Mrtk1970

MrStolarsky

I am in the progress of moving into a toolbox and needed a low profile Knipex Gridfinity box. Remixed a model by @amlp and here you go - TwinGrip and Raptor 250mm side by side. No special printing settings. Like and post makes, thank you!

Gridfinity + Knipex TwinGrip and Raptor

Grid

This i a holder for <a target="_blank" href="https://makerworld.com/en/models/60890#profileId-63102" rel="nofollow noopener">https://makerworld.com/en/models/60890#profileId-63102</a>I remixed avidus's and dtphantom design , in order to be mounted on the Ikea Skådis peg board.I have made one size per plate, and one with all sizesMake sure you have a good grip on the build plate. I use Textured pei plate, with 65*I have made holder for:<ul><li>5mm</li><li>6mm</li><li>8mm</li><li>10mm</li></ul>

Skådis Skadis Magnet Dispenser Mount 5-6-8-10mm

Skadis collection

<h2>This is a Shelf / Holder for Hultafors measure tape, on the IKEA Skadis system</h2><h3>Printing tips:</h3><h3>(If you use the 3mf file in Bambu studio, the settings should be already set)</h3>I used Bambu Labs Basic PLA Metal with standard settings other than these:&nbsp;<h4>0,20mm layer height</h4><h4>Strength:</h4><ul><li>4 Wall loops</li><li>15% Gyroid Sparse infill pattern</li></ul><h4>Speed:</h4><ul><li>80 Outer wall</li></ul><h4>Support:</h4><ul><li>Enable support</li><li>Snug style</li></ul><h4> </h4>&nbsp;Make sure you have a good grip on the build plate. I use Textured pei plate, with temperature 67&nbsp;&nbsp;The design process:&nbsp;&nbsp;Designed from scratch by me in Fusion 360It uses <a target="_blank" href="https://www.printables.com/@Rod_21807" rel="nofollow noopener">@Rod_21807</a> Skadis attachment. &nbsp;&nbsp;<h3>Size:</h3><ul><li>Height: 56mm</li><li>Width: 30mm</li><li>Depth: 88,4mm</li></ul>&nbsp;I'm just a hobbyist, trying to make some things, not a professional designer(Please keep this in mind if you post a review)&nbsp;

Ikea Skadis shelf for Hultafors tape measure

MrTK1970

MaroDavide

This is a charger for 18650 battery. The module is an TP4056 USB-c, dimension are 21mmx25mm. The contacts I used are common contacts also used for AA batteries. The cable of the negative contact pass trought the base for not disturbing.<h3> </h3>If you want to support me: <a href="https://www.paypal.com/paypalme/MaroDavide" rel="nofollow">Thanks</a>

18650 Battery Charger

Electronic 

jwalker55

Vase with a swirl pattern.&nbsp;Overhangs don't allow printing this in vase mode, so I did not include a filled version.

Swirl Pattern Vase

elsa

nicola.tegon.90

Shelf extension for AMS

GiorgioMiglia

As described by title, it's a storage for Wowstick on the Ikea Skadis pegboard. The alignment guides are designed to be printed without supports.The holes are all the same but the one on the left is for the screwdriver as it is open on the bottom to allow to charge it while it's stored.You will need 2 <a href="https://www.printables.com/model/228663-t-nuts-for-ikea-skadis-pegboards" rel="nofollow">skadis tnut</a> to secure it. I've designed this for 2.5mm nut, 2mm nut should also fit. If you need it for 3mm nut, feel free to ask for a remix.If you have any question/issue/request leave a comment and I will be happy to help.

Wowstick 1F Skadis mount - T nut system

Skådis

jarvizar

EDIT: Updated version: <a target="_blank" href="https://makerworld.com/en/models/495851#profileId-410081" rel="nofollow noopener">https://makerworld.com/en/models/495851</a>&nbsp;3D Miniature of Midtown Manhattan!&nbsp;Model boundaries are 3rd Ave. to 8th Ave. and 30th St. to 56th St.&nbsp;Even larger version of Manhattan w/ the East River &amp; Hudson River: <a target="_blank" href="https://makerworld.com/en/models/111838#profileId-119762" rel="nofollow noopener">https://makerworld.com/en/models/111838</a>&nbsp;Notable included landmarks:<ul><li>Empire State Building</li><li>Times Square</li><li>Madison Square Garden</li><li>Chrysler Building</li><li>Rockefeller Center</li><li>Grand Central Station</li><li>Bryant Park + New York Public Library</li></ul>For a square version that includes more of Manhattan, check out my <a target="_blank" href="https://makerworld.com/en/models/101400#profileId-108201" rel="nofollow noopener">NYC Midtown Manhattan (Square)</a> model!&nbsp;Collection of my other miniature cities: <a target="_blank" href="https://makerworld.com/en/u/1935755220/collections/146964" rel="nofollow noopener">https://makerworld.com/en/u/1935755220/collections/146964</a>&nbsp;<h3>Printing &amp; Slicing Details</h3>&nbsp;This model was designed to be printed with a 0.4mm nozzle and 0.16mm layer heights.Try using a 0.2mm nozzle (0.08mm layer heights) or scaling up for even finer detail!&nbsp;Note: If roads or other small details disappear after slicing, try lowering the extrusion/line width of external perimeters (outer walls) closer to 0.4mm OR use Arachne walls (can also enable “Detect Thin Walls”).&nbsp;<h3>Framing Details</h3>&nbsp;This model measures almost exactly 6.7in by 4.7in (170.5mm X 119.5mm) and should fit most 5x7 frames (assuming frame lip/overlap is around a quarter inch). Feel free to change the scale/size of the model(s) to meet your needs.&nbsp;Personally I use these cheap frames from Amazon: <a target="_blank" href="https://www.amazon.com/dp/B0C8HY7YSQ" rel="nofollow noopener">https://www.amazon.com/dp/B0C8HY7YSQ</a>And blue printer paper: <a target="_blank" href="https://www.amazon.com/Astrobrights-491618-Multipurpose-8-5-Inch-11-Inch/dp/B00006IDQT" rel="nofollow noopener">https://www.amazon.com/dp/B00006IDQT</a>&nbsp;I also included a fully printable frame (including a 1mm thick water plate) designed to fit all my miniature cities.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000095824/design/2023-12-27_7536c6348b762.webp"><figcaption>Gif of the Printable Frame</figcaption></figure>&nbsp;A frame is not required! This model looks great by itself and can be displayed almost anywhere.&nbsp;See my <a target="_blank" href="http://patreon.com/jarvizar" rel="nofollow noopener">Patreon</a> for a commercial license, early downloads, polls towards future models, and more!&nbsp;

New York City Manhattan 3D Mini v2.0

maps

spud2077

this is a remix of gwenhidwy stand for blockheadz I have sliced and added pegs so i can be placed top down on the build plate allowing the pattern from your build plate to be transferred to the visible shelf.

3 Tier Display Stand

Display

TBone_427120

I had to make some cookies for an office party and decided to make these. <h3>Printing Tips</h3>Recommend printing in something tougher than standard PLA. PETG works fine.<h2>Cookie Tips</h2>A ghost eye template is included. I originally tried drizzling icing into the template, but it took too long and was too messy. Ultimately I used the eye template to cut out some white fondant, and that worked great.&nbsp;The pupils of the ghost eyes are M&Ms. If you want to be arcade accurate, they're dark blue (not black). M&M on their website will sell you bags of one or two specific colors, so I bought a bag of dark blue and white (for when the ghosts are “scared”).&nbsp;<h3>Recipe</h3>Here's my grandma's cookie recipe that I always use:&nbsp;Melt In Your Mouth Sugar Cookies 1 cup butter softened 1 1/2 cup powdered sugar 1 egg 1 tsp vanilla 2 1/2 cups flour 1 tsp baking soda 1 tsp cream of tartar Cream 1 cup of butter and 1.5 cups of powdered sugar. Add 1 egg and 1 teaspoon of vanilla. Add 2.5 cups of flour, 1 teaspoon baking soda, and 1 teaspoon of cream of tartar. Chill dough. Roll it out thin and cut. Bake for 5 minutes at 400 degrees. Tip: The bake time is dependent on how thick they are rolled out. Check after 5 minutes. Tip: An insulated cookie sheet is highly recommended.Tip: For easier rolling, divide the dough into halves or thirds and form each portion into a flattened disc. Wrap in wax paper for chilling. If you chill the dough overnight, let each packet of dough stand at room temperature for ten minutes before rolling. &nbsp;&nbsp;

Pac-Man and Ghost Cookie Cutter Set

Kitchen 

cube3dworld

In Case Of Hunger Lockable Storage Box Customize Me in Fusion 360!Video: <a target="_blank" href="https://www.tiktok.com/@cube3dworld/video/7230365145430625563?is_from_webapp=1&sender_device=pc&web_id=7132710666545563142" rel="nofollow noopener">Link</a>&nbsp;HowToPrint: - Layer Height: 0,2mm or smaller. - Support: only for Lever - Infill: 15 %&nbsp;Font: Bernard MT Condensed

Customizable In Case Of Hunger Storage Box

fusion 360

Spiral Vase

vasemod

Mimi home decoration

print any shelves you need and fix them with the clip . no supportsmy printer is out of order so cant print them , but this is a picture of what you will get .To fix on the wall :As the shelves are not designed for heavy things, I think large nail will be enough, or use transparent nano double side tape .https://amzn.to/3BWPKkuYou can also use Sossai bracket like this one :<a target="_blank" href="https://www.printables.com/fr/model/482604-shelf-or-furniture-angle" rel="nofollow noopener">https://www.printables.com/fr/model/482604-shelf-or-furniture-angle</a>&nbsp;my others design <a target="_blank" href="https://makerworld.com/en/u/2044748376" rel="nofollow noopener">https://makerworld.com/en/u/2044748376</a>&nbsp;&nbsp;

Modular octogone and hexagone shelves with clip

Wall

RobDrivesCars

It's just a tray™ … or is it?Well, it is, but it's a small tray for small parts. Specifically, I designed these for screws when I'm working on fulfilling orders that require I sort specific length screws and count the quantity, but this could be useful for anyone doing any sort of small electronic disassembly!This is StackBox v2. It has several big upgrades over v1:<ul><li>No supports needed, ever.<ul><li>The bottom of the tray has flared. This allows for the ez-stack system do its job using simple bridging</li></ul></li><li>The spout has been redesigned<ul><li>It's now on an angle, meaning screws are less likely to spill out</li><li>The </li></ul></li></ul><figure class="image image_resized" style="width:63.34%;"><img src="https://makerworld.bblmw.com/makerworld/user/171771437/draft/2023-09-19_5lqjwej5c6id.gif"></figure>The base of the tray has a divided interior which allows you to sort two or more different types of items (like two sizes of screws) on either side. I also added ridges to catch small features like the lip of the screw head so it makes for easy sorting/counting.<figure class="image image_resized" style="width:39.77%;"><img src="https://makerworld.bblmw.com/makerworld/user/171771437/draft/2023-09-19_xrseczvlcuch.jpg"></figure>I also added a small funnel at the corner of the tray. This “spout” will just fit into a 2x3-inch (50x75mm-ish) bag in case you need to store those sorted items for whatever reason. There is a small lip right before the spout to prevent loose screws from just falling out of the spout.<figure class="image image_resized" style="width:39.3%;"><img src="https://makerworld.bblmw.com/makerworld/user/171771437/draft/2023-09-19_da87h1awsd5l.jpg"></figure>On, and did I mention they can stack? Because they can. It's kind of the whole point and it makes storing multiple kinds of screws or small parts for a single project super simple.There's also a small friction-fit lid in case you want to keep those parts free from the eyes of wandering cats.This print has been simplified to just three files:<ol><li>Small Tray: 10mm high walls</li><li>Medium Tray: 25mm high walls</li><li>Lid: It's a lid, kind of! There is no securing other than friction-fit (which depends on your printer tolerances). This is more to prevent bumps and spills.</li></ol>----The original v1 of this model (which is retired and will no longer be updated) <a href="https://www.printables.com/model/493058/" rel="nofollow">can be found here</a>.

Stackbox - The Stackable Small Parts Sorting Tray (v2)

box & tray

Daryl Bateman

A stand for graded pokemon cards great little stand to display your dominence &nbsp;0.2 layer height or better for more detail10% infill (gyroid)

Graded Pokemon Trading Card Holder/Display

Jeanette 

Moomin

no support needed, recomendet to do print by object or 2 plates

Filament Keychian

Keychain 

BT3D printing

Nemo multicolor keychain 3mf file for Bambulab printers with AMS. Already colored in Bambu studio, facing down to the buildplate.For commercial license please join my patreon:<a target="_blank" href="https://www.patreon.com/BT3DDeusCat" rel="nofollow noopener">patreon.com/BT3DDeusCat</a>

Nemo multicolor keychain

Sign

Thibo-do-it

Use a filament change to make text pop. &nbsp;I used supports only on build plate

CUSTOMIZABLE Ryobi 18V tool holder

ryobi AEG Dremel 

kerngebiet

Universal holder for any cordless drills and tools. I used it mainly for Makita, but other power tools should fit as well of course.The following Makita tools have been tested so far in the 40mm version:<ul><li><a target="_blank" href="https://amzn.to/43EvbGk" rel="nofollow noopener">Makita DTD171</a></li><li><a target="_blank" href="https://amzn.to/418LxoO" rel="nofollow noopener">Makita DDF484</a></li><li><a target="_blank" href="https://amzn.to/3KH0RSL" rel="nofollow noopener">Makita DDF484B</a></li><li><a target="_blank" href="https://amzn.to/3KKXTMS" rel="nofollow noopener">Makita DHP484</a></li><li><a target="_blank" href="https://amzn.to/3L1Jk99" rel="nofollow noopener">Makita DDF459</a></li><li><a target="_blank" href="https://amzn.to/41iBQUT" rel="nofollow noopener">Makita DHP481</a></li><li><a target="_blank" href="https://amzn.to/3GNdGK7" rel="nofollow noopener">Makita DTW300</a></li><li><a target="_blank" href="https://amzn.to/3UJI2D4" rel="nofollow noopener">Makita DTW302</a></li><li><a target="_blank" href="https://amzn.to/3ojGUKh" rel="nofollow noopener">Makita DHG180</a></li><li><a target="_blank" href="https://amzn.to/3obRMJP" rel="nofollow noopener">Makita DHG181</a></li><li><a target="_blank" href="https://amzn.to/46xfsJ9" rel="nofollow noopener">Festool T18+3</a></li><li><a target="_blank" href="https://amzn.to/40VRPc2" rel="nofollow noopener">Milwaukee 2553 M12 Fuel</a> **</li><li><a target="_blank" href="https://amzn.to/3TgM9rB" rel="nofollow noopener">Milwaukee 2504 M12 Fuel</a> **</li><li><a target="_blank" href="https://amzn.to/3RqUbNf" rel="nofollow noopener">DeWalt DCE530</a> **</li><li><a target="_blank" href="https://amzn.to/40XWAlF" rel="nofollow noopener">DeWalt DCD771</a> ** (seems also to fit in 35mm)</li><li><a target="_blank" href="https://amzn.to/3Gijfj2" rel="nofollow noopener">DeWalt DCF887</a> ** (seems also to fit in 35mm)</li><li>DeWalt DCF885 ** (seems also to fit in 35mm)</li><li>DeWalt DCD985 **</li><li><a target="_blank" href="https://amzn.to/40W9IHO" rel="nofollow noopener">Surebonder Ultra DT-3100FAMZS</a> **</li><li>Porter Cable PCC601</li><li>Porter Cable PCC641</li></ul>The 35mm version fits good for:<ul><li><a target="_blank" href="https://amzn.to/3L8u4HD" rel="nofollow noopener">Makita DDF487</a></li><li><a target="_blank" href="https://amzn.to/41BBmsN" rel="nofollow noopener">Makita DHP487</a></li><li><a target="_blank" href="https://amzn.to/3sUPVMj" rel="nofollow noopener">DeWalt DCD778</a> **</li></ul>The wide version fits:<ul><li><a target="_blank" href="https://amzn.to/46goMlB" rel="nofollow noopener">Makita DWT700</a> **</li><li><a target="_blank" href="https://amzn.to/46eql3g" rel="nofollow noopener">Makita DWT701</a> **</li><li>Ryobi PBLIW01 **</li></ul>Smaller tools will probably better fit in the smaller holder with a 35mm cut-out. If someone needs a different measurement, feel free to leave a comment, I'll see if I can implement this.<h3>Printing</h3>Very easy, no supports needed if printed standing. I used PETG for my prints and three walls with 20% infill. This is very solid. If you want, you can print it with 100% infill and get it even stiffer. But you will need ~220g of filament for this. ;)<h3>Update 04.05.2023</h3>I've added another design for the holder, based on the idea of <a target="_blank" href="https://www.printables.com/@mnemic" rel="nofollow noopener">@mnemic</a>. I has the same sizes as the other, but saves even more filament.<h3>Update 06.10.2023</h3>I've added a wider version of the holder, for Tools like the <a target="_blank" href="https://amzn.to/46goMlB" rel="nofollow noopener">DWT700</a> or <a target="_blank" href="https://amzn.to/46eql3g" rel="nofollow noopener">DWT701</a>. This version is identical to the 40mm default version. Only difference is, that that the inner width is 81mm instead of 70mm.&nbsp;* = Amazon Affiliate Links ** = Information from users who printed the model

Universal cordless Drill Holder/Mount (Makita, DeWalt, Bosch, Festool, ...)

Tools org

FunkyArt

<div><h1>Summary</h1><div>I was annoyed to open the integrated trashcan manually in my Ikea kitchen. This tiny 3Dprint put an end to this. You can simply print the "standard version" twice and fasten it with a small rope, just be careful to choose the right length of the rope. You can fix it with screws or glue. However, the Standard only version has the disadvantage that the lid has to be removed when emptying the trashcan. So there are two other parts for this. Here you need two small cylinder magnets 4x5mm. Its easy to remove and also easy to fix again. You can combine both (this is what i did). </div><h1>Print Settings</h1>Rafts: <div>No</div> <pre><code> Supports: <div>No</div></code></pre> Resolution: <div>0,1</div> <pre><code> Infill: <div>25%></div></code></pre><h1>Custom Section</h1><iframe src="//player.vimeo.com/video/411835589" frameborder="0" allowfullscreen="allowfullscreen"></iframe></div>

Simple IKEA Trash can opener (removable)

ikea

mathieu

Impression sans supports, le porte gant optionnel est à coller sur le support principal.La “boule” est dispo avec logo BMW&nbsp;

Motorbike Helmet & gloves holder

Car Motorcycle

Bambu Lab

A1 mini test model - Screw Gauge by Bambu Lab

Screw Gauge by Bambu Lab

Tools 

ralf.hoerhager

<a target="_blank" href="https://www.printables.com/de/model/418290-sanding-wedge-v2" rel="nofollow noopener">Printables Link</a>&nbsp;General informationAs you might have guessed from the title, this is the 2nd version of my sanding wedge. I made the models in Autodesk Inventor. &nbsp;The new design is Fully 3d printed, no bolts or nuts needed.&nbsp;Technical detailsThis sanding wedge is made for 50mm wide sandpaper. The sandpaper must be at least 310mm long for the original version and 225mm for the small version.I recommend you buy a roll of Sandpaper that already has the desired width and then cut it to length.&nbsp;Here are some I found on Amazon: <ul><li><a target="_blank" href="https://amzn.eu/d/5q3raSU" rel="nofollow noopener">Bosch DIY Sanding Roll for Metal 50mm 5m 120 Grit </a></li><li><a target="_blank" href="https://amzn.eu/d/gXm8hH8" rel="nofollow noopener">Klingspor 4224 - KL 361 JF Sanding Rolls with Fabric Backing, Brown, 50 x 25000, Packaging Unit 1 - Grain 180</a> </li></ul>&nbsp;Update 11.10.2023 : I added a brim and spread it over more plates to reduce printing errors. Also made the hole in the "wedge" bigger because it was too tight.

Sanding Wedge V2

Sanding 

Impression_ant

A little storage gadget for your USB and SD cards !It prints without any supports and can be printed on a mono colour printer.You can store up to 2 USBs or 2 SD cards. I will soon release a version with 1 USB and 1 SD card.It can also be used for storing other little bits laying on your desk ;)It takes about 2 hours to printThe slots for SD and USB cards are chamfered, meaning that even if your USB is a little deformed, it will fit.To use it, print the file "Bas glace" and either "haut glace USB" or "haut glace SD", depending on which one you wish to use.&nbsp;Disclaimer: The purchase of these pieces does not include commercial use, please mention me in any sharing of this model (either by my username "@impression_ant" on Instagram, or by my name "Ehret Colin"). Don't hesitate to contact me if you'd like to make commercial use of it ;)

Ice cream USB storage

Fun & decor 

Smart3d by Gabriel Gomes

🏁 Special for Gran Turismo Fans! 🏁Illuminate Your Space with the Speed and Style of Gran Turismo!Introducing the Gran Turismo Themed Light, an exclusive masterpiece tailored for the true enthusiasts of the iconic racing game. Precision-crafted through 3D printing, this light isn't just a decorative accessory—it's a vibrant tribute to the high-octane world and precision of Gran Turismo.🌟 Key Features:<ul><li>Sleek Design: Inspired by the elegant contours and emblematic logos of Gran Turismo, every detail has been captured to bring the essence of the racetrack directly to your space.</li><li>Competitive Glow: Integrated LEDs emit a sharp glow, setting the perfect ambiance for nighttime gaming sessions or reliving the thrills of the races.</li><li>Premium Finish: Printed with high-quality materials, ensuring durability and a look that any Gran Turismo racer would be proud of.</li></ul>&nbsp;Don't miss out on accelerating your love for the Gran Turismo universe. Secure your Gran Turismo Themed Light today and drive your space with style and speed! 🏁🌟🚗&nbsp;<h3>Video explaining name customization 🔗</h3><h3> </h3><h3>Video explaining Inglês here 👉 <a target="_blank" href="https://www.youtube.com/watch?v=UQFVBIzJuTE&t=65s" rel="nofollow noopener">Video</a> or <a target="_blank" href="https://www.patreon.com/posts/tutorial-79998205?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=postshare_creator&utm_content=join_link" rel="nofollow noopener">Video </a></h3><h3>Video explaining Português here 👉 <a target="_blank" href="https://www.youtube.com/watch?v=hmGqF4oN_b4&t=590s" rel="nofollow noopener">Video</a> ou <a target="_blank" href="https://www.patreon.com/posts/tutorial-79998205?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=postshare_creator&utm_content=join_link" rel="nofollow noopener">Video</a></h3><h3>Tinkercad Custom Fonts Português here 👉 <a target="_blank" href="https://www.youtube.com/watch?v=hmGqF4oN_b4&t=590s" rel="nofollow noopener">Video</a></h3><h3>Tinkercad Custom Fonts Inglês here 👉 Soon</h3><h3> </h3><h3>Video of material used 👉 <a target="_blank" href="https://www.youtube.com/watch?v=yRWmLu6s4ek" rel="nofollow noopener">Video</a> or <a target="_blank" href="https://www.youtube.com/watch?v=nkAmhxxbynU&t=282s" rel="nofollow noopener">Video</a></h3><h3> </h3><h3>Video explaining process 1 extruder 🔗</h3><h3> </h3><h3>Video explaining Inglês here 👉 <a target="_blank" href="https://www.youtube.com/watch?v=Zmqgbs5jFBU&t=329s" rel="nofollow noopener">Video 1</a> <a target="_blank" href="https://www.youtube.com/watch?v=7HGH8_x5Mec&t=2s" rel="nofollow noopener">Video 2</a></h3><h3>Video explaining Português here 👉 <a target="_blank" href="https://www.youtube.com/watch?v=qafZe33vO-Y&t=224s" rel="nofollow noopener">Video sem abl </a> ou <a target="_blank" href="https://www.youtube.com/watch?v=MXdp3aAKiBY&t=309s" rel="nofollow noopener">Video com abl</a></h3><h3> </h3><h3>Videos For Bambu Users 🔗</h3><h3> </h3><h3>How do i fix my gaps 👉 <a target="_blank" href="https://www.youtube.com/watch?v=RmknAHTkZ7k&t=111s" rel="nofollow noopener">Video</a></h3><h3>Bambu studio use STEP File 👉 <a target="_blank" href="https://www.patreon.com/posts/bambu-studio-85192101?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=postshare_creator&utm_content=join_link" rel="nofollow noopener">Video</a></h3><h3> </h3><h3>Component Links For this Lamp 🔗</h3><h3>LEDs rgb 5v 🛒👉 <a target="_blank" href="https://s.click.aliexpress.com/e/_98Vnlw" rel="nofollow noopener">Link</a></h3><h3>LEDs white 5v 🛒👉 <a target="_blank" href="https://s.click.aliexpress.com/e/_9z6kJn" rel="nofollow noopener">Link</a></h3><h3>Controllers 5v🛒👉 <a target="_blank" href="https://s.click.aliexpress.com/e/_DkAmFej" rel="nofollow noopener">Link</a></h3><h3> </h3><h3>Other links to parts I use 🔗</h3><h3> </h3><h3>Usb power boost linha dc 5v to dc 12v 🛒👉 <a target="_blank" href="https://s.click.aliexpress.com/e/_DCiKxWb" rel="nofollow noopener">Link</a></h3><h3>LEDs white 12v High Brightness 🛒👉 <a target="_blank" href="https://pt.aliexpress.com/item/33039307898.html?spm=a2g0o.order_list.order_list_main.173.46e6caa4NvGPx3&gatewayAdapt=glo2bra" rel="nofollow noopener">Link</a></h3><h3>DC Power Supply Jack 🛒👉 <a target="_blank" href="https://s.click.aliexpress.com/e/_DlYW7iL" rel="nofollow noopener">Link</a></h3><h3>Usb Cable 1M 🛒👉 <a target="_blank" href="https://s.click.aliexpress.com/e/_DDw0YOf" rel="nofollow noopener">Link</a></h3><h3>Usb Cable extension 🛒👉 <a target="_blank" href="https://s.click.aliexpress.com/e/_DBjzR0n" rel="nofollow noopener">Link</a></h3><h3>Button ON/OFF 🛒👉 <a target="_blank" href="https://s.click.aliexpress.com/e/_DELIRQ3" rel="nofollow noopener">Link</a></h3><h3>Charger Module usb-c for 18650 battery 🛒👉 <a target="_blank" href="https://s.click.aliexpress.com/e/_DkP0cAn" rel="nofollow noopener">Link</a></h3><h3>18650 Battery 🛒👉 <a target="_blank" href="https://s.click.aliexpress.com/e/_DenikD5" rel="nofollow noopener">Link</a></h3><h3>Pei plate 300x300 superior effect 🛒👉 <a target="_blank" href="https://s.click.aliexpress.com/e/_A0j005" rel="nofollow noopener">Link</a></h3><h3>Pei plate Bambu Machine superior effect 🛒👉 <a target="_blank" href="https://s.click.aliexpress.com/e/_DdHORix" rel="nofollow noopener">Link</a></h3><h3>Kit Hotend para Bambu Lab clone, i use 🛒👉 <a target="_blank" href="https://s.click.aliexpress.com/e/_DcGXaNz" rel="nofollow noopener">Link</a></h3><h3>Spot Welder for 18650 Battery 🛒👉 <a target="_blank" href="https://pt.aliexpress.com/item/1005004573427677.html?spm=a2g0o.order_list.order_list_main.429.46e6caa4NvGPx3&gatewayAdapt=glo2bra" rel="nofollow noopener">Link</a></h3><h3>Copper Wire Toothbrush 🛒👉 <a target="_blank" href="https://s.click.aliexpress.com/e/_DBbI9w3" rel="nofollow noopener">Link</a></h3><h3> </h3>

Gran turismo Led Lamp 

LED Signs & lamps 

CrazyCoolPrints3D

This is an X1C Desktop Organizer. It was made to organize anything you want. A structured insert is coming soon. This doesn’t need an AMS! It can be printed with layer changes for multi-color. A P1S / P1P version is on the way! This model can also be sized up. Patreon (For Commercial Licenses To Sell And More Models): <a target="_blank" href="https://www.patreon.com/user?u=80724611" rel="nofollow noopener">https://www.patreon.com/user?u=80724611</a> &nbsp;Step By Step Process:<ol><li>Print the parts (made to work with or without the AMS).</li><li>Slide the parts in the order shown in the assembly file (glue shouldn’t be needed).</li><li>Slide the insert in, multiple versions will be available but currently there is only an empty one.</li></ol>&nbsp;Different Versions:P1S Version: <a target="_blank" href="https://makerworld.com/en/models/14742#profileId-14556" rel="nofollow noopener">https://makerworld.com/en/models/14742#profileId-14556</a>P1P Version: <a target="_blank" href="https://makerworld.com/en/models/26072#profileId-22450" rel="nofollow noopener">https://makerworld.com/en/models/26072#profileId-22450</a>&nbsp;Update Log:(9/12/23): Released&nbsp;(Please report any issues to my discord: coaster fan#4551)

Bambu Lab X1C Desktop Organizer

Desktop

K2_Kevin

<h2>The K2 Clip - WATCH THE VIDEOS BELOW!</h2>The K2 Clip is a unique design with multiple locking points. No matter what, there will be a locking point facing up. The clip can be left to &#34;float&#34; on your filament spool while printing. Extra secure storage using the locking center version! NOTE: I recommend taking them off when using the Bambu AMS. &nbsp;⭐️Don&#39;t forget to Follow! Thank you so much for your Downloads, Like and BOOSTS!&nbsp;NOTE: All printers are different, and calibrated differently. The K2 Clip has very tight tolerances. Test print one in case you need to scale the X/Y up or down.______________________________________________________________________________________________&nbsp;❤ How-To by FilamentStories ❤  <a target="_blank" href="https://www.youtube.com/watch?v=xv6aaTB9OwY&amp;ab_channel=FilamentStories" rel="nofollow noopener">https://www.youtube.com/watch?v=xv6aaTB9OwY&amp;ab_channel=FilamentStories</a><figure class="media"><oembed url="https://www.youtube.com/watch?v=xv6aaTB9OwY&amp;ab_channel=FilamentStories"></oembed></figure>&nbsp;&nbsp;<h3>JJ Shankles Video: <a target="_blank" href="https://youtube.com/shorts/xuDetHdQee8" rel="nofollow noopener">https://youtube.com/shorts/xuDetHdQee8</a></h3><figure class="media"><oembed url="https://www.youtube.com/shorts/xuDetHdQee8"></oembed></figure>&nbsp;&nbsp;❤ Featured on <a target="_blank" href="https://www.youtube.com/watch?v=koAZ6oNUyHo" rel="nofollow noopener">BV3D: Bryan Vines</a> “3D Printed Tools for 3D Printing” @ 06:15s<figure class="media"><oembed url="https://www.youtube.com/watch?v=koAZ6oNUyHo&amp;ab_channel=BV3D%3ABryanVines"></oembed></figure>&nbsp;&nbsp;<h3>Don&#39;t forget to ❤ Like and ★ Rate!</h3><h3>Q&amp;A:</h3><ul><li>How do I use the K2 Clip?<ul><li>Insert the end of your filament through the center hole and feed the clip around your spool until the end of your filament again meets up with your K2 Clip.</li><li>Press the end of your filament into the top of the K2 Clip.</li></ul></li><li>Why so tight?!?! It&#39;s designed to be tight and hold your filament firmly. The K2 Clip will loosen after some use.</li><li>Why is it a triangle? Triangles are cool! No matter what, there will be a locking point facing up.</li><li>Should I remove the clip while printing? In your AMS, I would, otherwise Heck NO! I took lots of time designing/sizing/shaping/massaging that center hole to float on your spool while printing.</li></ul>&nbsp;&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014538/design/2023-11-21_a81da16fabaa3.png"></figure>

K2 Filament Clip - K2 Clip

3D printer accessories 

<h2>iPad / Tablet / Phone Stand - 2 Versions! </h2><ul><li>Wide version - 115mm</li><li>Narrow version - 70mm</li></ul>&nbsp;&nbsp;

iPad / Tablet / Phone Stand 2 Versions! 

PC / Apple 

Willi 3D

Create your BaBo organizer! A system created to store them all!&nbsp;Description:This is the BaBo drawer module 30. The drawer module is the heart of the system as it carries the inserts and is therefore the main page of the system.&nbsp;The usable dimensions of the drawer are 240x210x30. The drawer has space for 8x7 inserts. The inserts have a grid of 30x30mm, this means a 1x2 insert has the dimensions 30x60mm.&nbsp;BaBo organizer is a stationary, very flexible system to store your tools, spare parts and even printing plates. The design is based on the iconic look of the Bambu Lab X1 printer.&nbsp;It was important to me that even newbies could print and use the system, which is why all parts are printed without support and the parts are already pre-sliced.&nbsp;Furthermore, all inserts for the accessories and tools that the printer comes with are free. Only the special modules and inserts are only accessible to members of my club. The purpose of the club is to promote my work and to reduce the costs that I incur. I would also like to find people who are interested in expanding this system.&nbsp;The entire system uses only 1 type of screw, M3x8 countersunk screws.Links:<ul><li><a target="_blank" href="https://makerworld.com/de/u/24485025/collections/12914" rel="nofollow noopener">BaBo collection</a></li><li><a target="_blank" href="https://makerworld.com/en/u/24485025/collections/666853" rel="nofollow noopener">BaBo duo collection</a></li><li><a target="_blank" href="https://makerworld.com/en/u/24485025/collections/666866" rel="nofollow noopener">BaBo inserts</a></li><li><a target="_blank" href="https://www.printables.com/@Willi/store" rel="nofollow noopener">Exclusive models, printables. (Credit card)</a></li><li><a target="_blank" href="https://than.gs/u/1578655?plans=true" rel="nofollow noopener">Exclusive models, thangs. (Paypal, Credit card)</a></li></ul>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014125/design/2023-09-20_95fdae0c8d181.jpg"></figure>Update:(13/09/23)<ul><li>Assembly optimizations</li></ul>(31/10/23)<ul><li>improved connection between modules</li><li>easier to push back the drawer</li><li>print profile optimizations</li></ul>(26/01/24)<ul><li>design optimizations to prevent warping</li></ul>&nbsp;Printing:Layer height: 0.2Supports: NoBrim: NoMaterial: all&nbsp;Assembly:Follow the instructions in the picture.<ul><li>printed parts</li><li>16 x M3x8 countersunk screws.</li></ul>If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. <a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=WGL5LXN5EHEXN" rel="nofollow noopener">If you want to support my work buy me a coffee (PayPal).</a> Thanks!&nbsp;Clubcontent:<figure class="image"><a href="https://www.printables.com/@Willi/store" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014125/design/2024-06-13_ccadb89c071b7.jpg"></a></figure><figure class="image"><a href="https://www.printables.com/@Willi/store" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014125/design/2024-06-13_c05e6d1cbb9c7.jpg"></a></figure>

[BaBo] organizer drawer module 30

Bambu lab p1s mods

BODY3D

Juste a cute Ghost !Print it without supports =)&nbsp;Video : <a href="https://www.tiktok.com/@body3d_/video/7151361561372691717" rel="nofollow">https://www.tiktok.com/@body3d_/video/7151361561372691717</a>