MindblownMaker3D

Genetic Toys

Filament Storage Box for <a target="_blank" href="https://makerworld.com/en/models/395861" rel="nofollow noopener">Filament Dry Box Hinged Label Tab</a>.&nbsp;When filament is consumed and filament label no longer needed, I wanted to store them to be utilized again after I restock that filament type, brand, and color. &nbsp;

Filament Labels Storage Box

Filament Dry Box

DesignCraft

DISCLAIMER: Print profiles NOT created by DesignCraft may contain outdated model versions or suboptimal slicer settings. Use at your own risk! I have no control to moderate or remove these third party print profiles.&nbsp;The Sunlu v2 print profiles include the latest models for this adapter system. The models have been updated to include the <a target="_blank" href="https://amzn.to/3QIOVEk" rel="nofollow noopener">SUNLU</a> nameplate and also reduce the amount of material needed for each print. Please refer to the Disclaimer above and also please read the Considerations section below.&nbsp;Description:<ul><li>This model widens one side of the spool ring adapter to stabilize a SUNLU 1kg 195x60mm spool while it rotates within a Bambu Lab AMS. </li><li>I've tested these adapters on SUNLU PLA and SUNLU PLA Meta spools. I have not tested on SUNLU PLA+ and some people have reported that the PLA+ spools are larger. Please measure your spool before printing.</li></ul>Instructions:<ul><li>Print one of each model for a single spool.</li><li>Affix the wide spool ring adapter on the right-hand side of the SUNLU spool if you're facing the AMS.</li><li>See attached photos.</li></ul>Considerations:<ul><li>Print Material: Please print with a basic PLA or PETG to minimize any shrinkage.</li></ul>

SUNLU Bambu Lab AMS Spool Adapter Ring

AMS Spool Adapters

jdicerchio

This is a “Big Brick&#34; of Han Solo in carbonite. I remixed from <a target="_blank" href="https://www.thingiverse.com/thing:2040644" rel="nofollow noopener">https://www.thingiverse.com/thing:2040644</a> and added handles that fit into the hands on BigBricks figures. Check out all of his models on Thangs!

LARGE Han Solo in Carbonite - Big Brick

Star Wars

glen.waelbers

This is a stand for an airbrush (specifically designed for Fengda FE-130K)A stand like this can be very helpfull to fill up the paintcup, cleaning the airbrush or just for storing it.&nbsp;Please leave a comment if it also works for other airbrushes ;)

Airbrush stand

Airbrush

nickelken

What's the hole on top of your P1S for?? Well now you can attach your favorite bobble head using <a target="_blank" href="https://www.printables.com/model/282561-parametric-bobblehead-springs" rel="nofollow noopener">https://www.printables.com/model/282561-parametric-bobblehead-springs</a>.Base has a left and right side to lock into place.&nbsp;

P1S Bambu bobble base

Printer tools

Robert ONeill

Fit the pyramid into the box . I printed it fine resolution but It fits if it is printed at fast res. no need for support. Most printers will bridge the overhang fine.

Puzzle box

Toys

migueljeronimoa

The provided script generates a 3D model that creates text inside a polygon shape. Utilizing strategic overhangs, the text appears to be almost floating within the shape.&nbsp;<h3>Quick guide:</h3><ul><li>Press the customize button and edit the parameters as you want. </li><li>Option A: Export the model in stl and import it into Bambu Studio and select &#34;Arachne Wall generation&#34; and “no supports”.</li></ul><figure class="image image_resized" style="width: 37.04%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000484240/design/2024-06-12_f77051bb3afec.png"></figure><ul><li>Option B: Download the profile “SuspendedMaker - Model template” and replace the model with the generated stl</li></ul>&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000484240/design/2024-06-12_7b2c3729df592.png"><h3>Customization:</h3><ul><li>Text Content: The variable text_content contains the text to display in the 3D model. Default: “Miguel.”</li><li>Text_content_2: This variable allows writing a second line of content, if it is empty, it will center the first one.</li><li>Font Type: The font_type variable specifies the font for the text. You can choose from various fonts such as “Noto Sans SC,” “Inter,” “Montserrat,” etc (all available at makerword customizer)</li><li>Font Size: The font_size parameter determines the size of the text.</li><li>Polygon Shape: The script creates a polygon with a specified number of sides (num_sides). This value can be adjusted between 4 and 20.</li><li>Extrusion Width: The width parameter controls the extrusion width of the polygon.</li><li>Frame Width: The frame width.</li></ul><h3>Additional Notes:</h3><ul><li>Expert Options: The script includes advanced parameters for fine-tuning the model, such as vertical_line_offset, line_width, line_spacing, height_gap, and gap_factor. Adjust these parameters if necessary to achieve the desired result.</li></ul><h3>Printing Instructions:</h3><ol><li>Preparation: Download the attached profile, remove the default model, and add your generated model. This ensures the configuration works as expected.</li><li style="text-align: center">Preview Check: Always check the preview tab to confirm the model is complete and the slicer has not removed any parts. <img class="image_resized" style="width: 41.63%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000484240/design/2024-06-04_9ecce09a642c7.png"></li><li>Aracne Wall Generation: Ensure the Aracne wall generation option is active to generate the necessary overhangs.</li><li>Model Orientation: Keep the model orientation as generated to ensure that the overhangs are properly calculated.</li></ol>&nbsp;<h3>Improvements backlog:</h3><ul><li>Allow simpler colouring of the model</li><li>Select if you want the model to be faced up or down for better look of the front layer</li></ul><h3>Changelog:</h3><ul><li>v2: Added support for second line</li><li>v1: Initial release</li></ul>If you like the model, give it a like and share a boost if you have an extra one. All comments, suggestions, features are welcome, so feel free to leave a comment with it.&nbsp;<h3 style="text-align: center">Some of my related work, you will probably like:</h3><figure class="table" style="width: 71.42%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><a target="_blank" href="https://makerworld.com/en/models/484240#profileId-396575" rel="nofollow noopener">Suspended heart text generator</a><figure class="image image_resized" style="width: 97.26%"><a href="https://makerworld.com/en/models/484240#profileId-396575" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000484240/design/2024-06-12_56c29f05dcdeb.png"></a></figure></td><td><a target="_blank" href="https://makerworld.com/en/models/480593#profileId-392200" rel="nofollow noopener">Lightbox text generator</a><figure class="image image_resized" style="width: 71.13%"><a href="https://makerworld.com/en/models/480593#profileId-392200" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000484240/design/2024-06-12_c10d4f6eefb7d.png"></a></figure></td></tr></tbody></table></figure>&nbsp;<h3 style="text-align: center">  </h3>&nbsp;

Suspended text generator

Stuff to print

ozarkexpeditions

<h2>Customizable Brand Name Compatible Bricks – Now on MakerWorld!</h2>I&#39;m thrilled to share these fully customizable compatible bricks with you! This is the most complete brick designer that you&#39;ll find on MakerWorld and we&#39;re excited to see what you create. With this SCAD generator, you can create a wide variety of compatible bricks tailored to your needs. Whether you&#39;re a hobbyist, a maker, or just looking to enhance your building experience, these customizable bricks will add a new level of creativity to your projects.<figure class="image image_resized" style="width: 40.84%"><a href="https://makerworld.com/en/models/492674#profileId-406303" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479021/design/2024-06-11_06aac4d169af5.png"></a><figcaption>📢 New! We&#39;ve just released the <a target="_blank" href="https://makerworld.com/en/models/492674" rel="nofollow noopener">Brick Your Name</a> customization tool. Give it a try today!</figcaption></figure><figure class="table"><table><thead><tr><th colspan="6">So many options!</th></tr></thead><tbody><tr><td>Bricks</td><td>Wings</td><td>Slopes</td><td>Curves</td><td>Baseplates</td><td>Rounds</td></tr></tbody></table></figure><figure class="image image_resized" style="width: 73.61%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479021/design/2024-05-29_56a563fc19249.png"></figure><blockquote>I have received written permission from the original author, <a target="_blank" href="https://github.com/cfinke" rel="nofollow noopener">Christopher Finke</a>, for the OpenSCAD model and am publishing this under the same MIT license. Check out the original repository on GitHub <a target="_blank" href="https://github.com/cfinke" rel="nofollow noopener">here</a>.</blockquote><h2>How to Customize Your Bricks</h2>Step 1: General Settings<ul><li>Block Width: Set the width of the block in studs.</li><li>Block Length: Set the length of the block in studs.</li><li>Block Height Ratio: Choose the height ratio (e.g., standard brick height, plate height, etc.).</li><li>Block Type: Select from Brick, Tile, Wing, Slope, Curve, Baseplate, or Round.</li><li>Block Brand: Choose the size and compatibility.</li></ul>Step 2: Shape-Specific Settings<ul><li>Customize additional settings specific to the block type you selected (e.g., wing type, slope height, curve type, baseplate, round radius, etc.).</li></ul>Step 3: Advanced Settings<ul><li>Stud Type: Select between solid or hollow studs.</li><li>Block Bottom Type: Choose between open or closed bottom blocks.</li><li>Wall Splines: Include wall splines for better stability (valid for open bottom blocks).</li><li>Technic Holes: Add horizontal or vertical holes for Technic compatibility.</li><li>SNOT (Studs Not On Top): Option to place studs on the top and bottom or no studs on either side.</li><li>Dual-Sided and Dual-Bottom Options: Customize stud configurations for dual-sided or dual-bottom bricks.</li></ul>Step 4: Printer-Specific Settings<ul><li>Use Reinforcement: Include extra reinforcement for easier printing on FDM printers. This is set to ‘yes’ by default. </li><li>Stud Rescale: Adjust the stud diameter for your specific printer settings.</li><li>Stud Top Roundness: Specify the roundness of the stud tops.</li></ul>Tips<ul><li>Customization: Experiment with different stud shapes and internal structures for unique designs.</li><li>Compatibility: Ensure for accurate sizing by printing </li><li>Personalization: Use custom colors options to create personalized bricks for special projects. Use the color painting features in Bambu Studio to make you bricks even more unique. </li></ul>Important NoteThis customizable model is designed for personal and educational use and not for commercial reproduction or sale under these brand name trademarks.&nbsp;Feedback WelcomeI hope you enjoy using this customizable brick generator. Your feedback is invaluable, so please let me know if you have any suggestions or improvements. Together, we can make the MakerWorld platform even better!&nbsp;Explore More of Our Models! <a target="_blank" href="https://makerworld.com/en/models/463568" rel="nofollow noopener"><img class="image_resized" style="width: 29.54%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479021/design/2024-05-13_0d1f6d3fca672.png"></a><a target="_blank" href="https://makerworld.com/en/models/452361" rel="nofollow noopener"><img class="image_resized" style="width: 25.72%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479021/design/2024-05-03_52b9e8ccc8501.gif"></a><a target="_blank" href="https://makerworld.com/en/models/390175" rel="nofollow noopener"><img class="image_resized" style="width: 30.63%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479021/design/2024-03-23_20f08dbba5d8e.gif"></a>

Ultimate Brick Customizer on MakerWorld!

Lego

JamesRagnar

<h2>AMS Gridfinity Baseplate</h2>A lightweight Gridfinity baseplate to add storage space in front of your AMS unit, featuring 14 standard Gridfinity baseplate squares and an extra 4 half-size spaces. This baseplate is held in place around the front two feet of the AMS unit so there is no need to use any other retaining method to keep your storage units secure to the printer. The baseplate is sized to be fully constrained to the glass section of the printer top, so it is compatible with risers.&nbsp;---&nbsp;You can use these half-size Gridfinity containers on the 4 smaller baseplate sections:<a target="_blank" href="https://makerworld.com/en/models/162911" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/585075/2024-02-06_f206b3cbe70a1.png"></a><a target="_blank" href="https://makerworld.com/en/models/162911" rel="nofollow noopener">Half-Size Gridfinity Container Collection + FreeCAD Generator</a>

AMS Gridfinity Baseplate

Gridfinity

vib 3d crafts

PolyDice

Gaming

GlennovitS 3D

<figure class="table"><table style="border:1px double rgb(179, 179, 179);"><tbody><tr><td style="border:4px solid hsl(90, 75%, 60%);padding:0.4em;">😄 Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models, get access to exclusive models, and get commercial rights, to sell prints of my models. <a target="_blank" href="https://www.printables.com/@GlennovitS3D#join" rel="nofollow noopener">Join today - GlennovitS3D</a> - or check out my <a target="_blank" href="https://makerworld.com/en/@GlennovitS3D" rel="nofollow noopener">model collection</a> 🗂️</td></tr></tbody></table></figure>This is a quick and practical print you will actually use! A small and compact bit-driver that stores 3 extra bits. Fits easily in the pocket and great to bring with your most used bits.If you want to, you can print multiple versions and colorcode them with different types of bits in each one!<h2>Overview 🔍</h2><figure class="image image-style-side"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000417208/design/2024-04-07_0686d33edd6ca8.jpeg"></figure>The bitdriver is made to use 1/4&#34; (6.35 mm) Hex driver bits. It comes with different versions for you to choose from.The handle comes in 2 sizes, based on the length of bits it can store:<ul><li>Short - for 25 mm bits</li><li>Long - for 50 mm bits</li></ul>The base (bottom of the handle) comes with different screw-types on the bottom:<ul><li>Blank (no icon)</li><li>Flathead</li><li>Philips (PH)</li><li>Pozidrive (PZ)</li><li>Torx (TX)</li><li>Hex</li><li>Square</li></ul>To print the screw-type and not just a single color base, see instructions below<h2>Multicolor prints 🖌️</h2>This is optional - but looks nice and help you take the right one in first try. You can do like this (in Bambu Studio):<ol><li>Insert the Base/Handle you want</li><li>Right click on the model and click on Split &gt; To parts</li><li>In the left pane Process click on Objects</li><li>Select individual parts of the base/handle and choose filament for each.</li></ol><h2>Assembly 🛠️</h2>This one is easy - print a handle and a base and screw them together!Optional: A magnet with diameter of 5 or 6 mm, can be glued in the handle below the bit. Not necesary, as the fit should be fairly tight.<h2>Print instructions 🖨️</h2><figure class="image image-style-side"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000417208/design/2024-04-12_709bda52c931f8.jpeg"></figure>To make these strong enough for practical use, consider stronger-than-average print settings. Suggestions:<ul><li>Walls/perimeters: 3-5 - the more walls, the stronger - so test and see what you find the best.</li><li>Infill: 20-40% - the more infil, the stronger it will be.</li><li>Supports: No - the print-in-place hinge prints without supports!</li></ul><h2>Need extra bit-storage? ❇️</h2>Also check out my new Compact Bit Box - to match your new DIY tool kit! <a target="_blank" href="https://makerworld.com/en/models/424726#profileId-328159" rel="nofollow noopener">https://makerworld.com/en/models/424726#profileId-328159</a><figure class="table" style="height:0px;width:0px;"><table style="border:4px solid hsl(90, 75%, 60%);"><tbody><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">More practical prints? I got you covered! Check out this <a target="_blank" href="https://makerworld.com/en/@GlennovitS3D/collections/85011" rel="nofollow noopener">collection of practical models</a> - everything from tools to storage solutions. Or maybe see this <a target="_blank" href="https://makerworld.com/en/@GlennovitS3D/collections/1221351" rel="nofollow noopener">collection of tool models </a></td></tr></tbody></table></figure><h2>Filament 🧵</h2>I printed these in filament sponsored by FormFutura - and they work great! To be sturdy enough for practical use I used their Tough PLA mostly - and their Easyfill PLA for color organizing. If interested, check out their products here:- Tough PLA (aff): <a target="_blank" href="https://formfutura.com/product/tough-pla/?aff=11" rel="nofollow noopener">https://formfutura.com/product/tough-pla/?aff=11</a>- Easyfil PLA (aff): <a target="_blank" href="https://formfutura.com/product/easyfil-pla/?aff=11" rel="nofollow noopener">https://formfutura.com/product/easyfil-pla/?aff=11</a><h2>Want to show your support?</h2>You can see ALL my designs on Printables - and you can become an active supporter. I would really appreciate it!<a target="_blank" href="https://www.printables.com/@GlennovitS3D#join" rel="nofollow noopener">https://www.printables.com/@GlennovitS3D#join</a>&nbsp;Happy printing!