MrClean

ItsVRK

Note: There is now a V2 of this model <a target="_blank" href="https://makerworld.com/en/models/458322" rel="nofollow noopener">https://makerworld.com/en/models/458322</a> I got so tired of poop jumping out while the nozzle was being cleaned so I created this Poop retainer and added a section. of A1 Nozzle wiper to the tail end of the process.. no more wisps!<figure class="media"><div data-oembed-url="https://youtu.be/et-Bg7UNox0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/et-Bg7UNox0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>This screws into place using the existing screws either side of the purge chute. Cut a 3x3 square of A1 Filament wiper (I suggest cutting the rounded end row off first so you have a nicely square part, you&#39;ll get 12 pieces from the linked part) <a target="_blank" href="https://store.bambulab.com/collections/spare-parts-for-a1-series/products/heatbed-nozzle-wiper-a1" rel="nofollow noopener">https://store.bambulab.com/collections/spare-parts-for-a1-series/products/heatbed-nozzle-wiper-a1</a> &nbsp;I printed the main part with PETG using PLA as support for a super clean interface, see the third image for how to remove the support from the place where the A1 Filament wiper. Check out my other X1C/P1S mods:<ul><li><a target="_blank" href="https://makerworld.com/en/models/427348" rel="nofollow noopener">Clip in place AMS Buffer Power Release</a></li><li><a target="_blank" href="https://makerworld.com/en/models/426096" rel="nofollow noopener">Clip in place AMS Buffer PTFE Release</a></li><li><a target="_blank" href="https://makerworld.com/en/models/444558" rel="nofollow noopener">Clip in place AMS HUB PTFE Quick Release</a></li></ul>

X1C Poop Retainer and A1 Nozzle Wiper

X1/P1 COMPONENTS

PaulBPunkt

A little helper that makes it easier to find the PTFE tube when you want to print without the AMS. Simply click on it and the Butler will hold your PTFE tube when you don't need it.

A1 & A1 Mini PTFE-Butler

A1-COMPONENTS

YelTrik Designs - Click FOLLOW

Very simple model to use the Bambu 4-in-1 PTFE Adapter - X1 Series and P1 Series as a AMS hub. No supports are required and uses one screw (It uses an M3 x 8 Screw - the same size screw as those used for the spool holder).<ul><li>Provides a 4-way filament AMS hub</li><li>Proper PTFE alignment reduces likelihood of pull-back and feed errors</li><li>Adapter can be installed and removed without tools</li><li>Requires the <a target="_blank" href="https://us.store.bambulab.com/products/bambu-4-in-1-ptfe-adapter" rel="nofollow noopener">Bambu 4-in-1 PTFE Adapter - X1 Series and P1 Series</a></li></ul>

4-in-1 AMS Buffer Adapter Bracket

AMS COMPONENTS

Techro3D

Car headrest hook.&nbsp;for a shaft of Ø12mm (The hole is Ø12.3mm)&nbsp;center distance from the hole to the hook<ul><li>Option 1: 75mm</li><li>Option 2: 90mm</li><li>Option 3: 105mm</li></ul>

Car headrest hook | simple, handy and strong.

AUTO

Adam L

Note to printables staff : this is NOT a remix of a different model that doesn’t allow remixes, it is an original design of my own making where I invested significant effort. As proof, I am including the Fusion360 CAD files here to prove my design is original from scratch and not a “remix” of that model. It is only a remix of my OWN model. I do respect licenses of others. Note to everyone else: Now includes Fusion360 Model (because reasons.. ) !&nbsp;Some people suggested that they would prefer to use a toothbrush or brass bristle brush to clean their threads instead of the parent <a href="https://www.printables.com/model/476890-super-screw-scrubber-a-sensational-solution-for-sp/remixes" rel="nofollow">Super Screw Scrubber </a>design with paper towel. For them, I've designed this alternative version of the scrubber that lets you slap on a cut-off toothbrush or brass bristle brush or similar and glue it onto the guide. This simple but effective modification lets you get a deeper clean with a longer reach!This version is the more reliable tapered version from the parent that should reduce any first layer print issues. Since the brush bristles are the key to cleaning in this version, the exact tightness of the threads is less important.<h4>Versions</h4><ul><li>DefaultSize (Recommended)</li><li>ShortBrush - if you have a brush that's not quite long enough to comfortably reach, this offers a closer spacing of the flat part to the lead screw by ~ 4 mm. </li></ul>&nbsp;<h3>Print Instructions (same as parent)</h3><ul><li>Print at high layer resolution, I recommend 0.1 or 0.08 if possible on your printer, so that the threads fit nicely. There are slight tolerances built into the thread design so that it should clamp nicely.</li><li>Most filaments should be fine.. but I would avoid anything like carbon fiber or glow in the dark filament to avoid any scratching of the screws (though most are made of steel that probably would not scratch anyways).</li><li>Orient the flat side down. I designed the part slightly asymmetrically so this is intentionally hard to screw up when placing on your bed :).</li></ul><h3>Use instructions </h3><ul><li>Find an old toothbrush or brass bristle brush, cut off the head. Use hot glue (recommended) or some other suitable glue to attach the head to the flat section as shown in the pictures.</li><li>Attach the clamp and brush to your lead screws as shown.. run the bed up and down (make the screws rotate), and hold the clamp in place as you do so.</li><li>Remove the widget, and clean the gunk off (can just rinse with IPA and/or acetone for most greases).</li><li>Re-grease your threads if you stripped all the grease off.</li></ul>&nbsp;<ul><li>Don't use as a regular toothbrush anymore, the ADA has informed me this is not an approved dental product after this modification :). <img src="https://media.printables.com/media/prints/477870/rich_content/50fb1bab-9bd4-4c1c-b9c8-59d26d9d371c/image.png#%7B%22uuid%22%3A%222da5821e-19c2-4860-832f-116d5b83b985%22%2C%22w%22%3A652%2C%22h%22%3A600%7D"></li></ul>&nbsp;3MF & STEP file included!

Super Screw Scrubber: A Sensational Solution for Sparkling Screws (Brushy Edition)

TOOLING

bigdog7

This spool adapter will fit any cardboard spool with a hub size of 55 to 57mm. Print with 10% infill (I used Gyroid) and with at least 2 walls.

X1/P1 COMPONENTS

A1-COMPONENTS

AMS COMPONENTS

AUTO

TOOLING

SPOOL-RELATED

CALIBRATION