Mi1knc0okies

EPIQ3D

Give your plants/herbs the best start.This planterbox ensures that your seedlings stay fresh and hydrated.If you dont yourself grow plants/herbs, i know this will be a great gift for those who do.&nbsp;<figure class="image image_resized" style="width:86.29%;"><img src="https://makerworld.bblmw.com/makerworld/draft/854456/2024-04-12_9859755e4fc52.png"></figure>&nbsp;The Design is made to be as aesthetic as possible, to blend in no matter where you place it.There a two different bases, one for 8 planters and one for a single planter. Then you can choose if you want 4 or 5 in different locations.&nbsp;<h3>HOW IT WORKS</h3>This self watering planter is designed to slowly absorb water from the reservoir (This needs to be filled up occasionally).The lids provides a warm and humid environment for the seedlings, for this to work properly they should be printet in clear material.Individual lids ensures that you can remove lids from some of the seedsplants if needed, and others are not quite there yet.To prevent to much humidity and the risk of mouldy soil, the lids have ventilation holes.&nbsp;&nbsp;<figure class="image image_resized" style="width:86.29%;"><img src="https://makerworld.bblmw.com/makerworld/draft/854456/2024-04-12_16e56efe4909d.png"></figure>&nbsp;There are 2 water inlets in the planters, where it is recommended to use a wicking material at the bottom.This helps to absorb water into the soil slowly and prevent excess moisture in the soil. To much moisture can reduce oxygen in the soil, damage fine root hairs, and render the root system unable to absorb water.&nbsp;You can place a couple of cotton balls / cotton wool in the bottom of the pot.&nbsp;The planters are splittable to prevent damaging the delicate seed sprouts, when they are big enough to be transplanted.(When they are ready to be transplated, then check out my other self watering planters for herbs and flowers.)&nbsp;To prevent/slow down evaporation of the water in the reservoir (and stabilize the plantes), its recommended to use the provided lids.&nbsp;&nbsp;Optionally you can use the funnel to fill in soil to the planters, use the stamper to LIGHTLY press the soil down.Use the other side of the stamper (the poker) to make a hole for the seed. &nbsp;&nbsp;Basic print settings:<ul><li>Infill : 10%</li><li>Walls: 3</li><li>Top/bottom shell layers: 3</li><li>No support needed</li></ul>Dimensions: 8 planter base - H: 32.3, L: 231.8mm, W: 121.8mmsingle planter base - L/W: 66.8mmPlanter - H: 111mm, L/W: 42.8mm&nbsp;------------------------------------------------------------------------------------------------------------------------------------------If there is any issues or comments, dont hesitate to reach out.I will try to incorporate any issues to a updated design if needed.

Self watering Seed starter

Plants

Xor-3dpr

Update 5/1/2024 I created a wider adapter for the small silica box that makes it possible to fill silica easier. To use it you need to remove the lid of the small silicabox and fill it up. The adapter suits the big funnel. Both versions of the small funneladapter is included in the -v2 print profile. ------------------------------------------------------------- I created a funnel for the excellent "Drybox for AMS" (https://makerworld.com/en/models/67281#profileId-71174)&nbsp;The funnel itself fits the bigger box. Apply the smaller funnel to the bigger and you can use it for the small box also.

Funnels for silica - Drybox for AMS -

For the printer

Collecticraft

Meet the Minimalist 3D Printed Self-Watering Geometric Planter – a cool and easy way to add style to your indoor or outdoor space. This planter has a unique shape that looks modern and simple, interlocks perfectly without any extra supports messing up its sleek design.&nbsp;Made with strong materials, it's not just nice to look at but also smart. This planter waters your plants all by itself, so you don't have to worry about it. There's a special space inside that holds water for your plants, keeping them happy and healthy.&nbsp;The cool angles of the dodecahedron shape make it look interesting with shadows and light. It's clean and classy, fitting in easily with any room or garden style.&nbsp;This self-watering planter is not just a home for your plants; it's a stylish piece that makes any space look great. Put it on a table, hang it up, or place it on a shelf – it's sure to catch eyes with its unique shape, simple style, and handy watering feature.&nbsp;Say hello to the Minimalist Dodecahedron 3D Printed Self-Watering Planter – a modern, easy-to-use piece that brings nature into your home with a touch of style.

Self Watering Geometric Planter

Around The House

Wiseone

The curious discards from the Bambu 3D printer, left unattended, will litter your desk or floor. Here is yet another "poop chute" to divert the filament effluent into an adjacent receptacle.&nbsp;My design consists of two parts, a chute and a bin or "poop tray". The chute catches the filament waste and diverts it into an easier to get to small bin. The design aims to be minimal in print material, yet functional.&nbsp;The chute secures to the back of the Bambu printer via a 3mm x 7mm self-tapping screw. The screw should be enough to retain the chute in position. Otherwise, double sided tape can assist. The bin comes in two sizes (50 and 100mm widths) and sits freely at the base of the chute and captures the waste.&nbsp;With regards to a replacement screw, here's a couple of suggestions from my followers:    1.  If you got your printer with the AMS, the screw that held it to the print bed is the perfect size to hold this in place.    2.  The screws included with your Bambu printer to make up the scraper fit nicely, too.&nbsp;My print is made in 1.75mm Bambu PLA Green filament, with 0.24mm layer height and 15% infill on a Bambu Lab X1 Carbon printer. Print supports are not required.&nbsp;I hope you can find this print useful, too.&nbsp;UPDATE 12/12/2023 Added a 100mm wide poop chute bin.

Poop Chute (Yet Another) - UPDATED

poop chute

Flori_

This is a remix of a model by @EmaKralova(https://makerworld.com/en/models/224716#profileId-242637) I added different size options.The &#39;small&#39; version is the original by @EmaKralova&nbsp;Lengths:Small: ca 140mmMedium: ca 220mmLarge: ca 290mm&nbsp;Advice:The &#39;large&#39; zip tie only fits on the 265mm² build plates diagonally.&nbsp;I recommend printing with TPU&nbsp;If you just want the ‘small’ version, please check out the original design (https://makerworld.com/en/models/224716#profileId-242637)

[Remix] reusable zip tie

Tools

ProjectSkyDroid

Back mounting plate for Dash Mounting system for F150 (2015-2020) and F250/F350 (2017-2022).&nbsp;Mounted using 1 ¼" long 12-24 screws.&nbsp;Top Mount: <a target="_blank" href="https://makerworld.com/en/models/61831#profileId-64256" rel="nofollow noopener">Dash Mount for Ford F-150 2015-2020 and F-250 F-350 (2017-2022) with 8" Screen by ProjectSkyDroid - MakerWorld</a>

Back Plate for Dash Mount for Ford F-150 2015-2020 and F-250 F-350 (2017-2022) with 8" Screen

Truck things

Heiko_Hoffmann2000

Es sind Pylonen Verkehrsleithütchen in der Größe 35 x 35 x 56 mmIdeal für RC und RC Truck etc. 1:10 / 1:12 etcEs kann farblich angepasst werden.&nbsp;These are pylon traffic cones measuring 35 x 35 x 56 mmIdeal for RC and RC Truck etc. 1:10 / 1:12 etcIt can be customized in color.