Muñoz3D

PartyLime

GEN 12: please see my profile for the GEN 12 ball. There&#39;s a limit of 500mb on one page so I had to make another for the latest Gen. It bounces really well and feels super durable in TPC I wasn&#39;t satisfied with the current models of the airless basketball on here as they only had a single lattice. This took me days make sure the double lattice worked in CAD - SolidWorks was not built for this! As I don&#39;t have $2,500 to spare, I worked from the images available online.I printed it in TPU. It doesn&#39;t bounce as much as a standard basketball in TPU so I suggest a stiffer material.&nbsp;GEN 9: I have added a gen 9 version. It is a little closer to the original and should weigh about the right amount when printed in TPU/PLA&nbsp;GEN 10: I have adjusted the size of the hex holes and increased the filled on them. I&#39;ve also increased the lattice thickness to 8mm to hopefully increase bounce. The logo on the top and the airless gen 10 tag have also increased in size a little to improve how they look. Lastly, the holes around the seam are now pentagons as in the original ball&nbsp;GEN 11: I have added a new version with cut-outs throughout the seams. This will hopefully make the bounce more consistent.&nbsp;The original version I uploaded was removed due to “abnormal download data”. MakerWorld support took all my points but said I could re-upload so here it is again. Hopefully that won&#39;t happen again. MATERIALS:Extrudr Hard TPU (58D) - good durability about 40% bounceOverture Super PLA+ - 100% bounce but broke easilyOverture easy nylon (PA6) - broke almost instantly (the community have suggested “annealing” the print in water to increase durability)BASF Forward AM Ultrafuse TPU 64D - good durability and 60% bounce (BEST SO FAR)BASF Ultrafuse TPC 45D - good durability and great bounce. I recommend annealing this one at 110°C for 10 hours at least.

Airless basketball

flexible

Michael Rechtin

&nbsp;Full Build Detailed in Youtube Video:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=h6chNEaXb-o"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/h6chNEaXb-o" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>Hardware List: (Affiliate Links) Motors: <a target="_blank" href="https://amzn.to/4c5N0SW" rel="nofollow noopener">https://amzn.to/4c5N0SW</a> Flight Controller: <a target="_blank" href="https://amzn.to/43eu3ZS" rel="nofollow noopener">https://amzn.to/43eu3ZS</a> DJI O3: <a target="_blank" href="https://amzn.to/431EGiR" rel="nofollow noopener">https://amzn.to/431EGiR</a> 2mm Bullet Connector: <a target="_blank" href="https://amzn.to/3In6B3l" rel="nofollow noopener">https://amzn.to/3In6B3l</a> LEDs: <a target="_blank" href="https://amzn.to/3uV63hX" rel="nofollow noopener">https://amzn.to/3uV63hX</a> Props: <a target="_blank" href="https://amzn.to/3IpEkc9" rel="nofollow noopener">https://amzn.to/3IpEkc9</a> 4s 1300mah Batteries: <a target="_blank" href="https://amzn.to/436hHmL" rel="nofollow noopener">https://amzn.to/436hHmL</a> M4x12 Bolt: <a target="_blank" href="https://amzn.to/3T6co23" rel="nofollow noopener">https://amzn.to/3T6co23</a>&nbsp;FPV Equipment (Other products may be able to be substituted): RC Controller: <a target="_blank" href="https://amzn.to/3VbpZYy" rel="nofollow noopener">https://amzn.to/3VbpZYy</a> FPV Goggles: DJI FPV Goggles V2

100MPH FPV Race Quad

dron

Josh-3D

[Update]I&#39;ve uploaded a print profile for a Samsung Galaxy version. I had a friend test print with his charger puck, and it seemed to fit fine. I don&#39;t have a way to test and inspect in person though, so I&#39;ve tagged it as a Beta for the moment until some feedback/reviews/prints roll in, and hopefully things fit! &nbsp;ModelA stand for your Apple watch! (And now Samsung Galaxy watch too!) I wanted to explore some new ideas with this one; doing kind of an imbedded two tone look. I wanted that contrast between the outer painted shell and the inner exposed metal parts.&nbsp;This model is setup to be printed with an AMS. One could probably break the model up to be printed on a signal color printer, but my intention was for it to be printed in one piece, so is setup as such, without any additional clearances or anything.&nbsp;Hardware &amp; FilamentsFeatured FilamentsBambu PLA Metal - Iridium Gold &amp; Cobalt BlueBambu PLA Metal - Copper Brown &amp; Oxide Green&nbsp;Hardware8x M3 x 12mm (for the front face, feet, and Y bracket/base connection)2x M3 x 16mm (For the Y/Wrist connect)1x M3 x 20mm (For the wire clip/foot)2x M3 x 25mm (for the clamp around the charger)13 M3 Nuts&nbsp;AssemblyLet&#39;s get started! We&#39;ll assemble the main face clamp first. Using 2 m3x20mm screws and 2 m3 nuts. Insert the charger and tighten everything up so it&#39;s securely clamped in place.<figure class="image image_resized" style="width: 45.67%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000460577/design/2024-05-11_b4319f3ed7ce8.png"></figure>Next we&#39;ll secure the charging clamp/face to the ring. We&#39;ll use 4 m3x12mm screws and 4 m3 nuts.<figure class="image image_resized" style="width: 44.76%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000460577/design/2024-05-11_e2748d80fb755.png"></figure>Let&#39;s connect the top ring and base together using the Y bracket. Use 2 m3x16mm screws for the wrist bracket, and 1 m3x12mm screw for the base connection. Use 3 m3 nuts to secure all the screws. The nuts can be a little fiddly to get in place in the ring.<figure class="image image_resized" style="width: 59.26%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000460577/design/2024-05-11_e4359acd4ba54.png"></figure>Two more steps and we&#39;re done! Let&#39;s connect the feet now. We&#39;ll use 3 m3x12mm screws for 3 of the feet. The 4th foot incorporates a wire clip, which is an optional install. If you choose not to use the wire clip, then you&#39;ll want 4! m3x12mm screws for the feet. For our instruction today though, we&#39;re using the wire clip, so we&#39;ll only be using 3 m3x12mm screws, along with 3 m3 nuts.&nbsp;For the feet, the nut sits pretty deep, so you&#39;ll have to make sure you push the nut up enough as you tighten the screw, to help it catch.<figure class="image image_resized" style="width: 60.76%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000460577/design/2024-05-11_51c352a07f58e.png"></figure>Lastly, the wire clip! Keep that wire secure and routed towards the back. This is an optional part! The main frame is built in a way to allow it&#39;s use or not. We&#39;re going to use it though, so we&#39;ll want a m3x20mm screw and m3 nut. We&#39;ll assemble it as we did the other feet, just with the clip in place now!<figure class="image image_resized" style="width: 61.4%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000460577/design/2024-05-11_a86fb865b949.png"></figure>That&#39;s it! Enjoy!-------If you like my work, consider showing your love by <a target="_blank" href="https://www.buymeacoffee.com/josh3d" rel="nofollow noopener">Buying me a coffee</a>. Additionally, if you&#39;re looking to sell prints of my design, please check out my <a target="_blank" href="https://www.patreon.com/josh3d/" rel="nofollow noopener">Patreon</a> page for more information. on.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

Apple/Samsung Galaxy Watch Stand - Industrial

apple

LorenzCR

Auto tuning fin to be glued with 3M double-sided tape.Dimensions:Height 65mmLength 170mmWidth 70mm

Fin auto tuning

coche

BC Designs

Based on the popular measuring tool and pinching the idea from another model to make this wallet size. The previous model had sunken text and I wanted raised text for a 1 colour change print on the Bambu X1C.&nbsp;The included 3mf file is setup at 0.16 layer height and set for a 2 colour change print. If you are printing manually change colour on the last 2 layers.&nbsp;&nbsp;

Screw measuring tool. Wallet edition. M2-M10, 4-86mm

tools

Sakul

Foldable clothes hanger for cars A foldable clothes hanger that can be attached to your car&#39;s headrest.When not in use, the hanger can be folded by pressing a button, making it more compact. The hanger is attached to the metal bars of the headrest. I made sure that the hanger is adjustable so that it fits most car models. The only parts needed to build it are 4 M3x16 and 2 M4x40 screws. How to build: Choose the appropriate connectors for your car seat, I have added more versions to the raw 3D files. However, I think the ones included in the print profile should already work with most car models. Stick the connectors into the large U-piece and screw in the 2 M4 screws from below.You can screw everthing direct into the plastic, it will be plenty strong. <img src="https://makerworld.bblmw.com/makerworld/draft/834469/2024-04-07_ae823e1776ce7.jpg"> Attach the right and left hanger to the front panel as shown in the picture. <img src="https://makerworld.bblmw.com/makerworld/draft/834469/2024-04-07_cf9dfe27eb679.jpg"> Screw on the back plate with the 4 M3 screws. <figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/834469/2024-04-07_5ec0f3fe7cb4c.jpg"></figure> Lastly, simply insert the U-piece into the back plate from below. Now all you have to do is attach the clothes hanger to your headrest. <figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/834469/2024-04-07_c863e7704a613.jpg"></figure>&nbsp;

Foldable Clothes Hanger for Cars

viaje

Jorge Vega Gz

heres a keychain i made for you, people, enjoy :) .

Sukuna´s Finger (Keychain)

jujutsu kaisen

Galactic Armory

Make your own Galactic Armory themed Spartan helmet!&nbsp;Based off concept art from GC_ConceptArt, this is an envisioning of the classic Galactic Armory logo with a Halo Spartan helmet!&nbsp;The faceplate is able to be removed with the help of 10mm x 3mm circular magnets!&nbsp;Includes both assembled and pre-separated versions for easy printing.&nbsp;Use the visor cutout template to trace an outline on your visor material. Then slot the cut out shape into the pre-modeled ridges on the inside of the helmet!&nbsp;You'll also find the large parts have been pre-cut for smaller printers.&nbsp;If you would like to use these files for commercial use, please subscribe to the "Specialist" tier of my Patreon here: https://patreon.com/galacticarmory

Galactic Armory Spartan Helmet

casco

Kopp3D

An antique looking skeleton key with a skull and crossbones to be used as a prop for Halloween or Pirate parties. Prints in two flat pieces that need to be glued together. Can be fit onto a keyring.

Skeleton Key with Skull and Crossbones for Dungeon or Pirate Treasure

llaves

MiniWorld3D

<h2>🇪🇸 Benvinguts a Barcelona!</h2><h4>Welcome to Barcelona!</h4>One of MiniWorld3D&#39;s most popular models is now on Maker World! Our Sagrada Familia model has been printed by makers all around the world for years.&nbsp;This model comes in two versions:<ol><li>Combined, single STL depicting the building as if completely finished. </li><li>Parts for each section, that assemble together. An option to have incomplete towers that recreate the building in its current state is available. A simple construction crane model is also provided.</li></ol>See Printing Details below for more info. &nbsp;The Basilica and Expiatory Church of the Holy Family, or as it is known in Barcelona and Spain, La Sagrada Familia, has been in construction for over 130 years and is currently at around 75% completion, so some years remain! Started in its current design in 1883, when Catalonian architect Antoni Gaudí took over, it has been slowly built entirely funded by private donations and visit tickets. Its construction slowed down during the Spanish Civil War (1936-39) and during the covid-19 pandemic, pushing the estimated completion date past the original deadline of 2026. The building is full of Christian and Biblical references. As with most western churches, the blueprint is a Roman cross. The first façade built features the Nativity, you can even see Mary, Joseph and the baby Jesus surrounded by many figures, and a Christmas Tree on top. The second façade built was the Passion, full of sharply carved statues depicting Jesus&#39; last hours and crucifixion. The third and frontal façade, the Glory, has not been built yet, but it will depict Jesus&#39; ascend to Heaven. Each façade has four towers, for a total of 12, one dedicated to a disciple. The next tier of towers, ranked by height, will be four dedicated to each one of the Gospels. Lastly, the next two towers will be Mary&#39;s, and finally Jesus&#39;, the tallest of all.Gaudí&#39;s design that combines Gothic and nature-inspired Art Nouveau, as well as the project&#39;s titanic magnitude have been controversial over the decades, but it is undoubtedly an attraction that has become a symbol of Barcelona (from <a target="_blank" href="https://en.wikipedia.org/wiki/Sagrada_Fam%C3%ADlia" rel="nofollow noopener">Wikipedia</a>). &nbsp;This model was originally created by <a target="_blank" href="https://www.printables.com/social/15573-dany-sanchez/about" rel="nofollow noopener">Dany Sánchez</a> &amp; <a target="_blank" href="https://www.instagram.com/elmiaumau/" rel="nofollow noopener">Brian Mauricio Sánchez</a>.&nbsp;MiniWorld3D is happy to bring this model to life as a homage to all the people of Barcelona and Spain. This model was created from scratch by hand and brain in parametric software to ensure printability, using photographs and blueprints to create a beautiful and stylized version of your favorite landmarks. Please give credit, it&#39;s all about spreading culture! &nbsp;Consider joining our Printables.com Club, or our Patreon!<a target="_blank" href="https://www.printables.com/@MiniWorld3D" rel="nofollow noopener">printables.com/@MiniWorld3D</a> <a target="_blank" href="https://www.patreon.com/MiniWorld3D" rel="nofollow noopener">patreon.com/MiniWorld3D</a>Find all our profiles, YouTube channel &amp; social media on:<a target="_blank" href="https://linktr.ee/miniworld3d" rel="nofollow noopener">linktr.ee/miniworld3d</a>Join our 40K followers on IG!<a target="_blank" href="https://www.instagram.com/miniworld3d/" rel="nofollow noopener">instagram.com/miniworld3d</a>Brian&#39;s profile:<a target="_blank" href="https://www.instagram.com/elmiaumau/" rel="nofollow noopener">instagram.com/elmiaumau</a> MiniWorld3D is a collective of 55+ artists creating the best library of 3D printable models of landmarks of the world! Photo credits: Alessandro Parolin, Andrey Popov, Blake, Francisco Artal, Nathan, Saruman, W L, Xiang, and Dany Sánchez.-----------<h4>Printing Tips</h4>Suggested parameters: For better details, print slow, such as 20mm/s for outer perimeters. Fine-tune retraction to avoid stringing. Perimeters: 2 Top layers: 3 Infill: as low as 12% No supports needed for most parts, this has been optimized to eliminate all overhangs.Only the Glory facade needs supports. Print the construction crane flat on the print bed and assemble after by inserting the crane on the base.

Sagrada Familia - Barcelona, Spain

monumentos

ondrej.vesely89

EDIT 6. 10. 2023 - Added magnetic door closing holder and fxed missing holes in cutted panels.EDIT 5. 10. 2023 - Added modified front panel designed for stock display installation, including modified door panels and printable display mount.For assembly, I recommend inserting M3-5x3mm insert nuts into holes with a diameter of 4.5mm. The panels can be exchanged for another material (dibond, foam PVC and others with a thickness of 3 mm)In order for the door to remain closed, it is necessary to stick a 1mm magnetic foil on the "magnetic_foil_lolder" part and on the door.To connect the display, you need to purchase an extension cable. For example: https://www.aliexpress.com/item/32882168880.html?spm=a2g0o.detail.0.0.5a2cLqkMLqkM1r&gps-id=pcDetailTopMoreOtherSeller&scm=1007.40050.354490.0&scm_id=1007.40050.354490.0&scm-url= 1007.40050.354490.0&pvid=e1110eea -2d51-4f4a-b8e9-f8745f2e1b38&_t=gps-id:pcDetailTopMoreOtherSeller,scm-url:1007.40050.354490.0,pvid:e1110eea-2d51-4f4a-b8e9-f8745f2e1b38,tpp_buckets:668%232 846%238115%232000&pdp_npi=4%40dis%21CZK %2131.80%2127.05%21%21%211.34%21%21%402101e9ec16965925633654609ea975%2165587803085%21rec%21CZ%211875370703%21This product is under development and subject to change.

Ender 3 Enclosure

Ender 3

Rubiksensei

Another Millenium Sarchophagus Deckbox, but with my new constant format to be compatible with the <a target="_blank" href="https://makerworld.com/en/models/403534#profileId-305190" rel="nofollow noopener">inserts</a> !You can also check out my foldable <a target="_blank" href="https://makerworld.com/en/models/491147#profileId-404638" rel="nofollow noopener">Dice TowerBox</a> made to fit inside my deckboxes 😉&nbsp;Up to 130 double-sleeved cards (200 simple-sleeved or 400 sleeveless, 82×96×76mm). No problem to store Yu-Gi-Oh cards as well as Magic and Pokemon.Magnetic enclosure with 8 pressure fitted 3×5ømm magnets.&nbsp;💾 Files included 💾 - Body box- The lid- A divider- A test piece (check printing setting bellow for details)&nbsp;💵 A word to pro-printer/seller 💵This files is a private usage only, but if someone want to add it to their shop, feel free to contact me or directly sub to my <a href="patreon.com/Rubiksensei" rel="nofollow">Patreon </a>!Also, attribution is mandatory. Just add my <a target="_blank" href="https://www.instagram.com/rubiksensei/" rel="nofollow noopener">Instagram</a> (@rubiksensei) and/or my <a target="_blank" href="https://cults3d.com/en/users/Rubiksensei/3d-models" rel="nofollow noopener">cults3d</a>/<a target="_blank" href="https://makerworld.com/en/@Rubiksensei" rel="nofollow noopener">Makerworld</a> page link at the end of the product page.&nbsp;📝 Updates 📝2024-06-15 No changes to geometry but print profiles. Updated and optimized print profiles for P1/X1, A1 and A1mini added.

TCG Deckbox - Millenium Edition

magic 

B1g Dav3

@TechSpiderbot created a remix of 十塚翔 [244's workshop]'s model of Yu-Gi-Oh! Millennium Puzzle (uploaded in aug2020) in which he modified it back into the Millennium Puzzle. Due to the various angles (and wanting to create plates of prints) - I added my work of selecting proper alignment (NOTE: You will need to use supports - I chose (auto) Tree Organic and they were easy to remove). Also - be sure to use the smooth plate (non-textured) so that all of the sides are uniform in texturing. I used Overture3D Silk Gold PLA

Yu-Gi-Oh! Millennium Puzzle Remix - Printable Plates (arranged properly)

yu gi oh 

jakubhroch

Harry Potter - Dombledore coaster

harry potter

kingroon

兔叽的万事屋

背面有铭文的成龙历险记十二生肖符咒喜欢的话就收藏点赞一下吧！The Dragon Quest with inscriptions on the back and the twelve zodiac talismansIf you like it, just bookmark and like it!

符文版 成龙历险记十二生肖符咒  Rune versionJackie Chan's Adventures: Twelve Zodiac Charms 

jackie chan

Letzride

Say goodbye to cardboard spool problems! Say goodbye to respooling messes, say goodbye to electrical tape, caps, and 500 different spools you need to store and sort through when you buy a new brand of filament that comes on a cardboard roll.&nbsp;This spool is designed to be the exact same size as the Bambu spools so it fits perfectly in the AMS and allows the unit to close properly helping to keep your filament dry. It prints in 3 pieces. 2 sides are exactly the same (so print 2 of them) and have a threaded end and a swappable center adapter to perfectly fit the inside of any cardboard spool that corresponds to it's size. I am making and adding adjusted center adapter sizes as I come across different cardboard spools.&nbsp;How does it work?&nbsp;<ul><li>Gently rip off the side of any cardboard spool. This takes next to no effort on the cardboard spools. Clean up the loose cardboard with your hands so you have your center hole exposed. (below photo shows the universal center adapter test fit into the center. You can place it in first and then screw the side on, but I find it easier to screw the side on first. This was just to demonstrate the fit) <img src="https://makerworld.bblmw.com/makerworld/draft/714924/2024-01-30_8b8742166935c.jpg">  </li><li>Measure the size of the center hole so you can pick the right center adapter to use</li><li>Screw one side of the center adapter onto the universal spool side and insert the center adapter into the cardboard. This is a friction fit. You'll be able to turn the spool on the adapter by hand but it will require some pressure</li><li>Carefully flip the spool around and rip the other side of the cardboard off. Then screw on the other side of the universal spool side.</li><li>Done! To remove the filament, simply unscrew the sides and remove it.</li><li>Optional - Place a standard Avery 1" x 2 5/8" label (6460 code) to identify your filament type in the dedicated area on the spool. See model photos</li></ul>&nbsp;Current universal adapters:<ul><li>82mm - Fits Bambu, Elegoo and Esun spools (others untested)</li><li>88.7mm Fits Overture and PolyTerra  spools (others untested)</li><li>76.25mm Fits Eryone spools (others untested)</li></ul>Test Size Universal Adapters:&nbsp;To save you time and money, I created <a target="_blank" href="https://makerworld.com/en/models/174865#profileId-192302" rel="nofollow noopener">miniture 7.5mm tall universal test adapters</a> so that you can quickly print the various size adapters and insure that the fit on your spool works. These are the same size as the universal adapters except much shorter.&nbsp;If you measure your other spool centers for other brands and send me a message, I can add more universal adapters for use, but you must be willing to test fit, send me photos and provide feedback so others can also benefit.&nbsp;******All my print profiles are weighted so that the spool stays within 240-250g in weight when complete so that there are no problems with the AMS from your spool being too light.*******&nbsp;PETG profiles to follow!

Ultimate "FlexFit" Universal Spool 

Randomizy

新年好! 🐲 2024 🐲 New Year, New Mascot!&nbsp;Here's the Maneki Tatsu (Lucky Dragon), a captivating blend of mythical charm and good fortune.&nbsp;Just like its feline counterpart known as Maneki Neko, I created this dragon figure in a welcoming pose, one paw elegantly raised to invite good fortune and blessings, while the other paw rests firmly on the gold plate, symbolizing stability and financial well-being.&nbsp;The dragon's eyes sparkle with friendliness and its gentle smile radiates an aura of benevolence.&nbsp;Whether gracing the shelves of homes or businesses, I hope the Maneki Tatsu can bring only positive energies and repel any negativity for this year.&nbsp;May this adorable puffy darling bring peace and prosperity to all! 🐲- - -Support needed, mostly under its chin and the upper paw.---For any inquieries, please don't hesitate to contact me.---Please don't be shy and upload your make!(If you share it on your socials, please be sure to tag : @randomizy.3d [FB / IG] ; @randomizy3d [Twitter / Tik Tok] so that I can see it!)---Check out my Instagram to see all of my works: <a target="_blank" href="https://www.instagram.com/randomizy.3d/" rel="nofollow noopener">https://www.instagram.com/randomizy.3d/</a>---If you like my work and would like to support me so that I can bring you new content, receive exclusive benefits and models, and you're interested in having a commercial license for selling your physical printouts of my designs (not files), please consider checking out my link: <a target="_blank" href="https://linktr.ee/Randomizy" rel="nofollow noopener">https://linktr.ee/Randomizy</a>

Maneki Tatsu (Lucky Dragon)

japon

plucbernier

Simple cage for mobile photography or videography. You will need to provide a phone holder. all holes are threaded with 1/4 20 or 3/8 16 threads. Good for mobiles or small mirrorless cameras.&nbsp;See my other print «Phone Cage NATO handle» for a simple, compatible handle to fit the cage.

Cage for phone photograhpy or small mirrorless cameras

iphone

adsodom

Cartel “WANTED One Piece”&nbsp;Imprimir al 100% de relleno con una altura de capa de 0,08 mm con una capa base de 0,16 mm&nbsp;Filamentos usados: PLA 3DFILSO NEGRO Distancia de transmisión: 0.3 PLA SAKATA PLATA Distancia de transmisión: 0.4 PLA SMARTFILL RECICLED AMARILLO Distancia de transmisión: 6 PLA SAKATA BLANCO Distancia de transmisión: 6&nbsp;INSTRUCCIONES DE CAMBIO DE FILAMENTO: Iniciar con Negro En la capa #7 (0.64mm) cambiar a PLATA En la capa #11 (0.96mm) cambiar a AMARILLO En la capa #16 (1.36mm) cambiar a BLANCO hasta el final&nbsp;NOTA-- El color amarillo se puede cambiar por un color marrón arena y aquedara aun mejor, pero no tenia ese color&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA 3DFILSO Black Transmission Distance: 0.3 PLA SAKATA Silver Transmission Distance: 0.4 PLA SMARTFILL RECICLED Yellow Transmission Distance: 6 PLA SAKATA White Transmission Distance: 6!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Silver At layer #11 (0.96mm) swap to Yellow At layer #16 (1.36mm) swap to White for the rest. NOTE-- The yellow colour can be changed to a sandy brown colour and it will look even better, but I didn't have that colour.&nbsp;

WANTED One Piece HUEFORGE

one piece

mikolaj.mazik

If you like my work, please consider leaving a small donation, it will help me create more and more interesting models!<a target="_blank" href="https://ko-fi.com/mikolajmazik" rel="nofollow noopener">https://ko-fi.com/mikolajmazik</a>&nbsp;Hello, today I present to you a model of the Liebherr ltm1060 mobile crane . It has movable wheels. This is the first prototype, prepared for gluing with plastic glue, subsequent versions will have versions with screw holes and movable front wheels. A remote-controlled version will appear in the future. Not all tolerances may be correct.Feel free to scale it up or down, if so, you may need to use toothpicks or something like that as an axis.&nbsp;

LIEBHERR LTM1060 Mobile Crane- Fully 3D Printable 

vehiculos

Kevbot.

This one will definitely be a fan favorite with kids and adults! I wanted to create a grenade toy that exploded when it hit something. After a lot of thought, I decided to design it using magnets (16 in total).&nbsp;I first created the grenade, and then I broke it into pieces like a puzzle. After that, I added the holes for the magnets, and now we have a functioning toy grenade! It is quite fun to use, and I&#39;m excited for you to try it out! Keep in mind that it&#39;s very easy to lose the pieces because they go flying everywhere, but its worth it lol.&nbsp;I made five files that make up the grenade. The bottom section, middle piece, top section, handle, and pin.I didn&#39;t put all of them on the same build plate to make keeping track of the magnets direction (polarity) easier.&nbsp;This model is for PERSONAL USE ONLY, if you want a commercial license and access to more awesome models you can get it on my patreon <a target="_blank" href="https://www.patreon.com/kevbot_3d" rel="nofollow noopener">https://www.patreon.com/kevbot_3d</a>&nbsp;<figure class="media"><div data-oembed-url="https://www.youtube.com/shorts/FOG56Bdk3ck"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=FOG56Bdk3ck"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/FOG56Bdk3ck" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>&nbsp;Print Setting:&nbsp;I recommend printing the bottom pieces first, then moving to the middle piece, then the top pieces, followed by the handle and the pin. I will have 3MF files for each piece with all the settings I used to print them (including the stops needed to embed the magnets into the print).I recommend 30% infill or less. If you do more infill, the magnets might not be strong enough to stick to each other.You will need 16, 6 by 3mm Neodymium Magnets. These are the magnets I use if you are interested:&nbsp;60 Pack on Amazon: <a target="_blank" href="https://amzn.to/47pQFaj" rel="nofollow noopener">https://amzn.to/47pQFaj</a>100 Pack on Amazon: <a target="_blank" href="https://amzn.to/3Sa8beg" rel="nofollow noopener">https://amzn.to/3Sa8beg</a>&nbsp;If you don&#39;t know how to orientate the magnets please message me and I will put a video together if needed.You can also purchase key rings to attach to the pins here:<a target="_blank" href="https://amzn.to/3tSN6f4" rel="nofollow noopener">https://amzn.to/3tSN6f4</a> &nbsp;ScalabilityI would not scale it up but you might be able to scale it down a little bit.&nbsp;Supports Needed?No&nbsp;Thank you for the support! More designs are on the way and if this design is a hit, I will most likely make some variations.Happy Printing!Cheers,Kevin&nbsp;Disclaimer: Some links in this description may be affiliate links. This means I may earn a small commission if you click them and make a purchase. It&#39;s no extra cost to you, but it truly helps me to keep producing free designs. Thank you!

Toy Exploding Grenade!

Scrabble

A specific version of the "Under Desk Drawer" 2.0" by milans:<ul><li>I printed the solid body, but the front is sliced with a fuzzy skin for a different look!</li><li>Hex handle + rails oriented at 45 degree angle to align the top pattern, so it glides smooth.</li></ul>Needs two M3 bolts for the handle. I used Tesa tape to stick it to my desk.

Under Desk Drawer 2.0 by milans - sliced with a fuzzy front

herramientas

zuperbuuworks

<h3>VERSION 2 OF SHENRON IS NOT ON MAKERWORLD. THE VERSION FOUND HERE NO LONGER RECEIVES UPDATES.</h3>--What&#39;s Changed in V2?-- Version 2 has been made from scratch, with improved link design, greater detail, and more accurate source material features.--What&#39;s New in V2?-- The arms and legs now have articulation via ball-and-socket joints, and come in two flavours; a 4 joint design or a single joint design, for simplicity. The jaw now opens and closes, and has inner-mouth detailing. There is an optional head with whiskers already meshed onto it, or you can use filament strips on the other head type, which has holes to insert the strips into.--Anything Else?-- Whilst version 1 of Shenron was, and will remain, free to download, the Version 2 model will be a paid-for model. Provided as STL files, with a full-colour 3MF painted in Bambu Studio included.The model will be for sale ONLY and found on the following pages: https://www.printables.com/@zuperbuu_1527797 https://cults3d.com/en/users/zuperbuu/3d-models https://www.patreon.com/thomastedwardsSHENRON V2 WILL NOT BE UPLOADED ANYWHERE ELSE: if you see it on MakerWorld, Thingiverse, or any other page that isn&#39;t one of the above 3 URLs, it will have been STOLEN and should be REPORTED.<h4>IMPORTANT: If you use a P1S/P1P and experience issues printing the top of the head, please configure the print profile speed to 80mm for the outer wall, and give the model 3 walls. (thank you user PavorMaker who helped figure this fix out.) If you use the Textured PEI plate, a brim is necessary regardless of what machine you use. A brim is not needed if you use the Cool Plate in an enclosed machine, that has a stable temperature.</h4>This Shenron model comes in two sizes; short, and long. The short dragon has 12 joints down its body, the long has a whopping 31 joints!The whiskers are just strips of filament that I have glued into the holes on the side of the muzzle, a filament size of 1.75mm fits in the holes nicely.I printed mine without a brim; providing your hotbed is clean/freshly glued, you shouldn&#39;t need a brim either. Supports are not needed for this model; do not use them or the model can break when you remove it from the supports!&nbsp;Be aware that the long version of the model gets VERY close to the plate edges, so you won&#39;t be able to make this model any larger. I wouldn&#39;t print it any smaller as the joints will likely lose strength.&nbsp;Pre-painted/coloured versions are also available!&nbsp;The joints can move in almost all directions, though the hips have the least movement. The arms and legs do not move.You can see the range of movement in this video:This file covers PERSONAL use. If you want to sell prints of this model, please subscribe to my Patreon: https://www.patreon.com/thomastedwards

Articulated Shenron Dragon Toy

dragón ball

Print your own scale model Clone Trooper!&nbsp;&nbsp;This model comes in 2 pre-exported scales - 1:12 and 1:48&nbsp;&nbsp;The 1:48 scale model is more geared towards resin printing for wargaming but the 1:12 model works great for printing on an FDM printer!&nbsp;&nbsp;Find 19 other poses for this figurine with alternate heads on my Patreon:<a target="_blank" href="https://patreon.com/galacticarmory" rel="nofollow noopener"> https://patreon.com/galacticarmory</a>

Clone Trooper Figurine - Heavy

star wars 

JabbaTheDuck

Set size to 465mm, cut into 3 pieces to fit on an Ender 3 and added connectors to make assembly easy. Set to 10% Gyroid infill on Pursa.&nbsp;&nbsp;

Barad-dûr (Sauron's tower) dice tower

lotr

Demamba Prints

was originally a commission and noticed that their are not many models of this mask and I wanted to contribute to solving that problem.Designed to be wearable thus the bigger eye holes.

White Mask of Obito

naruto

FankoPRINT

Venomized spiderman head. The best headphone holder for lovers spiderman or venom! Print it, follow, like.

Venom/spiderman Headphone stand

marvelDc

hanysX

You all know and love the Star Wars Universe! Immerse yourself with this one-of-a-kind astromech seen regularly throughout Star Wars Skywalker Saga! Simple print, you can scale down to 25% for a desk topper or keep it at the provided scaling for an awesome room decoration! Supports are suggested!

Star Wars R2-D2

starwars

Xander Designs

Check out our new Fortnite Models:Victory Crown Pillow- <a target="_blank" href="https://makerworld.com/en/models/182885#profileId-201478" rel="nofollow noopener">https://makerworld.com/en/models/182885#profileId-201478</a>Fortnite Gift Box- <a target="_blank" href="https://makerworld.com/en/models/171979#profileId-188799" rel="nofollow noopener">https://makerworld.com/en/models/171979#profileId-188799</a>&nbsp;Update: 21/02/2024Due to the small black border pieces being hard to print and glue together for some, i have redesigned the model to incorporate these in a base plate making it super easy to glue together.&nbsp;Update: 03/01/24As Requested Pre-painted Print in place AMS Profile added, no need for glue as the sign will friction fit the base.Plate 1 does require 5 different colors so you would need more than 1 AMS Unit, unless you change the light blue to white then you can print with 1 AMS.…………………………………………….&nbsp;This is a must have Trophy for any Fortnite enthusiast.Designed to be printed on standard machines so no need for AMS.Sliced on 5 individual colored plates that match the original logo but feel free to mix up the colors.Glue is required to fix the parts together.&nbsp;Sell my prints commercially by joining my <a target="_blank" href="https://patreon.com/xanderdesigns?utm_medium=unknown&amp;utm_source=join_link&amp;utm_campaign=creatorshare_creator&amp;utm_content=copyLink" rel="nofollow noopener">Patreon</a>Want to say ‘Thank You’  <a target="_blank" href="https://www.buymeacoffee.com/xanderdesigns" rel="nofollow noopener">Buy me a coffee</a><figure class="media"><div data-oembed-url="https://www.youtube.com/shorts/Kmmdzij6lG8"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=Kmmdzij6lG8"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/Kmmdzij6lG8" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>&nbsp;

Fortnite Trophy #1 Victory Royale

trofeos

BODY3D

This waste really makes 3d printing sad ! So I created a little waste Eater to make it a little more joyful haha =)&nbsp;And of course, it is printable without supports !&nbsp;If you like these model, don't hesitate to like and follow =)&nbsp;IMPORTANT :&nbsp;If you want to sell 3D prints from my designs&nbsp;Please become a Patreon here : <a target="_blank" href="https://www.patreon.com/BODY3D" rel="nofollow noopener">https://www.patreon.com/BODY3D</a>&nbsp;Or Become a Triber here : <a target="_blank" href="https://www.myminifactory.com/users/BODY3D" rel="nofollow noopener">https://www.myminifactory.com/users/BODY3D</a>&nbsp;All my Links : <a target="_blank" href="https://beacons.ai/BODY3D" rel="nofollow noopener">https://Beacons.ai/BODY3D</a>

Waste Eater ( A1 Mini )

a1 mini

topxnbo

requested by my 6 yo son, I was looking for Pokemon trophies, but none of the ones I found had good enough detail to replicate the original anime details, so i took the picture and re-drew everything from scratch.&nbsp;&nbsp;In the spirit of reducing Bambu poop, i designed the wings to be glued on, but if you don't want to glue things, I have included an All-in-One version, basically removing the 0.2mm clearance I added between the ball and the wings.&nbsp;&nbsp;The original anime showed the base in maghogany or burgundy color, which is not something I have on hand, so I defaulted to black. also, my Xmas filament pack hasn't arrived (I ordered on the second batch, sad face), so I used some silky gold, instead of the sparkly gold, which would look amazing on this model, but I'm pretty pleased with how this one turned out&nbsp;&nbsp;as you can see, I got lazy and used auto-tree support, which didn't work out perfectly for me. took me a while to remove all the support, and had to use a soldering iron for some final touches. maybe I'll break this into additional pieces once my Xmas pack arrives for a finer look.&nbsp;UPDATE 12/23&nbsp;I have added a plain plaque that you can add whatever text you want, and glue onto the base of the trophy. it has four stud to appear as if it's a screwed on plaque.&nbsp;UPDATE 12/27&nbsp;added a wingless version as per requested.

Pokemon Trophy with Wings, Orange League Winner's Trophy

pokemon

geeklabs

A bad#ss headphone stand if you like Kratos!

God of War Kratos head, headphone stand

God Of war

Eskalibure

J'ai réuni ici le meilleur des pièces de Olaf en réunissant le merveilleux travail de <a target="_blank" href="https://www.thingiverse.com/JamesRX" rel="nofollow noopener">JamesRX</a> et l'adaptation de <a target="_blank" href="https://www.thingiverse.com/andrewwu" rel="nofollow noopener">andrewwu</a>&nbsp;&nbsp;&nbsp;Happy snowman Olaf from the movie Frozen. No extra support is needed.Sorry for separating the model in so many parts, as I want to keep as much detail as possible with minimum support. Please follow the assembly instructions to build, remember to glue the right foot as the last piece to adjust the balance, it should stand firmly just by one foot.High-res model has updated. Full body model, non-pre-supported model and adhesion tenon were added as request.Have Fun :)&nbsp;&nbsp;&nbsp;La tête a été adaptée par <a target="_blank" href="https://www.thingiverse.com/andrewwu" rel="nofollow noopener">andrewwu</a> afin de permettre une impression multicolore avec des pièces séparées&nbsp;<ul><li>Adjust eye brow angle to bed surface.</li><li>Copy right eye brow hole to left side.</li><li>Rescale eyes to 97%.</li><li>Fill hole of head back.</li></ul>&nbsp;&nbsp;Vous pourrez augmenter la taille a 300% et dans ce cas je vous conseil de rajouter 1 wall&nbsp;&nbsp;&nbsp;&nbsp;<h4>License</h4><h4>CC BY-NC-SA</h4><a target="_blank" href="https://www.thingiverse.com/thing:440343" rel="nofollow noopener">Olaf - I wanna build a snowman!</a> by <a target="_blank" href="https://www.thingiverse.com/JamesRX" rel="nofollow noopener">JamesRX</a> is licensed under the <a target="_blank" href="https://creativecommons.org/licenses/by-nc-sa/4.0/" rel="nofollow noopener">Creative Commons - Attribution - Non-Commercial - Share Alike</a> license.&nbsp;CC BY<a target="_blank" href="https://www.thingiverse.com/thing:3305163" rel="nofollow noopener">Olaf (modified head)</a> by <a target="_blank" href="https://www.thingiverse.com/andrewwu" rel="nofollow noopener">andrewwu</a> is licensed under the <a target="_blank" href="https://creativecommons.org/licenses/by/4.0/" rel="nofollow noopener">Creative Commons - Attribution</a> license.&nbsp;&nbsp;

Olaf - I wanna build a snowman!

disney

Wickieprints

I made this awesome One Piece Keychain. Use AMS for multicolor. Enjoy.&nbsp;You can sell our designs we made and are available on our makerworld page. Wit a small sub on our Patreon you get a commercial license to sell and back our non profit founding for Children with special needs: <a target="_blank" href="https://www.patreon.com/wickieprints/posts" rel="nofollow noopener">https://www.patreon.com/wickieprints/posts</a>

One Piece Keychain

cocina

eds_3d_shop

🙏😊💬Quote from user feedback: &#34;…finally a design that is minimally invasive and works well all the time, does not fall down during operation, without danger of destroying LED and without having to stick some constructions on the first-stage-motors with double-sided adhesive tape!&#34; &nbsp;⚠️Working on this complicated model takes a lot of time and if you like my work and want to support me and this design - please BOOST this design (click on the small Rocket 🚀 or „BOOST“ button) 🙏👍 Thank you in advance!🙏&nbsp;! Please take bed adhesion very seriously when printing these little helpers, use 3DLAC OR GLUE STICK if necessary, BUT not BRIM, if you will nice Logo quality! In my printprofile the color sequence is set so that the logo color is printed first in order to get very nice, sharp contours. When BRIM is switched on, Brim will also be printed in LOGO color and unsightly marks will be left on the edges !&nbsp;Important! There are several reports that AMS units, that arrived to users from 08.2023 had a slightly changed configuration of the feeding funnel. The AMS Funnel Buttons on the new units are thicker.Please check the thickness of AMS Funnel Buttons before printing the covers! If it is about 1mm thick - then you are in the right place! If the thickness is more than 1mm (should be about 2mm thick) - then take <a target="_blank" href="https://makerworld.com/de/models/49581#profileId-51430" rel="nofollow noopener">this version for the new revision of AMS feeding funnel</a> with the straight PTFE channel.<h3>UPDATE from 26.11.23: The NEW Version 3.0 is universal for all current revisions of AMS - feel free to check out the version too!</h3><figure class="table" style="width: 82.77%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><h3><a target="_blank" href="https://makerworld.com/en/models/74679#profileId-79072" rel="nofollow noopener">The NEW Version 3.0 with “Shield-Logo”</a></h3><figure class="image"><a href="https://makerworld.com/en/models/74679#profileId-79072" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-11-30_6fae77f588ae2.png"></a></figure></td><td><h3><a target="_blank" href="https://makerworld.com/en/models/79334#profileId-83866" rel="nofollow noopener">The NEW Version 3.0 with “Arrows-Logo”</a></h3><figure class="image image_resized" style="width: 96.77%"><a href="https://makerworld.com/en/models/79334#profileId-83866" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-11-30_a4414d961adf9.png"></a></figure></td></tr></tbody></table></figure><h3>UPDATE 30.10.2023</h3>I have added a new version 2.0, it fits the old and new revisions of AMS feeding funnel. Aside from that, in Version 2.0 the PTFE tube is inclined towards the spool. This should ensure even better filament guidance and is particularly perfect for Hymera Mod User to do not have any contact of PTFE with AMS Lid. You can find this <a target="_blank" href="https://makerworld.com/de/models/52774#profileId-54565" rel="nofollow noopener">v.2.0 of Perfect Fit Bambu Lab AMS Feeder Button Cover Protector for ALL revisions of feeding funnel HERE</a>!<figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width: 61.81%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-10-30_5cb9bb087c6f3.png"></figure></td><td><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-10-30_2e90df1fe8d49.png"></figure></td></tr></tbody></table></figure>&nbsp;<h3>Bambu Lab X1 AMS Feeder Button Cover/Protector - “Arrows” - Version</h3>I have read some reports that the abrasive filaments &#34;grind&#34; the feeders from AMS (which are themselves from the plastic) very quickly! And this problem may <a target="_blank" href="https://wiki.bambulab.com/en/x1/maintenance/replace-the-feed-funnel-assy" rel="nofollow noopener">affect the loading and unloading filaments</a> !<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-11-18_8517c1b993479.png"></figure></td><td><figure class="image image_resized" style="width: 96.15%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-11-18_ce81a7f51e7a7.png"></figure></td></tr></tbody></table></figure>I found an interesting feeder cap at Printables (thank you, Maverick Ng, for sharing your model! <a target="_blank" href="https://www.printables.com/de/model/360318-bambu-lab-ams-feeder-button-remix" rel="nofollow noopener">https://www.printables.com/de/model/360318-bambu-lab-ams-feeder-button-remix</a> ) and reconstructed it a little so that the cap sits very stable on the feeder and can still be easily pulled on and removed. Look at Installation-Video on my Instagram Channel - its very easy! :-) With the 10mm long PTFE tube in it, the feeders are now well protected! For printing of really abrasive filaments - take better 30mm PTFE tube - then PTFE inserts are rubbed off more slowly, as short one.&nbsp;Please read the print instructions carefully! They are important so that the small parts can be printed correctly and then sit and hold well on the feeder! If you have done everything right and the protectors should still fit too loosely - you are welcome to use the stiffer version - the jaws are 0.4mm thicker: <a target="_blank" href="https://makerworld.com/de/models/41859#profileId-42399" rel="nofollow noopener">https://makerworld.com/de/models/41859#profileId-42399</a><h4>Print / Install Instructions:</h4><ul><li>place them with the logo on the build plate</li><li>first layer line width: 0,35 (0.4 mm Nozzle)</li><li>first layer speed: 10ms per second (for perfect look of the button-surface)</li><li>2 perimeter, 4 top/bottom layer, 20% infill</li><li>take better PLA/ASA - they are stiffer, for better hold on the feeder</li><li>print layer height: 0.16mm and WALL generator: Classic (in this case please no Arachne) !!!</li><li>It is helpful to swith your Bambulab Printer from “Standard” Speed to “Quiet”!</li><li>If you have weak adhesion for PLA on your plate - feel free to use a gluestick or brim!</li></ul>Cool recomendation from User <a target="_blank" href="https://www.printables.com/de/@SHAYDED_915092" rel="nofollow noopener">SHAYDED </a>(Thank you! :-): “If you are struggling with sagging, move the parts closer to the aux fan, orient the overhang towards it, and crank it up to 70-100%”. I had no problems with sagging (just printed 4-5 of them at once and slow), but why not? :-)&nbsp;Take a look for Video/Post about this model on my instagram channel: <a target="_blank" href="https://www.instagram.com/eds_3d_shop/" rel="nofollow noopener">https://www.instagram.com/eds_3d_shop/</a>&nbsp;!!! Please take a look at this video, here you can see how you can easily get these protectors on the feeder properly!⚠️IMPORTANT!⚠️ You don&#39;t need to disassemble your AMS or remove any parts!<figure class="image"><a href="https://www.youtube.com/watch?v=B__yoIvm2HE" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-12-25_f39cd3895ac75.png"></a><figcaption><a target="_blank" href="https://www.youtube.com/watch?v=B__yoIvm2HE" rel="nofollow noopener">YouTube Video: Installation and removing of „Eds Perfect Fit Protector for BambuLab AMS Funnel-Feeder“</a></figcaption></figure>Short and cool description from User <a target="_blank" href="https://www.printables.com/de/social/35822-spectregadget" rel="nofollow noopener">SpectreGadget</a> : “Push forward with the back of the cap against the lever to snap it in place. Then line up an press firmly down to get over the existing inlet, until it snaps in place.”&nbsp;Please look at these pictures - good example of correct installation 👌😊👍<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2024-04-08_a801552bcd1f6.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2024-04-08_e60113e41f4b8.png"></figure></td></tr></tbody></table></figure>— ! —&nbsp;Thanks for downloading, rating in advance and please don&#39;t forget to like👍and to BOOST 🚀 this model! ;-)&nbsp;⚠️If you have an A1/A1mini with AMSlite - take a look at this design 🦾😊<figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2024-05-18_ccdb0c618a4df.gif"><figcaption> <a target="_blank" href="https://makerworld.com/en/models/467088#profileId-376126" rel="nofollow noopener">AMSlite PTFE Tube Easy-Clip-Connector</a> 🦾😊</figcaption></figure></td><td><figure class="image image_resized" style="width: 97.13%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2024-05-18_bfa54dc7f896d.gif"><figcaption> <a target="_blank" href="https://makerworld.com/en/models/467088#profileId-376126" rel="nofollow noopener">AMSlite PTFE Tube Easy-Clip-Connector</a> 🦾😊</figcaption></figure></td></tr></tbody></table></figure><h3>Take a look at my other very helpful designs for X1/P1P/P1S/A1/A1mini:</h3><figure class="image"><a href="https://makerworld.com/en/u/4051934936" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2024-04-08_9c244b209c063.png"></a><figcaption><a target="_blank" href="https://makerworld.com/en/u/4051934936" rel="nofollow noopener">🔗Eds_3D_Shop designs on MakerWorld 🔗</a></figcaption></figure>&nbsp;If you like my work and want to support me - please follow me and if you want - you can buy me a coffee! <a target="_blank" href="https://linktr.ee/eds_3d_shop" rel="nofollow noopener">https://linktr.ee/eds_3d_shop</a>Thank you for your support and.. happy printing!Ed ;-)&nbsp;&nbsp;

AMS Feeding Funnel Wear Protector!

BrandedAbstract3D

<h3>Model</h3>Drinks coaster set designed to resemble Brembo Racing Brakes, unique and functional, great for any workshop, desk, or garage. It's a great conversation starter for anyone who loves cars. Always adds a touch of car scene to your surroundings.&nbsp;To complete the phone holder you'll need:<ul><li>1 x Caliper (printable)</li><li>4 x Brake Discs (printable)</li><li>4 x Display Screws (printable)</li><li>1 x Brembo Vanity Plate (printable)</li></ul><h3>Print Settings</h3>I usually go for the BBL “Standard” 0.20mm settings. It seems to strike the right balance between quality and speed compared to other profiles. I'm a fan of the consistent layer height of 0.2mm, but variable layer height is good too! Feel free to play around with the print quality settings to see what works best for you. I've had success with BBL Filaments and various other brands, but for Silk PLA, slowing down the outer walls and top layers to around 50mm/s seems best.&nbsp;<ul><li>Caliper: Use a 15% rectilinear infill—it's sturdy enough to hold all four of the coasters. And, I set the seam position to “back”. Essentially can't see any of the seams from the front.</li><li>Brake Disc: Gone for a 5% infill, saving print time. I also read that a lot of the thermal transfer gets stopped by air so the more holes in the coaster the better (especially when using hot drinks) so I figured less infill could = less melted PLA. From the PLA I've used hot drinks work great on these coasters, the contact patch between the coaster and the cup/glass is actually remarkably small and hasn't melted anything at all! The bottom surface pattern is concentric to give it that super-consistent smooth look and the top layer is Archemedian Chords I find this gives the discs a nice partially worn look.</li><li>Display Screws: Use a 15% infill. This part is mostly for show and serves no real use other than aesthetics. I use a standard PEI Plate and haven't had a problem with them being knocked over while printing. If you do I'd suggest using a brim and that'll fix that issue.</li><li>Brembo Vanity Plate: There are two Brembo branded plates that you can stick on to the caliper. You can use CA glue to attach it, and it'll work perfectly. One plate has the Brembo logo upside down, simulating how it would be on an actual brake caliper. The other plate is right side up, making it easier to read the branding when the coaster is on your desk.</li></ul>Assembly is straightforward; you can easily get it from the photos. Insert the display screws into the holes, adding a dab of glue before inserting them. Apply some glue to the Vanity Plate and attach it to the front; it's super simple to align.&nbsp;Happy Printing!

Brembo Drinks Coaster Set

imprimir

neil3dprints

Please note this was a collab with Bambu Labs.The printer was provided free of charge for this project. Update 27/12/2022.I've made some amendments to the assembly guide PDF. Added some additional notes on the best way to print some of the parts as well as provided further detail to some sections of the installation process. I've also added a small L or R on the left and right side parts to help people distinguish between them for the MOD installation.I've also added step and stl files for blank ‘Round Side Parts’ in case anyone would like to add there own logo to them.Check out Uncle Jessy's build!&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/Gv7w95ECAoE"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/Gv7w95ECAoE" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;This is your new best friend!!!The companion cube mod is a must have for any Bambu Lab P1P owner. And any portal fan.This is purely a aesthetic MOD. You do not need to touch the electronics at all!I've provided a detailed assembly guide as a downloadable PDF. Just download this as you download the STL's. And please please please follow the instructions. It's not a complicated build. Allot of it is common sense. But there will be some instructions that would prove useful to follow in a particular order. I also recommend giving it a quick read before you start printing all of the parts.You will also require superglue for this build.I recommend a couple of spools of grey PETG. A couple of white pla. And a small amount of pink pla. Just refer to the sheet below<figure class="table" style="width:462pt;"><table style="border:1px double var(--input-border);"><tbody><tr><td style="border-bottom-color:rgb(191, 191, 191);border-bottom-width:1px;border-left-color:rgb(191, 191, 191);border-left-width:1px;border-right-color:black;border-right-width:1pt;border-style:solid;border-top-color:rgb(191, 191, 191);border-top-width:1px;height:33pt;padding:0.4em;vertical-align:top;width:462pt;" colspan="3">As a reference each 1 KG spool carrys an average of 330 meters</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);height:15pt;padding:0.4em;vertical-align:top;">Totals</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">Required Material In Meters ( Approx )</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">Grams ( approx )</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);height:15pt;padding:0.4em;vertical-align:top;">White - PLA</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">618.48</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">1843.07</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);height:15pt;padding:0.4em;vertical-align:top;">Grey - PETG</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">390.93</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">1192.34</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);height:15.75pt;padding:0.4em;vertical-align:top;">Pink - PLA</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">47.72</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">142.21</td></tr></tbody></table></figure>All parts are printable on a Bambu Lab P1P.But I did print on the slowest setting on the P1P.If you would like to use an AMS with this MOD, I've been informed you can so with the below additional MODs installed.To sit the AMS unit on top of the printer with the Companion Cube Mod installed.<a target="_blank" href="https://www.printables.com/model/397718-p1p-ams-legs-companion-cube" rel="nofollow noopener">https://www.printables.com/model/397718-p1p-ams-legs-companion-cube</a>To help guide the PFTE tube.<a target="_blank" href="https://www.printables.com/model/333616-bambu-lab-p1p-ptfe-tube-bracket" rel="nofollow noopener">https://www.printables.com/model/333616-bambu-lab-p1p-ptfe-tube-bracket</a> PTFE Tube Y-Splitter. <a target="_blank" href="https://www.printables.com/model/308131-bambu-lab-y-splitter-with-pc4-m10-pneumatic-connec," rel="nofollow noopener">https://www.printables.com/model/308131-bambu-lab-y-splitter-with-pc4-m10-pneumatic-connec,</a> this way you can run either AMS or spool.&nbsp;If anyone has any questions or queries, even if you might think it is a stupid question, seriously, just ask me. Send me a DM through Prusa Printers and I will get back to you ASAP. I want people to be able to print this. So if anyone is having any problems, just reach out. I'll be happy to help where I can.If you want to stay up to date with anything I am working on and are perhaps interested in other projects I have in development, please check out my instagram or Twitter.<a target="_blank" href="https://www.instagram.com/neil3dprints/?hl=en" rel="nofollow noopener">https://www.instagram.com/neil3dprints/?hl=en</a><a target="_blank" href="https://twitter.com/NHengist" rel="nofollow noopener">https://twitter.com/NHengist</a>Happy printing. ;-)Neil

Companion Cube P1P Mod ( Bambu Lab )

p1p 

jajaum3d

🌟 Support My Work & Unlock Exclusive Benefits!🌟 Become a patron on <a target="_blank" href="https://www.printables.com/@jajaum3d#join:64" rel="nofollow noopener">Printables.com</a> and gain access to early releases, commercial licenses, and more. See all my designs on cults: <a target="_blank" href="https://cults3d.com/en/users/jajaum3d/creations" rel="nofollow noopener">https://cults3d.com/en/users/jajaum3d/creations</a> All my designs are protected by Copyright Law. Purchasing does not grant the right to sell any digital file or printed model of my designs without explicit consent. Please respect the hard work of 3D artists by never sharing or selling digital files. Santa Claus and Mrs Claus Candle holder. For LED candles only No glue or extra parts needed, just print and play.<h4>Printing</h4>All files in STL to print without any support. The files are already in the best orientation to print and can be printed with your standard 0.2mm layer config. In the pictures, they were printed using 3 walls and the new lightning infill. There is a single color piece of them too. See the pictures for assembling instructions, but it's really straight forward.<h4>Tip</h4>Print the buckle and the connectors together, they are small and printing together will give time for them to cool down properly while printing. 😎

flexible

dron

apple

coche

tools

viaje

jujutsu kaisen

casco

llaves

monumentos

Ender 3

magic

yu gi oh

harry potter

kingroon

jackie chan

pol

japon

iphone

one piece

vehiculos

ET

herramientas

dragón ball

star wars

lotr

naruto

marvelDc

starwars

trofeos

a1 mini

pokemon

God Of war

disney

one piece

cocina

AMS

imprimir

p1p

navidad