Mustedo

Adrigarro

Voronoi ring. Inner radius: 1,8 mm

Voronoi Ring

Rings

PenolopyBulnick

I love Van Gogh&#39;s Starry Night and wanted to find another reason to use it, so I decided to work with the piece to make a Double and Single Light Switch Cover. &nbsp;I altered the art image in order to get the tree image and the moon to fit. &nbsp;The sizes are about the size of mid sized light switch covers. &nbsp;The back and front are printed separately and need to be glued together. I like to use clear Gorilla glue. I like to glue it, let it dry, use a deburring tool to clean all the edges up, and then a torch to clean up where I did the deburring. Helps bring the color back when it gets a white tinge to it. &nbsp;Color Changes: <ul><li>Layers 1 - 23 : Black</li><li>Layers 24 : Earth Brown (Polymaker PolyTerra Matte)</li><li>Layers 25 : Navy Blue (Polymaker PolyTerra)</li><li>Layers 26 - 27 : Blue (Inland Egyptian Blue)</li><li>Layers 28 - 29 : Light Blue (Inland)</li><li>Layers 30 - 32 : Savannah Yellow (Polymaker Matte)</li><li>Layers 33 - top : White</li></ul>Design also used for my <a target="_blank" href="https://makerworld.com/en/models/178658#profileId-196602" rel="nofollow noopener">Fine Art Coasters</a>.

Van Gogh Starry Night Light Switch Covers

Household 

Gunners

Updated with the 3mf file &nbsp;Made in Midjourney AI and finished in Hueforge&nbsp;used Sunlu blackeryone glow in the dark green&nbsp;stepsstart with black to layer 4 (.68)next Glow in the dark for the rest of the print.&nbsp;Frame is from @Madness3D the link is belowhttps://makerworld.com/en/models/49964#profileId-51734

Jack and Sally nightmare love

Jack and Sally

Kiesi

<a target="_blank" href="https://www.crealitycloud.com/de/model-detail/643fdc80d961368f8b0151f8" rel="nofollow noopener">https://www.crealitycloud.com/de/model-detail/643fdc80d961368f8b0151f8</a>&nbsp;I get the model for free over the link and scale the complete model to 165% &nbsp;Also I split up the individual parts and cut the base because it was just too much for me to print all at once.At the same time, I cut the bottom large panel in half again.&nbsp;This is a model in a class of its own with incredible details. Unfortunately I couldn&#39;t upload the individual parts here as they would have exceeded 150mb.

Alien Birth Xenomorph 

Statues

AD3D Art

espresso patronum Harry Potter cafè!

Harry Potter Espresso Patronum coaster

Harry Potter

The Premier Ball (Japanese: プレミアボール Premier Ball) is a type of <a target="_blank" href="https://bulbapedia.bulbagarden.net/wiki/Pok%C3%A9_Ball" rel="nofollow noopener">Poké Ball</a> introduced in <a target="_blank" href="https://bulbapedia.bulbagarden.net/wiki/Generation_III" rel="nofollow noopener">Generation III</a>. It can be used to catch a <a target="_blank" href="https://bulbapedia.bulbagarden.net/wiki/Wild_Pok%C3%A9mon" rel="nofollow noopener">wild Pokémon</a>. It was developed by the <a target="_blank" href="https://bulbapedia.bulbagarden.net/wiki/Devon_Corporation" rel="nofollow noopener">Devon Corporation</a>.

Premier Ball - Pokemon Pokeball

Pokeballs

NuuP444

Universal Car Seat Belt Alarm Diffuser Alarm Stopper

Universal Car Seat Belt Alarm Diffuser Stopper

Tools

xxDUFFYxx

This is my 3rd attempt at the Trump Mugshot that was requested on a BBL forum  . I used a photo editor and Hueforge to make this 2D Hueforge art. I have more and will continue to make Trump-themed prints if people like them .&nbsp;I have included a text file of filaments and layer swaps. I use Orcaslicer's config and then import the files into Bambu Studio.   I also have listed them below :Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used:     PLA BambuLab Matte Charcoal Transmission Distance: 0.6     PLA+ Esun Orange Transmission Distance: 5     PLA BambuLab Basic Yellow Transmission Distance: 6     PLA BambuLab Matte Ivory White Transmission Distance: 6Swap Instructions:     Start with Charcoal     At layer #12 (1.04mm), swap to Orange     At layer #18 (1.52mm), swap to Yellow     At layer #20 (1.68mm), swap to Ivory White for the rest.&nbsp;

Trump MugShotted 

Jamboodle

Americana Butterfly Layered Plaque 3 color plaque. Can be used as wall art or on a counter . Prints in 3 color as an assembly. Layered to minimize waste.&nbsp;Watch for more Independence Day Prints coming in the upcoming weeks. Follow me to know when they are released.&nbsp;<figure class="image image_resized" style="width: 412px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000485278/design/2024-06-04_3b5fadc61422f.png"></figure>If you appreciate this model remaining free please consider giving it a like and maybe a Boost. Be sure to post your print in the comments for everyone to see.&nbsp;Please check out my other work: <a target="_blank" href="https://makerworld.com/en/u/2300808475" rel="nofollow noopener">Jamboodle</a>&nbsp;Thanks for looking and Happy Printing!&nbsp;

American Flag butterfly Layered Plaque

Butterflies

Murica

crabstiks

Donnie Darko Jake Gyllenhall movie poster fridge magnet.&nbsp;Measuring 65mm wide by 95mm high by 5mm deep&nbsp;4 colour AMS print, using black, dark blue, white and ice blue.&nbsp;This needs 4x 8mm diameter by 2mm deep magnets, the magnets push into the model after printing, no need to pause.&nbsp;NOTE - The magnets are designed to be a tight fit. The best way to insert them is to line up a magnet with a hole then place the model on a hard flat surface facing up, with the magnet on the hard surface, then press down firmly on the model. The magnet will snap into place. Repeat for each magnet.&nbsp;

Donnie Darko movie poster fridge magnet

Donnie Darko

Movies

3D matske

this vase is printed in PLA metal. If you have a question or suggestion, don't hesitate to let me know

vase

Vases

Mr Potato

Skull &amp; Snakes BIC Sleeve&nbsp;Hope you guys like my uploads! Please Like / Download / Boost to support me 🙏

Skull & Snakes BIC Sleeve

Lighter Sleeves

PI3D

Cool laptop stand to assemble without glue, just put it together and you're done. The two drawers can also be equipped with magnets so that they lock into the closed position.For this you need four magnets with a diameter of 3mm and a thickness of 2mm.&nbsp;The assembly video: <figure class="media"><div data-oembed-url="https://youtu.be/AelnyxCAVfo"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/AelnyxCAVfo" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Laptop Stand 

Work

Diego Varsa

ITA: Ecco qua quello che dovrebbe essere un ipotetico badge da esporre o un token da usare come soprammobile! Purtroppo ci sono dei buchi su cui posso fare ben poco se riuscite a risolvere il problema postate un remake! Vi suggerisco di stampare l&#39;oggetto con un diametro di 35mm/3.5cm al di sotto di queste dimensioni inizia a perdere molti particolari.&nbsp;ENG: Here is what should be a hypothetical badge to display or a token to use as a ornament! Unfortunately, there are some holes in it that I can do very little about. If you manage to solve the problem, post a remake! I suggest printing the object with a diameter of 35mm/3.5cm. Below these dimensions, it starts to lose many details.

Helldivers 2 Malevelon Creek Veteran Badge/Token

Helldivers

Mushroom

3D_Madness

For every true Pirate! Skull with bones designed for the wall decoration.

Pirate - Skull and bones

Pirates

IRONATOR SKULL

Terminator

JosayaJosh

RETRACTABLE LIGHTSABER KEYCHAIN&nbsp;NO STRUCTURE required!&nbsp;EASY ASSEMBLY!&nbsp;BOTTOM OF THE HILT CAN BE UNSCREWD to allow the blade to be removed and replaced. The lightsaber blade retracts out when swung through the air.&nbsp;KEYCHAIN RING required&nbsp;BRIM needed for printing Blade&nbsp;This is a replica of Obi-Wan Kenobi&#39;s lightsaber. Please do support by downloading and trying the model out. This was not an easy project due to the size of the print. Smaller prints tend to fail especially when it requires movement.&nbsp;Material used:(Feel free to try other materials)<figure class="table"><table style="border: 2px solid hsl(0, 0%, 0%)"><tbody><tr><td>Grey</td><td>PolyTerra PLA</td></tr><tr><td>Black</td><td>Basic PLA</td></tr><tr><td>Gold</td><td>Basic PLA</td></tr><tr><td>Blue</td><td>PolyTerra PLA</td></tr></tbody></table></figure>&nbsp;&nbsp;

Lightsaber Keychain (Retractable)

Star Wars

JustBe 3D Printing

Tired of having your prints turn out noting like the posted “photo”? Then you&#39;ve come to the right spot, I only post photos of the actual print and not the file they were generated from.&nbsp;This is Deadpool part 1 of 4 as a request by one my Patreon members. If you have a request, want FREE *Patreon exclusive* models(like the ones below), or if you are interested in members only models and commercial licenses to sell your physical prints visit my Patreon in bio <a target="_blank" href="http://patreon.com/JustBe3D" rel="nofollow noopener">http://patreon.com/JustBe3D</a><figure class="image image_resized image-style-side" style="width: 24.87%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000483782/design/2024-06-10_48ac7fc242c85.jpg"></figure>&nbsp;Instructions Can be rescaled just remember not to change the Z axis.Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used:PLA Kingroon Black Transmission Distance: 0.4PLA Overture Space Gray Transmission Distance: 1.4PLA Overture White Transmission Distance: 4PLA Overture Red Transmission Distance: 8.2This print uses 4 unique filaments&nbsp;Swap Instructions:Start with BlackAt layer #14 (1.2mm) swap to Space GrayAt layer #17 (1.44mm) swap to WhiteAt layer #21 (1.76mm) swap to BlackAt layer #22 (1.84mm) swap to RedAt layer #29 (2.4mm) swap to White for the rest.

Deadpool

Think3D

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Start with Black At layer #5 (0.48mm) swap to Blue At layer #10 (0.88mm) swap to Orange At layer #15 (1.28mm) swap to Jade White for the rest.&nbsp;170x170 Version:Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Start with Black At layer #9 (0.8mm) swap to Blue At layer #14 (1.2mm) swap to Orange At layer #19 (1.6mm) swap to Jade White for the rest.&nbsp;___________________________________________________________________________________If you like my work, please consider a small donation :) Thank you very much :*<a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=RWRXKCAEM86K8" rel="nofollow noopener">https://www.paypal.com/donate/?hosted_button_id=RWRXKCAEM86K8</a>&nbsp;

Goku Space Dragonball - HueForge

Leonardo

Gifts

precisionprintpro

re-designed my grandmothers Celtic cross as her wooden one was getting a bit worn and dated.&nbsp;thought I would share the design with you guys.&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/precisionprintpro" rel="nofollow noopener">BUY ME A COFFEE</a>

Celtic Cross

Moons

Danleger1960

Scene of Jesus carrying his cross through the town

Jesus Carrying his Cross

crosses

Mc2.project3D

<h2>ARK MK1 REACTOR by Tony StarkThis is the Iron Man heart for LED Lamp kit-001.</h2>Simple to print, no supports. (to be printed at 0.2mm layers and in Pla material)<h3>--V2 REVIEW COMPLETED--for further information see attachment--</h3>EXLOSED FUSION 360:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-02_d0ad36003ab58.png"></figure>LINK assembly: (follow the Gifs at the bottom of the page)https://www.instagram.com/reel/C7HQLcwtCva/?igsh=aWJxbnk3aHpocnJ4&nbsp;COLORS USED:-Black-White-Silver (grey)-Gold-Copper-Transparent&nbsp;Different colors can also be used.&nbsp;<figure class="image image_resized" style="width: 65.11%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-02_dfbd2dcda0747.jpg"></figure>&nbsp;COLORAND QUANTITYComponents to print with Black color:-BASE-ASTA CORTA (x 10 pezzi)-ASTA LUNGA (x 10 pezzi)-ANELLO ASTE-CLIP (20 pezzi)-ANELLO BUCATO-CORONA SUPERIORE-PONTE ANELLO SUP&nbsp;Components to print with White color:-ANELLO CENTRALE-PIASTRA DISCHI-SCALE ANELLI (x 3 pezzi)&nbsp;Components to print with Grey color:-ANELLO SUPERIORE-VITE (x 3 pezzi)&nbsp;Components to print with Copper color or Gold color:-ANELLETTO 1-ANELLETTO 2-ANELLETTO 3-ANELLETTO 4-BOBINA (x 10 pezzi) Components to print with Transparent or White color:-CORDONE (x 10 pezzi)&nbsp;ASSEMBLY STEP TO STEP:STEP 1-BASE-ASTA CORTA (x 10 pezzi)-ASTA LUNGA (x 10 pezzi)<figure class="image image_resized" style="width: 55.79%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-05-18_9ac29e20e0b1e.gif"></figure>&nbsp;STEP 2-LED LAMP KIT-001<figure class="image image_resized" style="width: 55.42%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-05-18_c2adad2b7a86c.gif"></figure>&nbsp;STEP 3-ANELLO CENTRALE-PIASTRA DISCHI-SCALE ANELLI (x 3 pezzi)-ANELLO BUCATO<figure class="image image_resized" style="width: 54.49%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-05-18_098ff17d18285.gif"></figure>&nbsp;STEP 4-ANELLETTO 1-ANELLETTO 2-ANELLETTO 3-ANELLETTO 4<figure class="image image_resized" style="width: 55.05%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-05-18_3c5e3c122d75a.gif"></figure> STEP 5-ASSIEMAGGIO STEP 1 E STEP 4-ANELLO ASTE<figure class="image image_resized" style="width: 54.31%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-05-18_d530ed8b5197a.gif"></figure>&nbsp;STEP 6-CLIP (20 pezzi)-CORDONE (10 pezzi)-BOBINA (x 10 pezzi)<figure class="image image_resized" style="width: 53.42%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-05-18_96dd67f61a1bb.gif"></figure>&nbsp;STEP 7-ASSIEMAGGIO STEP 5 E STEP 6-CORONA SUPERIORE<figure class="image image_resized" style="width: 52.87%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-05-18_959c30a0e78b4.gif"></figure>&nbsp;STEP 8 (FINE)-ANELLO SUPERIORE-VITE (x 3 pezzi)<figure class="image image_resized" style="width: 50.83%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-05-18_1ebd86754979c.gif"></figure>&nbsp;<h2 style="text-align: center">BASE REATTORE ARC MK1</h2><figure class="image image_resized" style="width: 65.34%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-02_ed19e7b5a87ce.jpg"></figure> REACTOR BASE COMPONENTS:-PIATTAFORMA-RIDUZIONE-TUBO BASE-BIG VITE-DISCO SCRITTE-SCRITTE&nbsp;COLORS USED:-Grey-Black&nbsp;ASSEMBLY STEP TO STEP:STEP 1 (CLUTCH ASSEMBLY)-DISCO CON SCRITTE-RIDUZIONE<figure class="image image_resized" style="width: 50.14%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-05-26_3515a4fd55e3e.gif"></figure>&nbsp;STEP 2 (SCREWED MORE INSTALLATION)-PIATTAFORMA-BIG VITE-TUBO BASE<figure class="image image_resized" style="width: 49.86%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-05-26_23c1d603412a6.gif"></figure>&nbsp;STEP 3<figure class="image image_resized" style="width: 62.52%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-02_5b40963220172.gif"></figure>  If you want to put up with my work and help me design more: https://www.paypal.me/carmelomontalto88&nbsp;This project gave me a lot of satisfaction. Available for any questions.Good Print from MC2 PROJECT 3D

Reattore Arc MK1 (LED Lamp Kit-001)

Ryan

Iron Man

tropicgtiturbo

blink 182 lightbox/ wall art

Blink 182

This is the stand I created for ironman mark85 bust from this link:<a target="_blank" href="https://www.cgtrader.com/free-3d-print-models/art/sculptures/free-iron-man-mark-85-bust" rel="nofollow noopener">https://www.cgtrader.com/free-3d-print-models/art/sculptures/free-iron-man-mark-85-bust</a>&nbsp;for my a1 mini, the scale is down to 30% from the original ironman file.&nbsp;Wires were tricky for me, a beginner for 3d printing.&nbsp;Consider skipping the thin wires, and only do the thicker tube.&nbsp;*added the assembled version raw model data for reference*Mar11 2023: updated the file. simpler/cleaner/a bit thicker wires. overall scale 40% to the ironman bust file&nbsp;enjoy!&nbsp;h&nbsp;

base/stand for Ironman mark85 bust(stand only)

Marvel

Canadian Gamer

Dallas Cowboys - NFL Hueforge&nbsp;NOTE: This upload was failing on slicing time for 200x200 size. So the 3MF is 150x150.  You will need to scale it back to 200x200 (BUT DO NOT SCALE THE Z AXIS)&nbsp;The rest of my Football (CFL / NFL / XFL) Hueforges can be found in this collection here: <a target="_blank" href="https://makerworld.com/@CanadianGamer/collections/549656" rel="nofollow noopener">https://makerworld.com/@CanadianGamer/collections/549656</a>&nbsp;-----------------------------------&nbsp;If you&#39;re looking for a commercial license to sell my prints, or to make a custom design request, please head over to my Patreon where those options are available: <a target="_blank" href="https://www.patreon.com/CanadianGamer3DPrintsEDM" rel="nofollow noopener">https://www.patreon.com/CanadianGamer3DPrintsEDM</a>&nbsp;The pictured Frame is a friction Fit design here for 200x200 Hueforges <a target="_blank" href="https://makerworld.com/en/models/381229#profileId-281475" rel="nofollow noopener">https://makerworld.com/en/models/381229#profileId-281475</a>&nbsp;In my print profile I have assigned the model to have a variable layer print height, which means that the first 4 layers of the model will print with a 0.16 layer height, and switch to a 0.08 layer height for the details. If you use my uploaded print profile this will save you time on your print as the first 0.64mm is just to provide stability to the print for display. This means that the layer heights listed below in my printing instructions will not match my print profile (they will be off by 3) but the mm heights will still match! Do not change the print profile to match or it will not look the same!&nbsp;If you resize the model make sure you do NOT scale the Z axis or the print colours will not be in the same position&nbsp;And if you scale it down, I have frames for 150x150 or 100x100 here:<a target="_blank" href="https://makerworld.com/en/models/173529#profileId-190705" rel="nofollow noopener">https://makerworld.com/en/models/173529#profileId-190705</a>&nbsp;Please post a picture of your printed copy! I&#39;d love to see it!&nbsp;— Printing Instructions---&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.64mm The Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Matte Dark Blue Transmission Distance: 1 PLA BambuLab Matte Marine Blue Transmission Distance: 3 PLA BambuLab Basic Silver Transmission Distance: 0.5 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filamentsSwap Instructions: Start with Dark Blue At layer #15 (1.28mm) swap to Marine Blue At layer #18 (1.52mm) swap to Silver At layer #22 (1.84mm) swap to Jade White for the rest.

Dallas Cowboys - NFL Hueforge

steve

Corp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;The Model is 200x200mm in size. X and Y can be adjusted but Z must remain the same. You may print at higher layer heights below the Min Depth of 0.48mm Actual Depth is 2.2mm&nbsp;Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 2.5 PLA BambuLab Basic Gray Transmission Distance: 3 PLA BambuLab Basic White Transmission Distance: 6 This print uses 4 unique filaments. Substitute as needed.&nbsp;Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #14 (1.2mm) swap to Gray At layer #21 (1.76mm) swap to White for the rest.

Dark Garden

Houston713Texan

colors used pla black pla white

Marilyn Monroe black and white includes a1 mini

Marilyn Monroe

Ocular Dynamic

Stabby cat door frame topper. Put one up to remind people the cat is not to be trusted or for Halloween, either one is valid. Profile is setup for A1 Mini build plate and is 3mm thick, but easily scalable to make whatever size you want.

Knife Cat Door Topper

Cats

Rick9206

You asked for the files, here they are! Happy printing guys and gals!&nbsp;Print time for the rose is about 5 hours and 15 minutesPrint time for the stem is about 5 hours and 5 minutesPrint time for the vase is about 2 hours 30 minutes&nbsp;I was able to fit up to 18 roses on 1 build plate.I was able to fit 13 stems on 1 build plate.&nbsp;DO NOT USE LUDACRIS MODE or SPORT MODE on the roses, and also for the stems start wtih Normal or Silent mode and then after the first 3 to 5 layers move on to sport and gradually increase up to ludacris if you desire speed. Sport mode saves you 24% of time but the time saved on the flower part is not worth the mess if your printer screws up your print. Believe me I have learned after printing about 500 of these things…. &nbsp;I used polymaker filament but you can use any filament you desire.&nbsp;Good luck to you all!

3D Printed Roses For All Occasions

Flowers

Deltree3D

This Robocop bust was modeled by Wekster on Printables. All credit goes to him. Go check out his other amazing creations.&nbsp;I've painted this model in Bambu Studio to save you all the time and hassle. Flushing volumes optimized for less filament waste. Print with your own desired settings, or those that I've provided.

Robocop - Multicolor

Busts

a.vdh_1983

If you like my work, i'm open for donations via Paypal. It is much appreciated. <a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=3KZUPFUG4KLUL" rel="nofollow noopener">https://www.paypal.com/donate/?hosted_button_id=3KZUPFUG4KLUL</a>&nbsp;&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Blue Gray Transmission Distance: 3.2 PLA BambuLab Gray Transmission Distance: 1.6 PLA BambuLab White Transmission Distance: 9.6Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Blue Gray At layer #14 (1.2mm) swap to Gray At layer #19 (1.6mm) swap to White for the rest.

4-color HueForge RoboCop

Newman

nicodeimos

Ring hole: 4.8mm.Model size: 52mm x 23mm x 3.2mm.Filaments: Bambu Lab Matte PLA (only 1 AMS needed).&nbsp;Please do not sell, copy, remix or distribute this model.<a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=G5FK3QJJUSW8N" rel="nofollow noopener">Enjoying my models? Make a donation!</a>&nbsp;Likes, comments and prints help to support me and will be very much appreciated!Feel free to <a target="_blank" href="https://makerworld.com/en/u/2495159158" rel="nofollow noopener">contact me</a> for any information.&nbsp;This 3D model is a unique custom-made version inspired by the work of Metallica and any brand/studio/production/trademark associated with it. I do not take credit for the original drawing.

Bands Metallica keychain

Keychains

mclanesmemories

Set of 3 Pop Art Style Bookmarks - Dolphins jumping in the bright sundrenched ocean&nbsp;Please share your prints&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Swap Instructions: Start with Black At layer #4 (0.40 mm) swap Blue At layer #8 (0.72 mm) swap to Orange At layer #12 (1.04mm) swap to white

Set of 3 Pop Art Style Bookmarks - Dolphins jumping in the bright sundrenched ocean

Dolphins

Patti

Misterdoctor

blackred at 4blue at 10white at 19 can also use yellow hereyellow at 21 optional

stranger things hueforge season 2

Stranger Things

Eclipse 3D

Small Penis Keychain

Small Penis Keychain

The Dingbat Army

A sculpted pendant of the Skyrim logo for you to wear.  Printed on Resin myself but should happily be able to still print on an FDM Printer. #Included Supported Model in case you use resin.

Skyrim Pendant

Elder Scrolls

undi23

Funny PEW PEW MADAFAKAS LightboxThe lightbox has a diameter of approx. 220 mm and a depth of 40 mm. To illuminate the box you need an LED strip approx. 80 cm long. In the print profile there are two breakouts in the rear part of the box. One to run the LED strip through and one to hang the box. If you need other holes or want to eliminate the existing holes, you can do this in Bamboo Studio with primitives. If you have any questions about this, please feel free to get in touch.&nbsp;If you have any requests for changes or ideas, just let me know.

Pew Pew Madafakas Lightbox

Coasters

💡Idea Prints✔️

<h4>★·.··.·★ 👋 Hello😁 ★·.··.·★</h4>Before reading the description I recommend in the future to look at the collections I created for a better service for other projects is to distinguish them better💚MAKERWORLD→ <a target="_blank" href="https://makerworld.com/en/@Idea/collections" rel="nofollow noopener">COLLECTIONS</a>if you like the project you want to see others so leave LIKE👍 , <a target="_blank" href="https://makerworld.com/en/@idea" rel="nofollow noopener">FOLLOW</a>👤 AND ESPECIALLY THE BOOST 🚀 I recommend to print them in asa since they must be under the sun but they can also be printers in petg/ pla but definitely last less just fit the beach towel inside and press the picket in the sand or earth if you want to have a picnic

Beach towel clip 

Beach Stuff

atm473

DSV Bambu Kit 010 Submarine<ul><li>Easy to print</li><li>Easy to assemble</li><li>Fun for the beach and the pool </li></ul>Introducing the future of water adventure: the DSV Bambu submarine powered by the Bambu Lab Component Kit 010 wind-up motor. Quiet, agile, and powerful, it&#39;s your ticket to exploring waters both big and small like never before. Experience the thrill of silent propulsion and eco-friendly technology. Dive into the future today!

DSV Bambu Kit 010 Submarine

Submarines 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;The Model is 200x200mm in size. The X and Y can be changed but Z must remain the same. You may print at higher layer heights below the Min Depth of 0.48mm Actual Depth is 2.2mm&nbsp;Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments. Substitute as needed.&nbsp;Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Blue Gray At layer #14 (1.2mm) swap to Gray At layer #21 (1.76mm) swap to Jade White for the rest.

Sagittarius

signs

FrozenNorth

Minnesota Vikings LED sign. This is made to use as a LED sign that you can hang on the wall or just as a sign what you want to do with it is your choice. Printed great for me. Enjoy

Vikings Led Sign

Sports

thisnoise

Just a simple fallout wall sign.&nbsp;Wanted one to go with my other designs that are on my wall &amp; this is what I went with.&nbsp;Created fully in tinkercad.

Fallout Logo sign

Fallout

Lozagon1234

Embark on an intergalactic journey with our "This is the Way" Stormtrooper Helmet LED LightBox 3D model. Featuring a striking design with half a Stormtrooper helmet and the iconic phrase, this lightbox is a must-have for fans of both the Galactic Empire and the Mandalorian saga.Galactic Fusion Design: Immerse yourself in the duality of the Galactic Empire and the Mandalorian creed with a lightbox that harmoniously blends a Stormtrooper helmet with the iconic phrase "This is the Way." The design, visually captivating and symbolic, creates a striking centerpiece for any Star Wars fan's collection.Optional LED Enhancement: Elevate the intergalactic ambiance with optional LEDs that enhance both the Stormtrooper helmet and the phrase "This is the Way." Illuminate the captivating design with customizable lighting options, casting a dynamic and mesmerizing glow in your space. Immerse yourself in the Star Wars universe with the captivating illumination of the LED-enhanced lightbox.Easy 3D Printing: Designed for simplicity, this 3D model is optimized for easy printing on standard 3D printers. The user-friendly design ensures a straightforward assembly process, allowing you to effortlessly incorporate the "This is the Way" Stormtrooper Helmet LED LightBox into your space.Customization Possibilities: Express your love for Star Wars by experimenting with different filament colors to match your personal style or complement your surroundings. The modular design of the Stormtrooper Helmet LED LightBox allows for easy customization, making it a versatile and personalized addition to your collection.Perfect for Enthusiasts and Collectors: Whether you're a dedicated Star Wars aficionado, a fan of the Mandalorian, or simply appreciate symbolic designs, this 3D model is perfect for enthusiasts and collectors alike. Showcase your love for both the Galactic Empire and the Mandalorian creed by proudly displaying the "This is the Way" Stormtrooper Helmet LED LightBox in your home, office, or dedicated Star Wars space.Explore More: If you've found inspiration in the fusion of the Stormtrooper helmet and the iconic phrase, we invite you to explore our diverse collection of 3D models. From iconic symbols to personalized designs, our range caters to all Star Wars enthusiasts. Download now and bring a unique blend of Galactic Empire and Mandalorian spirit to your surroundings!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/280481/2023-12-17_b4f6406e7c016.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/280481/2023-12-17_b08833b062fce.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/280481/2023-12-17_1925ba3ab797e.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/280481/2023-12-17_2ac0c906da28b.png"></figure>

Star Wars Mandalorian Helmet and text LED LightBox (StarWars)

Mandalorian

FallenAngel

Mug to hold typical beer cans ( The slot is ~70mm in diameter). Mug's Height is ~150mm &nbsp;Note: requires Support at few areas.

Mug - Dragon Version 

Cups

SikorS

Hi! This is my design of phrase: “I am kenough” from Barbie movie as a keychain. Simple design, but it looks pretty good. it&#39;d amazing gift for Barbie &amp; Ken fans. You can use diffrent shade of pink/purple for letter K. (I had only one pink colour)&nbsp;If you like my design feel free to leave a comment :)

I am Kenough keychain

Squish3D

Do NOT adjust the thickness (Z) in your slicer!! The layers will not come out right. You CAN adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness.&nbsp;These were my settings and colors for my print that you see in the picture. Your results may vary depending on the filament you use and if you have your own HueForge profile saved with different settings.&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Nozzle: 0.4&nbsp;Filaments Used:PLA Hatchbox True Black Transmission Distance: 0.4PLA BambuLab Basic Red Transmission Distance: 5PLA Sunlu Gold Transmission Distance: 5PLA Sunlu White Transmission Distance: 5&nbsp;Swap Instructions:Start with True Black At layer #28 (2.32mm) swap to Red At layer #31 (2.56mm) swap to Gold At layer #33 (2.72mm) swap to White for the rest

Rose - HueForge

Muffin's

hlrcreations

Print at 100% infill and 2 walls with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used: Bambu Basic black Transmission Distance: 0.6 Bambu Basic Simple green Transmission Distance: 8 Bambu Matte Grass Green Transmission Distance: 2 Bambu Basic Jade White Transmission Distance: 4 Bambu Basic orangeTransmission Distance: 10 Swap Instructions: Start with Black At layer #11 (0.96mm) swap to Basic Green At layer #17 (1.44mm) swap to Grass Green At layer #20 (1.68mm) swap to Orange At layer #22 (1.84mm) swap to White

Green Dragon (Hueforge)

Dragons

Bambu Lab

This 3D printing model is a hand grip designed to attach to the blade provided with Bambu Lab printers for easy removal of printed objects from the build plate. Its ergonomic design ensures a comfortable and secure grip, and it is optimized for compatibility with Bambu Lab printers.

Bambu Scraper Grip

Printer Tools

B-Lab 3D

Testare un nuovo modello di PLA sulle nostre Bambu per avere un profilo perfetto di stampa! Buona stampa a tutti, amo Maker World🚀🚀🚀🚀

Nozzle Temperature Test -PLA - Bambu Lab

Calibration 

FYTY112

Imprima al 100% de relleno con una altura de capa de 0,08 mm y una capa base de 0,16 mmFilamentos utilizados: PLA BambuLab Basic Negro Distancia de transmisión: 0,6 PLA BambuLab Basic Jade Blanco Distancia de transmisión: 5 PLA BambuLab Basic Amarillo Distancia de transmisión: 6 PLA BambuLab Basic Rojo Distancia de transmisión: 4 PLA BambuLab Basic Negro Distancia de transmisión: 0,6Instrucciones de intercambio: Empezar con negro En la capa n.º 8 (0,72 mm), cambie a Jade White En la capa n.º 17 (1,44 mm), cambie a Amarillo En la capa n.º 19 (1,6 mm), cambie a rojo En la capa n.° 22 (1,84 mm), cambie a Negro para el resto.

SKULL

roses

MM_3DP

Ams Adapter for mounting spool without original spool holder. 40mm min spool hole.&nbsp;Tested with <a target="_blank" href="https://makerworld.com/en/models/125803" rel="nofollow noopener">Tpu multicolor ams lite mod</a> for use with overture large spool.Tested with 250gr sunlu spool.Print with PLA.Great accessory for TPU print in association with mod for AMS disengage.

AMS LITE Universal Spool Adapter 

Printer Mods

salvatorepascuzzi

Print at 100% infill with a layer height of 0.06mm with a base layer of 0.24mmSwap Instructions: Start with Blu At layer #8 (0.66mm) swap to Sfumature di Blu At layer #13 (0.96mm) swap to Arancione At layer #17 (1.2mm) swap to Sfumature di Grigio At layer #20 (1.38mm) swap to White for the rest.

Rings

Household

Jack and Sally

Statues

Harry Potter

Pokeballs

Tools

Art

Butterflies

Murica

Donnie Darko

Movies

Vases

Lighter Sleeves

Work

Helldivers

Mushroom

Pirates

Terminator

Star Wars

Deadpool

Leonardo

Gifts

Moons

crosses

Ryan

Iron Man

Blink 182

Marvel

steve

Mustedo

Marilyn Monroe

Cats

Flowers

Busts

Newman

Keychains

Dolphins

Patti

Stranger Things

Dix

Elder Scrolls

Coasters

Beach Stuff

Submarines

signs

Sports

Fallout

Mandalorian

Cups

Keychains

Muffin's

Dragons

Printer Tools

Calibration

roses

Printer Mods

Nature

Hearts

Hueforge

skulls