Multiply Single

NitrEX4

The original pins for the Corsair aren't easily removable for the long muzzle & stock core. I added a head to those pins so you can convert the Corsair to long or short whenever you want. Print two Muzzle Pins. Only 1 Trigger Pin is necessary. I suggest 5 walls & 100% infill. This is a modification of two pieces from the paid files. Full blaster available here: https://www.etsy.com/ca/listing/1509623188/corsair-break-action-single-shot

Corsair - Removable Pins for Long & Short Config Swapping

pinionPlus

Alphonse's head from FMA! File comes in one piece so it will need to be scaled down/ broken into parts. Happy Printing!

Alphonse Elric Helmet 

 Anime 

 Holidays 

R C 3D

PRINT PROFILES: The following are the only print profiles tested and approved by me. They are listed by the name I provided in the print profile description. I cannot guarantee the quality of any print profile that hasn’t been uploaded by me.&nbsp;<ul><li>Pokeball Upper</li><li>Pokeball Lower</li><li>Pokeball Top Shell</li><li>Pokeball Bottom Shell</li><li>Pokeball Button</li><li>Pokeball v2</li><li>Pokeball Stand</li><li>Great ball</li><li>Ultra ball</li><li>Master ball</li></ul>&nbsp;SUMMARY: This is a simple pokeball that I designed to print without any additional hardware, and minimal supports. The intent was to make the pokeball as easy to print and assemble as possible, while remaining tough and functional. If you find any issues, leave me some feedback please.&nbsp;Printing/Assembly:If you decide not to use the print profiles, these are the settings I used.&nbsp;<ul><li>Global Settings:<ul><li>6 Wall Loops</li><li>Gyroid Infill</li></ul></li><li>Red and White Pokeball Shell:<ul><li>Enable Supports: Normal (Auto)<ul><li>Snug</li><li>On Build Plate Only</li></ul></li></ul></li></ul>Assembly:The assembly is done by first gluing the top shell and bottom shell to the pokeball internals. There’s a small square tab to help align the pieces. Once the glue is dry, slide a small piece of filament through the hinge while holding the two halves together. Cut the ends flush to the pokeball. I add a drop of glue to the outside pieces of the filament since the center hinge piece is the only one that needs to rotate in order to operate. Finally, glue the button onto the pokeball. There’s a post designed to help align the pieces.&nbsp;The filament piece used for the hinge will be tight, so you might have to take an allen key and hollow out the hole a bit to get it to slide into place.&nbsp;That's all there is to it. Follow my facebook page, RC3D, for giveaways and entry details as well as my latest models.&nbsp;CHANGELOG:&nbsp;UPDATE 12/3/2023:Added great ball, ultra ball, and master ball tops. I only added the top because everything else is the same, so I'll include 3 separate print profiles for these.&nbsp;UPDATE 11/26/2023:Added a guide post for the button, revised the connection to fit better, thickened the shells to prevent the banding, added alignment squares to align the shell and internals, added a stand.&nbsp;INITIAL RELEASE (10/19/2023)I created this model because the other Pokeball models I found either used external parts or didn't operate how I wanted. This one is designed to open and close using the button on the front. The button isn't 100% required to open the ball, but the intent was to make it functional so it just makes the ball pop open freely. The inside has a flat spot to aid in aligning the outer shell and make printing easier.&nbsp;

Fully Printable Pokeball Set

 Miscellaneous 

Peskere_98

Book holder with the shape of batman's logo to hold comfotly your book with a single hand. Like batman.

batman_bookholder

Super Hero 

Beerman

Tank trooper helmet by Sean Fields, not my design, I've just split it in meshmixer to fit my printer. Only the first 6 files required splitting.Original files can be downloaded from shoretrooper.co.ukHappy Star Wars day :)UPDATE:Made some progress getting most of the parts sanded. Also put together the helmet, cheeks and the neck surround.UPDATE:Got the helmet sprayed with primer and put together. I need to smooth over the joins. Fits my head perfectly although I need some foam to get my eye level correct.UPDATE:Sprayed a few coats of white gloss. Still needs a few more.UPDATE: Sprayed and black bits painted.UPDATE: Visor and the cheek greeblies fitted.Category: Costume

Sean Fields Tank Trooper (Split to fit 200x200mm build plate)

Star Wars 

standitupstore

Mera Mera fruit from one piecePrints in 2 pieces cut on the bottom for easier printing

Gun

Anime

Holidays

Miscellaneous

Super Hero

Star Wars

One piece