MeTrALLa

chameko小廢物電波塔

10/07 Thanks to user_569762197 for providing two beautiful and clear photos!&nbsp;I saw the Cooler Master show off a new case, and the cut-out design on it was very interesting, and I remixed this&nbsp;Spool I followed Bambu Lab's STL archive to remodel in 3D and then worked on Cooler Master's design with other creators' Spools Combination of cut-out designs.label I created a replaceable label, I designed it according to the sticker of Bambu Lab, but I found that the spool sold by Bambu Lab did not match the label position of the STL file, which could lead to a gap of 50~100g. Therefore, I recommend reducing the gap by not using refills.The label recommends that the first layer be printed with a width of 0.4mm to improve the clarity of the text.There are several versions of label, if you don't have the one you need, you can download a blank version to modify.I have gained a lot in this community and hope that I can also contribute some of my strength.

Bambu Lab Reusable Spool Cooler Master Remix

CHORRADAS

Marco Tiburtini

Hello guys,&nbsp;this project was created to keep the printer in a small space (bookshelf, for example).I designed a single system that takes up very little space and allows you to:&nbsp;<ul><li>move the AMS buffer to the side (reducing bends and cm of pipe);</li><li>integrate the splitter with a simple 90 degree bend;</li><li>include an arm that holds the external spool holder;</li><li>integrate entrance for the outer material;</li><li>make sure that the spool of external material can be inserted even though there is only 10 cm of space on the side;</li><li>and much more, beacause the system is fully expansible.</li></ul>&nbsp;Before starting with the project there are 3 important things you need to remember:<ul><li>this system integrates a support to connect an iconic splitter designed of another creator. You can still connect the splitter you want via the extra holes but, trust me, you should print this: <a target="_blank" href="https://makerworld.com/it/models/18174#profileId-17021" rel="nofollow noopener">https://makerworld.com/it/models/18174#profileId-17021</a></li><li>I recommend you use theONE Roller instead of the original holder. Here you can find the link: <a target="_blank" href="https://makerworld.com/it/models/110455#profileId-118082" rel="nofollow noopener">https://makerworld.com/it/models/110455#profileId-118082</a></li><li>please be careful: many of the pieces are large and must be printed without the auxiliary fan to avoid warping!</li></ul>&nbsp;I've been testing the system for 3 months (with excellent incredible results). During this trial period, everything went perfectly. Everything runs smooth, never jams nor has any kind of problems.&nbsp;Now I wanna give you a guide to assemble the system (you can find all the materials you will need on the slide 7):<ul><li>first, after having printed everything, you will have to insert 5 nuts into the appropriate holes provided in the 2 arms. Use tweezers, heat the nuts and insert them until the end (be careful). I also add a little drop of epoxy glue in the holes to fix everything.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/476445/2023-12-27_0a587f1f6ce1a.jpg"></figure><ul><li>insert the arms into the appropriate spaces on the base and secure them with 5 screws (20mm);</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/476445/2023-12-27_a69431cac0862.jpg"></figure><ul><li>screw the PTFE connector on the smaller arm;</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/476445/2023-12-27_28d0391e49a76.jpg"></figure><ul><li>connect the base with the back of the printer with 4 screws (16mm). 1 on the top and 3 on the bottom.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/476445/2023-12-27_753e2564e1bac.jpg"></figure><ul><li>fix the support for the splitter or the button (depending on which one you decide to use) with a 20mm screw;</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/476445/2023-12-27_b6f7efe4d9b84.jpg"></figure><ul><li>prepare two PTFE tubes. One of 23.7mm (from buffer to splitter) and the other of 17.2mm (from small arm to splitter);</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/476445/2023-12-27_dee108d031ba9.jpg"></figure><ul><li>fix the buffer and connect the tubes to the splitter.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/476445/2023-12-27_dab14b727c7b9.jpg"></figure><ul><li>now, if you decide to use the original holder, you should mount it in the support, insert the nuts and secure holder and support with m3 screws (8 mm); remember to look at the ONE ROLLER, it will be much more efficient than the standard holder.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/476445/2023-12-28_99464ff023127.jpg"></figure><ul><li>this will be the result:</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/476445/2023-12-28_34e3fc8d5219f.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/476445/2023-12-28_221478e99474f.jpg"></figure>