.0版本：修正了原先打印过程中易松动的缺陷。Version 2.0:Fixed the original printing process&#39;s easy-to-loosen defect.

好玩

A1 Mini