MrDolos

Gunner Lee

A bolt action pen that uses the standard Pilot G2 insert. The 0.2mm nozzle allows for precise tolerances that allow the bolt and threads to work seamlessly. The pen can be printed all in one plate or separate to print colors to mix and match each part. The Pilot G2 can be purchased at any office supply store and is widely available, making this a highly accessible EDC pen.

Bolt Action Pen

The Philosopher

Picture this: you&#39;re home by yourself, sitting on your porcelain throne, and you are ready to depart from your bathroom when you instinctively reach to the side. You reach for it again, but to your dismay, nothing is there, and you slowly look over. Could it be? Could you really have ran out of toilet paper? Now what??? Teepee ensures that this will never happen again. with a modular stacking system, the only limit to how many rolls you can store is your ceiling height. You can use teepee in two configurations, with a receptacle at the bottom that will hold the roll, or with a dispenser and rods for each roll that allows you to use it as a regular toilet paper holder which can “eject” the roll automatically when it is empty, allowing the next full one to automatically roll into the dispenser.&nbsp;This system should work with 99% of toilet paper rolls, however I have included the f3d file just in case, so the size can be increased. You could also just scale the model up, which should work just as well.&nbsp;&nbsp;Printing &amp; Assembly:&nbsp;Printing requires a very small amount of supports for the bottom of each straight piece, as well as supports for the curved portion if you choose to not split it.&nbsp;As for assembly, any strong glue should suffice, or as an alternative you could spot weld the pieces together. To attach the entire thing to your wall, I would recommend either tape or some sort of adhesive, to prevent making a hole in your wall.&nbsp;I have also included a test print, as this entire project is filament intensive, it is a good idea to make sure that each piece will fit together properly before printing the whole thing.  Notes:&nbsp;The dispenser with the ejection system is still quite hairy, and depends on the toilet paper roll. I am working on a more consistent version, but for now I would suggest printing both the receptacle and the dispenser to see which one works better for you. As always, feel free to modify the model as you need, I can provide any other files.&nbsp;To use the ejection system, you must print a rod for each roll you wish to use at any given time, and slide them into the holder. This ensures that each new roll is able to spin freely in the dispenser.&nbsp;Want More? Check out my modular dispensers! https://makerworld.com/en/models/412523

Teepee: Modular Bathroom Crisis Prevention System

house

Martin

This modular hydroponics tower lets you grow a large amount of plants without the need of lots of room. Each module fits 3x 50mm (2 inch) pots and has the water tube running up the middle. Just stack as many modules as you require.&nbsp;Each module is designed to fit 3 M3x4x5 heat-inserts and bolt together using M3 x 6mm bolts.&nbsp;I designed this to fit on a small 3D printer, with a build area required of 170 x 170.&nbsp;At the bottom of the stack you need the Base with a 16mm barb fitting and the optional base clamp (to clamp to the other side of a container lid) and attach it to a submersible pump.&nbsp;At the top you push in the shower head and bolt on the lid. I drilled out the holes of the top module to 4.5mm to fit in 3 heat-inserts to make this secure but it does function fine without the lid bolted down.&nbsp;Have fun growing!

Modular Hydroponics Tower

planters

lola

FunkyArt

A few years ago I made this as a rendering for my kitchen backsplash. At some point I thought, why not print it out and put it on a shelf?It's a tribute to the legendary photo from the New York Times "Lunch atop a skyscraper" and of course Star Wars. Now what has always belonged together comes together ...&nbsp;If you don't want to waste so much material or have problems while printing, try cutting the model exactly in the middle of the support surface, like here (or use the halfcut profile):<figure class="image image_resized" style="width:100%;"><img src="https://media.printables.com/media/prints/474202/rich_content/745475e4-d756-4984-b39e-6e8470fef94b/thumbs/cover/800x477/png/unbenannt.webp"></figure><figure class="image image_resized image-style-align-center" style="width:99.69%;"><img src="https://media.printables.com/media/prints/474202/rich_content/ba54fb57-f598-4b31-9bf8-5d75aba81fbe/thumbs/cover/800x600/jpeg/image3.webp"></figure>This makes it an pretty easy print (use tree support!) I glued the legs and the surface with plastic glue, it holds perfect and the result looks quite good.<figure class="image image_resized image-style-align-center" style="width:99.15%;"><img src="https://media.printables.com/media/prints/474202/rich_content/60e8a19b-5c21-493e-8e4c-e9037d5b321b/thumbs/cover/800x600/jpeg/image0.webp"></figure><figure class="image image-style-align-center image_resized" style="width:98.8%;"><img src="https://media.printables.com/media/prints/474202/rich_content/5468c86b-fb99-4dea-9c33-e2af387fe6d8/thumbs/cover/800x600/jpeg/image0.webp"></figure>&nbsp;

Lunch atop a shelf (StarWars Troopers)

Meister Edel

<h2> Check Out the new V2 :) <a target="_blank" href="https://makerworld.com/de/models/105998#profileId-113399" rel="nofollow noopener">https://makerworld.com/de/models/105998#profileId-113399</a> Summary</h2>Board 1: WIth Chamfer / Mit Fase Board 2: With radius / Mit Radius&nbsp;&nbsp;No glue is required due to the small tolerances and the intentional pressfit.&nbsp;Tip: assemble the wheels in a vice if the pressfit is too tight!Have fun printing, assembling and playing: D!&nbsp;<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=Qr4Y9QN1GNo&t=1s"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/Qr4Y9QN1GNo?start=1" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Notes: Use supports with the board! Axis, Axis inserts & Wheels dont need Supports.Round Axis part with 0% Infill and 1 Perimeter to avoid seamsPrint 0,1 - 0,2 mm layer hight.

Robust Fingerskateboard

kids

My First Remix! Long print but looks incredible!

Red Skull Death Trooper - Star Wars

my Remixes

SnapPrint3D_SuperCrazyPrints

Sign up Membership to get 15+ models every month. All models 3D Print Without Supports and (3MF,STL) file ready! <a target="_blank" href="https://www.supercrazyprints.com/" rel="nofollow noopener">https://www.supercrazyprints.com/</a>&nbsp;Check out my other models: <a target="_blank" href="https://cults3d.com/en/users/Scrazyone_SnapPrint3D/3d-models" rel="nofollow noopener">https://cults3d.com/en/users/Scrazyone_SnapPrint3D/3d-models</a>

Pokemon-Pikachu(NO SUPPORT)

Pokémon

braga3dprint

Dive into the vibrant world of gaming with our 3D model lightbox showcasing the iconic Xbox logo! 🎮✨ This unique piece comprises three separate components: the distinct Xbox logo, sleek accompanying text, and a sleek box, all of which you can customize and color freely using Bambu Studio. 🌈 Personalize your gaming sanctuary to match your style, mood, or even your latest gaming conquest. Illuminate your space with the hues of your gaming spirit and showcase your Xbox pride with this customizable lightbox. Get ready to level up your gaming den! If you don't have or don't want to install LED's you can just glue the parts together and have an awesome sign! WARNING!- remove purge line at the beginning of the print!&nbsp;Materials and tools: - glue gun - aluminum tape - led strip (here is the one I <a target="_blank" href="https://pt.aliexpress.com/item/1005004253095880.html?spm=a2g0o.order_list.order_list_main.16.1df1caa45b098E&gatewayAdapt=glo2bra" rel="nofollow noopener">use</a>): simple 1m white led USB- soldering iron (optional)&nbsp;RECOMMENDATIONS- use a textured PEI sheet - use the print profile, it has quite a few setting changes that help achieve the best results - make a hole for the USB strip wherever you like it best with a soldering iron, drill or in the slicer- use the aluminum tape on the inside of the backplate to help with light diffusion - glue the LED's the further away from the colored design possible; placing them too close ruins the diffusion and the individual LED's become visible Bambu Studio Settings: I always recommend using the print profile I provided since it has settings with which I've been able to get the best results. If you choose not to here are the main slicer settings I recommend: - preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04 - Quality → Wall generator → Arachne - Quality → Wall transitioning threshold angle → 50º - Strength → Advanced → Infill/wall overlap → 20% - Quality → Advanced → Avoid crossing walls - Increasing retraction / reducing temperature can help reducing wisps - Order color printing from lightest to darkest color How to make a hole in Bambu Studio:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=OsA23WCxRtg"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/OsA23WCxRtg" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure> Assembly video: <figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=QNsShLmXYh0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/QNsShLmXYh0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

XBOX logo Lightbox LED Lamp

Light Boxes

Blacho

Joint Rolling Hand Stage

chameko小廢物電波塔

<blockquote>12/06 After many tests, I successfully found out the cause of the assembly problems reported by some users, and modified the side panel file "AMS Dry Box-SW_v2".NOTE!I Designed this model not only for ams, I also used it in the vacuum bag that holds the filament, so I needed tight tolerances to make the box strong enough. The tolerance is 0.3mm, please be sure to confirm before printing this model.</blockquote>Open the side lid and pour about 60g of silica.<img src="https://makerworld.bblmw.com/makerworld/draft/306465/2023-12-25_92a6870d48198.jpeg">&nbsp;There is a buckle design on the top, please make sure it is buckled correctly when installing.<img src="https://makerworld.bblmw.com/makerworld/draft/306465/2023-12-25_2f71bc9cf33e9.png">&nbsp;&nbsp;The front and back of the V2 version have relaxed tolerances in most areas, making it easier to install. I kept the last small area because without this part, you might get the box and slide it open like in the second picture, resulting in a mess.Please be careful not to install it in the wrong direction when installing.<img src="https://makerworld.bblmw.com/makerworld/draft/306465/2023-12-25_fcf2db2bab532.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/306465/2023-12-25_210d78c4699ec.jpeg">&nbsp;If you have trouble assembling them, try using a heavy object to knock them into the correct position.<img src="https://makerworld.bblmw.com/makerworld/draft/306465/2023-12-25_e0f13f6121362.jpeg">&nbsp;As for why I used this complex design, it was because I considered that he had to withstand several kilograms of impact from the filament, so I wanted to distribute the force as equally as possible to each part.<img src="https://makerworld.bblmw.com/makerworld/draft/306465/2023-12-25_90a605e9c843e.png"> <blockquote>Also I have a beautiful model related to AMS! Don’t miss it!</blockquote><figure class="image image_resized image-style-side" style="width:56.75%;"><a href="https://makerworld.com/zh/models/99476#profileId-106044" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/306465/2023-12-23_3d850a0169288.jpg"></a></figure>Do you always find the AMS feeder difficult to press? Are the models on the Internet very difficult to install? I have improved and carefully designed this model. Please be sure to try it!(click on the image to go to the page!)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<blockquote>----------中文解說----------</blockquote>打開側蓋後約可倒入60g的乾燥劑. 上方具有卡扣設計,安裝時請確認有正確的扣上.&nbsp;V2版本的正面與背面放開了大部分區域的公差,使其較容易安裝. 我保留了最後一小區域,因為沒有這個部分的話,你可能再拿取盒子時像第二張圖一樣滑開,導致一團糟. 安裝時請注意不要裝錯方向.&nbsp;如果你在組裝上遇到了困難,可以嘗試使用重物敲擊他們使其安裝至正確的位置. 至於為什麼使用這種複雜的設計,是因為我考慮到他必須承受數公斤來自線材的撞擊,因此我想盡可能地讓力量平均分攤到每個部分.

0.2