Midomo

Jorge Rui

<h3>Introduction and contextualization</h3>A box for spools, I know there are many out there, but for those who already know me, they know that I like to do things my own way. So, I decided to make a box for the filament spools.  What is particular about it, you may ask:<ol><li>It must be closed and provide the best possible seal (I think I&#39;ve managed to do that)</li><li>Allow its production on the Bambu Lab X, P and A1 printer&#39;s (the mini is out), and that why the model is divided in 4 parts.</li><li>Easy printing with minimal material usage, PETG and TPU, and 3 screws and corresponding nuts to create a good seal, which is necessary for insulation.</li><li>It should be aesthetically pleasing, visually communicating its function (more on this later).</li><li>Be aesthetically interesting while fulfilling functional needs (such as sealing and others).</li><li>Allow for the placement of some desiccant at the base to maintain controlled humidity levels.<ol><li>Check my <a target="_blank" href="https://www.printables.com/model/878116-desiccant-container-for-spools" rel="nofollow noopener">Desiccant container for Spools</a></li></ol></li></ol><figure class="image image_resized" style="width: 75%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_jwx6iotd86ps.png"></figure>This version cannot be used to feed the printer with filament (see image bellow, serving instead as a temporary storage container and always with the accessory mentioned in the previous point to keep humidity levels low. It should last for a few weeks... The time it takes for the desiccant to become saturated depends on the humidity in your area. I recommend <a target="_blank" href="https://amzn.to/3ywHAkg" rel="nofollow noopener">silica desiccant</a>, which can be reused by heating it in an oven or microwave.For more permanent storage, you can use vacuum bags.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_fsi2f6dt0gkp.png"></figure>So, here it is saying hi and taking off his hat ;)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_m7g62ayx5544.png"></figure>&nbsp;The Closing clips can represent the color and material that inside the box, the text on the clip can be edited on Bambu Studio.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_j4bvn16x1kfz.png"></figure>You can choose between the version with or without the logo, chose the 3mf file that suits you best.<blockquote>For some reason, there has been a movement within the community against displaying the Bambu Lab logo on my work. In my opinion, the logo is an interesting graphic element and much like in some sports, people enjoy showcasing the brand, creating a sense of belonging to a group. While there could be many reasons for opposition, tastes are subjective, making this a trivial matter that I will not discuss more.Another point to note is that neither Bambu Lab, Prusa, nor any other company pays me to include their logo on these models. This process is an inherent artistic feature. To end this, beauty is always in the eye of the beholder.</blockquote><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_aopgdwqnicdc.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_zw0sh990xfk2.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_9evotkab6205.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_kybvegq67dk5.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_l67ul8rmcu4t.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_c8y9du0irie6.png"></figure></td></tr></tbody></table></figure>And an example of a printed part with Translucent PETG from bambu labThere is a other version, prime, that was designed with the filament feed in mind, more advanced, with rollers, pneumatic adapter and other features:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_xv9fv02vwmir.png"></figure>If you are “<a target="_blank" href="https://www.printables.com/@jorge_rui/store" rel="nofollow noopener">my club member</a>” you can download it <a target="_blank" href="https://www.printables.com/model/880895-spoolbox-for-bambu-lab" rel="nofollow noopener">here</a>.<h3>Printing parameters</h3>Special care has been taken to provide the models with the printing parameters already defined; however, you are free to change whatever you them if necessary. The use of multiple colors should not hinder those who do not have a multi-material printing unit, as there are only 4 color changes throughout the process. That being said, the provided 3mf files are configured for use with the AMS and changing them for printing without the AMS is up to you.  I would like to emphasize that these models cannot be distributed in any way or form; therefore, any alterations are solely for your own use. This decision stems from issues I had previously, where my work was copied extensively, leading to accusations that I had copied the models myself (my own models…)<blockquote>Some may have some special feature that you can configure to your linking&#39;s. An examples is the closing clip that you can change the text label and material color to match the spool material.</blockquote><figure class="image image_resized" style="width: 50%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_i6ypksrelafw.png"></figure><ul><li>Printing material <a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&amp;u=4026304&amp;m=138211&amp;urllink=&amp;afftrack=" rel="nofollow noopener">PETG and TPU</a> from Bambu Lab,<ul><li>Other material can use other materials you may prefer, like <a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&amp;u=4026304&amp;m=138211&amp;urllink=&amp;afftrack=" rel="nofollow noopener">PLA</a>, but PETG can make translucent parts (not easy, but possible (very slow and hot with a nice quality filament without moister, and don&#39;t expect &#34;glass&#34; like opacity. Here you can find an exceptional example of application: <a target="_blank" href="https://www.printables.com/model/15310-how-to-print-glass" rel="nofollow noopener">How To Print Glass by Rygar1432</a></li><li>the file “SpoolBox_translucent.3mf” contains some top lids (with logo and clean) with a configuration that I think will render you the best results without taking you days to print. The one made by Rygar1432 will give you the best result, but will be a very slow print approx. 20mm/s</li></ul></li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_zzqvbl8t0tfh.png"></figure><h4>Parts included that are needed to print</h4><ul><li>Base (<a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&amp;u=4026304&amp;m=138211&amp;urllink=&amp;afftrack=" rel="nofollow noopener">PETG or PLA)</a>;<ul><li>Right</li><li>Left</li></ul></li><li>Top (<a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&amp;u=4026304&amp;m=138211&amp;urllink=&amp;afftrack=" rel="nofollow noopener">PETG or PLA</a>);<ul><li>Right</li><li>Left</li></ul></li><li>Joints (<a target="_blank" href="https://shrsl.com/4cpo2" rel="nofollow noopener">TPU</a>)<ul><li>Volume 1 &amp; Volume 2, They include:<ul><li>Side<ul><li>Top</li><li>Bottom</li></ul></li><li>Top<ul><li>Right</li><li>Left</li></ul></li><li>4x Foot&#39;s</li></ul></li></ul></li><li>Hinge and Closing Clip (<a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&amp;u=4026304&amp;m=138211&amp;urllink=&amp;afftrack=" rel="nofollow noopener">PETG or PLA or any other material you like)</a><ul><li>in total there are 2 parts, that print in place 4 bodies.</li></ul></li></ul><h4>Assembling</h4>See image on how to assemble (The exploded view may help one this, so check it)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_bega79b57gvh.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_04y1zjviaeqs.png"></figure>The feet&#39;s on the base must be glued if you what to use them (recommended).If you want to add a humidity sensor, there is a configuration for that on the 3mf file included. I&#39;ve use this <a target="_blank" href="https://amzn.to/3WDsFPk" rel="nofollow noopener">temperature and humidity sensor</a>.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-21_4423bb8d0b54f.png"><figcaption>Box with humidity sensor</figcaption></figure><h4>Support the designer:</h4>This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a target="_blank" href="https://www.buymeacoffee.com/designrepcom" rel="nofollow noopener">buymeacoffee </a>or <a target="_blank" href="https://www.paypal.com/donate/?business=BUM67EMDJRXSN&amp;no_recurring=0&amp;currency_code=EUR" rel="nofollow noopener">paypal, </a>or even better, join “My Club” here in printables.com, that will be greatly appreciated.Change Log<ul><li>(17-05-2024) - Initial release</li></ul>

SpoolBox 4 all

Helpers

Jopek Design

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/381124/2024-01-09_yztq9u8cw9ql.png"></figure><h4>Dimensions (LxWxH)</h4>110 x 64,32 x 20,18 mm (100% scale)<h4>Basic information</h4>Trilobites have been extinct for quite a while now, so you most likely won't get the chance to hold one in your hand any time soon. Until someone brings them back to life, here's a good alternative!<h4>Files information</h4>I've included 1 file in the .stl format.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/381124/2024-01-09_zj8hmawflnb0.png"></figure><h4>Material</h4>PLA<h4>Layer height</h4>0,2 mm<h4>Infill</h4>>15%<h4>Support</h4>The model was designed not to require any support material.<h4>Scaling</h4>A well tuned setup should be able to print the model reliably at up to 50% scale, I wouldn't recommend going below that. If you're printing a downscaled version, you need to make sure, that the first layer adhesion is sufficient, as the contact area isn't exactly big, and it might cause issues.<h4>Orientation</h4>Default, laid flat on the belly<h4>Adhesion aid</h4>If your printer suffers from poor buildplate adhesion, consider using some kind of adhesion booster, such as adhesive spray or glue. The contact area is fairly small, and the print might detach otherwise.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/381124/2024-01-09_1vlcwoutsbqk.png"></figure>In this section, you can find a list of all updates and fixes, which were introduced to the model along the way. Each update will be explained thoroughly, so that you know, which issue was every specific update adressing. If you're having any problems with the model, you can check here, if a new, revised version of the model, has already been released in a response to your problem, or not.If you run into any issues with the model, please visit the section of known issues, which can be found just below Updates and fixes. If you won't find your specific problem there, don't hesitate to contact me via dm.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/381124/2024-01-09_7qvyiugvs1b6.png"></figure>There currently aren't any known issues/work in progress. If you run into any, please contact me via dm.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/381124/2024-01-09_4fjxyiwkmug8.png"></figure>My work is free for personal, non commercial use. If you want to sell, or monetize my models in other way, please contact me via dm, and we will discuss details, terms and conditions, and your individual pricing plan.

Articulated Trilobite

Kids Stuff

WillPrintsThings

This is the Hex-Cup, a hexagonal table top game organizer.&nbsp;Designed to be easy to print on any FDM printer, the Hex-Cup is a great way to keep organization from ruining your play experience.&nbsp;Print them out, throw some magnets into the easy to insert holes, and slap them together!&nbsp;I may make more versions of this if there is interest, let me know down in the comments!

Hex Cup - Table Top Gaming Organizer

Card Stuff

Jonas_H

If you like plants, lights and 3D printing then this could be a nice project for you.This print is a plant pot that combines all these things together in one thing - a glowing plant pot.&nbsp;The special thing is that you can change the inner look from the plant pot when you cahnge the type and density of the infill pattern. You can review these changes in the slicer when you temprarely set the wall loops to zero. In the uploaded print profile you can find the variants that are pictured in the photo section.&nbsp;As a light strip I have used these 10m long ones from Amazon: <a target="_blank" href="https://amzn.to/42NRtFl" rel="nofollow noopener">https://amzn.to/42NRtFl</a> (this is an Affiliate Link. When you order with this Link I get a small provision and that helps to support my work)&nbsp;As filament I have used a transparent PETG Filament for the part A and matte black PLA Filament for part B and C.&nbsp;The assembly is pretty straight forward.The first step is to insert the whole LED strip through the hole onto the plant pot.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/585393/2024-02-18_e94e7cce8eb11.png">&nbsp;In the next step you can fix the end of the LED strip with some tape to the inner plant pot (part B). Now simply roll on the whole LED Strip to the inner plant pot.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/585393/2024-02-18_f7d992e3c29dd8.png">&nbsp;When this is done fix the other end to the inner plant pot with some tape. Now you can insert the inner plant pot into the outer part. If you want you can glue the two parts together.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/585393/2024-02-18_6193c0b3c5fff8.png">&nbsp;Now you are finished. If you have any questions or improvemnt sugestions please leave them in the comments. I would be more then happy to answer them.&nbsp;Happy printing :)

Helpers

Kids Stuff

Card Stuff

Home Stuff