Michaelwg

soarpix

<h2>Tooned PORSCHE 911 - model kit</h2>(This cartoon style model is inspired by Porsche 911. Size is approximately: length 100mm, width 75mm, height 50mm)&nbsp;<ul><li>Fully printable model kit</li><li>Spinning wheels</li><li>This model does not need any additional non-3dprinted parts</li><li>The design is divided in many different parts in order to allow printing different parts with different color</li></ul>If you have any questions, let me know in the comments =)&nbsp;Follow me on Instagram <a target="_blank" href="https://www.instagram.com/soarpix3d/" rel="nofollow noopener">@soarpix3d</a>Subscribe to my <a target="_blank" href="https://www.youtube.com/soarpixcom" rel="nofollow noopener">YouTube channel</a>&nbsp;HAPPY PRINTING!

Tooned PORSCHE 911 - model kit

fede sager 😀

big fan matt

have a good laugh at easter with friends and family &nbsp;

eggplant egg 

Sjov

Julia Ebert

This is a big toy human figure that's inspired by a Lego minifigure. I spent a lot of time making this model from scratch to match the original design while making tweaks for tolerances, printability, and strength. While there were a number of minifigure models I found online, most were not designed for printing, which is a particular challenge for the leg, arm, and hand joints. I'm particularly proud of the universal clip I designed for these, which makes for easy assembly and stiff-enough joints to pose your figure.I designed the clips and tolerances for this model to be printed at 100% (10x original Lego scale), but people have previously had success printing my <a href="https://www.printables.com/model/78695-mega-lego-like-skeleton-101-scale" rel="nofollow">10x Lego-like skeleton</a> at smaller scales (eg, 50% or 5x Lego-scale).Now that I have a base model for a Lego-like figure, this opens up a host of options for specific Lego-like figures. If there's something particular you're interested in, leave a comment or send me a message! If you want to make your own modifications, I've included STEP files for all parts (just be sure to give credit for my original design).Fully assembled, this model stands 40 cm (~16 inches) tall. I printed mine with Hatchbox true blue PLA, Hatchbox true red PLA, and Prusament mango yellow PETG.<h4>Printing Instructions</h4>I've included 3MF files for all parts, and parts should import correctly oriented for printing.<ul><li>For PrusaSlicer 2.6+: you just need to load the project file. (This makes use of organic supports, for the legs, which are added with PrusaSlicer 2.6.)</li><li>For other slicers: I've included details about special instructions for all parts, so you should be able to replicate anything necessary for proper printing. Except where otherwise noted, I printed parts in PLA at 0.15mm layer height with 7% cubic infill and without supports.</li></ul>You will need to print:<ul><li><code>32x-connector-pins.3mf</code>: You should need 30 pins for assembly (or 26 if you print the solid head); this has 2 extra just in case. If you have trouble with bed adhesion, add a brim</li></ul><h5>Legs</h5><ul><li><code>legs.3mf</code>: Uses tree supports the top of the lower hole on the leg.</li><li><code>hips.3mf</code></li><li><code>2x-limb-clips.3mf</code>: This file contains two clips. You'll need to print one set of two in the arm/body color, and one set in the leg color. Important: I recommend printing this in PETG or ABS with 25% infill, because it will have to flex and PLA might snap.</li></ul><h5>Body</h5><ul><li><code>arms.3mf</code>: These print with a small surface area on the bed (the wrists), so you might want to add a brim if you have trouble with bed adhesion.</li><li><code>body.3mf</code></li><li><code>2x-limb-clips.3mf</code>: This file contains two clips. You'll need to print one set of two in the arm/body color, and one set in the leg color. Important: I recommend printing this in PETG or ABS with 25% infill, because it will have to flex and PLA might snap.</li></ul><h5>Head & hands</h5><ul><li><code>2x-hands-wrists.3mf</code>: Requires supports on the underside of the wrist clip. Like the limb clips, I recommend printing with PETG (or similar) with 25% infill.</li><li>One of: (all require supports on the underside curve of the head)<ul><li><code>head-face-mmu.3mf</code>: Print the head & face as one part with some sort of multi-material printer (e.g., Prusa MMU or Bambu AMS). Use supports on the underside curve of the head.</li><li><code>split-head.3mf</code> and <code>face.3mf</code>: Print the head (with cutouts) in two pieces. Use pins and glue to connect the halves. Print the face separately and glue it in.</li><li><code>solid-head.3mf</code> and <code>face.3mf</code>: Print the head and face as separate prints. Use supports on the underside curve of the head. Then glue the face parts into the head.</li></ul></li></ul><h4>Assembly Instructions</h4>In addition to the printed parts, you will need cyanoacrylate glue (CA glue/superglue). <h5>Legs</h5><ol><li>Glue the pins into the top of the hip. Add glue to the holes and bottom surface of each of the hip pegs and attach. Important: The slope of each hip peg should be facing out to the sides. If the pins don't want to go together, check that you have this orientation right!</li><li>Use the same gluing approach to attach the limb clips to each side of the hips.</li><li>Gently but firmly press each leg onto the clips. It should snap into place. The hips are symmetric, so you can't put the legs on backwards. This requires a fair bit of force, but you shouldn't need a hammer. If it won't go on, slightly sand or file down the outer head of the limb clip (rather than the inside of the hole on the leg). Warning: The clips are not designed to come out once they're attached, so make sure you're ready.</li></ol><h5>Body</h5><ol><li>Glue the limb clips into each arm, like you did for the legs.</li><li>Glue the wrist onto the hand, with the pins. Because of the relative print orientations here, it's best to use a bit more glue here to make sure it stays on.</li><li>Press each wrist clip into the arm. (They're the same, so you can't put in the wrong hand.)</li><li>Press each arm clip into the body. The body is also symmetric, so you can't put the arms on backwards.</li></ol><h5>Head</h5>If you printed the separate head and face pieces, glue the face pieces into the head. You may need to file or sand some of the face pieces to fit, depending on how well the supports worked.<h4>License Note</h4>This model is marked as non-commercial because I don't want anyone (including myself) having Lego come after them with a lawyer. If you choose to sell prints of this model, you do so at your own risk!

Mega Lego-like Minifigure (10:1 scale)

figurer

Zach B

This is a small parts storage system made up of different sized storage compartments that snap together like Legos do.&nbsp;Each box stack on top of each other. With 1 x 2 boxes and 1 x 1 boxes so you can make any combination you want for your needs.There's single trays for the 1 x 1 boxes and larger trays for the 1 x 2 boxes. There's 2 types of larger trays. One that is split and one that is just one big tray.&nbsp;The Double Boxes are 2inch by 4inch and single ones are 2inch by 2inch in size.&nbsp;There's blank name plates that are stl's. That can either be printed as blanks or modified to add your own wording.&nbsp;Also included is a shelf that mounts to the wall so you can stack these on top. This brace is made for 5 single boxes or 2 doubles and a single or you can put them together with a joiner wedge and add more.&nbsp;The pieces can be pretty snug to get together.&nbsp;All files are printed in standard Bambu Settings&nbsp;UPDATES:10/28/2023 - (UPDATED 10/29/2023) Wall brace is tested now and works good. (Shown in second picture). Still working on joiner wedge to work properly but it really is not needed. Will update when it does. &nbsp;I was trying to find a nice way to store my M screws and other odds and end things. Decided I would design something myself. Please let me know if you have any improvements or concerns. I hope you enjoy&nbsp;Thanks for Looking :)&nbsp;

fede sager 😀

Sjov

figurer

opbevaring