Mechanicos

Jesse L

Greetings Everyone!&nbsp; Like many of you, I printed myself a Bento Box filter to keep VOCs from entering my lungs. The only thing I wasn't sure about was how to power the fans. So with that in mind, I decided to learn enough CAD to create my first 3D model from scratch (so please be kind to me :) ) to create a custom power solution that would allow me to do the following:<ol><li>Have the PSU be external as I did not want to connect it to the internal power supply on my X1 Carbon.</li><li>Be able to run 2 x 40mm fans and have room for a small LED strip in the future.</li><li>Does NOT require any kind of modification to the printer and be easily removed if needed.</li><li>Have the ability to disconnect the fans or any other accessory quickly.</li><li>Allow me to turn the Bento Box fans On or Off using a remote, as I was not too fond of the idea of either having the fans be always on or fiddling with the power plug in the back of the printer or behind my desk to turn the fans on or off.</li><li>Have the ability to power an LED strip that I plan on adding to the top of my X1 for better lighting. </li></ol>With the above in mind, I created the external power supply module model that you guys see. It uses a tiny little 15W Meanwell power supply to provide the 24V output and a standard C14 connector for AC input. The main version of the design allows you to have 2 x 24v outputs (15W max combined), one controlled by a remote, and the other one is always on. Both outputs are in the form of a standard JST SM 2-pin connector allowing you to power whatever small things that you might have. There is also a version with just a hole on the side allowing you to run wires as needed. &nbsp;The current design is limited to a very specific list of hardware, so please review the list below to see if those items are easily available for you or not.&nbsp;Required Components:<ol><li>Meanwell RS-15-24 PSU - <a target="_blank" href="https://www.amazon.com/dp/B0180ZXAPI?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">Link</a> </li><li>Fused and Pre-wired Power Switch with IEC320 C14 socket - <a target="_blank" href="https://www.amazon.com/FILSHU-Current-Socket-Rocker-Switch/dp/B0895T9NXF/ref=sr_1_16?crid=3R5UCQWH9GM67&keywords=c14+power+socket&qid=1696262118&s=industrial&sprefix=c14+power+socket%2Cindustrial%2C127&sr=1-16" rel="nofollow noopener">Link</a></li><li>Universal Wireless RF Remote Control Switch (24V) - <a target="_blank" href="https://www.amazon.com/dp/B09CYMB6FS?ref=ppx_yo2ov_dt_b_product_details&th=1" rel="nofollow noopener">Link</a></li><li>M3 X 5mm screws (I used M3 motherboard mounting screws that I had laying around)</li><li>2 Pin JST SM Male and Female Connectors x 2 - something like this <a target="_blank" href="https://www.amazon.com/gp/product/B06WGN56V2/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1" rel="nofollow noopener">Link</a> or you can crimp your own. </li><li>4x2 Magnets x 5 - <a target="_blank" href="https://www.amazon.com/gp/product/B09SKWWMVM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1" rel="nofollow noopener">Link</a> (used to hold the top cover to the base. Using 4x2 magnets assuming that's what most people used on their bento boxes)</li><li>10x2 Magnets x 6 - <a target="_blank" href="https://www.amazon.com/gp/product/B09WZTSQ9Y/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1" rel="nofollow noopener">Link</a> (Used to hold the unit to the back of the printer. You can just leave it sitting in the back if you have room and don't want to get another set of magnets)</li><li>A method to join a couple of wires. I used a couple of Wago connectors, but you can use whatever is your preferred method. </li><li>Wire Ferrule's to make installation easier towards the end - <a target="_blank" href="https://www.amazon.com/gp/product/B07WRQN45C/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1" rel="nofollow noopener">Link</a> (I only used them on the wireless switch input wires)</li><li>Bento Box and enough small gauge wire (22 AWG) to be able to connect the fans to the PSU. </li></ol>Required Printed Components:<ol><li>PSU base</li><li>PSU cover<ol><li>The PSU cover has the Bambu Lab logo on it that can be printed in a different color if you like.</li></ol></li></ol>&nbsp;See the Instructions document for what other parts/items you might need along with assembly instructions and other helpful files.&nbsp;This is my first model built from scratch so please excuse any mistakes I might have made, and would love feedback on ways to improve the design or the included instructions. Fusion 360 file included in case certain parts are not available.

24v External power supply for Bento Box

BENTOBOX

h3li0

<h2>cloud box</h2><h3>modular and stackable through magnets</h3>check out companion model <a target="_blank" href="https://makerworld.com/en/models/454666#profileId-362199" rel="nofollow noopener">cloud organiser · modular</a>&nbsp;this is a modular design that consists of the boxes themselves, lid, and as options you have feet and inserts. the stacking between the boxes, lid and feet is achieved through the use of 6x3mm magnets. These are affordable and readily available in many stores (i purchased mine from amazon in a pack of 100), and enable the stacking of the components, resulting in a satisfying &#34;thock&#34; sound and smooth action.&nbsp;You&#39;ll need 16 6x3mm magnets to achieve the same result as shown in the pictures and included in the print profile, as well as some drops of super glue to ensure they really stay in their position and don&#39;t get pulled away from the slot.&nbsp;please make sure that you are very mindful of the polarities of the magnet when assembling and gluing in their spots as you want to make sure that each section atracts and not repels the one that will sit above/below&nbsp; print profile consists of 4 plates as seen below. the feet and inserts are optional, but for me the inserts really make the finishing touch and increase the flexibility. there is 3 different designs of inserts, and they all have 1mm thickness walls, and are design with very small tolerances to ensure a perfect tight fit, so make sure that you have your machine calibrated and filament dry so that you don&#39;t run into any tolerance issues&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000443394/design/2024-04-25_d1f132b73f75e.png"></figure>&nbsp;photos shows printed in matte white pla, matte black pla and bronze silk pla<ul><li>0.20mm layer height</li><li>15% cubic infill</li><li>no supports or brims needed</li></ul><h3>commercial licence membership available on my <a target="_blank" href="https://patreon.com/h3li0" rel="nofollow noopener">patreon</a></h3><a target="_blank" href="https://www.buymeacoffee.com/h3li0" rel="nofollow noopener">buy me a coffee</a>&nbsp;note: all photos uploaded are of the actual printed model, taken inside a lightbox or in home studio&nbsp;

cloud box · magnetically stackable · modular

PRINT NOW

Barika

nice fan cover designed for the P1S/P1P and X1 in voronoi Style..

P1S/P1P Fan Cover

X1C ACCESSORIES

frankieorabona.giochi

Drawer for 30 nespresso capsules.I recommend printing the contents (body) in PETG as some coffee machines may get too hot and cause the PLA to deform.The container is suitable for handles whose holes are 96 mm apart. I personally used a handle from IKEA (model ENERYDA - 2pcs 8euro).&nbsp;------------------------------------------------------------------------------------------------------&nbsp;Contenitore per 30 capsule nespresso.Raccomando di stampare il contenitore (denominato body in Bambu Studio) in PETG poichè alcune macchine potrebbero scaldare troppo e far deformare il PLA. I fori del cassetto sono compatibili con maniglie i cui fori sono distanti 96mm. Personalmente ho utilizzato una maniglia IKEA che mi è avanzata. Il modello è ENERYDA (https://www.ikea.com/it/it/p/eneryda-maniglia-cromato-60347512/#content)

Drawer for Nespresso capsules

NESPRESSO

Rawsen Mitchell

A simple, modular spice rack with sliding trays for easy access. The model is 10&#34; deep, but I&#39;ve included the SW model in case you need to change the dimensions.&nbsp;

Modular Spice Rack

KITCHEN

Licky Lauda

These trays are stackable in the Uppdatera box (24x17) i found myself in need of organizers and found those Uppdatera boxes at the Ikea. now you can use these trays to sort all your screws or other DIY stuff.  i also added empty trays for you to customize or just to get the most out of these boxes. when you use the lid they become stackable aswell.&nbsp;note: the bottom tray is press fit.this means you put it in and the bottom tray stays in. (this is by design.)if you want to be able to remove the bottom tray you can print the bottom tray in 99,3 procent scale.the rest of the trays still stack on top of this.&nbsp;Also check out my other Designs!I have a bunch more stuff in my profile!! <a target="_blank" href="https://makerworld.com/en/@LickyLauda" rel="nofollow noopener">https://makerworld.com/en/@LickyLauda</a>&nbsp;or check out my youtube channel:<a target="_blank" href="http://www.youtube.com/@licky-lauda" rel="nofollow noopener">http://www.youtube.com/@licky-lauda</a>&nbsp;

Uppdatera box trays with and without dividers

ORGANISE

3D Print Masters Hub

Desktop Organizer-Great for organizing miscellaneous pens, pencils, markers, paperclips and more!-Apply accent strips to your desired color.-Please like and subscribe! More to come!-See bio for more exclusive print project ideas.🔥🔥 Check out my PRO MODELS HERE! <a target="_blank" href="https://cults3d.com/en/users/FabulousFilaments/3d-models" rel="nofollow noopener">https://cults3d.com/en/users/FabulousFilaments/3d-models</a> 🔥🔥

Vertical Desktop Organizer

STORAGE BOX

Oosh Proto

Modular, single tier storage drawers. (fits snug on top of a Bambu Lab or next to you on your desktop)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/103072/2023-10-19_d54b3332be62f.jpeg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/103072/2023-10-19_0b6cf745a41c38.jpeg"></figure>

M2 Bambu Lab Modular Storage Drawers

DRAWERS

Zetta Art

This is air scrubber/filter based on BentoBox V2.0. It uses 60 mm fans instead of 40mm ones and 3mm pins instead of magnets.&nbsp;Why 60mm fans? They are more quite and can provide a better air flow compared to 40mm fans.&nbsp;Why don&#39;t I use magnets? The common neodymium magnets are rated to 80 degrees and the heatbed is very close to the magnets, so if you print ABS/ASA or any other material that requires high bed temps, you&#39;re at risk that the magnets will lose strength over time and the filter starts to fail being stick together. &nbsp;The pins work better in this case, because they stick the pieces together by friction.&nbsp;Also the box is 8mm longer, so more carbon can be put inside the filter.&nbsp;Things that you need to assemble the filter:-6x M3 screw → 40mm for 60x20mm fans or 35mm for 60x15mm fans-8x M3 pin → 10-16mm, doesn&#39;t matter-4x M3 pin → 8mm for the lid-2x 60mm fan of your choice-Activated carbon - sacks or granules&nbsp;Update 05/18/2024:-Changed the shroud a bit so the inside screw hole matches the hole on the bottom of the printer. Also tweaked a hole on the side, to make it more accessible for the allen key.&nbsp;Update 05/26/2024:-Changed the lid and shroud a bit, uses less material and there&#39;s more space for the bed to make it safer

60mm Fan Activated Carbon Filter (BentoBox)

FILTRATION

<h2>organiser</h2><h3>with modular dividers · 4 options</h3>this is a modular design that consists of:<ul><li>organiser · x:200 y:100 z:80 mm</li><li>4 options for dividers so that you can choose which one(s) you prefer · they slide in place</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000459859/design/2024-05-10_47676d21986f2.png"></figure><h3>notes</h3><ul><li>dividers are designed with small tolerances to ensure a perfect tight fit, so make sure that you have your machine calibrated and filament dry so that you don&#39;t run into any tolerance issues</li><li>dividers are printed vertically and brims are required, make sure that that they&#39;re fully removed to ensure a good fit (recommend using a deburring tool if needed)</li></ul>photos show printed in marble white pla, and matte black pla<ul><li>0.20mm layer height</li><li>10% adaptive cubic infill</li><li>outer brim on the dividers</li></ul><h3>commercial licence membership available on my <a target="_blank" href="https://patreon.com/h3li0" rel="nofollow noopener">patreon</a></h3><a target="_blank" href="https://www.buymeacoffee.com/h3li0" rel="nofollow noopener">buy me a coffee</a>&nbsp;note: all photos uploaded are of the actual printed model, taken inside a lightbox or in home studio

organiser · modular dividers

Desk

dave3ddiy

Download link is broken and thingiverse is not fixing it. To download, go below the thumbnails there is the section "thing files". Click on that and download the STL there.Hi Everyone, This is a shoe rack design based off of my Monitor stand. This can be printed on a Prusa Mk3 Bed dimensions. You will need to print with no top and bottom layers. The pictured infill is 5% honeycomb with 9 perimeter layers.For the piece of wood. You can use any 3/4 thick wood, plywood,mdf, laminate etc. The depth is 8 inches and the length is however long you would like.<h3> Print Settings</h3>Printer Brand:PrusaPrinter: <div>I3 MK3S</div>Rafts:NoSupports: <div>No</div>Resolution:.2Infill: <div>5%</div> Filament: prusament PETG or PLA Galaxy BlackCategory: Household

Stackable Shoe Rack

Stackable

<h2>polygon planter</h2><h3>with wrap-around plate</h3>modern minimalist planter design with polygon pattern that sits elevated in a wrap-around plate&nbsp;update · just posted a companion model, <a target="_blank" href="https://makerworld.com/en/models/500642#profileId-415642" rel="nofollow noopener">zig zag planter · wrap around plate</a>&nbsp;dimensions in mm &gt; x:110 · y:110 · z:100&nbsp;photos show two different color scheme choices, printed in matte black pla, marble white pla, and marble brick pla<ul><li>0.20mm layer height</li><li>10% cross hatch infill</li></ul><h3>notes</h3><ul><li>includes bambu studio 3mf file and STLs</li><li>all photos uploaded are of the actual printed model, taken inside a light-box or in home studio</li><li>if you enjoy this model please consider to <a target="_blank" href="https://www.buymeacoffee.com/h3li0" rel="nofollow noopener">buy me a coffee</a></li><li>commercial licence membership available on my <a target="_blank" href="https://patreon.com/h3li0" rel="nofollow noopener">patreon</a></li></ul>&nbsp;&nbsp;

polygon planter · wrap around plate

HOUSEHOLD

Poldion

Introducing the "Skadis Stand" – the sassy and stylish solution to elevate your IKEA Skadis pegboard game to new heights! Crafted with precision using the wizardry of 3D printing, these quirky appendages transform your humble pegboard into a majestic masterpiece.&nbsp;&nbsp;Check out my Other Skadis Stuff in my Profile!

Skadis Stand

SKADIS

Lilex_

<h3>Model</h3>Dimensions:high: 59mmwidth: 184mmlength: 222mm&nbsp;I used Bambu Lab PLA Matte.For this Model ~216g.&nbsp;If you like my print, please give me a feedback and rating.Also if you have any issue please let me know.&nbsp;UPDATE on :  (17.March.2024)If you want a handle I updated a printprofile with an snap-in technologie.Don´t be scare it snaps in hard ;) If there any proplem with the snap-in, please let me know.&nbsp;For anyone who has problems with strength, here is a profile that provides a quick solution.&nbsp;<a target="_blank" href="https://makerworld.com/en/models/468980?from=search#profileId-378206" rel="nofollow noopener">Glued In Is Stronger by rafiki66 - MakerWorld</a> PS.: Thanks in general for your feedback.A new version with reinforced construction and a stop function will be coming in a few days.&nbsp;

under desk drawer M

UNDER DESK

Another Silica box for the ASM inlcuding a shovel<ul><li>Great design</li><li>Great fit into AMS</li><li>Great function (rotating lid)</li><li>Lid clicks into box</li><li>Lid stays securely on the box while opening</li><li>Get out with only one finger</li><li>Including shovel for easy fill in silica</li></ul>Designed to print without support!

BambuLab AMS Silica box with shovel

soarpix

<h2>Custom WILLYS JEEP</h2><ul><li>Complete model kit</li><li>Spinning wheels</li><li>This model does not need any additional non-3dprinted parts</li><li>The design is divided in many different parts in order to allow printing different parts with different colors</li></ul>If you want rim and tire separated you can find it here: <a target="_blank" href="https://makerworld.com/en/models/433445" rel="nofollow noopener">https://makerworld.com/en/models/433445</a>&nbsp;Resolution: 0,2 Supports: Yes Infill: 15% Filament Material: PLA&nbsp;If you have any questions, let me know in the comments or on my youtube channelHAPPY PRINTING!<h2>Click here to wach the video =) <a target="_blank" href="https://youtu.be/eVaXzeeD8cM" rel="nofollow noopener">https://youtu.be/eVaXzeeD8cM</a></h2><h2>Post-Printing</h2><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000433442/design/2024-04-18_ega264w78jwu.jpg" alt="image">                <h2>Click here to wach the video =) <a target="_blank" href="https://youtu.be/eVaXzeeD8cM" rel="nofollow noopener">https://youtu.be/eVaXzeeD8cM</a></h2>