Tori07

3DFarmer

The figurine consists of three main parts that are easy to assemble. The centerpiece is the Stormtrooper helmet, iconic from &#34;Star Wars,&#34; made from shiny, white PLA. The helmet is detailed enough to include even the subtle lines and features from the original design.The second, but most intriguing element, is the skull visible through the cut in the helmet.&nbsp;This is an artistic take that combines themes of death and transience with the futuristic aspect of the helmet.&nbsp;The skull is made in a low poly style from a silver material, creating a striking contrast.&nbsp;&nbsp;All three parts are connected using two pegs, which ensures the stability of the structure and simplifies the assembly process. This project is not only visually compelling but also designed for straightforward production and assembly, making it a perfect piece of home decor or a collector’s item for fans of &#34;Star Wars&#34; and modern art.&nbsp;Attention ! On my patreon page is more Star Wars  projects :) Also all my projects are free for patreons, for this moment :)If you want to sell my projects check out my pateron page: <a target="_blank" href="https://patreon.com/3dfarmer" rel="nofollow noopener">https://patreon.com/3dfarmer</a>&nbsp;check out my patreon page :)&nbsp;&nbsp;

STORMTROOPER STAR WARS HELMET

Father

EFFEG studio

A new keychain comes from the JURASSIC ERA! 🦖🔑&nbsp;ENJOY!&nbsp;&nbsp;-- PRINTING PROBLEMS -- I know how frustrating it can be to have problems during a print, and I’m happy to receive constructive criticism or suggestions about the model, but please always calibrate the flow and if you have adhesion problems, try using the brim or a gripper. All these fails are not due to the model. All my files are tested before being published and the print profile with which I succeed is the one I publish. Thank you very much for your understanding and happy printing to everyone!

Articulated Triceratops Flexi

Work

DjangoCashflow

Bring the power of the galaxy to your home with this Death Star Floating Planter, a remix of the original model by <a target="_blank" href="https://www.thingiverse.com/thing:3432933" rel="nofollow noopener">tato_713</a>. This stellar planter is not only a nod to the epic space saga but also a unique way to showcase your love for botany and sci-fi in one go.  Features:<ul><li>Galactic Design: Expertly crafted to resemble the formidable Death Star, this planter adds a touch of intergalactic intrigue to your decor.</li><li>Floating Illusion: Mounted on a sleek pedestal, the planter creates a floating effect that defies gravity and captures the essence of its celestial inspiration.</li><li>Functional Art: More than a mere model, it serves as a fully functional planter, perfect for housing a variety of small plants or succulents.</li></ul>Installation is as simple as it is impressive: place your plant in the spherical planter, mount it on the pedestal, and watch your space transform with the power of the Force. Suitable for Jedi, Sith, and neutral beings alike, this Death Star Floating Planter is destined to become the centerpiece of any room it occupies. Resize both Death Star and stand at the same time to match your pot size!

Death Star Floating Planter

Golub17

Update  I have accepted all valid criticisms of the stem model. Even though I tried to make the branches thicker and tested many types of supports, it was not enough. Therefore, I made a new remixed model with my own self-modeled leaves. These are printed on the bed (unlike the old ones in the air) and positioned afterwards using heat.I would like to thank you all for printing, sharing your pictures, and commenting. Now, let me address the licensing and give proper credit to the original creators: Rose (original) - The original model was made by <a target="_blank" href="https://www.thingiverse.com/marsmathofficial" rel="nofollow noopener">marsmathofficial</a> on Thingiverse and published under CC BY-NC-ND 4.0 DEED, which means the model can be shared and distributed in its original form. DO NOT SHARE REMIXED VERSIONS OF THIS MODEL I am also sharing the original model; therefore, I am still respecting the CC BY-NC-ND license the original creator chose. Stem (remixed) - The original model was made by <a target="_blank" href="https://www.thingiverse.com/richardtracy" rel="nofollow noopener">Richard Tracy</a> on Thingiverse and published under CC BY 4.0 DEED which means the model can be shared and distributed in its original form or remixed. Base (original) - The original model was made by <a target="_blank" href="https://www.thingiverse.com/richardtracy" rel="nofollow noopener">Richard Tracy</a> on Thingiverse and published under CC BY 4.0 DEED which means the model can be shared and distributed in its original form or remixed. Vase - That's mine, made through MakeMyVase on MakerLab, nothing extra about it. Printing and processing instructions: Rose - should print as it is, i personally like the silk pla look. ;New updated stem (flat leaves) has no printing issues; Stem (old) - this is a tricky one, in an older post here by erin.wang, many had issues printing it. My remix addresses some of these by making the leaf stems thicker and painting custom supports, also, the stem is now longer and looks better in a vase. Print profile has fuzzy modifiers on leaves i personally like them that way. Print instructions: - use high-quality filament, which will prevent 90% of problems - if you encounter any issues, manually set the print speed to 50% (this gives layers more time to cool down) Post process instructions: 1. very carefully remove supports, start by small pieces from leaves and work your way down to the stem 2. carefully trim any excess material  3. use heat to remove stringing (i used a cheap filament your results may be better) and carefully heat the branches under leafs 4. pose leaves to a more natural position while the branches are heated Base - should print as it is, i personally like the fuzzy look. Now something about the rose model, i made myself one modification to it. And that is the hole at the bottom so the final gluing would be easyer. Sadly i cannot share this model with you here or anywhere since the original creator forbids sharing of a remixed model. But i can give you quick instructions on how to do it yourself, that far CC BY-NC-ND cannot reach. 1. Export the model from bambu studio (File - Export - Export all objects as STL) 2. Import in Blender (File - Import - STL) 3. Go to edit mode 4. Select the inner most ring on the underside (use select circle an maneuver around) 5. Press “S” to scale down (move your mouse to scale, click to confirm) 6. Press “E” to extrude (move your mouse to extrude, click to confirm) 7. Export the model from blender (File - Export - STL) 8. Add model to the bambu studio in the original rose profile Even better solution by <a target="_blank" href="https://makerworld.com/en/u/2175230856" rel="nofollow noopener">@tweaqr</a>In Bambu Studio Right click on the rose --> Add nagitive part --> cylinder Click OK to the message box Select Scale from the top toolbar and set the size to 4mm,4mm,4mm Select Move from the top toolbar and set the position to X 0mm, Y 0mm, Z-15mm

Rose with Stem (remix)

Hamstah

Update 25/11/2023: I've added stronger versions of all 3 sizes. Some people were having difficulty printing the original model, so I've increased the height and thickened the links to give the model quite a bit more strength. The trade off is that the model is slightly less flexible, but definitely still a lot of fun to play with. Hope that helps!--&nbsp;Dual sided triangle “chain mail” style fabric. Fun to play with! I recommend printing the tester first, as it is really important that the filament adheres well to the bed for a good print. If one triangle gets knocked off the bed, it can ruin the print (though I have had success if one or two get knocked loose).&nbsp;The easier model to print (and more fun in my opinion) is the 120mm square, but I included a 250mm wide strip for those that want more of it.&nbsp;I also highly recommend using a plastic scraper to remove the print from the bed, and you won't be able to get the fabric to release by bending the bed, and pulling on the fabric will snap the joints.&nbsp;Consider changing filament on the middle layer to get a second colour on the flip side of the fabric!&nbsp;Warning: The 250mm wide version of the fabric takes a very long time to slice!

Father

Work

nah

hot

fidget

Helpful