Matthewa_b

DevonR

<p>Removed those useless sun visors? This model is an easy-to-print block-off plate that fits Mk1 and Mk2 MX5/ NA and NB Miata.<br> </p><p>It uses the stock hardware to install and only takes 2 minutes.<br> </p><p>The models in the pictures are printed with a variable layer height but <strong>0.2mm</strong> would work great. The pictured model has also been sanded, primed and painted.</p>

Mazda Miata (MX5) Sun Visor Delete Plate

Mmmmiataaa

Hamstah

<h2><span style="color:#E14747;">WARNING</span></h2><p>Extreme caution should be used when modifying hotend plugs. Any damage to the plugs could render the hotend unusable, and any issues causing the plugs to not fit correctly could damage your printer. Please ensure that everything fits correctly when using this model. Please do not use excessive force when installing the grips, and please make 100% certain that the plugs fit correctly in your print head once they are applied. If the plug grips refuse to fit, don&#39;t use excessive force. Calibrate your filament and reprint. Over-extrusion can make it difficult or impossible to install the grips without damaging the plugs.</p><p>&nbsp;</p><h2>Description</h2><p>I frequently change my hotends because I print most of my normal items with my 0.4mm hotend, my high detail items with the 0.2mm hotend and my CF, GF and sparkle filaments with the 0.6mm and 0.8mm hotends. I change them so frequently, I got frustrated with how fiddly it is to change the plugs in particular.</p><p>&nbsp;</p><p>These grips significantly speed up the swapping process and also make me much less worried about breaking the connectors on the main board. An additional bonus is it&#39;s quicker to identify my hotends by colour, and you can clearly see which hotend is installed with a quick glance through the window on the side of the printer head.</p><p>&nbsp;</p><figure class="image image_resized" style="width:32.93%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000451390/design/2024-05-02_d00e0ee89fc48.png"></figure><p>&nbsp;</p><h2>Installation</h2><p>To apply the plug grips, please follow these instructions carefully. If the plugs don&#39;t fit or you feel like you are using excessive force to install them, stop and calibrate your filament. If your filament is over-extruded, it could cause the plug grips to be too tight to properly install. Please use caution and be sensible when installing this modification.</p><h3>- Heater Grip</h3><p>This is the largest plug with two thick, stiff wires.</p><p>&nbsp;</p><p>Slide the wings on the heater grip into the two slots from the top. Ensure that the clip on the top of the heater grip is on the top side as in the image below:</p><p><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000451390/design/2024-05-02_e88b3fa0a2443.png"></p><h3>- Fan Grip</h3><p>This is the plug with four wires - one black, two grey and one white.</p><p>&nbsp;</p><p>Push the fan plug up through the hole in the bottom of the Fan Grip. Then clip the wings on the fan grip into the slots from the top. Ensure the black wire is on the left and the white wire is on the right when viewed from the top.</p><p><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000451390/design/2024-05-02_debbe80640624.png"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000451390/design/2024-05-02_9f5326c5509c1.png"></p><h3>- Thermistor Grip</h3><p>This is the smallest plug with two thin black wires.</p><p>&nbsp;</p><p>Push the plug in sideways into the plug grip as depicted. There is a gap for the wire to rest in. This grip is designed to flex a little in order to allow you to squeeze the grip to release it from the connector on the main board.</p><p><strong>IMPORTANT</strong>: this plug clips into the main board. Do not use excessive force when pulling it out. When squeezed, the plug grip should release the plug from the main board - if it does not, carefully remove the grip sideways from the plug before unclipping the plug from the main board.</p><p><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000451390/design/2024-05-02_4a958f9e94958.png"></p><p>&nbsp;</p><h2>Instructions for use</h2><p>Once your plug grips are properly installed onto the hotend plugs, install the plugs in the following order:</p><h3>Step 1</h3><p>Slide the cable for the thermistor under the cable guard and install the thermistor plug with the cable going downward through the cable channel on the thermistor plug grip as shown.</p><p>&nbsp;</p><p><strong>IMPORTANT</strong>: This plug is designed to clip into the main board. When correctly installed, you should feel resistance when you gently pull on it without squeezing the plug grip. It is extremely important that this plug is correctly installed to ensure the printer knows the precise temperature of the hotend.</p><p>&nbsp;</p><p><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000451390/design/2024-05-02_c5b7719f9c3ca.png"></p><h3>Step 2</h3><p>Plug in the heater plug with the top clip on the heater plug facing upward.</p><p><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000451390/design/2024-05-02_92d7b5c484b64.png"></p><h3>Step 3</h3><p>Install the fan plug with the bottom of the grip facing left allowing the wires to come out toward the hotend. The black wire should be at the top and the white wire at the bottom. This plug grip is larger than the others to enable it to be easily unplugged first when removing the plugs in reverse order.</p><p><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000451390/design/2024-05-02_b5e9ccedec2ea.png"></p><p>&nbsp;</p><h3>Unplugging the hotend</h3><p>Follow the steps above in reverse:</p><ol><li>Unplug the fan plug</li><li>Unplug the heater plug</li><li>Unplug the thermistor plug</li></ol><p>As mentioned above, please use extreme care when unplugging the thermistor. If it doesn&#39;t slide out with minimal pressure, you must not use excessive force or you could damage the main board. If it won&#39;t come out easily when you squeeze the plug grip, attempt to remove the plug grip by sliding it to the right before unclipping the thermistor plug.</p>

X1C Hotend Quick Swap Plug Grips

小厮工作室

<h2>Carrot-shaped snack clips</h2><p>After the green and orange prints are completed, rotate 90 degrees to snap them in</p>

Carrot snack clips

Carrot

UltimatePyro

<p>Fits perfect as the bottle has a diameter of 41.5mm and the Gridfinity single square is 42mm. Meant for 4oz bottle.  No supports required. </p>

Gridfinity Super Lube Holder

Gridfinity 

MiniRacer

<p>Counter Strike 2 M4A1-S Printstream Remix from iClints Models</p><p>Currently printed with a Simple 2 tone White and Black PLA, with fixed/Adapted models such as</p><p>-added optional Suppressor </p><p>-fixed/changed Various models </p><p>(Removed Hand Guard's gas tube, rail clamp sizing, Small part fixes for X1-C, Added Supports/Quality of prints, etc.)</p><p>-Created plates with out the gate 3mf printable settings that are (Hopefully) very efficient</p><p>&nbsp;</p><p>Vastly still designed/Created by iClints Models,</p><p>&nbsp;</p><p>With the included parts on Plate 5, there is still needed various M3 Screws and Springs to make this prop function correctly (Triggers, mag drop, stock lock, and charging handle). I bought both an m3 screw kit ($13) and spring compression assortment kit ($14) on amazon that came with well over enough parts to make 30 of these. And I did use super glue on a couple connections (from gas tube to hand guard, butt pad, etc.). Other than that its designed that cut pieces of 1.75mm filament to fill pin holes to align various parts. </p><p>This is still a prop, This doesn't fire anything. </p><p>&nbsp;</p><p>Attached is a original PDF that has Step-by-Step Instructions on creation of print.</p>

Mmmmiataaa

P1S

Carrot

Gridfinity

Stuffs