Mr.G

Make-A-Print246

Hello print enthusiasts,here you can find the first version of my robot hand. &nbsp;<img class="image_resized" style="width: 15.68%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000510770/design/2024-06-25_f412a2c9cbac.png"> The hand is assembled from several parts:&nbsp;<img class="image_resized" style="width: 58.22%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000510770/design/2024-06-25_bb20f1e496db8.png">&nbsp;When assembled, the hand can still move freely. The hand holds its position reliably, thanks to a locking mechanism in the joints. &nbsp;Please also take a look at the assembly instructions to put it together correctly.The alignment of the parts is important. That´s why I have numbered the fingers. &nbsp;It is also important that the support contours are removed cleanly.&nbsp;I am also uploading the STEP files and would be very happy to see remixes of this construction. &nbsp;I hope you enjoy printing and assembling the model. &nbsp;Best regardsAlexander Make-A-Print &nbsp;<img class="image_resized" style="width: 22.6%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000510770/design/2024-06-25_9366df857a7f9.png">

Moveable Robot Hand (left) joined together (PLA)

ROBOT HAND

________________________________________________________________________________________________ ☀️ If you want to sell prints of this model, as well as all of my models, future and past, <a target="_blank" href="https://patreon.com/ChromaC3D?utm_medium=unknown&amp;utm_source=join_link&amp;utm_campaign=creatorshare_creator&amp;utm_content=copyLink" rel="nofollow noopener">become a member of my Patreon for a commercial license!</a> ☀️ ________________________________________________________________________________________________A beautiful set of bookmarks in the traditional style of “Under the Wave off Kanagawa” with built in holes for rope.&nbsp; Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used:<a target="_blank" href="https://kingroon.com/collections/3d-printer-pla-filament?sca_ref=6268797.MtX4KIZPrO" rel="nofollow noopener">PLA Kingroon Black</a> Transmission Distance: 0.4<a target="_blank" href="https://kingroon.com/collections/3d-printer-pla-filament?sca_ref=6268797.MtX4KIZPrO" rel="nofollow noopener">PLA KINGROON Blue</a> Transmission Distance: 4<a target="_blank" href="https://s.click.aliexpress.com/e/_DcIeqfV" rel="nofollow noopener">PLA+ Jayo Mint Green</a> Transmission Distance: 4.5<a target="_blank" href="https://s.click.aliexpress.com/e/_DcIeqfV" rel="nofollow noopener">PLA+ Jayo Sky Blue</a> Transmission Distance: 4.4<a target="_blank" href="https://s.click.aliexpress.com/e/_DDjc1SR" rel="nofollow noopener">PLA Jayo Matte White</a> Transmission Distance: 4.6<a target="_blank" href="https://eryone3d.com/collections/anniversary-sale/products/1-75mm-pla-filament?ref=uqcriwyg" rel="nofollow noopener">PLA EryOne Rose Red</a> Transmission Distance: 2.4  Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue At layer #9 (0.8mm) swap to Mint Green At layer #11 (0.96mm) swap to Sky Blue At layer #12 (1.04mm) swap to White At layer #16 (1.36mm) swap to Rose Red for the rest. If you like my work, drop me a follow!🤜🤛 Want to buy me a coffee in show of support?☕ <a target="_blank" href="https://paypal.me/Chroma3D?country.x=BG&amp;locale.x=en_U" rel="nofollow noopener">Paypal Me</a>&nbsp; How to do more than 4 colors on a single AMS? To use more than 4 colors with a single AMS is pretty simple when it comes to HueForges. Always start the print from either Bambu Studio or Bambu Handy App - This will allow you to map the rolls of filaments to a certain slot in the AMS: <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000505488/design/2024-04-18_0f99fb49a11e7.png"> Now map the first 4 colors (which should already be inserted in the AMS to Slots 1 - 2 - 3 - 4 Once thats done move to maping colors 5 - 6 - 7 - 8 to respectively AMS Slots 1 - 2 - 3 - 4 again! <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000505488/design/2024-04-18_55b3ae6ccce94.png"> This will allow you to Change the rolls of filament once the printer is done with that color. For example, in the picture above once we are done with the Black color (Which is usually first) we are going to remove the black roll (you can do that while printing) with White, then once Charcoal Black is done we are going to change that to Red, Dark Gray to Yellow and we are done. ~ You can do that with as many colors as you need! If you like my work, drop me a follow!🤜🤛

"Cherry Blossom Tide" - Bookmarks Set

Bookmarks

mail.iou

update 04/05/2024If you want a printing method that is easy to maintain, you can consider my redesign:Reverse Blade Collapsing Katana - Rurouni Kenshin<a target="_blank" href="https://makerworld.com/en/models/414234" rel="nofollow noopener">https://makerworld.com/en/models/414234</a>&nbsp;update 01/12/2024 This knife is a one-piece printed design. If you are not sure whether the filament you bought can print this work well, you can refer to my new creation &#34;Nichirin Samurai Sword&#34;. This work uses a split printing design to facilitate future maintenance and blade replacement. Nichirin Samurai Sword : <a target="_blank" href="https://makerworld.com/en/models/135353" rel="nofollow noopener">https://makerworld.com/en/models/135353</a>&nbsp;Reverse Blade Sword miniThis is a smaller version of the Reverse Blade Sword, with a total length of about 80cm, suitable for A1 mini printers or people who don’t want to print too much. If you want to experience the full size, please go to <a target="_blank" href="https://makerworld.com/en/models/111322" rel="nofollow noopener">https://makerworld.com/en/models/111322</a>&nbsp;Notice It is recommended to use PLA+ and Textured PEI Plate for printing. If the viscosity of the plate of your 3D printer deteriorates, be sure to use glue to increase the grip to prevent the printed part from falling off halfway and wasting filament.After printing, please remove the support at the end of the knife.<figure class="table" style="width:77.33%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/816156/2023-12-29_51c8c09c32f62.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/816156/2023-12-29_60e68ce20b26b.png"></figure></td></tr></tbody></table></figure>Repair of fallen blades This work has been printed and verified on P1S, A1, and A1 mini printers and resized. It is currently tested using three materials: Bambu PLA, eSUN PLA+, and eSUN ePLA-Matte. The blade surface can be freely expanded and contracted without falling off. However, since PLA material is not resistant to high temperatures, if it is stretched and swung back and forth many times quickly, it will cause the blade to be heated and expand, causing the blade to be thrown out. At this time, you can repair it with a simple method. Please use a tape with high viscosity that is not easy to fall off, such as Acetate Cloth Tape. Stick it on the entrance where the blade falls off. The amount of tape can be adjusted to increase or decrease the size of the enlarged hole. Then push the blade down and plug it back into the entrance to repair it.<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/816156/2023-12-30_59e2edca56a86.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/816156/2023-12-30_9ae8cbf98f5af.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/816156/2023-12-30_75ce6d29cda6e.png"></figure></td></tr></tbody></table></figure>&nbsp;&nbsp;

Reverse Blade Sword mini ( Samurai Sword)

sword

Duane777

Print in TPU only with minimal supports. I didn't need supports for the Silk TPU I used.

Voronoi Case iPhone 11

IPhone case

Fletch

Kit card for a Tyrannosaurus Rex skeleton puzzle.&nbsp;Connectors can be easily removed using just your fingers. The height of each bone and the spacing for placement both measure 2mm, providing a very snug fit.&nbsp;Various sizes availableRegular - 140mm tallLarge - 165mm tallMini - 125mm tall&nbsp;There are 2 options for each size, with or without numbers. The large size includes an optional stand, but isn't required since it's freestanding.&nbsp;Guide for the profiles with no numbers1 Plate<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/622215/2024-02-27_a5515f1741b418.png"></figure>&nbsp;3 PlatesCard 1<img src="https://makerworld.bblmw.com/makerworld/draft/622215/2024-02-23_5afd920d6cbc28.png">&nbsp;Card 2<img src="https://makerworld.bblmw.com/makerworld/draft/622215/2024-02-23_8c4c08b3381f78.png">&nbsp;Card 3<img src="https://makerworld.bblmw.com/makerworld/draft/622215/2024-02-23_1e395fd60645a.png">

T-Rex Skeleton Kit Card

Kit Card

NaraaPrints

Hi there!&nbsp;I'm thrilled to release my 3D printed pumpkin with a crochet effect! Using a handcrafted crochet pattern, I've tried my hardest to give the pumpkin a really realistic crocheted effect.&nbsp;Its multifunctionality as well! The hollow interior is ideal for sweets. But there's more! Place an LED light within for maximum spooky effect.&nbsp;Print with supports enabled for the best finish.Photo printed in eSun PLA+ Orange and Brown

Handcrafted Pumpkin with Detachable Lid

Pumpkin

Rikskeff

Twist lock container to keep your items secure, perfect in your car, bathroom or when traveling.&nbsp;The top screws and locks into place with a very satisfying click sound.&nbsp;The model has tight tolerances and might be hard to turn the first couple of times. After a few times it will run smooth.No supports needed.&nbsp;Check out the smaller version below, perfect when traveling.<a target="_blank" href="https://makerworld.com/en/models/413689#profileId-318275" rel="nofollow noopener">https://makerworld.com/en/models/413689#profileId-318275</a>&nbsp;<figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000431105/design/2024-04-22_39e861264e4ea.gif"></figure>

Twist lock container | No supports

Lock Container

Thinkable

Preparing the Krabby Patty! This 20mm mini Krabby Patty is super cute and super easy to print! The parts fit together with no hardware or glue. Just print and assemble!<figure class="image image_resized" style="width:73.5%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000433094/design/2024-04-17_41f104a64a95f8.webp"></figure>Use the 0.2mm Nozzle to get really fine details. You can print yours on whatever printer you like, I&#39;ve included printing profiles with some settings I&#39;ve used so all you have to do is click Print!<ul><li>0.2mm Nozzle</li><li>No Supports</li><li>No Brims</li><li>No AMS Required</li></ul>Be sure to POST YOUR MAKES. I would love to see them!

Mini Krabby Patty - 20mm 

Krabby Patty

wuguigui

Updated 20230928I found the first version bent after standing on the table for 1 night, so I enhanced the back structure, I suggest using PLA tough or PLA+ to print the connection parts, the 4 boards using PLA basic are fine. Also when you print the 4 boards part, they have a probability of deformation after cooling from the hotbed, so you'd better to press them with a heavy object after printing.Recommended Filament: Bambu Lab <a target="_blank" href="https://shrsl.com/4duvx" rel="nofollow noopener">PLA Basic</a> or <a target="_blank" href="https://shrsl.com/4duvd" rel="nofollow noopener">PLA Tough</a>____________________________________________________________________________&nbsp;As the new A1 mini has been released, the “Bambu Filment Swatches” in the package of A1 mini Combo look so nice, but I don't like the way they stay together, so I designed a new frame to display them.&nbsp;To make all parts printable in small A1, I spent a whole night figuring out an idea to make it possible, all the parts can be printed without support. The swatch can be taken down easily because of the Inclined base design. You can also choose to mount it on the wall or put it on the table.&nbsp;See the images to get more information. If you like it, please give my design a like, and follow me, I will keep on designing more things.&nbsp;Have fun!<figure class="media"><div data-oembed-url="https://youtu.be/9_ne1zI8iBw"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/9_ne1zI8iBw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/423914/2023-09-28_c0cfdeb595f03.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/423914/2023-09-28_4366a6bcc9301.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/423914/2023-09-28_ec15465091c93.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/423914/2023-09-29_e73e5f8ef218f.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/423914/2023-09-27_cd6b6f84e9f1b.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/423914/2023-09-27_e09c53cd22683.png"></figure>

Bambu Filament Swatches Frame

Color Swatches Plate

im.jackharvest

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/844994/2024-04-11_56767204580198.png"></figure>Visual Warning: I somehow ended up with 6 kids, and I have neglected to instill the fear of Lucifer into them in regards to the sanctity of electronics; My Switch is in pretty rough shape, please shield the eyes of those with gentler gag reflexes. Thank you.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/844994/2024-04-11_9c6fa8bae21568.gif"></figure>&nbsp;This builds on the original SnapSwitch design, and simply adds a headrest adapter. They are compatible with one another, so if you printed <a target="_blank" href="https://makerworld.com/en/models/421655" rel="nofollow noopener">SnapSwitch: Nintendo Switch Sun Visor Snap Mount</a>, enjoy mounting it directly to the back seat with the SnapSwitch universal headrest adapter.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/844994/2024-04-11_3254d881801628.png"></figure><h3>Super Simple to Print (Uses just 56g)</h3><h3>Snaps Into Place Using PETG Spring-Loaded Design (PLA will snap, melt, and be ultra brittle - Do. Not. Use it.)</h3><h3>Compatible with Both Original Nintendo Switch and OLED Models (and Switch Lite, just snip the bottom nub shorter so it locks in with the screw hole instead of the blank-hole that the OG and OLED have (see below).</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/844994/2024-04-11_ecc1363d856138.webp"></figure>&nbsp;Attaching is so easy, it can be done one-handed easily.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/844994/2024-04-11_28441d6d8eb698.gif"></figure>&nbsp;Now the rear passengers can enjoy the ride in style. Take the joycons off or not, doesn&#39;t matter either way. 👍

SnapSwitch: Nintendo Switch Rear Seat Snap Mount

Nintendo Switch Holder

benlevi

<h2>BLV - AMS Riser for X1C V3.1 Final</h2><figure class="table"><table><tbody><tr><td style="background-color: hsl(0, 0%, 30%)"><h3>Introduction</h3></td></tr><tr><td>I&#39;m Ben Levi, and I want to talk to you about this BLV AMS Riser that I designed: So, when the AMS is sitting on top of the printer, you can&#39;t really see what the printer is doing, and you can&#39;t even open the top glass cover to let some air in when you&#39;re printing High temp stuff. basically, something that will hold the AMS and free your Glass top cover will be a good solution for that. Now I&#39;ve seen some similar AMS risers before, but none of them really wowed me.. i think..That&#39;s why I decided to come up with this sleek BLV AMS Riser design, easy to use, easy to put together, and reliable. I even added two handy drawers for your tools and stuff, a special shelf that can hold up to 4pcs Build Plates, built-in Dual LED strips. Sure, it took me a while, but I got it (almost..) done.As some of you may know, I love contributing to this wonderful community, which is why I chose to share with you my project without any fee or money. Among other things, I&#39;ve also given you access to the original CAD files (F3D,STEP) so that you can easily make changes, add, and improve as you see fit. Please, if you publish a remix, make sure to link it to the original project as a remix so that others can benefit from your effort. I kindly request not to use the files for commercial purposes without explicit permission from me.&nbsp;Thanks, Ben Levi<a target="_blank" href="https://www.paypal.com/paypalme/BenBLV" rel="nofollow noopener">If you want, buy me a beer </a>:)&nbsp;</td></tr></tbody></table></figure><figure class="image image_resized" style="width: 58.95%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-09-25_370cc55ef0c1d.png"></figure><h2>Main features</h2>These are just a few design features I&#39;ve planned. If you have more ideas, please share them with me, and I can incorporate them into the design. Also, feel free to add remixes (CAD files are available for download).<ul><li>Easy installation</li><li>Dual LED strip installed in optimal angle for LiDAR.</li><li>AMS riser</li><li>Top glass Holder</li><li>2 drawers for tools (with version for tools)</li><li>4 x Build Plates holder</li><li>Rubber Gasket for the glass</li><li>Customised Panels</li><li>access to original buttons</li><li>No screws required</li><li>CAD files available (F3D,STEP)</li></ul><figure class="table"><table><tbody><tr><td>&nbsp;<figure class="image image_resized" style="width: 92.39%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_18d41f48cf37f.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_a237ff37d0da5.png"></figure></td></tr></tbody></table></figure><h2> </h2><h2>How to print and where to begin?</h2>I must admit, if you&#39;re in search of a quick two-hour print and you&#39;re finished, this may not be the right place for it. To initiate and successfully complete this project, a considerable amount of filament and time investment is necessary. Here are the essential resources you&#39;ll be required to invest:<figure class="table" style="width: 70.13%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td>Printing Time</td><td>70~85 print hours - including color switching!</td></tr><tr><td>Printer</td><td>X1 Carbon, P1S, P1P, X1 or Other + AMS (Optional).</td></tr><tr><td>Filament</td><td><ul><li>2 kg - PLA/PETG Main filament color (GREY)</li><li>0.5 kg - PLA/PETG Secondary filament color (GREEN)</li><li>14 g - PLA/PETG Black filament for text (BLACK)</li><li>34 g - TPU flexible filament for your Gasket (BLACK)</li></ul>* Feel free to choose your own colors.</td></tr><tr><td colspan="2"><figure class="image image_resized" style="width: 98.07%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_77b29f1dbec36.jpg"></figure></td></tr></tbody></table></figure>I tried to keep the project in as few parts as possible and minimize the use of screws and glue. I&#39;ve also included three images that show all the parts and file names to help you easily know what to print and what to remove. Click on the pictures to enlarge.<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_5539d72c1e42.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_1698b67225759.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_34f66213cbfb2.jpg"></figure></td></tr></tbody></table></figure>&nbsp;&nbsp;<h2>Printing settings</h2>Under each file name, I&#39;ve added a recommendation on how to print that component. Please note that these are just suggestions, and you can choose the filament type, infill percentage, and wall count according to your preferences.Additionally, I&#39;ve attached an image below that illustrates how to orient each component on the print bed for optimal results (click to enlarge):<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_c8a5b6a960393.jpg"></figure>Please note that you will find in also wonderful print profiles from the community too :)<h2> </h2><h2>Assembly instructions</h2>I think the best way to demonstrate the assembly is through a video. Therefore, I&#39;ve created a short animation video for you that illustrates the assembly process and the sequence of the project&#39;s components. Enjoy:<h3> </h3><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f7b5fb7649351.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_0604a5a98bf6d.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_4edcdff3d535e.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f3764fb52c104.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_7b9abe53ec9f3.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_611a02308f5c5.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_d8d2275f63acd.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f59c54b41a2bd.png"></figure></td></tr></tbody></table></figure><h3>Buttons assembly:</h3>Please print x2 Button insert.stl files and assemble as the photo below:<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-09-29_89172a00d321c.jpg">&nbsp;<h2>Recommended Remix:</h2><ul><li><a target="_blank" href="https://makerworld.com/en/models/27690#profileId-24067" rel="nofollow noopener">Front Panels for P1P remix</a></li><li><a target="_blank" href="https://makerworld.com/en/models/28098#profileId-24385" rel="nofollow noopener">new Drawers with Clean look and version with Text</a></li><li><a target="_blank" href="https://makerworld.com/en/models/28948" rel="nofollow noopener">Spool Holder add on on the rear</a></li><li><a target="_blank" href="https://makerworld.com/en/models/29315" rel="nofollow noopener">Honeycomb panels for the sides</a></li></ul><h2>Links:</h2><ul><li><a target="_blank" href="https://s.click.aliexpress.com/e/_Dk1tOEL" rel="nofollow noopener">COB 5mm Dimmable LED strip</a> suitable to the project. please make sure to choose: “white” and “Strip-USB Button” options.  </li></ul><h2>Colors ideas:</h2><figure class="image image_resized" style="width: 59.65%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_5f2218eae1ea7.jpg"></figure><h2>How to download CAD (f3d,Step) files: <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_16ad19d8f61ba.jpg"></h2><h2> </h2><h2>Selected User makes:</h2><figure class="table" style="width: 90.79%"><table class="ck-table-resized" style="border: 1px solid hsl(0, 0%, 100%)"><colgroup><col><col><col></colgroup><tbody><tr><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_3aaa07d5a3c1e.png"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 86.34%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_f5f9b0b8d1086.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_ee05726581f83.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_8efeadcf004be.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 79.61%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_c0866329e4121.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 92.92%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_f106d497bd601.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)" colspan="3"><figure class="image image_resized" style="width: 94.67%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_d8fbe88a9ea.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)" colspan="3"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_0d0d9ff1ec084.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr></tbody></table></figure>&nbsp;<figure class="table"><table><tbody><tr><td style="background-color: hsl(0, 0%, 60%)"><h2>Changelog</h2></td></tr><tr><td><ul><li>19/9/23 - published first prototype. not meant yet to print.</li><li>19/9/23 - uploaded v1.1 with angled glass holder and fixed Size drawer, stronger rear part.</li><li>23/09/23 - Left/Right/Rear Panel edges optimization for better surface finish.</li><li>24/9/23 - Huge update v1.2 !<ul><li>Extreme optimization to main parts, now it&#39;s 6 parts but much less support and faster to print.</li><li>Added wire channel for the LED&#39;s wires.</li><li>Added lock pins to TPU gasket.</li><li>new secure method to front and rear parts in addition to the dovetails.</li><li>Optimization to all decorative panels.</li><li>2 x Button frame cover with logo for P1P and P1S.</li><li>increased glass holder degrease to prevent movements.</li><li>Deeper AMS leg&#39;s socket, securing the AMS in it&#39;s place.</li><li>Added special drawer with accessories. it has a place for the H1.0-H2.0 HEX keys, 2 x Hotends, 5 cutters, 4 x wipers, screws, glue and needle.</li></ul></li><li>25/09/23 - updated new version 1.3 with measurements fix.</li><li>29/9/23 - added 2 remixes: clean front drawer, drawers with text, Dash front parts for P1P.</li><li>29/9/23 - added Button insert.stl + button images assembly.</li><li>30/9/23 - remix section update! spool holder, honeycomb panels added.</li><li>4/10/23 - New optimized slicing profile! faster, less filament, better support!</li><li>02/03/24 - added more support to side model.</li><li>04/04/24 - changed print profile for wider base.</li><li>22/05/24 - optimized structure for vibrations.</li><li>31/05/24 - changed Internal structure to be more rigid.</li><li>29/06/24 - added BOM items  </li></ul></td></tr></tbody></table></figure>

BLV - AMS Riser for X1C / P1P / P1S V3.1 Final

AMS RISER

Catherine Doucet

<h3>Filament Purge/Poop Shadow Box</h3>UPDATE 1 : New faceplates added (Butterfly, Mushroom, Dolphins, Palm Tree, Peacock, Mouse Ears, Weiner Dog)UPDATE 2 : <ul><li>New faceplates added (Dragon Ball Z, Motorcycle, Cat, Ghost, Magic Lamp, Ice Cream, Mandalorian)</li><li>Fusion 360 Design file, Print Profiles and RAW Files have all been modified to include a lip at the bottom of the box to help hold the faceplate and window. The Window_Thickness was not references in the sketch, it is now fixed and changing this parameter will modify the design.</li></ul>&nbsp;&nbsp;We all know multi-color printing with the Bambu printers produces a lot of waste, mostly in the form of filament poop. My design doesn&#39;t help reduce the waste produced but it does help with giving it a purpose. This shadow box with customizable size and face plates is a great way to display the colorful waste in a fun manner. It can be a great way to add a pop of color to your living room, your office or even your kid&#39;s room.&nbsp;For this design, you will need to purchase some small acrylic sheets such as these ones from <a target="_blank" href="https://www.amazon.ca/dp/B088LLCJBK?ref=ppx_yo2ov_dt_b_product_details&amp;th=1" rel="nofollow noopener">Amazon CA</a> or <a target="_blank" href="https://www.amazon.com/SimbaLux-Plexiglass-Transparent-Protective-Replacement/dp/B088LLCJBK/ref=sr_1_4?crid=22ER4N5UCMCUJ&amp;dib=eyJ2IjoiMSJ9.cdhOOX0nvijtRW_PjncZZO9dR0XJxrsNqs-evrSjIDHN_SiO4qta_my5eOF0M_pMk3Z97aFjZ6oJu9tWmE2HeKJ_8B9hq6tdb615aZra4T52WZ84XVRqd-o6pW_ElRcEcjQYYtgLlSl9tf6GsgJVYudqCmGdCqLdB3349Qk_ybm7FkDFap3QYkyu4-dkjX4CO7k12Vrb8RACnrhOzCy4q-zIef3bU9Y0gBr9gyP7UPw.ZNML7UenX66MZWG6reYkhF12HsjFSHDd9xPRDr88l_c&amp;dib_tag=se&amp;keywords=simbalux%2Bacrylic%2Bsheet%2Bclear%2Bcast%2Bplexiglass%2B5x7&amp;qid=1711399238&amp;sprefix=simbalux%2Bacrylic%2Bsheet%2Bclear%2Bcast%2Bplexiglass%2B5x7%2Caps%2C115&amp;sr=8-4&amp;th=1" rel="nofollow noopener">Amazon US</a>. Do not worry if you can&#39;t find these exact ones, as I have also included the Fusion 360 design file that is parametrized for you to customize the shadow box for yourself.&nbsp;As of right now, the face plates available in the print profile and RAW files are the following :*Note that I will be taking requests for face plates of the provided dimensions, but you can also customize one in your slicer or in Fusion 360<ul><li>Vertical Blank</li><li>Vertical Bambu Logo</li><li>Vertical Brick man</li><li>Vertical Sunflower</li><li>Horizontal Blank</li><li>Horizontal Excavator</li><li>Horizontal Golden Ratio</li><li>Horizontal Star Wars</li><li>Horizontal Brick Logo</li></ul>Assembly instructions :<ol><li>Slide the acrylic sheet and the face plate into the grove at the front of the box. I suggest having the face plate be the outermost item, that way you will be able to easily change it without making a mess</li><li>Add in the filament poop using the optional feeder funnel</li><li>Slide the cover on and you&#39;re done, it is an intentional tight fit so nothing comes out.<ol><li>An optional looser cover is provided in both of the boxes print profiles</li><li>For a 100% secure cover, use a bit of glue</li></ol></li></ol>&nbsp;How to make a custom face plate in the slicer :<ol><li>Right-Click on the blank face plate of your choice</li><li>Click on ‘’add negative part&#39;&#39; then select the ‘’load&#39;&#39; option</li><li>Select your intended file, scale it up or down and place it where you want it to be</li><li>When you slice the file, it should then cut out the loaded file from the blank face plate</li></ol>&nbsp;How to modify the Fusion 360 design fileHere are the parameters that you can change in the Fusion 360 file :<ul><li>Tolerance is used around the sliding cover and between the face plate/acrylic sheet and the walls of the shadow box. It is currently set as 0,2 mm and it worked perfectly for me.</li><li>Window_Thickness is for the thickness of the acrylic sheet. This will not affect the thickness of the face plate (1 mm)</li><li>Window_Horizontal is for the horizontal measurement of the acrylic sheet and face plate. Add the exact value without tolerance in mind.</li><li>Window_Vertical is for the vertical measurement of the acrylic sheet and face plate. Add the exact value without tolerance in mind.</li><li>Box_Depth is to adjust the depth of the shadow box as in making it more slim or thicker. This is the total outside measurement, I don&#39;t recommend you go under 30mm.</li></ul>To change these parameters, you will need to :<ol><li>in the ‘’Solid&#39;&#39; menu, expand the ‘’modify&#39;&#39; tab and select ‘’Change Parameters&#39;&#39;</li><li>You will then have this new window open up, simply change the parameter of your choice in the ‘’Expression&#39;&#39; column</li></ol><figure class="image image_resized" style="width: 66.51%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000408882/design/2024-04-01_52deddc4daa6d.png"></figure>&nbsp;Commercial License available on my <a target="_blank" href="https://cults3d.com/en/3d-model/art/filament-purge-poop-shadow-box" rel="nofollow noopener">Cults3D page</a>

Filament Purge/Poop Shadow Box (Waste filament)

Filament Poop Art

Ando

Hi ALLThis is the first stackable box I created. Hope you will like it.Each box can be close by 2 latches. Each 2 boxes can be “stacked” with 4 connectors. Please see photos.&nbsp;Use less than 400 g of ABS plastic.&nbsp;Size is 8x8x4 in (internal) or 200x200x100mm&nbsp;You will need 4pcs #8-32x1-1/2in Machine Screws (from Home Depot - 659441)4pcs #8-32 Machine Screw Nuts (from Home Depot - 254215)I also use 4pcs #8 Flat washers to hold latch straight, but it is not mandatory (from Home Depot - 427560)

First Stackable XL toolbox 8x8x4in 200x200x100mm

Toolbox

Kamill47

EDIT:I designed the second version where you can use a hex head M6 bolt as a handle, Print: Pin for m6 bolt, m6 head, and insert, it screws nicely together. It doesn&#39;t add any strength to the lock, it just looks nicer :) &nbsp;&nbsp;I needed a simple lock just to keep the doors closed, so why not design it and print one, (actually I needed 3 ;))This lock is fully 3D printed and doesn&#39;t need gluing or other parts (you need screws to mount it)I printed it using these settings:&nbsp;0.4mm nozzle0.16mm layer height3 walls35% cubic infill&nbsp;no need for supportall models are in the right orientation to print.Just put in your slicer and print :)hope you like it.&nbsp;I put 2 of those on my shed and the hold very nice, check test video: <figure class="media"><div data-oembed-url="https://www.youtube.com/shorts/Sl8IZZSFVR8"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=Sl8IZZSFVR8"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/Sl8IZZSFVR8" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>&nbsp;

Door latch lock fully 3d printed

Door Latch

RealNationPrint

My first Super Mario Planter Design.<ul><li>Scaleable</li><li>easy to print</li><li>No AMS Needed</li></ul>For my other designs visit:<a target="_blank" href="https://makerworld.com/en/@RealNationPrint" rel="nofollow noopener">https://makerworld.com/en/@RealNationPrint</a>  I&#39;d appreciate a like/follow/comment/Printrate and further support! Thank you Wanna buy me a coffee for my good work? <a target="_blank" href="https://www.paypal.me/Realmascha" rel="nofollow noopener">https://www.paypal.me/Realmascha</a>

Super Mario Block Planter / Box - No AMS - 10x10cm

Mario Bros

三十而肥 - 30 3D Print

<a target="_blank" href="https://www.youtube.com/watch?v=UcAgvkfRk-M" rel="nofollow noopener">If you cannot see the video, please click here</a><figure class="media"><oembed url="https://www.youtube.com/watch?v=UcAgvkfRk-M"></oembed></figure>The design of this wireless charger comes from the Airforce Command Headquarters in the classic game &#34;Command &amp; Conquer: Red Alert 2&#34;. It perfectly recreates the animated effects from the game, including radar rotating and lights flashing. The overall dimensions are 14cm x 10cm x 12cm. It features two power modes: low power mode ranging from 0 to 5 watts and high power mode ranging from 5 to 15 watts. If you intend to use the high power mode, it&#39;s recommended to use temperature-resistant filament for printing, such as ABS or ASA.&nbsp;This model is fully compatible with the Wireless Charger Kit-K012 released by Bambu Lab. Additionally, you only need to prepare glue and a screwdriver to complete the installation.&nbsp;Hardware Kit: <a target="_blank" href="https://shareasale.com/r.cfm?b=2282157&amp;u=4090353&amp;m=138211&amp;urllink=store%2Ebambulab%2Ecom%2Fproducts%2Fwireless%2Dcharger%2Dkit%2Dk012&amp;afftrack=" rel="nofollow noopener">Wireless Charger Kit</a>&nbsp;Disclaimer:This model is part of the Creator Program, When you purchase the Wireless ChargerKit K012 through the links below, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to public.)&nbsp;If you don&#39;t have AMS, you can also complete the printing of multi-color parts according to the following steps:&nbsp;Step 1.Set Z hop when retract in the filament settings to 0.4 or above.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000018389/design/2024-03-16_3c9f964c89d86.png">Step 2.Place the multi-colored side facing down, at the edge of the hotbed, avoiding covering the center of the hotbed, then split to objects.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000018389/design/2024-03-16_ec72e6b6b97ec.png">Step 3.By deselecting the printable option, retain only one color and print.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000018389/design/2024-03-16_5cc93eb6a8f56.png">Step 4.After the printing is completed, keep the hotbed still and replace it with another filament. Use the same method to print another color. Be careful to cancel the Bed Leveling this time.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000018389/design/2024-03-16_ec8e1811ef86.png">Step 5.Repeat the above steps until the printing is complete.&nbsp;Enjoy printing.&nbsp;

Airforce Command Headquarters Wireless Charger

Charger Red Alert Helipad

9percent

Can be used for more than just avocados of course."Chair" needs support.=======================Hanger has been updated to version 2.The components have been divided to improve stability during printing.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/431972/2023-12-17_74ea36305e1c6.jpg"> ======================= 2023/12/30 “hanger” parts of Version2__.3mf file has been changed. (size of the parts changed from 100% to 120%) I found a my mistake in the 3mf. The size of the "hanger" part was small and the "chair" part will touch the ground.

Hanging chair for avocado

Avocado Chair

nyx_nk

FIFA Worls Cup Trophy replica&nbsp;PLA Silk is suggested&nbsp;Single piece: no assembly needed

FIFA World Cup Trophy - SINGLE PIECE / SUPPORTLESS / VARIOUS SIZES

World Cup Thropy

Easter Benchy

Worstest Nongineer

Full Install + Setup Guide:<figure class="media"><div data-oembed-url="https://youtu.be/dRUDWmKcU10"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/dRUDWmKcU10" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp; Amazon link to Tapo C110: https://www.amazon.com/dp/B09YL5G1Y8?psc=1&ref=ppx_yo2ov_dt_b_product_details&nbsp;Camera mount for the TP-Link Tapo C110 to be mounted on the LCD screen of the P1S/P. Camera provides an easy and nice looking way to check in on your printer, a much needed upgrade from the stock 720P 0.5FPS camera that comes with the printers. &nbsp;Has wire guide for the wire to cleanly exit the mount to either the left or right. I don't know who'd go to the right, but the option is there. Default file has an aesthetic rim for those with an AMS, but a flat file provided for those who want a simple print or don't want to do a layer change. &nbsp;.Step files provided.&nbsp;21g of filament1 Hour on P1S Standard Speed&nbsp;Printing Suggestions: Print with .20mm layer height or lower. Slicer, by default, will place a bridge along the wire guide which may not come out right. &nbsp;Steal it, slap your logo on it, sell it. Hard for me to care. Just, if you can, link back to me. &nbsp;&nbsp;If you're using the Xtouch as well, FrancescoM has made a remix that lets you incorporate both!https://makerworld.com/en/models/61962#profileId-64422

TP-Link Tapo C110 Camera LCD Mount for BambuLab P1S/P

P1P Parts

Brithawkes

Hi All this is my version of a poop shoot for my new P1S fits well and is work great so far.&nbsp; I have added space to put magnets on the backside if you wish but not really needed as free standing. I used the magnet which came with the printer for the scraper as was not going to use them for it.&nbsp;and added the designs on the faces to aid in keeping the side straight but also looks cool :)&nbsp;this is v1 if i find later i wish to change i will update or make a new one. also if you would like me to alter in anyway please let me know.&nbsp;all the best and happy printing.

Purge Bin ( Poop bucket ) shoot P1S X1 X1C P1P

Poop Chute

kurt_rath

"Pork Rub" Magnet - word play on “You know what” Hub :)12mmx2mm magnet on Amazon, you can buy a pack of 100 for less than $10.&nbsp;

Pork Rub BBQ Magnet - 12x2mm Magnets

Funny

salsaia

The chick is trying to break through the egg! But it stopped when it's legs popped out and thought, "this is fine."This is a quick model I made of chicken legs breaking through its shell. I printed the model with supports underneath the egg. It also scales larger pretty well.Let me know what you think and let's see your makes!

Chicken Egg with Legs

Chicken 

Arabidopsis

Remix of CreativeRenditions's Christmas Gift Box. The lid can be opened now! Hope you can surprise someone with a little gift~

Gift Box with lid

Gift Box

p-stov

This is a puzzle box that I found fun to use at Christmas time. &nbsp;First, the key does nothing to open the box. It is only a decoy and has a pretty simple maze to pass through. To open the box, set it on a flat surface and spin it with enough force to cause the pins to move to the cavities in the bottom section. &nbsp;Modifications:I have included STL and STEP files so you can modify it as needed. Please link your modifications back to mine so I can see the interesting variations you design. &nbsp;I hope you, your family, and friends have fun with this puzzle box. &nbsp;General Details:<ul><li>Insert 4 pins in the cavities of the bottom part. I recommend doing this on a flat and stationary surface. </li><li>Insert the top part into the bottom part. There is a chamfer to help push pins back into the bottom cavities. </li><li>Lay the key in the indention on top. </li></ul>Printing Details:<ul><li>Solid Fill Plate: 0.20mm Strength setting Sparse infill: 100% rectilinear Enable support: Yes Type: Tree(auto) Style: Tree slim (advanced mode) On build plate only: Yes</li><li>Bottom Plate: 0.20mm Standard setting Enable support: Yes Type: Tree(auto) Style: Tree slim (advanced mode) On build plate only: no</li><li>Top Plate: 0.20mm Standard setting Enable support: Yes Type: Tree(auto) Style: Tree slim (advanced mode) On build plate only: Yes</li></ul>Notes: <ul><li>The top plate setting leaves some stringing in the key maze. I was able to carefully run a key through it a few times and clear it out. I did try to use support and it was next to impossible to remove. </li><li>I printed an extra key (in case of impatience) and 4 extra pins (because they are easily misplaced) and gave them to the gift recipient. </li></ul>&nbsp;&nbsp;

Giftbox Puzzle

Puzzle 

Squish3D

Do NOT adjust the thickness (Z) in your slicer!! The layers will not come out right. You CAN adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness.&nbsp;These were my settings and colors for my print that you see in the picture. Your results may vary depending on the filament you use and if you have your own HueForge profile saved with different settings.&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Nozzle: 0.4&nbsp;Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Brown Transmission Distance: 2 PLA+ Sunlu Gold Transmission Distance: 5 PLA Sunlu White Transmission Distance: 6&nbsp;Swap Instructions: Start with Black At layer #26 (2.16mm) swap to Brown At layer #30 (2.48mm) swap to Gold At layer #34 (2.8mm) swap to White for the rest.

Eagle - HueForge

2D ART

KKSP

Two-piece towel rack.

Towel Rack

Hook

jajaum3d

🌟 Support My Work &amp; Unlock Exclusive Benefits!🌟 Become a patron on <a target="_blank" href="https://www.printables.com/@jajaum3d#join:64" rel="nofollow noopener">Printables.com</a> and gain access to early releases, commercial licenses, and more.  See all my designs on cults: <a target="_blank" href="https://cults3d.com/en/users/jajaum3d/creations" rel="nofollow noopener">https://cults3d.com/en/users/jajaum3d/creations</a> All my designs are protected by Copyright Law. Purchasing does not grant the right to sell any digital file or printed model of my designs without explicit consent. Please respect the hard work of 3D artists by never sharing or selling digital files.  <figure class="table" style="width:98.41%;"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td colspan="3"><h3>Support and Access Exclusive Designs</h3>This model is available for free, but you can choose to make a small donation and receive one of these exclusive variants. Alternatively, you can join the <a target="_blank" href="https://www.printables.com/@jajaum3d#join:64" rel="nofollow noopener">Printables Club</a> to access all these models and many more.</td></tr><tr><td><a target="_blank" href="https://cults3d.com/en/3d-model/gadget/iron-suit-edition-mobile-exo-suit" rel="nofollow noopener">Iron Suit Edition</a></td><td><a target="_blank" href="https://cults3d.com/en/3d-model/gadget/captain-s-legacy-edition-mobile-exo-suit" rel="nofollow noopener">Captain&#39;s Legacy Edition</a></td><td><a target="_blank" href="https://cults3d.com/en/creations/battle-mech-edition-mobile-exo-suit" rel="nofollow noopener">Battle Mech Edition</a></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000049016/design/2024-04-18_bc423fbf322cf.gif"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000049016/design/2024-04-18_c737f9d76a7dd.gif"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000049016/design/2024-04-18_7509d2a60bb71.gif"></figure></td></tr></tbody></table></figure><h3> Introducing the Mobile Exo-Suit: Your Phone&#39;s Ultimate Armor</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000049016/design/2023-10-24_ateqzu20qo45.gif"></figure>This unique design combines functionality and style, resembling an exoskeleton or suit of armor for your device.The Mobile Exo-Suit is ingeniously designed to adapt to different phone sizes, ranging from 70mm to 95mm, ensuring a perfect fit for various smartphones. Once placed on the stand, your phone gains arms and legs, giving it a playful and dynamic appearance. Not only that, but the hands of the exoskeleton conveniently hold your charging cable when not in use, keeping everything organized.The core structure of the Mobile Exo-Suit serves as the base, providing stability and support, while an additional armor layer enhances its aesthetic appeal, allowing you to personalize your device in style. The Mobile Exo-Suit adds a touch of elegance to your mobile experience.Experience the ultimate combination of functionality and style with the Mobile Exo-Suit - a worthy place for your beloved device.No paint, no supports and no glue needed.<h3>Printing Instructions</h3>Files in STL format to print without any support or brim and already in the best orientation. Recommended layer height: 0.2mm.<h4>Files to print organized by color:</h4><a target="_blank" href="https://www.prusa3d.com/product/prusament-pla-viva-la-bronze-blend-970g/" rel="nofollow noopener">Prusament PLA Blend Viva La Bronze</a><ul><li>Body-v2.stl</li><li>Arms-v2.stl</li><li>Legs-v2.stl</li></ul><a target="_blank" href="https://www.prusa3d.com/product/prusament-pla-prusa-galaxy-black-1kg/" rel="nofollow noopener">Prusament PLA Prusa Galaxy Black</a><ul><li>Armor.stl</li></ul>Individual files and a tolerance test also included<h4>Tips</h4><ul><li>The body needs good bridges and a good first layer to print well.</li><li>Print the legs for strength, increase walls and infill.</li><li>Put the armor before joining the arms and legs to the body, don&#39;t mix left and right parts.</li><li>On the forearm armor, put the elbow first <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000049016/design/2023-10-24_6b4i1thveb1j.gif"></li></ul><h4>Bed adhesion problems?</h4><ul><li>Disable the Elephant foot compensation setting it to 0, as the model already has it.</li><li>To put brim on everything is really annoying to remove later. This technique allows you to put it only on critical parts and in an easy way to remove later:<ul><li>Right click on the model and select “Add part&gt;cilinder”</li><li>Scale it to 0.2mm heigth, edit only the height and click on “drop to bed” to make it flat in the bed</li><li>Now drag it to under the hand for example and you&#39;re done. Repeat the process to any pat that you want an extra adhesion. You can use and scale shapes as your needs.</li></ul></li></ul><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000049016/design/2023-10-24_05osbsvfx5ow.jpg"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000049016/design/2023-10-24_kb21fikz1bow.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000049016/design/2023-10-24_wlztzmtn12tj.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000049016/design/2023-10-24_1hkki7rel13j.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000049016/design/2023-10-24_tjx12dzxbo1p.jpg"></figure>

Mobile Exo-Suit

iPhone 

TfourJ

Vertical stand for PS5 Slim Compatibility:<ul><li>PS5 Slim Digital Edition (also works with: <a target="_blank" href="https://makerworld.com/en/models/106069" rel="nofollow noopener">https://makerworld.com/en/models/106069</a>)</li><li>PS5 Slim Disc Edition</li></ul>Required hardware: M3 x 14 screw (Tested)M3 x 12 screw (Not tested, but should work)&nbsp;WANT TO SELL MY MODEL? For licensing inquiries, please contact me via email at: licensing@tfourj3d.com

Playstation 5 Slim Vertical Stand (Compatible with Disc Edition)

PS5 Stand

Jorge Rui

<h3>Introduction</h3><blockquote>3mf files are for use only on bambu studio and Orca Slicer - Latest version. Step files are available for the most excellent Prusa Slicer and others.</blockquote>&nbsp;This is my idea of a keychain. The tags are large, and the colors are bright, so maybe it's not so easy to miss. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_xyhck86v113n.jpg"></figure>This keychain is an elegant, highly customizable, and practical solution. Who has ever used a traditional keychain closet, knows that it is not always easy to put the keys there.<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_gh7m00henasp.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_et9ho9yhlkf7.jpg"></figure></td></tr></tbody></table></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_kktrixy3yq5q.jpg"></figure>It can be used with the tags, but also with simply the key (as long as they have some iron on it). It works with the magic and invisible magnetic force, if the keys are from brass to aluminum, the solution is to use one of the available tags. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_73tz8bljc3ut.jpg"></figure><h4>Smart</h4>For those who are in the home rental business, or have a home with home automation, I also added the possibility to add an <a target="_blank" href="https://en.wikipedia.org/wiki/Radio-frequency_identification" rel="nofollow noopener">NFC</a> Tag to each of the keychain docks. This way, you can give directions to your guest or automate something every time you bring your <a target="_blank" href="https://en.wikipedia.org/wiki/Radio-frequency_identification" rel="nofollow noopener">NFC Tag </a>reader close to the dock. If you don't find this interesting, just don't use the NFC Tag ;)ChallengeI leave here a challenge to those who are more comfortable with electronics, namely using and programming the <a target="_blank" href="https://en.wikipedia.org/wiki/ESP32" rel="nofollow noopener">ESP32</a>. If anyone is interested in collaborating in order to put a microcontroller in the dock, please contact me. The idea that by putting the key on the keychain and start an action is interesting. (this, of course, without using the mobile phone). NFC Tag was the simplest way I found to enable this kind of interaction, but you always need a mobile phone nearby… Well, it's not bad, but an ESP32 will be better, but then we have the battery problem… ;)<h4>How it works</h4><ol><li>Simply hold the tag or key close to the dock and the magical magnetic force will do the rest. </li><li>If you are already in the future, whenever you think it is necessary, you can bring your phone close to the dock and trigger a set of actions. I know that with iOS this is very easy through the automations in the Shortcuts app, and I'm sure that on Android it won't be difficult either. Regardless of the system and in a universal solution, <a target="_blank" href="https://www.home-assistant.io/" rel="nofollow noopener">Homeassistant </a>works great with ID tags.</li></ol>But enough about automation, that was something I decided to add and that wasn't the reason I made this keychain. <h4>Available variations</h4><ul><li>Colors for ID the dock and the tags, choose any colors you like.</li><li>3D printable labels on the dock (Garage, House, Office and Mailbox). Some more could be available for members. This you have to download here, they can be remixed, that way you can add your text.</li><li>Version to add labels as stickers.</li><li>A dock version to hang.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_7j5oec22wkpa.jpg"></figure><h3>Print instructions</h3>This project is designed to make printing easy, but there are a few things you should take into consideration.The tag has a neodymium magnet embedded in it. Therefore, it will be necessary to program a pause in the last layer where the pocket where the magnet is inserted is closed.<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_1p5q6bf8f69w.jpg"></figure>These files can be remixed, so the copyrights of does is different from this one, the only way I know to make this is by creating a new project.You can download here:<ul><li><a target="_blank" href="https://makerworld.com/en/models/38287" rel="nofollow noopener">Tags and Labels for the Keychain</a></li></ul><h3> </h3><h3>Assembly instructions</h3><ol><li>Print the parts.</li><li><a target="_blank" href="https://amzn.to/46irZ3A" rel="nofollow noopener">Get some neodymium magnets </a>and, if you want, some <a target="_blank" href="https://amzn.to/3rKJif0" rel="nofollow noopener">NFC Stickers</a>.</li><li>Assemble the dock (this example is good for all version.<ol><li>Force the magnet on its socket (can help push it against a piece of wood, don't use metal, the magnet will break).</li></ol></li><li>The name label on the top will press fit.</li><li>For better adhesion of the parts, you can use double-sided adhesive tape. <ol><li>Something like <a target="_blank" href="https://amzn.to/3rTK3Cp" rel="nofollow noopener">this</a></li></ol></li><li>If needed, you can glue it all.</li></ol><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_r26u97h2ahzx.jpg"></figure> 6. If you go for the rail fixing, please choose one of the configurations available on the 3mf file. Remember that you can use the cut function on the slicer. <figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=nyevb4B_NB8"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/nyevb4B_NB8" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><h3>Material</h3><ul><li><a target="_blank" href="https://amzn.to/46irZ3A" rel="nofollow noopener">2x neodymium magnets of 10x3mm</a> (one for the dock, other for the Tag)</li><li><a target="_blank" href="https://amzn.to/3rKJif0" rel="nofollow noopener">1x NFC sticker Tags</a> (if you plan to use them)</li><li>For the rail fixation, you will need bolts of about 4mm in diameter. </li><li>For a small help, use this affiliate link to buy filament, it will cost you the same. Thanks ! <ul><li><a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&u=4026304&m=138211&urllink=&afftrack=" rel="nofollow noopener">Filaments used on this project</a></li></ul></li></ul><h4> </h4><h4>Development</h4>I think it might be interesting to show what's behind a finished product, so from this project onwards I can include some information regarding product development. Give some feedback if you find it interesting or if you find this irrelevant.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_nk7t1q5kb3pq.jpeg"></figure><h3>Change log:</h3><ul><li>(12-10-2023) - Added blank labels; download file: “Name_blank.step” and “Tag_blank.step”.</li></ul><figure class="table" style="width:97.1%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image image_resized" style="width:81.16%;"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-12_8cc3cc988b56e.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-12_d7a7c61134e7e.jpg"></figure></td></tr></tbody></table></figure><h4>Support the designer:</h4><ul><li>This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a target="_blank" href="https://www.buymeacoffee.com/designrepcom" rel="nofollow noopener">buymeacoffee </a>or <a target="_blank" href="https://www.paypal.com/donate/?business=BUM67EMDJRXSN&no_recurring=0&currency_code=EUR" rel="nofollow noopener">paypal, </a>or even better, join “My Club” here in printables.com, that will be greatly appreciated.</li></ul><a target="_blank" href="https://www.printables.com/@jorge_rui" rel="nofollow noopener">And check my other projects, maybe you find there something usefull</a>

Keychain and Tags

KeyChain

JamesThePrinter

Rotate the creme filling for satisfying clicks! As you rotate the filling, the spring arm will move from one position to the next, giving you a nice tactile feel. This model was designed to be the actual size of a Double Stuf Oreo (with extra creme for a better grip).&nbsp;&nbsp;AssemblyStart with one wafer piece upside-down. Glue the center gear into the center of the wafer. Stack the creme filling onto the wafer, ensuring that the tip of the spring is inside the gear. Glue the second wafer onto the remaining end of the center gear.&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The filaments used in the picture above are polymaker PolyTerra Charcoal PLA and Hatchbox True White

Super Clicky Oreo Spinner

Cookie

Matthew Ghost

<ul><li>Secure Valuables Storage: Safe is perfect for safeguarding your money and precious items.</li><li>No Additional Parts Required: No complicated setup! This safe doesn't need any bearings, screws, glue or additional purchased parts.</li><li>Functional Mechanical Lock: Security is key – our safe features a functional mechanical lock for an extra layer of protection.</li><li>Dimensions 140x130x140 mm: Spacious enough for your valuables, yet compact enough to fit anywhere.</li><li>Include coin slot</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/396562/2024-01-12_a4eacf6d63b6c.gif"></figure>Assembly instruction:Instructions can be found in the video below. Please follow the procedure: (<a target="_blank" href="https://www.youtube.com/shorts/WcrcSSKChjk" rel="nofollow noopener">https://www.youtube.com/shorts/WcrcSSKChjk</a>)<figure class="media"><div data-oembed-url="https://www.youtube.com/shorts/WcrcSSKChjk"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=WcrcSSKChjk"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/WcrcSSKChjk" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>A VERSION WITH CLEARANCE<ul><li>It may happen that main version will not be assembled due to small clearances. Actual clearance depends on many factors (flow, filament, printer condition)</li><li>Parts with the letter C in their name are parts that have increased clearance. These parts must be glued.</li></ul>

Safe | Vault |  Bank | Money Bank | Piggy Bank | Safe box

Vault

thatcaddad

This is the buster sword from FF7. I thought it would be fun to have holding your place in a book. This is a very quick print.

Buster Sword Book Mark FF7 Cloud Weapon

Final Fantasy

f1dude

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000378548/design/2024-06-02_4bf0c8dd36b1f.jpeg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000378548/design/2024-04-01_ee5e47fe6f32c.jpeg"></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000378548/design/2024-04-01_ca7b88bdfda8.gif"></figure><h2> </h2><h2>The filament clip reinvented!  耗材夹</h2><h2>Advantages:</h2><h3>- The CLAW clip is the fastest and easiest universal clip to use. Thanks to its clamping mechanism, it effortlessly grabs onto the support filament loop and keeps a tight grip.</h3><h3>- An innovative design that allows it to be used on completely full and empty spools.</h3><h3>-Fast and Easy to print. No supports, brims, or overhangs.</h3><h3> </h3><h2>Version 2</h2><h2>I&#39;ve modified the hole to be a square now so the chances of a hole blockage are reduced.</h2>&nbsp;<h3>Improved SLICER settings:</h3><h3>“Seam position” set to “Nearest,” so back-to-back seams do not drip and block the clip holes.</h3><h3>“Order of walls” set to &#34;outer/inner&#34; so the extruder prints other areas of the clip before printing the hole perimeter. I&#39;ve found that this setting stops the holes from being blocked by overextruded material.</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000378548/design/2024-04-08_c57869487c2fb8.jpg"></figure>&nbsp;<h2>THANKS FOR PRINTING!!!</h2>

Filament Clip

Filament Claw

NoycePrints

Meet Dum-E, the handy desk helper industrial robot. I designed it with purpose in mind as it can function as a phone stand, webcam mount (logitech c920) and a business card holder. It doesn&#39;t end there though, as I aim to develop this platform with further attachments in future. These may be recommended from others and/ or what I think might be useful. I hope you find it useful and please feel free to comment any recommendations for attachments you would like to see in future. I look forward to seeing your different uses/ prints and colour schemes. Thank you for your continued support :)&nbsp;To keep files from getting complicated, I have only included the phone stand attachment in this upload. I have placed optional attachments in a sperate upload available on my profile titled “Dum-E optional attachments”. This will be periodically updated with new wrist attachments I think may be of use or other people suggest. Printing helper<figure class="table"><table><tbody><tr><td>Part</td><td>Quantity</td><td>Infill</td><td>Supports required</td></tr><tr><td>Arm 1</td><td>1</td><td>25%</td><td>YES</td></tr><tr><td>Arm 2</td><td>1</td><td>25%</td><td>NO</td></tr><tr><td>Shoulder Joint</td><td>1</td><td>30%</td><td>YES</td></tr><tr><td>Wrist to attachment connector</td><td>1</td><td>40%+</td><td>YES</td></tr><tr><td>Turntable</td><td>1</td><td>20%</td><td>NO</td></tr></tbody></table></figure><figure class="table"><table><tbody><tr><td>Part</td><td>Quantity</td><td>Infill</td><td>Supports required</td></tr><tr><td>Base</td><td>1</td><td>20%</td><td>NO</td></tr><tr><td>Feet</td><td>1</td><td>20%</td><td>NO</td></tr><tr><td>XL motor</td><td>1</td><td>15%</td><td>NO</td></tr><tr><td>Large motor</td><td>1</td><td>15%</td><td>NO</td></tr><tr><td>Medium motor</td><td>1</td><td>15%</td><td>NO</td></tr><tr><td>Small motor</td><td>1</td><td>15%</td><td>NO</td></tr></tbody></table></figure><figure class="table"><table><tbody><tr><td>Part</td><td>QTY</td><td>Infill</td><td>Supports required</td></tr><tr><td>Phone stand backing</td><td>1</td><td>25%</td><td>NO</td></tr><tr><td>Phone stand bottom</td><td>1</td><td>25%</td><td>NO</td></tr></tbody></table></figure>Required for assembly Superglue for fake motor attachment and Nitrile cord.1mm nitrile rubber cord, 16cm should be enough for 1 complete arm. This is only required between joints if you intend on supporting the weight of a phone etc. Alternatively, if you have TPU filament you can use Fat Tony&#39;s handy TPU O-rings. They&#39;re a quick print and don&#39;t require superglue to fit. You can get them here: <a target="_blank" href="https://makerworld.com/en/models/205832#profileId-225948" rel="nofollow noopener">https://makerworld.com/en/models/205832#profileId-225948</a> Thanks again for the great alternative Tony!&nbsp;As an optional extra, I&#39;d recommend using 4x 3M 6mm Anti-slip sticky back rubber feet. They fit in recessed circles in the corners of the feet.&nbsp; Screws: A total of 13 are required for the arm plus 3 for the phone stand, listed below.M3x10mm - QTY 12 - available on the store, linked below.M3x15mm - QTY 3M5x30mm - QTY 1Foot: 4x M3x10mm countersunk.Base: 1x M3x15mm countersunk.Shoulder joint to Arm 2 rotation point: 1x M5x30mm countersunk.Turntable: 4x M3x10mm countersunk.Rotation point between Arm 1 and Arm 2: 1x M3x15mm countersunk.Arm 1 to wrist connector rotation point: 1x M3x15mm countersunk.Coupling attachment to wrist: 1x M3x10mm countersunk.3 M3x10mm screws are required for the Phone stand. Assembly tipsCut 3 lengths of Nitrile cord, 74, 55 and 30mm in length. Glue one side of each and cure into individual circles. These will be glued on one side between the 3 separate joints on the arm. Doing this will vastly improve the holding capacity of the arm as it will provide more friction between the joints, helping to prevent them from sagging under weight.The 74mm circle goes between the elbow joint and arm 2.The 55mm circle goes between the arm 1 and 2 joint.The 30mm circle goes between the arm 1 and wrist attachment connector.I have added 3 pictures as a guide at the end of the gallery.

Dum-E the handy desk buddy. Lamp, stand, holder 

Lamp

Mysstra hueforge

Portada de pelicula de John Wick creada con Hueforge&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 6Swap Instructions: Start with Black At layer #15 (1.28mm) swap to Gray At layer #18 (1.52mm) swap to Beige At layer #21 (1.76mm) swap to Jade White for the rest.

John Wick hueforge

John Wick

Eminent3D

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Red Transmission Distance: 6 PLA+ Sunlu Pure Yellow Transmission Distance: 5 PLA+ Sunlu White Transmission Distance: 5Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Red At layer #12 (1.04mm) swap to Pure Yellow At layer #15 (1.28mm) swap to White for the rest.

Halo Hueforge

Halo

aPyroDesign

Attention:  If printing this spinner, please use version V2 for easier support removal. &nbsp;&nbsp;This Infinite Slinky Animated Fidget Spinner is designed to be printed as a multicolor print using the AMS. It can also be printed as one piece.&nbsp;This fidget spinner is unlike a standard spinner. The shapes on the spinners are frames of animation. When you spin the spinner and view the spinner through a smartphone camera, the animations come to life. There are also two other ways to view the spinners. The instructions are below for the 3 different viewing methods.&nbsp;Smartphone Camera Instructions: Click <a target="_blank" href="https://spinnermation.com/pages/cell-phone-method" rel="nofollow noopener">HERE</a>&nbsp;Strobe Light App Instructions: Click <a target="_blank" href="https://spinnermation.com/pages/strobe-method" rel="nofollow noopener">HERE</a>&nbsp;Handheld viewer: Click <a target="_blank" href="https://spinnermation.com/pages/handheld-spinner-viewer" rel="nofollow noopener">HERE</a>&nbsp;&nbsp;GuidesEasy assembly guide and easy support removal Videos: Click <a target="_blank" href="https://drive.google.com/drive/folders/1zjWD1vB6mJ9Tk475IS7QAs6kHIoJ6YSH?usp=drive_link" rel="nofollow noopener">HERE</a>&nbsp;&nbsp;You will need an r188 bearing for the spinner.Recommended bearings from Amazon: Click <a target="_blank" href="https://www.amazon.com/dp/B095GTJC1R?linkCode=ssc&amp;tag=onamztravi04a-20&amp;creativeASIN=B095GTJC1R&amp;asc_item-id=amzn1.ideas.1JB9SWU6KEPUY&amp;ref_=aip_sf_list_spv_ons_mixed_d_asin" rel="nofollow noopener">HERE</a>&nbsp;Filaments used in this project.&nbsp;Black PLA Basic: Click <a target="_blank" href="https://us.store.bambulab.com/products/pla-basic-filament?variant=41078274654344" rel="nofollow noopener">HERE</a>&nbsp;Galaxy purple for the stairs: Click <a target="_blank" href="https://shrsl.com/4hplx" rel="nofollow noopener">HERE</a>&nbsp;Silver Silk for Slinkies: Click <a target="_blank" href="https://shrsl.com/4hpm6" rel="nofollow noopener">HERE</a>&nbsp;All links are Affiliate links&nbsp;&nbsp;Files included:&nbsp;3MF file that is ready for AMS printing.&nbsp;Top and Bottom Cap files.&nbsp;Bearing Top Cap. This part is to lock in the bearing.&nbsp;Bearing top tool. This will make it easier to lock on the bearing top cap.&nbsp;Solid file for single extruders.&nbsp;&nbsp;Interested in selling my spinners? Check out my Patreon for more info. Click <a target="_blank" href="https://www.patreon.com/APD" rel="nofollow noopener">HERE</a>

Infinite Slinky Stairs Zoetrope Spinner

Fidget

Karlos

This silica dry box with honey comb pattern can fit into central hole of filament spool or anywhere inside storage box.Dimensions are - D = 51,8 mm; L = 65mm

Silica Spool Dry Box Container

Filament Spool Tool

FlorinV

Funny Toilet poster / sign.You don't necessarly need AMS to print this in two colors. Just change color one time at layer 6 (if you use 0.2mm layers, as in my profile).&nbsp;Powered by Make My Sign from MakerWorld(makerworld.com/makerlab/MakeMySign)

Funny Toilet sign

Funny Signs

Mick23

Hi, here a little model of a Benchy.It print Flat with nos supports, If the slicer says it need supports, Ignore that it need supports.&nbsp;When its printed, draw imaginaire dot lines on the benchy paint.Its between these right dotlines you need to heat with a lighter underneath, back and forth until the temperature is just above 65 degrees.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/144958/2023-10-29_84c0142564525.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/144958/2023-10-29_2c74131012b53.jpg">&nbsp;Now you can fold it over and push on it to a corner of a table or shelf.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/144958/2023-10-29_bad51dff6a066.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/144958/2023-10-29_e8499a47f1d43.jpg">&nbsp;When it is cool down, you can heat between the other imaginary dot lines.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/144958/2023-10-29_67767c001d3d4.jpg">&nbsp;And repeat the previous steps&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/144958/2023-10-29_63166aad2147b.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/144958/2023-10-29_afd3c56859e46.jpg">&nbsp;If you have any problem , let me know&nbsp;Look also my cube paint https://makerworld.com/nl/models/55104#profileId-56614&nbsp;&nbsp;&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/144958/2023-11-01_8492330af006.jpg">And please if you like it , share it and print it!!!! And show me your pictures. and rate the print profile please Like it if you want and follow me for other items. Comments welcome&nbsp;I added also a print profile in mirror mode if you want

Benchy paint No support

Benchi

blecheimer

These are two simple bezels for the Bambu Lab P1P / P1S screen. Choose what you prefer. They will be pressed on the screen from the front and clip to the screen on the backside. Yes, it is a tight fit - if it is too tight for you then you can scale the model with the slicer in z-direction by +0.1 or +0.2% and print again.&nbsp;Disclaimer: This work by blecheimer is licensed under <a target="_blank" href="http://creativecommons.org/licenses/by-nc-sa/4.0/?ref=chooser-v1" rel="nofollow noopener">CC BY-NC-SA 4.0</a> You are not allowed to copy this model to other 3D printing websites without my permission.

Minimalist Screen Bezel for Bambu Lab P1P / P1S 

Printer

Think3D

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Start with Black At layer #13 (1.12mm) swap to Yellow for the rest.&nbsp;___________________________________________________________________________________If you like my work, please consider a small donation :) Thank you very much :*<a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=RWRXKCAEM86K8" rel="nofollow noopener">https://www.paypal.com/donate/?hosted_button_id=RWRXKCAEM86K8</a>&nbsp;

Pac-Man - HueForge

Games

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Start with Black At layer #12 (1.04mm) swap to Orange At layer #18 (1.52mm) swap to Yellow At layer #24 (2mm) swap to White for the rest.&nbsp;___________________________________________________________________________________If you like my work, please consider a small donation :) Thank you very much :*<a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=RWRXKCAEM86K8" rel="nofollow noopener">https://www.paypal.com/donate/?hosted_button_id=RWRXKCAEM86K8</a>&nbsp;

Pika - HueForge

Pokémon 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Start with Black At layer #11 (0.96mm) swap to Gray At layer #19 (1.6mm) swap to White for the rest.&nbsp;___________________________________________________________________________________If you like my work, please consider a small donation :) Thank you very much :*<a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=RWRXKCAEM86K8" rel="nofollow noopener">https://www.paypal.com/donate/?hosted_button_id=RWRXKCAEM86K8</a>&nbsp;

Millennium Falcon - HueForge

Star Wars

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.Start with Black At layer #8 (0.72mm) swap to Blue At layer #11 (0.96mm) swap to OrangeAt layer #17 (1.44mm) swap to White for the rest.&nbsp;&nbsp;170x170 Version:Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Start with Black At layer #12 (1.04mm) swap to Blue At layer #15 (1.28mm) swap to Orange At layer #21 (1.76mm) swap to Jade White for the rest.&nbsp;___________________________________________________________________________________If you like my work, please consider a small donation :) Thank you very much :*<a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=RWRXKCAEM86K8" rel="nofollow noopener">https://www.paypal.com/donate/?hosted_button_id=RWRXKCAEM86K8</a>&nbsp;

Goku Dragonball - HueForge

Dragon Ball 

Inje Print3D

ES: esta vez os dejamos un diseño 2D de Mario ardilla, para adornar cualquier pared.EN: Now, Here we leave you a 2D design of squirrel mario, to decorate any wall.

Mario Ardilla 2D

Mario 2D

Balzo98

His name is Tricky The Dino, the cutest triceratops on the planet!

Tricky The Dino

Dino

Litolunar

20% fill Without supports. &nbsp;And 100% fill in the logos.&nbsp;Tools needed:<ul><li>Welder</li><li>Tin</li><li>Screwdriver</li><li>Pliers</li><li>Lighter</li></ul><figure class="image image_resized" style="width:50.93%;"><img src="https://makerworld.bblmw.com/makerworld/draft/699266/2024-03-13_6adf9eb4af93f.jpg"></figure>&nbsp;Materials:<ul><li><a target="_blank" href="https://es.aliexpress.com/item/1005001411945792.html?spm=a2g0o.order_list.order_list_main.372.138b194d28Gq5c&gatewayAdapt=glo2esp" rel="nofollow noopener">High intensity LED</a></li><li><a target="_blank" href="https://es.aliexpress.com/item/32807032859.html?spm=a2g0o.order_list.order_list_main.380.138b194d28Gq5c&gatewayAdapt=glo2esp" rel="nofollow noopener">Battery</a></li><li><a target="_blank" href="https://es.aliexpress.com/item/32806159516.html?spm=a2g0o.order_list.order_list_main.467.138b194d28Gq5c&gatewayAdapt=glo2esp" rel="nofollow noopener">Battery holder</a></li><li><a target="_blank" href="https://es.aliexpress.com/item/1005005341202402.html?spm=a2g0o.order_list.order_list_main.386.138b194d28Gq5c&gatewayAdapt=glo2esp" rel="nofollow noopener">Usb c board</a></li><li><a target="_blank" href="https://es.aliexpress.com/item/1005006132144823.html?spm=a2g0o.productlist.main.7.595ft8PKt8PKfZ&algo_pvid=9937444f-0632-4cc7-a0e9-251359c48c22&algo_exp_id=9937444f-0632-4cc7-a0e9-251359c48c22-3&pdp_npi=4%40dis%21EUR%213.46%211.83%21%21%2126.55%2114.02%21%402103854617103473858987211eea8e%2112000035902824343%21sea%21ES%21197670400%21&curPageLogUid=erA4vf0EDvhZ&utparam-url=scene%3Asearch%7Cquery_from%3A" rel="nofollow noopener">Switch</a></li><li><a target="_blank" href="https://es.aliexpress.com/item/1005005911075741.html?spm=a2g0o.productlist.main.1.337c5f14Q6DWcP&algo_pvid=b20bbf03-bccb-4e5b-904d-adf050930eca&algo_exp_id=b20bbf03-bccb-4e5b-904d-adf050930eca-0&pdp_npi=4%40dis%21EUR%212.76%212.68%21%21%2121.13%2120.55%21%402103847a17103475050232872ea920%2112000034811093207%21sea%21ES%21197670400%21&curPageLogUid=o7KVlA7uBmIJ&utparam-url=scene%3Asearch%7Cquery_from%3A" rel="nofollow noopener">Heat shrink</a></li><li>6 x Screws (M6x25)</li><li>6 x brake nuts</li><li>1 x Resistance 10 ohms</li><li>1 x washer</li><li>Electric cables</li><li>Glue</li></ul>&nbsp;<figure class="image image_resized" style="width:61.8%;"><img src="https://makerworld.bblmw.com/makerworld/draft/699266/2024-03-13_e93506f46f363.jpg"></figure>&nbsp;&nbsp;&nbsp;&nbsp;Assembly instructions:&nbsp;&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/699266/2024-03-13_c1fd65dc9472f.png"></figure>&nbsp;<figure class="image image_resized" style="width:45.37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/699266/2024-03-13_3b37f1ad28a58.jpg"></figure><figure class="image image_resized" style="width:44.13%;"><img src="https://makerworld.bblmw.com/makerworld/draft/699266/2024-03-13_33c21b9a3f631.jpg"></figure>&nbsp;<figure class="image image_resized" style="width:54.25%;"><img src="https://makerworld.bblmw.com/makerworld/draft/699266/2024-03-13_6776c7a6b3ae1.jpg"></figure>&nbsp;<a target="_blank" href="https://www.instagram.com/reel/C4axH8-NaaX/?igsh=N3BvZW16d3hwZTcy" rel="nofollow noopener">https://www.instagram.com/reel/C4axH8-NaaX/?igsh=N3BvZW16d3hwZTcy</a>&nbsp;&nbsp;