Mikeloncio

FollowForCoolModels

<h2>Original Harry Potter Inspired Wands </h2><h2>Fan-made Designs created originaly by me in Fusion 360 based on movies and other material</h2>Disclaimer:While there are other collections of Harry Potter-inspired wands out there, this collection is my own creative interpretation. I created each one in Fusion 360. This is my Original and no Remix!!!!<h2>Not Official Replicas</h2><h3>Description:</h3><h4>This collection features my original designs of wands inspired by the Harry Potter series. Each wand has been meticulously crafted to capture the essence of the magical world while adding my unique touch. </h4><h4>These models are fan-made and are not official replicas from the movies. </h4>&nbsp;Features: - Unique, detailed designs inspired by various characters and elements from the Harry Potter universe. - Optimized for 3D printing with print profiles.. &nbsp;Disclaimer:These models are original creations based on inspiration from the Harry Potter series and are not affiliated with or endorsed by Warner Bros. or J.K. Rowling. They are intended for personal use and enjoyment by fans of the series. Happy printing and may your magic be strong!

Harry Potter Wand Collection -  Hogwarts Wands

Harry Potter

Codyinbody3

Hey all, this is the finaly Fallout lightbox I plan on making for awhile. This was made by special request from one of my followers and I thought it looked cool so I went ahead and made it. Enjoy!&nbsp;Settings: The print profile settings are setup specifically for the frontplate only so you won&#39;t have wisps or colors bleed into each other or have those random dots of a darker color that you can only see when you get a light behind it. These are the best settings I&#39;ve found to take care of that out of the 1000s of lamps I&#39;ve printed. When going to print the backplate, be sure to change the filament settings. You&#39;ll want to change the first layer and other layers temps back to 220 on both. Then you can choose to take off retraction and zhop but it won&#39;t mess with the quality either way.

Vault Boy Nuke Riding LED Lamp

Led lamp

Mafio420

<div><h1 class="thing-component-header summary summary">Summary</h1><div>I created this small stand for an 8x32 MAX7219 LED dot matrix. It should work for other sizes as well. Feel free to modify or remix the file as you like.</div><h1 class="thing-component-header settings print-settings">Print Settings</h1>Printer Brand: <div>Creality</div> <pre><code> Printer: <div>Ender 3</div></code></pre> Rafts: <div>Doesn&#39;t Matter</div> <pre><code> Supports: <div>Doesn&#39;t Matter</div></code></pre> Resolution: <div>0.2mm</div> <pre><code> Infill: <div>15% or higher</div></code></pre></div>

arduino uno stand with MAX7219 led matrix

arduino 

Yarn 🎖️

If you like it, please press<img class="image_resized" style="width: 3.24%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000493033/design/2024-06-02_bbe512dc7b856.png">!<img class="image_resized" style="width: 3.24%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000493033/design/2024-06-02_bbe512dc7b856.png">gives me a lot of strength<figure class="image image_resized" style="width: 71.67%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000493033/design/2024-06-10_2b58860de4849.png"></figure>Play your happy moments on the record player. The emotions of record albums and memories of photos Keep your memories with record players. Our record player model offers a design where you can insert pictures of your loved ones into the record section. On a special day, give a special gift with memories to your loved ones! <figure class="image image_resized" style="width: 69.98%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000493033/design/2024-06-10_6234267b1d492.png"></figure>  <figure class="image image_resized" style="width: 75.74%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000493033/design/2024-06-10_d140d5f493516.png"></figure>Inside the light box, there is a small storage space to store the ring!&nbsp;<figure class="image image_resized" style="width: 50.83%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000493033/design/2024-06-10_792d34066f163.jpg"></figure>You can make a HueForge music album cover, too!(HueForge size 100x100)     <h2 style="text-align: center">👇Creating a Circle shaped Lithophane👇</h2><a target="_blank" href="https://lithophanemaker.com/Lithophane%20Tag.html#processing" rel="nofollow noopener">https://lithophanemaker.com/Lithophane%20Tag.html#processing</a> <h2 style="text-align: center">***Setting***</h2><figure class="image image_resized" style="width: 85.37%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000493033/design/2024-06-10_945bbb138c786.png"></figure>No HoopRadius : 50Frame Width : 0Frame Height : 0Max Thickness : 2   <h2 style="text-align: center">👇Edit Text &amp; Font👇</h2><figure class="image image_resized" style="width: 95.56%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000493033/design/2024-06-10_af8a181d46854.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000493033/design/2024-06-15_d2c39fbb01cb8.png"></figure>

Lithophane Record Player - LED Kit 001

Litofanias

PrintMyDesign

Easy to print

EARRING RABBIT

Pendientes

Madness3D

If you have AMS, the filament swap will change at the correct layer.&nbsp;If you need to swap filaments manually add a pause at the described layer below.Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Matte Charcoal PLA BambuLab Glow Green &nbsp;Swap Instructions: Start with Black At layer #6 (0.88mm) swap to BambuLab Green for the rest.

"Glowing" - Joker

glow

Regis

<h2>Stimpak: Your wasteland lifesaver!</h2>Injured? Irradiated? On the brink of death?Stimpak will get you back in the game in an instant!Heals injuries, stops bleeding, increases radiation resistance and provides energy.Essential for Vault Dwellers, ideal for combat and wasteland survival.Easy to use and compact.Get Stimpak today!Available at all good wasteland merchants.&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Jade White Transmission Distance: 5&nbsp;Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Red At layer #13 (1.12mm) swap to Blue Gray At layer #18 (1.52mm) swap to Jade White for the rest.

Fallout - Stimpack Poster

Fallout

D.L.lab

Diametro: 200 mmAltezza complessiva: 6,8 mmLarghezza foro centrale: 8 mmAltezza layer: 0.20Riempimento: Griglia al 25%No supporti&nbsp;Colore iniziale: NeroCambio colore al layer 26 - 5,20mm (bianco)&nbsp;&nbsp;

Triumph clock

Relojes

Tala16

Lube Helper injection syringe bambulab x1c p1s p1p

Lube Helper injection syringe bambulab x1c p1s p1p

Mantenimiento

Three Dimensions

Superman Hitch Cover - All one piece print for strength and easy printing

Superman Hitch Cover

Hitch cover (cubre bola remolque

Celestin

You&#39;re tired of seeing your desk cluttered with 3D printing debris or various waste!&nbsp;The solution is here: a trash can that attaches directly to your desk. Simply slide it on, and your waste will now be confined to one place.&nbsp;It&#39;s as simple as that: you print it and screw it onto your desk. It can be adapted to desks up to 3.5 cm thick. I&#39;ve added a piece of TPU to ensure better grip under constraint.&nbsp;I made 2 versions of my trash can, one large which you can see in the photos with a height of 160 mm, and another smaller one with a height of 115 mm, for those with less filament and who want to print faster. (The assembly remains the same.)&nbsp;And there you have it, problem solved! With its large capacity, you won&#39;t need to empty it every day; it can hold a lot for a long time.&nbsp;IMPORTANT NOTE: There may be a slight lack of grip for the trash can to hold well. To remedy this, you can apply a bit of hot glue on the top of the trash can that is in contact with the table.  After several tries, I found that the best solution was to put the trash can under constraint with the TPU. To do this, you screw the trash can normally to the table, then you remove it and tighten it a bit more. This way, when you put the trash can back in place, it will be well secured and will hardly move at all. Good impression!

Desk trash bin

Basura

dominator334

all my keychains are now free for commercial-use&nbsp;5 variations of love hearts keychains / necklace charms&nbsp;can be used as keychain or added to necklace as a charm&nbsp;all my keychains are layered to give depth with black being at the back so no or little bleed effect check out the rest of my keychain collection by clicking on my profileor this link&nbsp;<a target="_blank" href="https://makerworld.com/en/u/4294357896" rel="nofollow noopener">https://makerworld.com/en/u/4294357896</a>

5 love hearts , valentines keychains / necklace charm (free for commercial use)

Madre

K2_Kevin

Other sizes (4x3, 4x5, 4x6) available here: <a target="_blank" href="https://makerworld.com/en/models/201205#profileId-221569" rel="nofollow noopener">https://makerworld.com/en/models/201205#profileId-221569</a>&nbsp;Don&#39;t forget to Follow! Thank you so much for your Downloads, Like and BOOSTS!&nbsp;&nbsp;PRINT SETTINGS:<ul><li>Layer Height: 0.2mm</li><li>Supports on drawers only: RECOMMENDED (Tree Supports on front lip ONLY)</li><li>Build Plate: I recommend using GLUE / Nano Polymer to prevent warping!</li></ul>&nbsp;What&#39;s changed &amp; reimagined?<ul><li>Added drawer stops!!! Don&#39;t accidentally spill your screws.</li><li>Added alignment space for easy stack-ability</li><li>Added large magnet top</li><li>Smooth sided version so they sit close together without gaps.</li><li>28 Drawer slots</li><li>Included my own and original no scoop drawers</li><li>Compatible with all original drawers.</li><li>6x3 magnets with glue. Glue in hole(s), then use another magnet on top to slide/drop them in place.</li></ul>Video of the ScrewUnit in action! <a target="_blank" href="https://www.tiktok.com/@k2_kevin/video/7333459188099730719?is_from_webapp=1&amp;sender_device=pc&amp;web_id=7287757770546497067" rel="nofollow noopener">https://www.tiktok.com/@k2_kevin/video/7333459188099730719?is_from_webapp=1&amp;sender_device=pc&amp;web_id=7287757770546497067</a>&nbsp;&nbsp;Reimagined design of Modbots organizer.ModBots Original: <a target="_blank" href="https://thangs.com/designer/Modbot/3d-model/Voron%200.1%20Hardware%20Organizer-23915" rel="nofollow noopener">https://thangs.com/designer/Modbot/3d-model/Voron%200.1%20Hardware%20Organizer-23915</a>

ScrewU-nit Hardware Organizer Storage

cajas TOC

Michele MM3D

Hueforge T-Rex only 2 color&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions: Start with Black At layer #5 (0.56mm) swap to Jade White for the rest.

T-Rex Hueforge 2 color

Hueforge

铸造师

剑刃我用的是天瑞的闪光银PETG需要4颗M3*10平头木螺纹自攻螺丝固定底座族徽标志用的是胶水固定

草稚剑

Naruto

Familia

Spenny

Fathers day gift, printed in 4 pieces. No AMS required. The 4 pieces need to be glued together. Please order the pieces from plate 1 (top), to plate 4 (bottom). Filaments used Plate1: eSun eSilk - Gold eSun - Black Plate 2: eSun eSilk - Silver Plate 3: eSun eSilk - Copper Plate 4: eSun eSilk - Rose Gold The first piece is colored by layer, so a pause can easily be added for users without an AMS unit. Layer change on plate 1 is from Black to Gold is on layer 58 as shown in the image below. <img src="https://makerworld.bblmw.com/makerworld/draft/405556/2024-01-15_ed8f2f23629bd.png">  I hope this piece brings joy to you and your father!

I love you Dad

Padre

PrintMint

Bring the captivating beauty of Stormy Dreams into your living space with our DIY Wall-Mounted Cloud Night Light. Crafted for both simplicity and enchantment, this unique night light assembly seamlessly combines a 3D printed Cloud and Lightning Plate with a battery-powered LED light, allowing you to create your own magical stormy scene on the wall.&nbsp;You can use any of the  Bambu LED strips in the BOM. The one i used is here:https://www.amazon.com/dp/B0C3LZR1FX?psc=1&amp;ref=ppx_yo2ov_dt_b_product_details

Stormy Dreams: Cloud Night Light w/ Lightning Bolt

Luces varias

jesus lopez norte

COMPRAR ILUMINACIÓN AQUÍ:<a target="_blank" href="https://s.click.aliexpress.com/e/_DE4xxNH" rel="nofollow noopener">https://s.click.aliexpress.com/e/_DE4xxNH</a>DESDE AQUÍ AMAZONAS:<a target="_blank" href="https://amzn.to/3Pb4ToJ" rel="nofollow noopener">https://amzn.to/3Pb4ToJ</a>ARCHIVOS SVG EN MI PATREON:<a target="_blank" href="https://www.patreon.com/tecnoculebras" rel="nofollow noopener">https://www.patreon.com/tecnoculebras</a>VIDEOS EJEMPLOS MONTAJE AQUÍ:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=kBv0toEo-p8"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/kBv0toEo-p8" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=ojYDCwurv0k"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/ojYDCwurv0k" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>  correo de contacto: <a href="mailto:tecnoculebras@gmail.com" rel="nofollow">tecnoculebras@gmail.com</a>

dragon ball lightbox

Dragón ball

3DEbroDesing

Lampara del escudo del Athletic Club Bilbao.Compuesto por tres piezas ( base, pie de lampara y tapa ). La base en uno de los lados es mas larga para poder colocar el nombre que se desee, también se incluye base sin nombre. Para una mayor estabilidad en una mesa imprimir 3 pies con un 100% de relleno para mantener una base firme. . Visitanos en Instagram o Facebook : @3d_Ebro.Design

Lampara Athletic Club Bilbao - Football lamp

Fútbol 

3Dacores

Introducing the Stitch Character Lightbox – a delightful and whimsical addition to your living space!This enchanting lightbox features the lovable Stitch character, known for his mischievous yet endearing antics.&nbsp;The vibrant colors and intricate design of Stitch come to life when the lightbox is turned on, creating a playful and inviting atmosphere in any room.&nbsp;Whether you&#39;re a fan of Disney&#39;s Lilo &amp; Stitch or simply adore quirky and charming decor, this lightbox is sure to capture your heart.Its compact size makes it versatile, fitting seamlessly on shelves, desks, or bedside tables.&nbsp;The soft glow emitted by the LED lights adds a touch of warmth to your surroundings, making it an ideal companion for cozy nights or creative moments.&nbsp;Bring a touch of magic into your home with the Stitch Character Lightbox – a unique and captivating accent that will surely spark joy and nostalgia. Embrace the enchantment and let Stitch brighten up your space in the most delightful way possible!&nbsp;<blockquote>Disclaimer: The use of the logo or character in this design is for illustrative purposes only and does not imply endorsement or sponsorship. All trademarks, logos and characters are the property of their respective owners. Any reference to specific brands is not intended to infringe upon or challenge the ownership rights of the trademark holders. I respect the intellectual property of all brands and/or charactes mentioned in this design. If you think this design infringes on the ownership rights of the trademark, please submit a copyright complaint, and this design will be removed immediately.</blockquote>

Stitch Lightbox | LED Lamp | AMS only 4 colors 

Stitch

shawn.mek

My son requested some wolverine claws, and since I had just printed a print in place spring box I was like ‘I bet we could make some claws spring loaded!’&nbsp;Famous last words…&nbsp;Fortunately (or unfortunately?) the spring idea proof of concept worked immediately:<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-13_5780d7bc20069.gif">&nbsp;So we were off! And then a billion iterations later, we get to this first release version.&nbsp;It's a bit tricky to assemble, but I'll try to get some how to's in the future if needed. Please leave feedback on what I might do to enhance it - or let me know points of failure that I can strengthen.&nbsp;Thanks!&nbsp;For Assembly, you may want to watch this youtube where Uncle Jessy successfully assembles it (<a target="_blank" href="https://youtu.be/PM3DsiuDIDw?si=Ku4l55NfCI200hou" rel="nofollow noopener">https://youtu.be/PM3DsiuDIDw?si=Ku4l55NfCI200hou</a>). &nbsp;HAND STRAP - This was for my son, and I actually tried using the Polycam photogrammetry app on my phone to 3D scan his hand, and then made the strap using that :). It worked suprisingly well for HIS hand. I scaled up the strap for bigger hands, but you can also cut or delete a piece to make it bend and fit different sizes.&nbsp;&nbsp;ASSEMBLY&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_a7a31b9c9d4a4.jpg">&nbsp;The brake.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_2e8e8b3f94888.jpg">Stick the ‘trigger’ down through the brake sideways and then turn it (somewhat gently, don't break :))<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_034ac41c92e4e.jpg">&nbsp;Put the springs into the brake<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_23fc35f069994.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_0a283aa1fd7bc.jpg">&nbsp;TRICKY PART -No to putting the brake on this way (it won't have enough space to release):<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_ecf791bfd8bc5.jpg">Put it on the other side (I've never had to glue, but tolerances may necessitate that - the mechanism itself actually holds it together pretty well regardless), and then stretch/pull it over to the front (the springs will now have arm length and springiness for the brake mechanism):<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_d14067333d86c.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_1106349f4ddcc.jpg">Now put the claws through while holding the brake out of the way. Depending on tolerances you may need to move the claws in and out of the guides to break it in:<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_1479d7245892c.jpg">Snap the springs into claws and top plate, and then top plate into bottom plate:<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_0c259e60d24bd.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_a30a3d439e271.jpg">Pull down brake and pull out claws, slip strap around extended claw spring and onto the assembly:<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_d40f2a0eb72e9.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_0233270d2b7b3.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_aebe1855448f5.jpg">&nbsp;&nbsp;

Wolverine Claws - Retractable, Spring-loaded, Trigger (No extra non printed parts needed)

cosplay 

FilliFuu

UPDATED / FIXED VERSION FOR PEOPLE WITH PRINT PROBLEMS, ALL FILES AND DESCRIPTION NOW UPDATED 12/02/24Basic profile containing over 9 sizes, new improved links and lock, easy to print with no bridges in the links.&nbsp;This is the standard, non dragon or unicorn bracelets, completely new and improved, with new facial designs, link design and lock design, optimized for silk and strength so print in any colour you wish.&nbsp;Any issues or you wish to learn more then please don't hesitate to ask.&nbsp;To use the link, click in 5 times to soften the joint before attaching to the wrist in order to understand how the bracelet holds.&nbsp;Dragon & Unicorn available on my patreon, link on my profile page.&nbsp;<h2>3D PRINTING SETTINGS</h2>0.3 wallDetect thin walls on 0.2 layer height no brim (unless poor adhesion} no supports gyroid infill 25% 3 walls everything else as standard

Basic Flexi Silk Bracelets  - Updated

pulseras

christofer.jh

The one ring, need I say more?&nbsp;Hang on the wall or just put it on a table. The ring is a whole 160mm in diameter!&nbsp;I printed with Bambu PLA silk - Gold.&nbsp;<h2>Current version 2.0 - Now better shine!</h2>Warning, the new back plate is much more secured when inserted. Make sure led is installed before closing.&nbsp;The assembly is easy, just take about 50cm led strip and put it in the ring, like this:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163169/design/2024-02-14_9d0f0db27d1.jpg"></figure>Or alternative slide it in above the internal “bride”, this way you can get two loops for more light.&nbsp;Holder remixIf you want a stand take a look at this remix: <a target="_blank" href="https://makerworld.com/en/models/467240#profileId-376287" rel="nofollow noopener">https://makerworld.com/en/models/467240#profileId-376287</a><h3>Revisions:</h3>v 2.0Total redesign of the inner space of the ring and the back plate. The led strip is now held in place which gives a more uniform shine. Slightly bigger radius on the top of the ring.The back plate also snaps to the ring better, DON&#39;T PUT ON UNTIL LED IS INSERTED.v 1.1<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163169/design/2024-01-30_7d6ab2acdbc06.jpg"></figure><ul><li>Added a optional back plate that snaps in place. Use the chord for hanging on wall, or drill a hole for a nail (or use bambu studio and add a hole)</li></ul><figure class="image image_resized" style="width: 23.9%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163169/design/2024-01-31_2e6cf6cbfd73d.jpg"></figure><figure class="image image_resized" style="width: 24.71%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163169/design/2024-01-31_e9eca6e2a85f3.jpg"></figure>

The one ring - The Lord of the Rings

Señor de los anillos

Wickieprints

I made this awesome One Piece Keychain. Use AMS for multicolor. Enjoy.&nbsp;You can sell our designs we made and are available on our makerworld page. Wit a small sub on our Patreon you get a commercial license to sell and back our non profit founding for Children with special needs: <a target="_blank" href="https://www.patreon.com/wickieprints/posts" rel="nofollow noopener">https://www.patreon.com/wickieprints/posts</a>

One Piece Keychain

One Piece

pct.foros

Smart Materials. Cardboard spool ring adapter for Bambu Lab AMS

Smart Recycled. Cardboard Spool Ring Adapter for Bambu Lab AMS V1

adaptadores

Coat Over

A full set of radius-gauges from 2 to 16 mm in 0.5mm steps, quickly to print. Also a fully customizable OpenScad-file for you to create your own gauges. Open it in OpenScad* or easier in the customizer of Makerworld**. You can also use one of the browser versions of OpenScad*** and change the parameters to your liking.  &nbsp;Create in Inches: Same Gauges in Inches, see: <a target="_blank" href="https://makerworld.com/en/models/137615" rel="nofollow noopener">https://makerworld.com/en/models/137615</a>&nbsp;If you make your own set of gauges, please put them here as a profile so we can both enjoy them. Happy Gauging :) *More information about the fantastic and challenging program OpenScad can be found here: <a target="_blank" href="https://en.wikibooks.org/wiki/OpenSCAD_User_Manual" rel="nofollow noopener">https://en.wikibooks.org/wiki/OpenSCAD_User_Manual</a>| You can download the free and opensource OpenSCAD here: <a target="_blank" href="http://www.openscad.org/downloads.html" rel="nofollow noopener">http://www.openscad.org/downloads.html</a>&nbsp;**You can use the customizer of Makerworld by pressing the “Customize” button and select the Scad-file. Change the parameters, press “Generate” and if you like what you see press “Download”. ***You can also try a webbrowser version without installing anything. Like: <a target="_blank" href="https://openscad.cloud/openscad/" rel="nofollow noopener">https://openscad.cloud/openscad/</a> . Copy the code in the scad-file and paste the code at the left side in the browserversion of openscad. Open the customizer and have fun.

Radius Gauges in MM - A Set to print or customize

herramientas

YelTrik Designs - Click FOLLOW

The Snap-In-Place Release Button&nbsp;Finally a PTFE tube release button for the AMS Hub that stays in place after removing the tube! Thest buttons snaps into the AMS Hub Housing, making it very simple to remove the PTFE filament tubes from the AMS Hub. No more searching for that lame release tool!&nbsp;<a target="_blank" href="https://makerworld.com/en/u/1072890529" rel="nofollow noopener">Click here to check out other PTFE accessories</a>

AMS Hub PTFE Release Buttons

Bambu

Nico91

<h2>Nintendo Super Mario Logo Lightbox.</h2><h2>Border is an own object. Choose your favorite color.</h2><h2>For best results use this profile.</h2>Bambu Studio Settings1. First Layer Flow Ratio: 1.08. (Developer settings). 2. Wall generator → Arachne. 3. Set Quality → Wall transitioning threshold angle to 50º. 4. In Strength → Advanced, adjust Infill/wall overlap to 20% to 25%. 5. Quality → Advanced → Activate "Avoid crossing walls." 6. Order the colors from the lightest to the darkest.7. First layer speeds, 30mms and 60mms for first layer infill.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/321645/2023-12-28_4e5a1bcd7323c8.png"></figure>

Nintendo Super Mario Logo Lightbox LED Lamp

carteles

Pip3D.

Super Mario Characters LED LAMP

Mario bros

Powerpill.prints

<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000136252/design/2024-01-11_20b8ff51573d5.png"> This pack has been all set up for super simple and easy printing with the AMS or AMS lite!All the models are set to 2 - 4 Colours! Just load your filament, slice and go!<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you enjoyed these keychains, please consider boosting to support the creator. Thank you!</boostcontent></boostme>Most keychains take between 30 minutes to an hour to print! The Wall art takes a little under 3h! This pack includes the following Characters: Raccoon Mario, Tanooki Mario, Frog Mario, Super Mario, Tanooki Statue, Kuribo&#39;s Shoe, Bowser, All 7 Koopa kids, Goomba, Piranha Plant, Angry Sun, and a Thwomp! Extra Items include:Two Question Blocks, a Coin, The Warp Pipe, a cloud and large Mushroom Wall art!Check out my other video game keychain packs here:  <figure class="table"><table><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/162397#profileId-178258" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000136252/design/2024-01-29_ca2f6c28ed6ef.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/162397#profileId-178258" rel="nofollow noopener">Kirby Keychain Pack</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/197958#profileId-218564" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000136252/design/2024-02-29_63a9c7e60eb5.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/197958#profileId-218564" rel="nofollow noopener">Nintendo Classics Keychain Pack</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/128878#profileId-139600" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000136252/design/2024-01-29_c6b1251ef82d6.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/128878#profileId-139600" rel="nofollow noopener">Undertale Keychain &amp; Wall Art Pack</a></td></tr></tbody></table></figure>All models have been test printed on the A1 Mini with the AMS Lite!<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000136252/design/2024-01-11_89eefeae32d2.png">I have this set to use the 0.4mm nozzle with a .28mm layer height. This prints three layers of colour so the colours turn out nice and saturated and minimize waste. After the colour, there&#39;s one solid black layer, three layers of infill, and four final solid layers for the back for strength with the back pattern set to Hilbert Curve for a nice texture. There is a small hole in each model which is just large enough to fit a 1mm keychain jump ring. If you find it too small, you can modify the size of the “Keychain hole” object in BambuStudio to make it a little larger, or take a small drill bit and drill the final keychain to make it a little bigger!&nbsp;I purchased my <a target="_blank" href="https://www.amazon.ca/gp/product/B07DC9YZXV/" rel="nofollow noopener">keychain set from Amazon</a> if you&#39;d like to get something similar!<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000136252/design/2024-01-11_5a152f566c097.png">All models have been flipped face down on the print bed so the surface texture from the PEI plate gives them a nice textured surface! All the different pieces of the models are there if you want to play around with it. There is one black ‘back’ piece in each keychain, which is perfectly aligned to the rest of the model. This causes some flickering in the viewport when moving around, but it disappears after slicing. If you modify the settings of that piece, it will affect the infill settings, so if you want to save a little filament, feel free to adjust it there!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000136252/design/2024-01-12_a95d546734b92.gif"></figure>I made some changes to the first layer and first layer infill speeds, reducing them both by about half. This increases the print time for the first layer, but increases the bed adhesion and print quality a bit. If you find that the first layer is printing too slow for your liking, feel free to reset them both back to default settings in the speed tab.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000136252/design/2024-01-12_bf1f2da44885a.png"></figure>If you want some extra crisp pixels, you can try printing these with the 0.2mm nozzle, but I didn&#39;t think the increased print time was really worth the extra quality. It&#39;s definitely noticeable, but I didn&#39;t think the tradeoff was there. Feel free to experiment and try it yourself!<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000136252/design/2024-01-11_499753cc971ff.png">Want to remove the keychain hole? No problem! Each keychain has a “Keychain hole” object on each plate. Just select it, delete it, and re-slice!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000136252/design/2024-01-12_b03c4f163cd0b.gif"></figure>Want to scale these up really large to make some wall art? Just delete the “Keychain hole” object, then scale the X and Y axis to fit your print bed. Keep the Z-Scale back to 3.08mm so you&#39;re not printing extra layers though!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000136252/design/2024-01-12_ad2d6a9495777.gif"></figure>If you notice any settings that could be changed or improved, please let me know! I&#39;d love to make any adjustments necessary so they all print great! If there&#39;s any other packs or characters you want to see, leave a comment! Let&#39;s a go!! Like this pack? Check out my other Pokemon keychain packs here:<figure class="table"><table><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/121800#profileId-131121" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000136252/design/2024-02-07_dc330ce646168.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/121800#profileId-131121" rel="nofollow noopener">Pokemon Keychain Pack #1</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/144042#profileId-156624" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000136252/design/2024-02-07_0a2962a7126e5.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/144042#profileId-156624" rel="nofollow noopener">Pokemon Keychain Pack #2</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/172935#profileId-189959" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000136252/design/2024-02-07_358b5b8be1e3a.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/172935#profileId-189959" rel="nofollow noopener">Pokemon Keychain Pack #3</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/177083#profileId-194702" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000136252/design/2024-02-26_3bc2fc5b971f6.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/177083#profileId-194702" rel="nofollow noopener">Pokemon Keychain Pack #4</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/213311#profileId-232885" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000136252/design/2024-02-29_2d186746f8aae.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/213311#profileId-232885" rel="nofollow noopener">Pokemon Keychain Pack #5</a></td></tr></tbody></table></figure>

Super Mario Bros. 3 Keychain Pack - Mario, Bowser

Llaveros

Hába97

BMW GS Keychain 1150/1200

Sevro

OverviewAn ethereal and light statue that shows love in artish style.&nbsp;I found that picture on internet as a tattoo on somebody arm and I had to bring it to the world of 3d printing. I recreated and changed it a bit so that it could be printed and presented properly. I don&#39;t know who is original author of this drawing.&nbsp;InstructionPrint and put in bottom base to achieve vertical pose, no glue is needed.To print it, there is need good adhesion to bed.Upper end of sculpture is bond with initial printer starter extrusion. It prevent roll up this section of model. Cut it after print.&nbsp;Update:17.12.23 version 2I made thicker version 2 mm so statuette is more rigid. Previous one 1 mm was too weak and flexible.19.12.23 version 3I changed a little design so it is yet more rigid and does not bend over time.09.01.23 version 4I added alternative larger base to second plate, because some users in comments section said that default base is too weak.

Ethereal Kiss Statuette

Amor

Forest87

This is my personal orange peeler, inspired by other similar product and entirely redesigned! Simplified design with the addition of the Bambulab logo.

The Orange Peeler

Cocina

FlorinV

Please share your make and let me know your opinion about this model. Thank you and have a great week !&nbsp;Update 11.03.2024: Added “Skull" lid. There is an optional profile for printing this lid. <a target="_blank" href="https://makerworld.com/en/@timon1201" rel="nofollow noopener">@timon1201</a> did a similar lid and gave me this idea. thanks !&nbsp;Update 29.12.2023: Added “Pine cone” lid. You can find it in the Optional Lids profile. The lid has fine details, please be sure your printing plate is clean (no finger grease etc.).&nbsp;The Automatic Toothpick dispenser:<ul><li>All parts are 3d printed, all in one plate. No AMS needed.</li><li>Several Lids to choose from and a clean lid to customize it as you wish. “Voronoi” and “Yoda” lid are found in the model profile. Other optional lids will be added to the “Optional Lids” profile.</li><li>Each part easily fit together. Please check the short building video bellow. ( 1min 30sec minutes to build )</li><li>works with toothpicks of max 66mm and approx. 2mm diameter (normal toothpicks I've found ). Please shake the dispenser to arrange the toothpicks correctly and parallel. Throw away toothpicks that look too different than normal ones: damaged, askew.</li><li>The two arms that hold the big parts together have printed on them L and R, to be sure you set them correctly (left and right).</li><li>The 3d printed spring should be inserted like in the video, first on the back with the other end up, then the front.</li></ul><figure class="image image_resized" style="width:30.4%;"><img src="https://makerworld.bblmw.com/makerworld/draft/682841/2023-12-14_9977d673e0c9a.png"></figure><ul><li>Second spring is optional (the left one). After some use, it will work smoother, as the parts needs some time to slide easier one on each other. From my experience, the right spring is enough, but feel free to play around.</li><li>If some of the toothpicks are thrown, it means some of them are a bit too thin. You can dispense them better by releasing the push pad slower. :)</li><li>If at some moment it stops from giving toothpicks, it can happen that the feeding zone is blocked by two toothpicks (usually because some toothpicks are smaller/bigger, damaged, askew etc). It's easily fixed by shaking a bit the whole model and/or press harder on the push part.</li><li>The parts are finely designed to work together, so I suppose it's important to have a good filament and calibrated. Please use my tested profile.</li><li>You can choose from two different lids (in the main profile, more lids in a separate profile - Optional Lids). The “Yoda” lid is a separate plate as it's using AMS and 2 colors.  You can print it without AMS and leave empty space in the lid where letters and Yoda is (don't print the letters and Yoda).</li><li>I've added another profile (For Thinner Toothpick - only base part) containing only the base part for cases where your toothpicks are often flying out of the dispenser. This is usually a problem related too thin toothpicks. This part is only the base part which should handle such toothpicks.</li><li>Based on the review of eric.joschko (thank you!!), he scaled everything to 108% and everything works perfect for he's toothpicks which i understood they are 68mm length.</li><li>Based on review of Sven_fretz (thank you!!): “scaled everything up to 125% and it works fine with my 80mm toothpicks.”</li><li>For better spring action and to be sure they keep their power better in time, you can print only the springs with PETG.</li></ul>This is the building video (1min 30sec minutes ): <a target="_blank" href="https://youtu.be/BJucPYljE2o" rel="nofollow noopener">https://youtu.be/BJucPYljE2o</a><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=BJucPYljE2o"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/BJucPYljE2o" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;If you like this model, please check out my new Salt & Pepper dispensers: <a target="_blank" href="https://makerworld.com/en/models/228050#profileId-245632" rel="nofollow noopener">https://makerworld.com/en/models/228050#profileId-245632</a><figure class="image image_resized" style="width:56.68%;"><img src="https://makerworld.bblmw.com/makerworld/draft/682841/2024-03-06_0e2805d6f36fc.jpg"></figure>&nbsp;Or, my fun and easy to print, easy to use filament cutter: <a target="_blank" href="https://makerworld.com/en/models/137257#profileId-149353" rel="nofollow noopener">https://makerworld.com/en/models/137257#profileId-149353</a><figure class="image"><a href="https://makerworld.com/en/models/137257#profileId-149353" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/682841/2024-01-15_0a30aa152023c.png"></a></figure>&nbsp;Disclaimer: YOU ACKNOWLEDGE, BY YOUR USE OF MY MODELS, THAT YOUR USE OF THE MODELS IS AT YOUR SOLE RISK.<h2>LIMITATION OF LIABILITY</h2>UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL OR EQUITABLE THEORY, SHALL THE DESIGNER OF THE MODELS BE LIABLE TO YOU OR TO ANY OTHER PERSON FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL LOSSES OR DAMAGES OF ANY NATURE ARISING OUT OF OR IN CONNECTION WITH THE USE OF OR INABILITY TO USE THE MODELS OR 3D PRINTED MODELS.

Toothpick Dispenser - all parts printed

varios

franceschellifederico

Inspired by <a target="_blank" href="https://www.thingiverse.com/thing:3130078" rel="nofollow noopener">this</a>, I redesigned it from scratch.Unleash the power of sound with this meticulously crafted 3D model of a high-powered whistle! Perfect for summoning attention or signaling in various situations, this design embodies both functionality and elegance. Whether you're an enthusiast, an adventurer, or simply someone in need of a reliable whistle, this model promises clear, piercing tones and easy printing. Share the joy of creating sound in your projects by downloading and printing this whistle from MakerWorld today!

Loud Whistle v1

silbato

Print4Gods

i Love Minions so i must mix it for the bambu lab amsbest to print with tree support and 4 Colours Thx <a target="_blank" href="https://www.printables.com/de/@_Building_Arts_" rel="nofollow noopener">@_Building_Arts_</a> for the great ideaI've improved the print bed adhesion for a perfect print

Minions Figure Miniatures

minions

mail.iou

The decoration above the door adds to the Christmas atmosphere.This requires 2 colors or more of filament, you can mix and match your own colors.&nbsp;Profile1: Predefined black and white filaments.Profile2: Predefined filaments of 4 colors: black, white, red and green.

Door Corner - Christmas

Navidad

maddijoyce

The hook for the parcel shelf on my BMW x1 broke, so I made a new one. &nbsp;The existing hook is directly attached to the string, so I made this one so that you can cut the string, thread it through the hole at the bottom of this hook and tie a knot to hold it.

BMW X1 Parcel Shelf Hook

Coche

Scattered Collectables

Ornamental Pokeball modelSimple print, supports not necessary but can help bridging. Glue the parts together or leave the top unglued so you can open it and put something insideThe outer ring is optional, the part just slides over and can be held on with glue&nbsp;Join my patreon for the right to sell physical prints https://www.patreon.com/ScatteredCollectables

Ornamental Pokeball

Pokemon

m.cody.sims

Just a good Mando helmet!&nbsp;My profile doesn&#39;t have support on the inside of the helmet because I have found it didn&#39;t really help that much with the quality and it used a lot of filament. the very center of the inside will be rough because of this but it hasn&#39;t been an issue for me.&nbsp;For those wondering what I use for a face sheild I use a Hobart 770580 Face Shield Replacement Lens, Shaded from Amazon. I cut it to shape and use a little bit of hot glue along the front and near the temples. That seems to be enough. I would recommend getting air soft helmet padding for a custom fit and comfort.&nbsp;If you like my work, please consider supporting me by boosting my model or <a target="_blank" href="https://www.buymeacoffee.com/m.cody.sims" rel="nofollow noopener">buying me a coffee</a>!

Mandalorian Helmet One Piece

Cascos

buchwieserleo

I split this into 3 parts: The clamp itself, a nut and a bolt.I recommend printing the nut and bolt at lower layer heights for cleaner overhangs and a better fit. I used 0,12mm. I also scaled down the bolt to 99% in x and y In the slicer. Do not change z scale, as this affects the pitch and wouldn’t fit into the nut anymore.The clamp is designed to be printed on its side, the cable canal facing downwards. no supports are needed, holes are teardrop shaped, which works pretty good. I used PETG, 3 perimeters and 15% cubic infill. I designed the hole for the apple charger with a clearance of 0,2mm in diameter. If you need changes to this, im happy to do so. For Maximum table thickness is ~44mm. I can provide a longer bolt in the future for really thin tables.I'm happy to implement changes, if you have any requests. EDIT 29.06.2023:-added Bolt versions _45mm and _55mm, which make the original clamp work with thinner tables (min. 0mm for the 55mm version)-added clamp version for thinner tables (clamp opening 30mm vs. original 45mm)&nbsp;

Apple Watch Clamp

Apple

LordBoos

Scary Halloween Mansion - HueForge.<h4>Printing instructions:</h4>Filament swaps ONLY, no MMU or AMS required, but AMS makes it much easier.Use Original HueForge profile to get the intended look, my models are very sensitive to print settings because of color blending between layers. Every setting and filament changes for AMS are carefully prepared and fine-tuned in the Original HueForge print profile, feel free to change colors, but I recommend not to adjust other settings. If you want to experiment with your own settings or non-original print profiles, for best look print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mmYou can use same filaments as I did, or you can experiment with your own.Don't forget to upload a make!<h4>Filaments Used:</h4><ul><li>PLA BambuLab Basic Black Transmission Distance: 0.6</li><li>PLA BambuLab Basic Blue Gray Transmission Distance: 3</li><li>PLA Gratkit Gray Transmission Distance: 1</li><li>PLA BambuLab Basic Jade White Transmission Distance: 4</li></ul><h4>Swap Instructions:</h4><ul><li>Start with Black</li><li>At layer #20 (1mm) swap to Blue Gray</li><li>At layer #35 (1.6mm) swap to Gray</li><li>At layer #38 (1.72mm) swap to White for the rest.</li></ul>

Scary Halloween Mansion (Filament Painting) - HueForge

Hallowen

Chris Pirillo

In a distant corner of the galaxy, far removed from the battles and conflicts that defined his life as Darth Vader, the Sith Lord nurtured an unexpected and secret passion—building 3D printers. This peculiar hobby, hidden away in the recesses of his vast fortress on the volcanic planet of Mustafar, was a testament to the multifaceted nature of the dark figure behind the black mask.&nbsp;Vader's journey into the world of 3D printing began with a quest for perfection. As a Sith Lord, he demanded precision and exactitude in every aspect of his existence. It was this quest for flawlessness that led him to study the intricacies of 3D printing technology. He dissected existing machines, pored over schematics, and tirelessly experimented, channeling the same determination that had driven him to the pinnacle of the dark side.&nbsp;Over time, Vader designed his own custom 3D printers, each a masterpiece of engineering and precision. These machines were like extensions of his own mechanical limbs, responding to his commands with unparalleled accuracy. With a wave of his hand, he could manipulate the Force to enhance their capabilities, producing objects of extraordinary craftsmanship.&nbsp;In his secret workshop, bathed in the crimson glow of Mustafar's molten rivers, Vader crafted more than just objects. He created intricate Sith artifacts, imposing statues of himself, and even delicate sculptures of Padmé Amidala, his lost love. Each creation was a reflection of his complex emotions, a silent testimony to the inner conflict that still raged within him.&nbsp;While the galaxy knew Darth Vader as a symbol of fear and darkness, in the solitude of his workshop, he was an artist, a creator, and a perfectionist. Building 3D printers allowed him to channel his obsessive nature into a pursuit that, for a brief moment, offered him a sense of peace amidst the chaos of his existence. It was a hidden aspect of Vader's life, a sanctuary of creation where he found solace and a semblance of the man he once was, before the dark side had consumed him completely.&nbsp;Sliced at .08mm layer height: <ul><li>Black to layer 7</li><li>Silver to layer 11</li><li>Muted Blue to layer 17</li><li>Cream to top layer</li></ul>

Star Wars (Inspired) "Sith Schematics Blueprint" HueForge Darth Vader Wall Art

Star Wars

Jorge Rui

First of all, I wanted to write something about my previous work, which is what brought me here.Following the Bamboo "<a target="_blank" href="https://www.printables.com/model/537144-bambu-lab-tools-and-accessories-box" rel="nofollow noopener">Lab - Tools and Accessories Box</a>" and after its unexpected success, I would like to thank everyone, without exception, for their support and kind words.<blockquote>I printed the thing in ABS. In fact, it's amazing that e.g., the hotends, cutters, wipers etc. fit so well _despite_ being printed in a material that isn't dimensionally stable. All in all, stellar job! <a target="_blank" href="https://www.printables.com/@jonas_303917" rel="nofollow noopener">@jonas_303917</a></blockquote><blockquote>I might play around with modeling the inserts, but my skill are pretty lacking. Your skills are off the charts. The fit and finish is extraordinary. I am sure lots will use it. <a href="/@JeffreyCompt_1114907" rel="nofollow">@JeffreyCompt_1114907</a></blockquote><blockquote>Really fantastic print, aesthetically pleasing build and helps keep spare parts tidy and organised. Was super simple to print due to the included 3mf file which orientates everything for you and gives you the correct slicer settings. The only change I made was to use tree supports as I love them for their many benefits. Didn’t have any issues with the handle, printed great. Thank you! <a target="_blank" href="https://www.printables.com/@Daniel_404952" rel="nofollow noopener">@Daniel_404952</a></blockquote>and the all-time best:<blockquote>Damn this is sexy. <a target="_blank" href="https://www.printables.com/@BenSreRsf_328430" rel="nofollow noopener">@BenSreRsf_328430</a>like from star trek :) <a target="_blank" href="https://www.printables.com/@SametMuric_392192" rel="nofollow noopener">@SametMuric_392192</a></blockquote>But I was especially attentive to the suggestions and criticisms of the whole community. One of those things was the printing time, yes it was long, especially when done all at once.<h4>What I bring is new…</h4>Now regarding this project, this will be made available in different modules, each one adding to the previous one. This is the first, the most basic, but probably the most flexible.You can find similarities with other modular systems, especially in this case those more industrial, since that is my professional background. And believe me, there are many…<h3>The Frame</h3>It will start with the frame. It will help to organize and keep the modules fixed relative to each other.<figure class="image image_resized" style="width:75%;"><img src="https://media.printables.com/media/prints/556159/rich_content/98ac3e34-ccde-4b35-b49b-a1427dd0d3af/wall-frame.jpg#%7B%22uuid%22%3A%2282d1d52d-eb69-4eba-9a1e-04c796c8ba20%22%2C%22w%22%3A966%2C%22h%22%3A911%7D"></figure>The size of it can be what you want, places one next to the other like a tile. It can fill a wall and go forever. (It looks nice on the wall)<figure class="image"><img src="https://media.printables.com/media/prints/556159/rich_content/d9fb0ba4-ce50-4e78-8925-15c58ae33e85/wall-frame-tile.jpg#%7B%22uuid%22%3A%22d1f7ba8c-b8ba-4580-9ea3-3079609757b2%22%2C%22w%22%3A1487%2C%22h%22%3A1080%7D"></figure>If you opt for wall mounting, there are two forms of fixation: the normal one for "normal" loads, and another, for a more robust fixation needs.<figure class="image image_resized" style="width:75%;"><img src="https://media.printables.com/media/prints/556159/rich_content/a8914e3a-2717-4a47-99b4-1191cb1e5529/wall-frame-fixation.jpg#%7B%22uuid%22%3A%228a098261-3c43-490c-b53e-ed3c1b04a347%22%2C%22w%22%3A1345%2C%22h%22%3A1080%7D"></figure><h4>All-Stars</h4>As you can see in the above image, the connection is made with the stars in red. They will be the ones that will serve as an interface with the modules. This allows a correct spacing between modules, as well as their fitting, both horizontal and vertical.<ul><li>You have 2 types of stars, some for the base, thicker, and others for the top, thinner.</li><li>The ones you see half the size can be used on the frame edges but, only if you fill like it's necessary.</li></ul><figure class="image image_resized" style="width:50%;"><img src="https://media.printables.com/media/prints/556159/rich_content/62a04e2e-e664-4952-9436-6c3be9717a9b/start_types.jpg#%7B%22uuid%22%3A%229856da7c-76f0-4221-be4d-2a81ecd5bc22%22%2C%22w%22%3A661%2C%22h%22%3A530%7D"></figure><h4>Many possibilities …</h4>In addition to the wall, you can store your modules inside a drawer, so as not to pick up dust, or in a tool cabinet to store the drills by size.<figure class="image image_resized" style="width:75%;"><img src="https://media.printables.com/media/prints/556159/rich_content/f5fb5c9f-0683-4577-aff6-31235566c524/img_0789.jpeg#%7B%22uuid%22%3A%220773fee3-5684-41da-8fe3-d4a13460e637%22%2C%22w%22%3A3274%2C%22h%22%3A2669%7D"></figure><ul><li>Currently, optimized for Bambulab printers, if there is interest, I can do for other print bed sizes, (like PRUSA, Creality and others).</li></ul><h3>The blocks</h3>Blocks are volumes that you can use to place your things. There is a base one, which is the smallest block you can see on the image, all the others are multiples of them, don't worry about the <a target="_blank" href="https://www.harveyperformance.com/in-the-loupe/best-practices-of-tolerance-stacking/" rel="nofollow noopener">stacked tolerance</a>, I've already worried about it for you... otherwise, if you don't know what it is, even better ;)<figure class="image"><img src="https://media.printables.com/media/prints/556159/rich_content/769de2de-3d2c-4b8f-8755-952491457586/simples-blocks.jpg#%7B%22uuid%22%3A%22eeb5ab8d-e765-45b7-880a-1a5cd7bacc76%22%2C%22w%22%3A1920%2C%22h%22%3A1080%7D"></figure>When using the frame, together with the blocks, the combinations are endless, and you don't need to fill all the empty spaces.If you need need more blocks use this this link to download an app that will allow you to choose between does that are compatible with MMSS:<a target="_blank" href="https://drive.google.com/file/d/1kBbi6jkH3Bw8JuELBMyMwSw9vEwBuJDe/view?usp=share_link" rel="nofollow noopener">Tool to extract all the blocks</a><ol><li>Download</li><li>Install </li><li>Select the attachment icon and choose the block, or blocks with the size you need from the list</li><li>The click, “Extract attachment”</li></ol><blockquote>A Step file will be available for you to start modeling your custom module. This features all the sizes available for the MMSS. Other sizes will not fit. Other geometric formes besides squares and rectangles are possible (Example ‘L’ shapes" for that you may use Boolean operations with the basic blocks.</blockquote><h4><img src="https://media.printables.com/media/prints/556159/rich_content/976ede5e-5253-4268-9bee-623a9e14bb11/captura-de-ecra-2023-08-15-as-150848.png#%7B%22uuid%22%3A%225053f23f-cb98-4e63-b6f4-10868e5883c6%22%2C%22w%22%3A3226%2C%22h%22%3A1816%7D"> </h4>In a wall configuration, you can make the modules thinner or thicker, and even stack them on top of each other, thus, getting a very flexible solution.<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://media.printables.com/media/prints/556159/rich_content/9b106500-aac3-487c-accb-47616fecbd96/stack-modules-front.jpg#%7B%22uuid%22%3A%22e716869a-d32f-4594-a9ab-2b7ca21f83a2%22%2C%22w%22%3A965%2C%22h%22%3A1080%7D"></figure></td><td><figure class="image"><img src="https://media.printables.com/media/prints/556159/rich_content/dfca711b-551f-45be-870c-9b08e7a05a4e/stack-modules-lateral.jpg#%7B%22uuid%22%3A%2229201637-4e90-4c55-92f8-95f8b21e568d%22%2C%22w%22%3A693%2C%22h%22%3A1080%7D"></figure></td></tr></tbody></table></figure>Just an idea: this option needs a reinforced component due to the torque moment generated in the fixing points. If you stack blocks, the ”shaft” has to go through all o them and fixed to a Strong wall "fix.step" element and bolted from behind. If Someone justifies the use of this, I can make this solution available here. <h4>Do you like simpler? </h4>In minutes, you will have the module you need. Keep it in a drawer, next to your machine, computer, wherever you want. <figure class="image image_resized" style="width:50%;"><img src="https://media.printables.com/media/prints/556159/rich_content/89cb3190-7f62-43b6-9eb8-de69bf89b43e/img_0788.jpeg#%7B%22uuid%22%3A%22dfffa446-3bf8-4760-bd45-762b7d1ab0df%22%2C%22w%22%3A2975%2C%22h%22%3A2343%7D"></figure>These simple shapes, with loose or fixed blocks, can be used as you wish and not only with tools or accessories for the 3D printer …The Boolean operation of subtraction, available in the slicer is your friend ;) You just need to have the template of what you want to use as a template.<figure class="image image_resized" style="width:50%;"><img src="https://media.printables.com/media/prints/556159/rich_content/887d258c-a7c9-49c1-9dab-707f3c6e2afc/glue-and-keys.png#%7B%22uuid%22%3A%22080cf7a1-d2e5-4c63-8a31-63329413d039%22%2C%22w%22%3A1920%2C%22h%22%3A1080%7D"></figure>You can create something very specific, like the tool holder above.<figure class="image image_resized" style="width:50%;"><img src="https://media.printables.com/media/prints/556159/rich_content/84b95e80-29b5-4cfe-8f4b-651fffdf8468/2x3-module-pocket-with-lid_open.jpg#%7B%22uuid%22%3A%22671eefca-4836-4a8c-88ca-02982deda636%22%2C%22w%22%3A1920%2C%22h%22%3A1080%7D"></figure>Or something more versatile, like this box with lid.But one thing is transversal to all the modules, the:<ul><li>Printing is simple, </li><li>on the material/color you want and </li><li>with the quantity you require.</li></ul>Example of application for a printer accessories and tools<figure class="image"><img src="https://media.printables.com/media/prints/556159/rich_content/91f257f6-1cf6-4ee9-ad4a-9b58c643653f/example-of-application-with-frame.jpg#%7B%22uuid%22%3A%2222721bf4-4096-4299-9d14-49d38cf6c56a%22%2C%22w%22%3A1920%2C%22h%22%3A1080%7D"></figure><h3>Print instructions</h3><ul><li>Do not use brims or supports, not needed. Other settings as you see fit. The included 3MF provides a good starting point.</li><li>The design, despite being simple, was thought out… At the dimensional level, there are adjustments with interference (slightly tighter). To ensure this, it is important to calibrate the material before printing, in the case of Bambulab printers it is important to calibrate the <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/extrusion-calibration" rel="nofollow noopener">k factor</a> and the <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/calibration_flow_rate" rel="nofollow noopener">flow</a> (this can be done with or without LiDAR sensor, the links will send you to bambulab official wiki). This is critical in “stars” components, they must be tight. </li><li>On other printers, I suggest using similar methods.</li><li>The stars have a slight taper, put them on the print bed in a way that the larger face is facing up. </li></ul>If you still have difficulties with fitting, the slicer scale command is your friend ;) but only use it in the stars.<h3>Assembly instructions</h3><ul><li>Insert parts until you ear 2 or 3 clicks (layers with interference), you can use your pliers point to help on this, or any other tools you find appropriate.</li></ul><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://media.printables.com/media/prints/556159/rich_content/9283d3db-5815-4ac8-8502-01aacc38f712/img_0791.jpeg#%7B%22uuid%22%3A%22f7d0c791-83d0-4d28-b139-c245a51264fd%22%2C%22w%22%3A2711%2C%22h%22%3A2542%7D"></figure>Note<ul><li>If you think the layout is final and that may be a definitive solution and/or need a strong bond, use an epoxydic glue like Araldite on the interface surface but not between modules. </li></ul><h3>Available Modules </h3><h4>Prepared housing modules for Bambulab 3D printers:</h4><ul><li><a target="_blank" href="https://www.printables.com/model/557566-mmss-2x4-module-glue-stick-and-hexagonal-keys" rel="nofollow noopener">MMSS 2x4 Module - Glue Stick and Hexagonal Keys</a></li><li><a target="_blank" href="https://www.printables.com/model/557452-mmss-1x1-module-microsd" rel="nofollow noopener">MMSS 1x1 Module - MicroSD</a></li><li><a target="_blank" href="https://www.printables.com/model/557397-mmss-1x1-module-nozzle-wipper" rel="nofollow noopener">MMSS 1x1 Module - Nozzle Wipper</a></li><li><a target="_blank" href="https://www.printables.com/model/557390-mmss-1x1-module-filament-cutter-microsd" rel="nofollow noopener">MMSS 1x1 Module - Filament Cutter + MicroSD</a></li><li><a target="_blank" href="https://www.printables.com/model/559405-mmss-1x2-module-hotend-and-silicon-sock" rel="nofollow noopener">MMSS 1x2 Module - Hotend and Silicon Sock</a></li><li><a target="_blank" href="https://www.printables.com/model/561092-mmss-1x3-module-complete-hotend" rel="nofollow noopener">MMSS 1x3 Module - Complete Hotend</a></li><li><a target="_blank" href="https://www.printables.com/model/561215-mmss-2x3-module-small-scraper" rel="nofollow noopener">MMSS 2x3 Module - Small Scraper</a></li><li><a target="_blank" href="https://www.printables.com/model/563010-mmss-2x3-module-pocket-with-lid" rel="nofollow noopener">MMSS 2x3 Module - Pocket with Lid</a><ul><li><a target="_blank" href="https://www.printables.com/model/563208-mmss-various-size-modules-pocket-with-lid" rel="nofollow noopener">Various sizes of pockets with lids.</a></li></ul></li><li><a target="_blank" href="https://www.printables.com/model/564616-mmss-2x5-module-liquid-glue" rel="nofollow noopener">MMSS 2x5 Module - Liquid Glue</a></li><li><a target="_blank" href="https://www.printables.com/model/580675-mmss-2x3-module-spool-holder" rel="nofollow noopener">MMSS 2x3 Module - Spool Holder</a></li><li><a target="_blank" href="https://www.printables.com/model/613965-bambu-lab-ams-service-and-spares-parts-for-the-mms" rel="nofollow noopener">MMSS for AMS Modules</a> <ul><li>4x Active extrusion wheel assembly;</li><li>4x Active support shaft assembly;</li><li>4x PTFE Tube Fast Connector;</li><li>4x Driven Support Shaft Assembly</li><li>1x First Stage Feeder</li></ul></li><li><a target="_blank" href="https://www.printables.com/model/557727-case-with-lid-for-mmss" rel="nofollow noopener">BOX with lid for MMSS</a></li><li><a target="_blank" href="https://www.printables.com/model/556615-case-for-the-mmss" rel="nofollow noopener">Case for MMSS</a></li></ul>More to come… I'm always adding new modules, please check <a target="_blank" href="https://www.printables.com/@jorge_rui" rel="nofollow noopener">my profile </a> and here on <a target="_blank" href="https://makerworld.com/pt/u/3059492201" rel="nofollow noopener">makerworld.com</a> for the later information, some are free, others are only available as exclusives for members of "<a target="_blank" href="https://www.printables.com/@jorge_rui/exclusive-models" rel="nofollow noopener">my club</a>".&nbsp;You can see in the context, with the specially designed <a target="_blank" href="https://www.printables.com/model/556615-case-for-the-mmss" rel="nofollow noopener">MMSS case</a><figure class="media"><div data-oembed-url="https://youtu.be/7BvKN2LLuL0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/7BvKN2LLuL0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>… and <a target="_blank" href="https://www.printables.com/model/557727-box-with-lid-for-mmss" rel="nofollow noopener">mmss box</a><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=KTnRSS5wA4w"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/KTnRSS5wA4w" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><ul><li> </li></ul>&nbsp;<h4>Office housing modules</h4><ul><li><a target="_blank" href="https://www.printables.com/model/563010-mmss-2x3-module-pocket-with-lid" rel="nofollow noopener">MMSS 2x3 Module - Pocket with Lid</a></li></ul><h4>Conclusion</h4>I just hope you like this as much as I do and understand the potencial of this.<h4> </h4><h3>Ideas for remixes </h3><ul><li>change the blocks to your needs.</li></ul><h3>Change log:</h3><ul><li>(19-08-2023) – Added a frame for smaller print bed sizes, like PRUSA Printers and other. (Framed_prusa.step). STEP files are more flexible and contains more information when compared to STL. Just drag and drop on the excellent PRUSA slicer, and you are good to go. ;)<ul><li>Added some more basic blocks.</li></ul></li><li>(24-08-2023) - Added modified start for does having difficulty assembling the stars that connect the base to the modules (the two-level stars). "Star_4P_frame_modified.step" and“Star_2P_frame_modified.step”. If you encounter this “problem” it is best to <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/calibration_pa" rel="nofollow noopener">calibrate your filament </a> instead of using this alternative files.</li><li>(14-10-2023) - Added some more basic blocks</li></ul>&nbsp;<h4>Support the designer:</h4>This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a target="_blank" href="https://www.buymeacoffee.com/designrepcom" rel="nofollow noopener">buymeacoffee </a>or <a target="_blank" href="https://www.paypal.com/donate/?business=BUM67EMDJRXSN&no_recurring=0&currency_code=EUR" rel="nofollow noopener">paypal, </a>or even better, join “My Club” here in printables.com, that will be greatly appreciated.

Multi-Modular Storage System -MMSS

ordenación 

Update: 08.10.2023I added base with holes for M3 Screws. Use it when pins in your standard Base not fit well or broke down when printed.&nbsp;OverviewI present my my ultimate plane launcher.Easy to print and assemble. You have to only fold you favourite paper plane, load, aim and shoot it to fly. You need to only 3 rubber bands to have fun with it. One small for trigger and two larger for launcher (one for each side). Launcher is projected to assembly without screws and glue but your clearence may be different than mine. If somewhere cover don't fit correctly simply use glue to fix cover to base. After proper assembly you won't have to look inside. Rubber inside handle, stays for very long. Mine didn't break yet. Rubber bands on launcher can be strech in three position depends on rubbers size and desired force.Warning: Shoot only with a loaded launcher. Shooting without a load can damage the "barrel". The occurrence of damage depends on the force of the rubbber bands.&nbsp;To print “base” and “trigger middle” use supports for rubber bands hooks. ( I often forgot about that but despite this prints went well )Below is simple schematic of assembly.<figure class="image image_resized" style="width:82.8%;"><img src="https://makerworld.bblmw.com/makerworld/draft/75491/2023-08-14_hnasrabhm0z0.jpg"></figure>&nbsp;To load correctly, the trigger must be in the up position. Often you have to set it with your thumb in the right position as in the video below&nbsp;Loading looks like that<figure class="image"><img src="https://media.printables.com/media/prints/415098/rich_content/7d798460-cad5-42ab-960a-c535ea28eb20/giphy.webp"></figure><figure class="image"><img src="https://media.printables.com/media/prints/415098/rich_content/c065fda1-dfa9-4596-a8ae-e78fc4bd9c7b/giphy.webp"></figure>And launching<figure class="image"><img src="https://media.printables.com/media/prints/415098/rich_content/8acfd9e7-f993-4ec8-970c-ed1d5692a655/giphy-2.webp"></figure>&nbsp;&nbsp;I designed small glider thar cooperate with launcher.It is available here:<a target="_blank" href="https://makerworld.com/en/models/16774#profileId-15557" rel="nofollow noopener">https://makerworld.com/en/models/16774#profileId-15557</a>and works like that:<figure class="image"><img src="https://media.printables.com/media/prints/415098/rich_content/74b00a80-1e55-4d9d-b0a8-ef45f0b99777/swift.gif"></figure>Have fun&nbsp;&nbsp;