Maxxgaming22

pencil toppers 

toilet paper holder

gear shifters

tire stems

sidbarret007

Modular Keychain Display stand designed to utilize the print bed size of the Bambu P1S, P1P, and X1C.&nbsp;The pieces are keyed to snap together. If you wanted it to be a bit more permanent add a little glue when assembling.&nbsp;The top is keyed to fit a 19.8mm cube as an extension for whatever sign you would like to attach. There is an an example of a free sign pictured you can find here if you would like to attach it. <a target="_blank" href="https://makerworld.com/en/models/214824#profileId-234122" rel="nofollow noopener">https://makerworld.com/en/models/214824#profileId-234122</a> &nbsp;&nbsp;

Keychain Display Stand

displays

special bottle

Tala16

heart gift box

gift boxes

glen.waelbers

Do you hate it when your towel flies away on a windy beach? For this reason I designed this easy to print one piece towel clip so you can anker down your towel to a chair.&nbsp;Please note that outdoor prints should be printed in a suitable material such as: PETG, ABS, ASA, PA, PC, …PLA will soften in the sun.

Towel clip for beach chair

towel clips

hair clips holder

Brithawkes

new vase from me easy to print in vase mode. you will need to reposition as imports on its side sorry when using STL. hope you like and happy printing

Leaf vase

vase

michal0082

Hello friends. Another day is here, and it&#39;s the right time for a new puzzle. We have another Paw Patrol puzzle today, and it&#39;s finally a girl. This model is not intended for A1 mini. However, you can export the data to RAW for printing on this printer. Due to the finer print, I recommend printing in Arachne mode. The printing profile is already set up, but I recommend checking it. I won&#39;t be uploading profiles for printing all colors at once anymore, but there will be plates for each color separately. Happy printing!&nbsp;Update: A printing profile with numbers and letters has been added. Without numbers and letters, you can find it labeled as NO SIGN. With numbers as NUMBERS and with letters as LETTERS. WARNING This toy is not intended for children under 3 years old. WARNING&nbsp;Do you like my work and would you like to support me? There&#39;s nothing easier than giving me a BOOST ticket.&nbsp;The next Paw Patrol puzzle can be found here: <a target="_blank" href="https://makerworld.com/en/@michal0082/collections/1033722" rel="nofollow noopener">https://makerworld.com/en/@michal0082/collections/1033722</a>&nbsp;You can find more toys here:<a target="_blank" href="https://makerworld.com/en/u/1621874954/collections/441100" rel="nofollow noopener">https://makerworld.com/en/u/1621874954/collections/441100</a>&nbsp;

Puzzle Paw Patrol - Skye (numbers and letters)

puzzles

Encrust3d

This is a case I made for the V1 and V2 apple air pods. This case may be a tight fit on your air pods, but it is to ensure your air pods do not fall out of the case and to make sure the lid does not fall off. V2 air pods are more snug than V1 air pods. If you are having a hard time removing your air pods from this case, you can use the charger to push the air pods out of the case from the bottom. I have uploaded two versions, one with a logo and one without. I would suggest turning off your AUX fan to prevent any warping that may occur. I have found normal supports to be the best supports to use for this case and both the lid and the top should be upside down when printing. Please do not sell my designs.&nbsp;If you would like a Gameboy Airpods case you can download it here: <a target="_blank" href="https://makerworld.com/en/models/136257#profileId-148217" rel="nofollow noopener">https://makerworld.com/en/models/136257#profileId-148217</a>If you would like an Adventure Time BMO Airpods case, you can download it here: <a target="_blank" href="https://makerworld.com/en/models/136265#profileId-148228" rel="nofollow noopener">https://makerworld.com/en/models/136265#profileId-148228</a>

Airpods case with Logo

air pod cases

LordMegaMonkey

Looking to add a personal touch to your eyewear and make a statement? Introducing my eyeglass accessories—the perfect way to express your individuality! Simply print and slide them onto your glasses for an instant style upgrade. They are available in four sizes (2mm, 2.5mm, 3mm, and 4mm) to ensure a perfect fit for your frames. If none of these sizes suit your needs, just drop me a comment or message, and I&#39;ll customize one for you.Do you have a specific design in mind? Let me know, and I&#39;ll bring it to life! Plus, it&#39;s a fantastic opportunity to put those leftover rolls of filament to good use. Print with a 0.2mm nozzle for optimal results, although a 0.4mm nozzle will suffice (though some intricate details may be lost). Elevate your eyewear game and enjoy the endless possibilities!

Ironman Eyeglasses Accessory

eye ass

Quantum.Grower

Welcome to The Smoke Room! If you&#39;re a fan of The Office and enjoy cannabis, then this sign is tailor-made for you!&nbsp;I printed this multicolor sign using <a target="_blank" href="https://bit.ly/3wDtXPo" rel="nofollow noopener">iiidMax PLA+</a> and TTYT3D shiny rainbow silk PLA (for the bong) on my Bambu X1 Carbon printer with the AMS.&nbsp;Similar model signs available:<ul><li><a target="_blank" href="https://makerworld.com/en/models/228568#profileId-246105" rel="nofollow noopener">The Grow Tent</a></li><li><a target="_blank" href="https://makerworld.com/en/models/219203#profileId-237969" rel="nofollow noopener">The Grow Room</a></li><li><a target="_blank" href="https://makerworld.com/en/models/222463#profileId-240595" rel="nofollow noopener">The Clone Room</a></li><li><a target="_blank" href="https://makerworld.com/en/models/226396#profileId-244094" rel="nofollow noopener">The Clone Tent</a></li></ul> Looking for other Cannabis related models? Please check my uploads!&nbsp;If you appreciate this model, please share your feedback along with a picture and rating. Your support is greatly appreciated! Thank you!

The Smoke Room

signs

tropicgtiturbo

lid/ roll tray for our stash box found below stash box https://makerworld.com/en/models/248939#profileId-265202

content advisory stash box lid/ rolling tray

weed

3ddruckandi

Snailring / Schneckenring&nbsp;Dieser Schneckenring hält Schnecken von ihrem Salat fern und da der Salat keinen Kontakt zum Boden hat bleibt dieser auch sauber.

Snailring / Schneckenring

plant shit

Sakkez Games

I needed to give a gift to a youtuber friend who is fond of video games...The keychain in the shape of the most famous console could not be missing from his collection Playstation Keychain Dimension 66x40x10mm&nbsp;you can reduce it even by 7/8% if you want it smaller The one you see in the picture is 66mm

PSX Playstation consolle Keychain

key chains

FunFam3D

Kitty Gnome jewelry holder&nbsp;Our Kitty Gnome jewelry holder is perfect for next to your sink to keep your precious jewelry safe while you wash your hands or get ready.The tray can hold necklaces, bracelets, or rings. Her adorable bell topped had doubles as a ring holder as well!

Bling Bling Kitty Gnome Bathroom Jewelry Tray

hello kitty

COMRADE_ZACH

This prints with no supports. I always print at .16 layer height to get good detail on the threads.

Joint, cigarette, doob, holder for 4 joints

lighter accessories 

Yobtnirp

The original mag for the gun was a little loose, also the creator hasn&#39;t made different mags for the gun, so I fired up fusion360 and made this drum mag. It should be a perfect fit, just remove all supports. If it&#39;s a little tight, try sanding the corners a bit.

Drum Mag for @RTX_Nitrox's Glock 19 v6, v7 & v8

guns

Beagle Bros Craft Co. 🐶

Peony Stanley Lid Topper!&nbsp;Great gift for mother&#39;s day; this topper matches the limited edition Stanley “Mother&#39;s Day” tumbler.&nbsp;30oz and 40oz uploaded as print profiles!&nbsp;Matching Peony Straw Toppers with a chain attachment also available <a target="_blank" href="https://makerworld.com/en/models/453873#profileId-361308" rel="nofollow noopener">here.</a>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453859/design/2024-05-04_f4933d9dcdbcb8.jpg"></figure>&nbsp;Supports are enabled in the file and needed.&nbsp;&nbsp;

Peony Stanley Lid Topper

straw toppers

Ibaviosa Baubles

Spinning jewelry display. Fully 3D printed. Magnetic top and storage space inside. Prints in 6 pieces with easy assembly. 15" tall assembled. 6-6x3mm magnets used for the lid. Can connect base and stand with a 3m screw. The circle piece glues to the bottom of the tower. Tolerances for the magnets and the pegs connecting the tower pieces are tight. Depending on your machines calibration it may need slight sanding to help fitting. Hope you enjoy the model, feel free to reach out with any questions!&nbsp;&nbsp;*Update - Added a new print profile with better tolerances for the tower pieces and magnets.&nbsp;

Spinning Jewelry Display

earring stands

Goblin

Nintendo Switch Controller Stand - 3D-Modell

Mario_Switch_Controller_Stand

Bellamys3DPrints

here we have a remix of a model based on the VR Game 'Gorilla Tag' i have edited the model to make it print in place

Print in Place Gorilla Tag Articulated Arms

toys

W.drop2027

<h2>Batmobile Wireless Mouse</h2><h4>Batman Chariots II</h4>The Batmobile is an integral part of the Batman saga, and for car fans, the Batmobile is fascinating！I craeted this shape batmobile from images and clips online with lots of simplified desige to print easier.<figure class="image image_resized" style="width: 65.84%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000471948/design/2024-05-22_4da381170ae8e8.png"></figure><figure class="image image_resized" style="width: 65.77%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000471948/design/2024-05-22_dc4c8e0d3b0c18.png"></figure>&nbsp;This model utilizes the Hardware Kit: Wireless Mouse Components Kit-002. In addition to the shell of the wireless mouse, the core components are general Bambu wireless components Includes mouse battery compartment and baseplate namely。&nbsp;All you need is one color to assemble a cool wireless mouse on your desktop.<h4> </h4><h4>Assembly diagram</h4><figure class="image image_resized" style="width: 69.63%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000471948/design/2024-05-22_24e729ef11187.png"></figure>In addition to the 3D printed workpiece you only need to buy an additional 5 battery.&nbsp;&nbsp;

Batmobile Wireless Mouse

computer mice

jbogusz

This is a deck box for Pokemon cards. It holds about 2 full decks. The top snaps on. This is quick and easy to print. It is printed in 4 parts across 3 plates of White, Red and Black. The bottom and button in white, the top in red and the ring in black. The ring is glued into the bottom white piece. The button is glued to the black ring after the ring glue sets and with the red top put on and closed. Center the button in the space and glue it. Load with cards and battle on!

Pokemon Deck Box

cards

ThemeParkBoy

Indulge your sweet tooth and elevate your style with our irresistible Gummy Bear Croc Charm! Crafted with precision using cutting-edge 3D printing technology, this delightful accessory is a whimsical addition to any collection.&nbsp;Each Gummy Bear Croc Charm features intricate details that capture the fun and vibrant spirit of everyone's favorite candy. From their adorable shapes to their translucent appearance, these charms are sure to add a playful touch to your everyday items.&nbsp;Attach our Gummy Bear Croc Charm to your backpack, keychain, or Crocs to instantly inject a burst of color and personality into your ensemble. With a range of flavors and colors to choose from, you can mix and match to create a look that's as unique as you are.&nbsp;Whether you're a candy connoisseur, a fashionista looking for a fun accessory, or simply someone who loves to add a touch of whimsy to their life, our Gummy Bear Croc Charm is sure to satisfy your cravings. Treat yourself to a dose of sweetness and add a playful twist to your accessories today!

Gummy Bear Croc Charm

jibz crocs

Stag 3D

<h2>Geometric Stags Head Decor</h2>A modern and contemporary stags head decoration, the perfect addition to any home. &nbsp;The prints pictured are in Bambu PLA Matte white and PLA Galaxy Black. &nbsp;

Stags Head Decor

decorative 

BENOengineering

Protect your beer with this can cover against wasps, bugs and other co-drinking persons :)The bottom snaps onto the top of a 0,5L - 0,33L (short) - 0,33L (long) can. If you want it to work with a 0,25L can, scale both parts to 0.96.Easiest way to assemble is by gently squeezing together the circle of the bottom part and slide the top into the hinge-part.&nbsp;Check out the alphabet-version as well:<a target="_blank" href="https://makerworld.com/en/models/458456" rel="nofollow noopener">https://makerworld.com/en/models/458456</a>&nbsp;Commercial license you can get here:https://buymeacoffee.com/benoengineering/e/265720

Beer protector

useful 

WEED LEAF ASHTRAY

Koni205

Controller Halter für 2 PS5 Controller.

PS5 Controller Holder

video game

t147caddy

Did you recently print the Tiny Trailer Hitch by Alobal or the 2&#34; Mini Hitch by Qjeezy but something was still missing you thought? &nbsp;Well how about some matching Tiny Nuts to hang from it?

Tiny Nuts for Tiny Hitches

earrings 

lasse1999

Set of Coasters in 6 different patterns, print them all or the one you like. Each one have a seperate plate in the print profile. Mine are printed in PLA, mostly used for cold or room temperated drinks. But for hotter drinks, they could be printed in PETG or ABS/ASA for better temperature resistance. They are 90mm in diameter and 5mm thick. Remember to print the station/holder for the coasters.