someone asked me to make this but I didn't like how thin the model was off printables so I made some modifications to it, hope you like it!

I had a lady ask me to make a GraveDigger chain for her 5 year old, wanted to share it with you fine folks as well!

I've seen this sign in a few variations but not what i wanted in particular so I made my own. its about 9 inches wide, and you dont need an AMS to print it, its black up to layer 15, then pink (or whatever color you want) for the remainder.

I designed this model as a successful product for my own business and want to empower others in the 3D printing community.

I took some time to put this together for a friend of mine. This is my first more detailed print and I'm really proud of it. .4mm nozzle, .2mm layer height with some ironing settings for the back since I'm OCD Arachne walls, 3 wall loops, 10% cross hatch takes about 2.5hrs on a Bambu A1 with the settings in the profile, but I'm no expert so I'm open to ideas :)

I see a ton of different shelves out there - here's my add to the mix Prints in 1h35m with HF PETG (I like Elegoo Rapid PETG myself) and uses 45.51g of filament. .2mm layer height | Arachne Walls | 10% Support Cubic Infill | No Raft/Brim/Supports needed You can fit Funko's on here but I like to show off my prints. Lastly i just used command strips, one on each side of the top half of the honeycomb, and they hold everything quite well, especially when you group them together!