Fantastic print. Using PLA and PETG for interface. Came apart very easily. Did have to use an exacto on the staff, but it came apart cleanly with some patience. I went for 0.08 layers from his beard tip up to really get the layer lines reduced on his face. I think the extra 4hrs on the print is worth doing that. Came out fantastic. If you've got your filament settings dialed in, this print will come out perfect for you. YOU SHALL NOT PASS.

Like the detail and print. It was pretty tricky to get it to successfully print due to support failures around fingers. I ended up cutting it just below the jacket line on the legs and printing in 2 pieces. Keeping the fingers closer to the plate and reducing the failure chance on the supports. Fingers came out mostly ok doing this. I was looking for high detail so I printed in 0.2 nozzle at 0.10 layer height and sized it up to 150mm tall. Total print time was 14hrs. But think it came around really good for how tricky of a model this is to print. thanks for posting it.

Fun print.

Great print. Modified its height and bottom to work with what I needed. But this was the perfect base to start from. Thank you.

She loves it.

So good, thank you very much. 12x12 print on a H2C.

Struggled with the hand and supports. But still a great looking print.

Fantastic print.

Fantastic print.

Great and fun print. I changed it up and made it doubled sided. I'll upload a remix of it for others to check out if they want it doubled sided.

Love it. Cute way for me to mount a mini in the garage. Thank you for the print. Came out fantastic on a H2C in 2hrs.

Great print. Turned out perfectly. Much easier to remind myself what AMS connect to what extruder. Thanks!

Fantastic print. Easy to change colors I wanted and printed on a 0.2mm nozzle at .10 layer height with ironing. Came out great. Thanks!

Great print. Used PLA for the body and PETG transparent for the clear. I did a custom support setup on the cover to ensure transparency all around. As lot of transparent prints I've seen had issues. I'll upload my profile shortly I think a bump stop should be added to the body to help lock the button in place. That'd be a nice add on to this.

Perfect fit on H2C. Thanks

Fit's perfect. Thanks. H2C.

great print. thank you

Did a 100% and 2 at 75%. Turned out pretty well. I found that since I"m gluing, clipping all of the inside locking pins helps it fold and stay together better. I just left the pins that need to align everything after you fold it.

Fantastic print. Shrunk them down to only hold spools to fit more in my limited space. Prints are fantastic and very robust. Thanks so much for making them! If you want spools only, scale them down to 220x220x74. This will make bambu rolls a tight squeeze, but they will fit while in a bag. Make the lid 220x220x8.8 to maintain aspect. I didn't have to scale the clips, they worked correctly at their normal size. Mix of Bambu, Esun and misc 1kg spools in my photo.