Mithrill

ittn15

小型的仓鼠藏身处，适合放在小笼子里面。

Hamster hideout(small size)

仓鼠hamster

skywolf

龙年特辑：新年剪纸合集

新年

Xlab3d

Adaptador de Pesos para Carretes de Filamento en BambuLab Ams-Filament Reel Weight Adapter for BambuLab AMS&nbsp;-Weight Customization: Adjust the amount of weight as needed.-Compatibility with BambuLab AMS: Designed to seamlessly integrate with the BambuLab AMS system.&nbsp;You can use the weight of your choice (Batteries, Lead, Sand, Stones, etc.)&nbsp;

Spool_Bambulab X1C / P1P/ P1S AMS

超级凤梨

MT9反吹玩具扩容弹夹并联器，仅适配原夹宽度的扩容夹，并联器需要使用两颗M3*10的杯头六角螺丝

无明业火MT-9反吹玩具扩容弹夹并联器，双夹并联器

无明业火MT-9

BC Designs

Mounting the external spool on the side for easier access, with added filament guide for smooth operation. &nbsp;&nbsp;Parts<ul><li>2 x 608ZZ bearings</li><li>1 x PC4-M10 Pneumatic Connector (optional, included filament arm for PTFE tubing for those without)</li><li>1 x m3 x 14mm or 16mm for the top screw hole (start with the smaller one first as can bottom out and get stuck easily).</li><li>2 x m3 x 18mm for the bottom screw holes.</li></ul>Connector: <a target="_blank" href="https://www.amazon.co.uk/gp/product/B0966XQ4C4/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1" rel="nofollow noopener">https://www.amazon.co.uk/gp/product/B0966XQ4C4/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1</a>&nbsp;Choose either the 3mf file with the PC4-M10 fitting, or the one with PTFE passthrough.&nbsp;Included 3mf file setup as follows:<ul><li>0.20 layer height @ 50% infil, I recommend PLA+</li><li>4 walls</li><li>4 top and bottom layers</li><li>Supports</li><li>Spool on 2nd build plate as I think the model looks better in 2 colours :)</li><li>Both filament arms included on build plate, remove the one you dont want.</li></ul>&nbsp;Assembly<ol><li>Spend a few minutes carefully removing the supports from the inner slots </li><li>Screw on the pneumatic connector to the filament guide and inert some bowden tubing. The PC4-M10s allow the tubing to pass through.</li><li>Screw to side of case using the top back case screw hole and the 2 original screw holes.</li><li>Slide on spool holder. </li><li>Slide on filament arm.</li><li>Detatch when not in use or leave as is.</li></ol>

仓鼠hamster

新年

AMS

无明业火MT-9

p1p补丁