MrBiGGz5150

SonOfUncleSam

I have the Atomi brand smart light/sconce from Costco (Model Number: AT1680) and wanted to make something fun to prevent birds from perching on the top of the light and defecating on it… Insert the need for a crystal themed topper! This is printed in two pieces - the crystal base, and the ring holder. For both, I would recommend printing in PETG, ABS or ASA (especially if living in a warm environment). The PETG seems to be holding up well, despite getting up to 100 degrees F here. Please note that you will have to bend the ring base slightly to slip this over top of the crystal base - this is intentional. Use a transparent filament for the crystals! Please see below for a very generalized guide for the settings/filament used: Crystal Base:<ul><li>Filament: Inland PETG Transparent</li><li>Nozzle = 0.6 mm (Recommended, but not entirely necessary. See tip below.)</li><li>Max Volumetric Speed = 9 mm^3/s</li><li>Infill = Gyroid at 7% infill</li><li>Tip: The slower you can go, the more transparent the filament will be! The 0.6 mm nozzle also produced a much more transparent result with respect to the 0.4 mm nozzle. If you happen to have one lying around, definitely use it!</li></ul>Ring Holder:<ul><li>Filament: Elegoo PETG Rapid - Black</li><li>Nozzle = 0.4 mm</li><li>Max Volumetric Speed = 9 mm^3/s</li><li>Infill = 100% OR increase walls to fill the object</li></ul>&nbsp;Included are both STL and STEP files! Happy printing, and enjoy the extra character added to the light!

Atomi Crystal Topper [Outdoor Light]

pool

vorkosigan78

This decorative tree is great to celebrate spring and Easter! Each leaf has been individually colored for a beautiful color print. The tree prints in two pieces which easily slide together.Included is a separate print profile with two text options - “Happy Easter!” and “Happy Birthday!” This text can clip onto the tree, and be removed as needed.&nbsp;Based on a modified vector image from <a target="_blank" href="https://www.freepik.com/free-vector/hand-drawn-family-tree-silhouette_44655388.htm#query=family%20tree%20silhouette&position=0&from_view=keyword&track=ais&uuid=8ed72374-8cc4-4a68-84bc-daa96ba46731" rel="nofollow noopener">freepik</a>.

Spring Tree Decoration W/ Easter and Birthday Msgs

wallet 

3djacobb

New Red Hood mask with Texture!the print is again the main part split and built on raft 3.In the stl file you have also the front part in one piece if you don't print on bambu lab.Have a nice printing

Red Hood Helmet V2 TEXTURA

Raptor 

SprocketStudios

A keychain yarn cutter in the shape of a pie! This will work for yarn up to about worsted weight, maybe aran if you're lucky. I made these as swag for a Pi Day knitting retreat. Both single color and painted profiles are available.&nbsp;Materials required:28mm rotary blade (available at craft and quilting stores)M3 x 8 flat (countersunk) screw&nbsp;After printing, place the blade on the bottom piece and carefully align the pie top so the notches line up. Drive the screw in from the bottom. For light use the printed plastic should be enough to hold it securely together, but if you're concerned about it coming loose you can either put a dab of glue inside the hole on the top piece, or insert a heat set screw thread into the hole. &nbsp;

Pie Shaped Yarn Cutter Keychain

janet

Lofted Goods

A mid century modern vase.&nbsp;No supports needed. Easy print. Can be scaled up or down however you like.&nbsp;Filament and hardware/non 3D printed items for this model can be found on my Amazon Storefront, linked here: <a target="_blank" href="https://hendricks.design/links/" rel="nofollow noopener">https://hendricks.design/links/ </a>

MCM Vase

Organization 

Jaxel

This model converts your 200mm x 66mm BambuLab spool into a storage container. I recommend using a translucent spool so that you can see into the container.&nbsp;The bottom part of the container is separated into 6 sections, with removable walls so that you can make each compartment as big or small as you want, using each of those 6 sections. The walls “snap” in to the bottom with a click.&nbsp;The top part fits removable shelves, which you can also customize to your needs. I have also included a few custom compartments for hotend assemblies, cutters/wipers/blades and compartment for a glue stick. You can find “empty” top compartments for you to customize further if you wish.&nbsp;You can find other models I have released for the X1C/AMS here:<a target="_blank" href="https://makerworld.com/en/u/2811301167/collections/109412" rel="nofollow noopener">https://makerworld.com/en/u/2811301167/collections/109412</a>&nbsp;If you appreciate my models, please consider <a target="_blank" href="https://ko-fi.com/ultrajaxel" rel="nofollow noopener">buying me a coffee</a>!

BambuLab Filament Spool Storage Container

Plant Potz

Wing-Art

The small and unique PTFE Cutter featured in the Bambu Lab logo is an indispensable tool that should find its place in every Bambu Lab toolbox. It represents not only functionality but also our passion for innovation and excellence - values that distinguish Bambu Lab. ___ Der kleine und einzigartige PTFE-Cutter im Bambu Lab Logo ist ein unverzichtbares Werkzeug, das in jedem Bambu Lab Werkzeugkasten nicht fehlen sollte. Er steht nicht nur für Funktionalität, sondern auch für unsere Leidenschaft für Innovation und Exzellenz – Werte, die Bambu Lab auszeichnen.&nbsp;

Bambu Lab PTFE-Cutter

Kool Toolz

R C 3D

PRINT PROFILES: The following are the only print profiles tested and approved by me. They are listed by the name I've given them in the print profile description. I can not guarantee the quality of any print profile posted by anyone other than myself.<ol><li>BLV Remix FR (v2)</li><li>BLV Remix FL (v2)</li><li>BLV Remix RR (v2)</li><li>BLV Remix RL (v2)</li><li>BLV Remix DRAWER</li><li>BLV Remix ACCDRAWER</li><li>BLV Remix Shorty (No Drawers)</li><li>Riser v3</li><li>Gasket</li></ol>&nbsp;SUMMARY: This is a remix of the BLV Riser. The intent was to simplify the assembly, print easier, and with less pieces/material. The original uses close to 2.7kg and this one uses 1.5kg for the primary body, the drawers are between 100-220g, the gasket is 60g of TPU. I will leave the original files in the raw files repository, but will be removing the print profiles that are outdated. The riser maintains the LED light strip sockets, the drawers, the build plate slot, and the high and low shelves for the top glass. I've added a gasket that will work with both the newer and older models. For the older models, you may need to glue it in place because the design intent was to drop it into a small recess, which is only present on v3. &nbsp;&nbsp;Ideally, use PETG or any other filament with a higher temperature resistance. PLA will deform over time. With that said, I use a PLA version on one of my printers which only prints PLA and I have no issues with it so far. I would recommend TPU for the gasket.&nbsp;&nbsp;This riser has a few versions:<ol><li>The first version is the original remix with drawers.</li><li>The second version is the remix without the drawers. Additionally, this version has a sloped inner edge to mount an LED strip at an angle for optimal lighting. I bored out the rear hole slightly so you can terminate the led strip in the rear and run the cable out of the back.</li><li>The third version (v3) is the original remix, but with a slot for a gasket and sloped edges inside for mounting an LED strip at a slight angle.</li></ol>&nbsp;Printing/Assembly:If you decide not to use the print profiles, these are the settings I used.&nbsp;<ul><li>Global Settings:<ul><li>0.2mm Layer Height</li><li>3 Wall Loops</li><li>Enable Supports: Normal (Auto)<ul><li>Snug</li><li>On Build Plate Only</li></ul></li></ul></li></ul>&nbsp;Assembly:The assembly can be done in a matter of seconds. The joints are made with dovetails and a fairly tight fit for a nice press-fit application.&nbsp;<ol><li>Assemble the front two pieces</li><li>Assemble the rear two pieces</li><li>Assemble the front and rear halves together</li></ol>&nbsp;That's all there is to it. Follow my facebook page, RC3D, for giveaways and entry details as well as my latest models.&nbsp;CHANGELOG:&nbsp;UPDATE 12/22/2023:Added v3. This version includes the same sloped edges that the shorty does, as well as a slot for the gasket. I've also included the gasket since the original BLV has nubs that won't work right with this one. The gasket is designed to simply drop into a recess, so it will work on older versions, but you may have to glue it in place.&nbsp;UPDATE 11/25/2023:Added a second version without the drawers. Removed several print profiles and re-organized the files.&nbsp;UPDATE 10/31/2023:I revised the drawer insert and the drawer itself. The new version is very similar, but required just a few changes in order to work probably with the new drawer insert. The insert now fits into the side of the drawer as well, so you'd insert the piece and slide it into the side. This helps avoid issues with alignment and helps position the insert correctly. I also remove the accessories tab from the insert as it made no sense in this application. Instead, the other half of the drawer will just be empty.&nbsp;UPDATE 10/27/2023:Update the insert to fit better, revised the drawer for better printing and fit. The insert and the drawer need to be super glued and held in place for a minute or so (I used clamps) so the bottom sticks to the existing drawer and doesn't snag the edges when the drawer is inserted.&nbsp;UPDATE 10/20/2023:Uploaded an insert to convert the drawers to one similar to the original model. Simply drops in and was intended to just glue in place. I haven't yet tested it, but it's going on the printer tonight so if you'd rather wait I will update this description when mines complete.&nbsp;INITIAL RELEASE 10/15/2023:&nbsp;The design is based on the popular AMS riser by Benlevi. My goal was to reduce the number of pieces, complexity of assembly, and ease of printing. The result is this 4-piece body with dovetail interlocks and 2 drawers. I will be improving on this and am currently printing the latest iteration, but its here for you to try as well. If you find any issues, let me know and I'll make it right.The riser has slots on top for the AMS feet, high and low shelves for the glass Lid, build plate holder, and two drawers.&nbsp;ASSEMBLY:&nbsp;Assemble the front two pieces, then the rear two pieces, then assemble the resulting front and rear halves together. The sequence is important. I glued the pieces for peace of mind, but I'm not sure it's totally necessary. The pieces should only slide together one way.&nbsp;PRINT SETTINGS:&nbsp;• 3 walls• 15% gyroid infill• Supports, snug auto, on build plate only (this is for a small lip at the bottom that will not be visible when installed.)

AMS Riser Remix

new ams

Phenix

I love the design but i wanted to have a dual color lid.So i removed the old label and added a new embedded one with bambu studio.For all without AMS i added a version without label. &nbsp;Printed on textured PEI plate just looks awesome.&nbsp;I recommend to use my print profile as the lid can be broken with wrong settings.&nbsp;Design found on printables made by codysechelski

Gridfinity 608 Bearing holder (with dust cover)

Oosh Proto

The Manual Material System is made to fit 4 x Filament spools.Each spool can be manually fed through one of the four corresponding holes, through the internal Filament Duct where it protrudes out one single exit point at the rear of the Manual Material System. From there the filament feeds directly into your printers extruder.The manual Material System is designed to work with the Oosh Proto Filament Spool holders that have smooth bearings integrated into them for each filament spool. This design allows a significantly low friction point between the spool holder and the filament spool so your printer is doing less work and is subjects to less wear and tear on its mechanical parts such as the buffer or extruder/hotend.Below the Manual Material System there are 5 x Bambu Lab build plate draws to keep your build plates protected and all in order with an additional 2 x side drawers for miscellaneous tools and consumables. This Material Management System is designed to fit perfectly on top of the Bambu Lab X1C, P1P and P1S. (Or beside your pinter on your desktop)&nbsp;There are various spool holder sizes availible to download on ou rdesign page that fit into the top of the buildplate holder. It is also designed as part of our modular storage system so our Manual Material System will lock in place on top of the Oosh Proto build plate storage if you're printing without the AMS and plan to us our Material Management System onto of your printer.We used TPU95A for the feet so it will stay in position on the Bambu Lab glass top(We also think this looks aesthetically pleasing next to your Bambu Lab printer or next to you on your desktop)

Bambu Lab MMS Build Plate Storage

Bambu

Ryan Meredith

Gridfinity pen, pick, file, or whatever holder

Gridfinity - Pen Holder

GFinity

Matti

Want to give your loved ones a little surprise for Easter? But maybe it's not your loved ones after all?&nbsp;Then I have a little Easter egg for you with a nice and meaningful surprise inside.&nbsp;&nbsp;&nbsp;Please note, after printing the egg, the closure is a little stiff. This will improve over time.Opinions, suggestions for improvement and pictures are very welcome.

Easter egg with a special surprise

gifts

3DPmom

<img class="image_resized" style="width: 30.8%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000229475/design/ef01914b-e52f-46bd-9810-329db5a250f1">Gardening just got fun with this cute little carrot patch 🥕🥕 Plant it on your desk, coffee table or wherever you need some fidgeting fun.&nbsp;Dimensions of Large Carrot: collapsed 2 ½ in. x 1 ⅝ in.; expanded 5 ½ in x 1 ⅝ in.Dimensions of Small Carrot: collapsed 2 ¼ in. x 1 ⅜ in.; expanded 4 ½ in. x 1 ⅜ in.Dimensions of Bed of dirt: 7 in. x 2 ⅛ in. x 1 in.Dimensions of Planter box: 7 ¼ in. x 2 ½ in. x 1 ¼ in.&nbsp;<img class="image_resized" style="width: 30.51%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000229475/design/0095922b-c6d0-47d9-88bb-e7148aaa0185">Layer Height 0.2mmPLA works great15% InfillNo supports needed&nbsp;Note: I recommend printing the carrots on a smooth print plate (you can use a glue stick/hair spray or add an outer brim to the carrots if necessary to help with first layer adhesion.)&nbsp;Here is how I arranged my print profile (notice that on plate #5 I arranged all 4 carrots to print together to cut down on purge waste):Plate #1: Large Carrot (2 colors)Plate #2: Small Carrot (2 colors)Plate #3: Bed of dirt (1 color)Plate #4: Planter box (1 color)Plate #5: 2 Large Carrots, 2 Small Carrots (2 colors)&nbsp;“Assembly” is simple, when all the pieces are printed, simply place the bed of dirt in the planter box and add the carrots.&nbsp;<img class="image_resized" style="width: 30.37%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000229475/design/30a5c647-0d22-4eb6-9e73-82994f4e6b02" width="358" height="60">6/29/24 I added a new Print Profile for a 2 Carrot Planter Box:)&nbsp;<img class="image_resized" style="width: 30.6%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000229475/design/9e3b143b-5c81-450d-a2eb-a958d963461d">My designs are free for personal and non-commercial use. If you would like to sell them for commercial use, send me a message and we can discuss the details:)&nbsp;<img class="image_resized" style="width: 30.17%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000229475/design/14371598-53d9-4ddd-9638-93d796fc08b5">If you like my work and want to help support it, you can buy me a Diet Coke at <a target="_blank" href="https://www.buymeacoffee.com/3dpmom" rel="nofollow noopener">https://www.buymeacoffee.com/3dpmom</a> Thanks so much!&nbsp;Have fun printing!

Carrot Garden 

La Jefa

CK Designs

This is my take on a back up lid lock design for packout model 48-22-8430. It is designed to press fit into the side of the handle unlike other designs that need a screw and a hole drilled through the handle so that way you can use it full time or if you just want to test it and see if you like it you can without drilling permanent holes in your handle. It's purpose is to be used as a backup latch to keep the lid from opening up and spilling everything inside in case you forget to close the factory latches. &nbsp;I would recommend removing the handle to install these as they are a very tight fit. Removing the handle is easy, just use a flat head screw driver to push the metal pins towards the inside and use pliers or vice grips to pull the pins out. I would also recommend a rubber mallet or some type of hammer to gently tap these all the way in. I have also added holes in the sides so you can put a long screwdriver or other long object through the hole in the handle to remove these if you want to take them off.