Mr2mat0o

ABDELat

All gridfinity basic bins, starting with 1x1x1 up to 6x6x12. Each file includes all heights from 0 (lid) to 12 (87.55 mm).&nbsp;These bins don&#39;t have magnet/screw holes. As long they are used for Drawers or non-moving places you don&#39;t need them.<ul><li>no labeling tab</li><li>labeling tab on the left side</li><li>labeling tab on the right side</li></ul>The generated 3mf-files are all based on this <a target="_blank" href="https://github.com/kennetek/gridfinity-rebuilt-openscad" rel="nofollow noopener">openSCAD rebuild</a>. I&#39;m using them a lot, they work as intended, easy to print.I&#39;ve include all printable profiles. The 6x6 version isn&#39;t currently printable, so there is no printable file. The 3MF-Version of each combination can also be downloaded in the raw-model-files tab.<h4>Bin Sizes in mm</h4>for all that don&#39;t want to calculate the sizes:<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000047599/design/760bc579-31a2-4876-9f86-9abd4176c954.png"> <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000047599/design/44efbb41-6eed-494c-bd99-429ecba1642e.png">&nbsp;If you&#39;re looking for an easy to print grid, i recommend <a target="_blank" href="https://www.printables.com/model/430144-gridfinity-base-with-snap-connectors" rel="nofollow noopener">Gridfinity base with snap connectors</a>. If you have an Ikea ALEX drawer, <a target="_blank" href="https://makerworld.com/de/models/28581" rel="nofollow noopener">here you`ll get all needed parts (inkl. spacer)</a>.&nbsp;Other Tools used:All files are generated with the help of a modded version of <a target="_blank" href="https://github.com/OutwardBuckle/OpenSCAD-Bulk-Export" rel="nofollow noopener">OpenSCAD-Bulk-Export</a>. Check out this git if your interested in bulk-exporting from OpenSCAD&nbsp;Printing:Print it in any material you like. For most applications PLA is good enough. The slicer recommends a brim. With a bit of glue or the textured PEI sheet it doesn&#39;t move.The 6x6 can`t be printed in one piece! Use the Slicer to split it as you like.I´ve in also included print-profiles for all versions.&nbsp;Additional Tools and Helpers<ul><li><a target="_blank" href="https://makerworld.com/models/208796" rel="nofollow noopener">Gridfinity Height ruler - slim Edition</a>: Helps you to find the correct bin height.</li><li><a target="_blank" href="https://makerworld.com/en/models/476336" rel="nofollow noopener">AIO parametric Gridfinty Project</a>: Generate you own gridfinity bin.</li><li><a target="_blank" href="https://makerworld.com/en/models/28581" rel="nofollow noopener">Slim Gridfinity Base for Ikea Alex:</a> Perfectly fitting grid for Ikea Alex Drawer</li></ul>&nbsp;<h3>Parametric Model Maker</h3>I&#39;ve made a SCAD Version to work with the new <a target="_blank" href="https://makerworld.com/en/makerlab/parametricModelMaker" rel="nofollow noopener">Parametric Model Maker</a>. Just download the “Makerworld.scad” (from Raw Files) and use it there. In the Customize Section, you can change most parameters the get the desired Bin you want. Use the button right next to do Download or <a target="_blank" href="https://makerworld.com/en/makerlab/parametricModelMaker?designId=47599&amp;from=model_page&amp;scadUrl=https%3A%2F%2Fmakerworld.bblmw.com%2Fmakerworld%2Fmodel%2FUSd2da6c53f14d3c%2Fmsfile%2F2024-04-16_1fd4308bde644.scad&amp;type=user" rel="nofollow noopener">use this link.</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000047599/design/2024-05-10_09f49611aee0f.webp"><figcaption>Quick preview of the parametric model maker</figcaption></figure><h3>How to download the RAW files</h3>Since the last UI change the download option is a bit hidden. This is the current way to download the RAW files or the File for the <a target="_blank" href="https://makerworld.com/en/makerlab/parametricModelMaker" rel="nofollow noopener">Parametric Model Maker</a>.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000047599/design/2024-05-03_e07cda6ec065f.jpg"></figure><h3>Share your makes and support me</h3>If you like my work, give it a 🚀 boost 🚀 (the button is right below the Download). You can <a target="_blank" href="https://brickbank.app/support/" rel="nofollow noopener">support me here</a>, via <a target="_blank" href="https://ko-fi.com/brickbankapp" rel="nofollow noopener">Ko-Fi</a> or <a target="_blank" href="https://patreon.com/brickbankAPP" rel="nofollow noopener">Patreon</a>. Please leave a comment or share your makes 😁.  I appreciate your support! If your interested in selling the printed models DM me.&nbsp;Updates:2024-02-04: in the raw files section you can find premade zip-files wiht all generated boxes for each size, starting with 01x01x00 up to 12x12x12. This should help to create any box combination you like. Note: not all files can be printed as one piece! All zip files together are ~ 1.25GB i recommend to download them one by one!

Ultimate Gridfinity Bins Collection + Parametric

gridfinity 

FlorinV

Please share your make and let me know your opinion about this model. Thank you and have a great week !&nbsp;Update 11.03.2024: Added “Skull" lid. There is an optional profile for printing this lid. <a target="_blank" href="https://makerworld.com/en/@timon1201" rel="nofollow noopener">@timon1201</a> did a similar lid and gave me this idea. thanks !&nbsp;Update 29.12.2023: Added “Pine cone” lid. You can find it in the Optional Lids profile. The lid has fine details, please be sure your printing plate is clean (no finger grease etc.).&nbsp;The Automatic Toothpick dispenser:<ul><li>All parts are 3d printed, all in one plate. No AMS needed.</li><li>Several Lids to choose from and a clean lid to customize it as you wish. “Voronoi” and “Yoda” lid are found in the model profile. Other optional lids will be added to the “Optional Lids” profile.</li><li>Each part easily fit together. Please check the short building video bellow. ( 1min 30sec minutes to build )</li><li>works with toothpicks of max 66mm and approx. 2mm diameter (normal toothpicks I've found ). Please shake the dispenser to arrange the toothpicks correctly and parallel. Throw away toothpicks that look too different than normal ones: damaged, askew.</li><li>The two arms that hold the big parts together have printed on them L and R, to be sure you set them correctly (left and right).</li><li>The 3d printed spring should be inserted like in the video, first on the back with the other end up, then the front.</li></ul><figure class="image image_resized" style="width:30.4%;"><img src="https://makerworld.bblmw.com/makerworld/draft/682841/2023-12-14_9977d673e0c9a.png"></figure><ul><li>Second spring is optional (the left one). After some use, it will work smoother, as the parts needs some time to slide easier one on each other. From my experience, the right spring is enough, but feel free to play around.</li><li>If some of the toothpicks are thrown, it means some of them are a bit too thin. You can dispense them better by releasing the push pad slower. :)</li><li>If at some moment it stops from giving toothpicks, it can happen that the feeding zone is blocked by two toothpicks (usually because some toothpicks are smaller/bigger, damaged, askew etc). It's easily fixed by shaking a bit the whole model and/or press harder on the push part.</li><li>The parts are finely designed to work together, so I suppose it's important to have a good filament and calibrated. Please use my tested profile.</li><li>You can choose from two different lids (in the main profile, more lids in a separate profile - Optional Lids). The “Yoda” lid is a separate plate as it's using AMS and 2 colors.  You can print it without AMS and leave empty space in the lid where letters and Yoda is (don't print the letters and Yoda).</li><li>I've added another profile (For Thinner Toothpick - only base part) containing only the base part for cases where your toothpicks are often flying out of the dispenser. This is usually a problem related too thin toothpicks. This part is only the base part which should handle such toothpicks.</li><li>Based on the review of eric.joschko (thank you!!), he scaled everything to 108% and everything works perfect for he's toothpicks which i understood they are 68mm length.</li><li>Based on review of Sven_fretz (thank you!!): “scaled everything up to 125% and it works fine with my 80mm toothpicks.”</li><li>For better spring action and to be sure they keep their power better in time, you can print only the springs with PETG.</li></ul>This is the building video (1min 30sec minutes ): <a target="_blank" href="https://youtu.be/BJucPYljE2o" rel="nofollow noopener">https://youtu.be/BJucPYljE2o</a><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=BJucPYljE2o"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/BJucPYljE2o" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;If you like this model, please check out my new Salt & Pepper dispensers: <a target="_blank" href="https://makerworld.com/en/models/228050#profileId-245632" rel="nofollow noopener">https://makerworld.com/en/models/228050#profileId-245632</a><figure class="image image_resized" style="width:56.68%;"><img src="https://makerworld.bblmw.com/makerworld/draft/682841/2024-03-06_0e2805d6f36fc.jpg"></figure>&nbsp;Or, my fun and easy to print, easy to use filament cutter: <a target="_blank" href="https://makerworld.com/en/models/137257#profileId-149353" rel="nofollow noopener">https://makerworld.com/en/models/137257#profileId-149353</a><figure class="image"><a href="https://makerworld.com/en/models/137257#profileId-149353" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/682841/2024-01-15_0a30aa152023c.png"></a></figure>&nbsp;Disclaimer: YOU ACKNOWLEDGE, BY YOUR USE OF MY MODELS, THAT YOUR USE OF THE MODELS IS AT YOUR SOLE RISK.<h2>LIMITATION OF LIABILITY</h2>UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL OR EQUITABLE THEORY, SHALL THE DESIGNER OF THE MODELS BE LIABLE TO YOU OR TO ANY OTHER PERSON FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL LOSSES OR DAMAGES OF ANY NATURE ARISING OUT OF OR IN CONNECTION WITH THE USE OF OR INABILITY TO USE THE MODELS OR 3D PRINTED MODELS.

Toothpick Dispenser - all parts printed

Random ass shit. 

KYZ Design

<h3>Bees may have bestagons but humans still build rectangular walls. So here are the rectangular frame pieces!</h3>There are framed pieces for a few different sizes:<ul><li>The 12x9 System - recommended for X1 and P1 series printers - the middle pieces are 12 cells wide by 9 cells high. This makes the biggest pieces per print on a 256x256 bed with a filament cutter exclusion area (i.e. on a P1P/P1S/X1C without physically blocking out the filament cutter). The middle piece can be found <a target="_blank" href="https://makerworld.com/en/models/16011" rel="nofollow noopener">here</a> and I also included this in the print profiles as it is my model (it's one of the first things I modelled and shared after getting my P1P!).</li></ul>&nbsp;<ul><li>The 12x10 System - recommended for the A1 - the middle pieces are 12 cells wide by 10 cells high. This makes the biggest pieces per print on a 256x256 bed without an exclusion area (i.e. on an A1 or a <a target="_blank" href="https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations" rel="nofollow noopener">tweaked</a> P1P/P1S/X1C). The middle piece can be found <a target="_blank" href="https://makerworld.com/en/models/16011" rel="nofollow noopener">here</a> and I also included this in the print profiles as it is my model.</li></ul>&nbsp;<ul><li>The 8x7 system - recommended for the A1 Mini - the middle pieces are 8 cells wide by 7 cells high. These are designed to maximise the 180x180 bed of the Prusa Mini, and consequently will also maximise the bed of the A1 mini. The middle piece for this system can also be found <a target="_blank" href="https://makerworld.com/en/models/22521" rel="nofollow noopener">here</a>, uploaded by the OG creator, rostap. I did not include the middle piece here as rostap has modelled it first and uploaded it to his page.</li></ul>&nbsp;<ul><li>The 10x10 system - the middle pieces are 10 cells wide by 10 cells high. These also fit on a 256x256 bed. This makes panels that have a more rectangular aspect ratio and less cells but you may have already started printing these. These may also better fit your wall space that you are trying to fill up due to the slightly different dimensions. The middle piece can be found <a target="_blank" href="https://makerworld.com/en/models/22521" rel="nofollow noopener">here</a>, uploaded by the OG creator. I did not include the middle piece here as rostap has modelled it first and uploaded it to his page.</li></ul>&nbsp;<ul><li>The 10x8 system - the middle pieces are 10 cells wide by 8 cells high. These max out a 220x220 bed (Ender 3 and Similar). The middle piece can be found <a target="_blank" href="https://makerworld.com/en/models/22521" rel="nofollow noopener">here</a>, uploaded by the OG creator, rostap. I did not include the middle piece here as rostap has modelled it first and uploaded it to his page.</li></ul>&nbsp;&nbsp;For those of you that want other sizes for other printer beds, remix is allowed! Or leave a request in a comment if you can wait :)&nbsp;If you need HSW help in general, check out the honeycombwall subreddit.&nbsp;<h3>Check out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/18964" rel="nofollow noopener">this collection</a> for my other Honeycomb Storage Wall models.</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/594876/2023-12-10_fde779d8f407b.jpg"></figure>

Framed HSW - Various Sizes - Honeycomb Storage Wall

Honey Comb System 

Robbicon

I designed another AMS Lite wall mount, the AMS is easily removable and the mounting screws are hidden by the part which slides in.&nbsp;Update 01.01.2024Added a loose fit wall part, two people had problems with sliding the parts together. Be careful and take the new loose fit version or some sanding paper before slinding together. Avoid to much force for sliding it together, may you will not get it apart again.&nbsp;Printed in PLA without any problems.&nbsp;Please let me know if you have suggestions for improvement, happy printing :-)

AMS Lite flat and removable wall mount with hidden screws

mounts

suit1337

since the original cap was way to high for me needs, i made it low profile, but this did not distribute the water well enough, and it tended to splash on one side - so i added this “knob” in the middle, that solved this issueprints with no supports

gridfinity

Random ass shit.

Honey Comb System

mounts

Hydroponic