Another amazing model! Great work! Made this as soon as i finished your other Halo helmet. Printer: Bambu H2S Scale 95% Profile: 0.2mm High Quality Filament: PLA MATTE - Dark green - 11501 PLA BASIC - Black - 10101 PETG - Translucent Light Blue- 32600 Printing: Each plate came out great. No issues at all. Assembly: Really easy to put together. The joining strips were excellent, a massive step on the connectors used on the halo-inspired helmet. The visor fits perfectly in the holder, the fit is so perfect i didn't have to use any glue. Fitment: My head has a diameter of 57cm at the widest part. Printed at 95% scale and it fits perfectly.

Printer: Bambu H2s Profile: 0.16mm High Quality Scale: 100% Filament: PLA MATTE - Dark green - 11501 PLA BASIC - Black - 10101 PLA BASIC - Jade White - 10100 PETG - Translucent Orange - 32300 Printing: Each plate came out great with no issues. Take the time to review the sliced model before hitting print, there were a few models that didn't have supports at key areas by default which would have resulted in small overhangs printing in mid-air. Fixed by painting supports on where required. Assembly: Not too difficult. Strongly recommend only gluing a single part at a time and allowing to fully set before moving on. 1. Start by gluing the dowels onto 1 side of each main part. 2. Join the top front and top back. 3. Join the lower left part to the top. 4. Join the lower right to the top part. 5. Join the lower front to the lower left and right parts. 6. Join the lower back. 7. Join the visor bracket 8. Join the visor 9. Attach all small parts