Misterobots

DutchieDavid

No screws or adhesives needed. I needed a way to attach my IKEA Rill casters to the legs on my IKEA Lack table without damaging the table.The casters slide right in and lock in place due to the sag in the layer above the slot. Not intentional but that worked in my favour.&nbsp;I used tree supports as they came off better. I printed it with the caster side down.As a happy accident, the overhang on the front of the spot where the caster slides in sags just enough to lock the caster into the part after sliding it in.

Ikea lack table to rill caster connector

lack

Jag_CDN

Custom drinks coasters for all 2024 F1 teams. Printed with a 0.2mm nozzle to get better details.&nbsp;UPDATE April 28, 2024: I made a very small change to all coasters to give them a slightly better rounded edge and smoother sides.&nbsp;Coasters:<ul><li>0.2mm nozzle</li><li>0.12mm layer height</li></ul>&nbsp;Holder (6 and 10 coasters):<ul><li>0.4mm nozzle</li><li>0.2mm layer height</li><li>Scale on Z axis to your preferred number of coasters to hold. Coasters are 5mm thick, allow 4mm for holder base. So if you want a hold for 4 coasters scale Z axis to (4x5+4) =24mm</li></ul>&nbsp;

F1 Team Coasters 2024

House Stuff

mathiasrask

Cone tool for making pottery circular

Pottery Rim Cone 

Pottery

West-DEV

This is the print in place version of the previously posted mask <a target="_blank" href="https://makerworld.com/en/models/245584" rel="nofollow noopener">here</a>. &nbsp;This Half-Mask was designed to demonstrate what a military respirator might look like in the future. Naturally, as a cosplay prop, it can be used or modded to fit a number of original concepts and characters. &nbsp;I wanted to offer the option to one-shot the mask in multiple colors. This would also avoid the need to glue the pieces together at the end. &nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/700119/2024-03-10_3a7974cc85d54.jpg"> I suggest scaling the model down to around 97% to fit most faces. Also, tree supports made this project possible.&nbsp;If you have a problem with retractions, please see <a target="_blank" href="https://makerworld.com/en/models/245584" rel="nofollow noopener">this model</a> instead as you will be able to print the propellors separately.&nbsp;This version (above) was printed in Silk PLA on a QIDI X-Max and it took up most of the build plate. &nbsp;(that is a build volume of 300 x 250 x 300 mm)&nbsp;&nbsp;

Print in place Military Cyberpunk Mask

masks/helmets/hats

TripleGWorkshop

Seems like it holds any size phone or tablet.<figure class="image image_resized" style="width:77.71%;"><img src="https://makerworld.bblmw.com/makerworld/draft/123377/2023-10-27_74l22dahcznw.jpg"></figure><figure class="image image_resized" style="width:61.49%;"><img src="https://makerworld.bblmw.com/makerworld/draft/123377/2023-10-27_6jnawjanu5tl.png"></figure><figure class="image image_resized" style="width:75.2%;"><img src="https://makerworld.bblmw.com/makerworld/draft/123377/2023-10-27_2pu3efqd3zir.png"></figure><figure class="image image_resized" style="width:78.68%;"><img src="https://makerworld.bblmw.com/makerworld/draft/123377/2023-10-27_a9lntt6oc4oy.jpg"></figure><figure class="image image_resized" style="width:79.06%;"><img src="https://makerworld.bblmw.com/makerworld/draft/123377/2023-10-27_4s9z6cfuw1qr.jpg"></figure><figure class="image image_resized" style="width:79.78%;"><img src="https://makerworld.bblmw.com/makerworld/draft/123377/2023-10-27_uhfandsv0atd.jpg"></figure>

Tired Bot Phone & Tablet Stand

Gift Prints

Imaginarydave

This is a 2nd Stage air filtration system based on thrutheframe's excellent <a target="_blank" href="https://makerworld.com/en/models/12786#profileId-24358" rel="nofollow noopener">Bento box recirculating air filter</a>. the goal of course being to remove as many VOC's as possible. This is a add on to the full bento box to add extra filtration. &nbsp;FEATURES<ul><li>Second stage air filtration that creates a sort of negative pressure system to filter air that comes out the chamber fan opening.<ul><li>I torture tested this by running it without the bento box on. on a 2 hour print with ABS the smell in the room became perceptible after about an hour, indicating that it was doing a pretty good job on its own. When used with the bento box even my wifes Burton Guster level supersniffer was not bothered.</li></ul></li><li>Air bypass ensures it is not pulling excessive air out of the chamber causing loss of heat retention</li><li>Can be turned off when not needed.</li><li>When off it works as an excellent exhuast muffler.</li><li>AMS compatible</li></ul>WHAT YOU WILL NEED<ul><li>I intentionally didn't include the hepa and carbon portions of the original bento box. Support thrutheframe and print plates 2,3,4 from his print profile. you can remove the model for the fans as I had to modify it to run the wires.</li><li>M3 x4mm (4.2mm OD) threaded inserts - I used ones from this kit: <a target="_blank" href="https://amzn.to/3RKi3KF" rel="nofollow noopener">https://amzn.to/3RKi3KF</a> alternatively if you arent in a rush. <a target="_blank" href="https://www.aliexpress.us/item/3256804693330073.html?spm=a2g0o.order_list.order_list_main.4.74321802075kPI&gatewayAdapt=glo2usa" rel="nofollow noopener">Aliexpress </a>is a super cheap source of getting lots of threaded inserts. you can never have enough for 3d printing.</li><li>m3x25mm cap head screws x4, and m3x6mm scews x8 - this kit is excellent if you dont already have them: <a target="_blank" href="https://amzn.to/3H2TMKM" rel="nofollow noopener">https://amzn.to/3H2TMKM</a></li><li>SPST round rocker switch <a target="_blank" href="https://amzn.to/3tsDHuR" rel="nofollow noopener">https://amzn.to/3tsDHuR</a> </li><li>5.5x2.1mm DC power jack <a target="_blank" href="https://amzn.to/3S1UH4k" rel="nofollow noopener">https://amzn.to/3S1UH4k</a> </li><li>40x20 fan - <a target="_blank" href="https://amzn.to/48C0y6w" rel="nofollow noopener">https://amzn.to/48C0y6w</a> <ul><li>If you're starting fresh, The ideal solution IMO is to print the <a target="_blank" href="https://makerworld.com/en/models/21259#profileId-19505" rel="nofollow noopener">DK riser </a>and the <a target="_blank" href="https://makerworld.com/en/models/12786#profileId-24358" rel="nofollow noopener">original bento box</a>, buy 2 sets of the 24 V fans from the link above, a set of <a target="_blank" href="https://www.amazon.com/gp/product/B0BCV91L1P/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1" rel="nofollow noopener">24 V COB LEDs</a> , <a target="_blank" href="https://amzn.to/3vj0k5n" rel="nofollow noopener">a 3 way splitter</a>, and then you can run both bento box fan sets, and the LEDs off the power supply from the LEDs</li><li>Pay attention to voltage. If you have a bento box, pick one that matches your bento box and use a splitter like one of these: <a target="_blank" href="https://amzn.to/41Fp4AW" rel="nofollow noopener">https://amzn.to/41Fp4AW</a>. If you did the 5V modification to run 5V fans in the original bento box you could tap that same power source and run 5V fans. </li><li>40x28 fans are an option. I found the 40x20 adequate, but here is a link if you would like more power. <a target="_blank" href="https://amzn.to/3RKqFAU" rel="nofollow noopener">https://amzn.to/3RKqFAU</a></li></ul></li><li>Power supply - I keep a massive supply of these from old electronics and can always find one to work, but if you need to you could buy one of these. <a target="_blank" href="https://amzn.to/3H2jKxX" rel="nofollow noopener">https://amzn.to/3H2jKxX</a> **some links are affiliate links. </li></ul>&nbsp;

Bento Smoke stack - Stage 2 air filtration

Upgrades

Houston713Texan

I made a huge HueForge print of my most popular download! (8 plates total, 32in long)colors used pla black pla red pla silver/graypla white

scary friends huge 8 plate (HueForge print)

Stuff to Print

3DPrintCraft

This is a re-mix created to work fine on the Bambu Printers. With a height of 100mm it's very compact. &nbsp;Makes for a ideal gift to slip some cash or a note in the inner tube. Great fun for family and friends. &nbsp;Printed in PETG for extra strength on the notches and slowed down the outter and inner walls for better layer adhesion. Enjoy.

Russian Random Maze Puzzle Gift Box 

Christmas 

DrinkwareReimaginedInNovelKoozie This is a modular Koozie system that was inspired by Mupshot and their “Convertible Koozie” design. I've remixed the design, adding some additional functionality (Adapt to “slim” cans and standard bottles (both types)) and adjusting some tolerances. Please feel free to let me know of any issues or adjustments needed. ENJOY! The complete configuration of 5 modules gives you a Koozie that can support 12oz cans (Regular and Slim), 16oz cans (Regular and Slim), and both types of “standard” 12oz glass bottles. It's a drinking puzzle, it's one koozie for all, and it's fun!