MatRod3D

justinds89

This is a combination of two different models that I tweaked quite a bit to make it right. I used the model Grumpy Pumpkin and Vampire Bust Sculpt.https://www.thingiverse.com/thing:159638 https://www.thingiverse.com/thing:37741There is a standard version and one with the fangs pre-supported that may be helpful.BTW, you can make the stem a different color by pausing it at the right layer and switching filament. I did this and made the pumpkin part orange and the stem brown which worked well.

Vampire Pumpkin

HALLOW33N

Yedoggie

Suspended or String Art, It took a while to figure out people have been designing them, but I have finally figured it out. I designed this for my Wife&#39;s desk at her medical office and wanted to share. &nbsp;The letters can be edited on Bambu slicer. Set the Brain and Spine color on the left and then you can paint the outer structure. (It will be hard to paint the brain and spine if you do not go this route).&nbsp;Set to Arachne to be able to print the strings.Min Wall width is 100%

Suspended Brain and Spine

Suspended/StringArt

Donald Sayers

Fits on both normal and slim cans. My partner asked to make one of these and we whipped one up in a couple of minutes.Impress all your friends by showing this off at your next party. Great little gifts and quick to print. I printed these in ASA which shrinks a bit, you might have to scale it down a tiny bit to get the perfect fit. (like .5%)print in the orientation the file is already in.

Swivel Can Cover

BEVERAGEZ

Borgecmedia

My latest and greatest(?) credit card multitool, this time all about fire. Includes a knife, ferro rod and striker, a space for a matchbox striker and a compartment for fire starters or matches.Video here: <a href="https://youtu.be/SoL4115FAJI" rel="nofollow">https://youtu.be/SoL4115FAJI</a><h3> Print Settings</h3>Printer Brand:CrealityPrinter: <div>Ender 3</div>Rafts:YesSupports: <div>Yes</div>Resolution:highInfill: <div>25</div> Filament: na PLA red Notes: <div>Print with the ferro rod end on the bottom, with the card standing up</div>Category: Sport & Outdoors

Fire making wallet kit

CAMP/Hike

maxv

Two sizes of Silica Gel containers - Small and Medium &nbsp;Small is 20mm highMedium is 32mm high&nbsp;For comparison the usual silica gel container models are around 50mm high.

Silica Gel Container - Small & Medium

Containers

Fresh Brewed Design

Your cat(s) deserve the freshest canned meat product and nobody wants old cat food lurking in the back of their cabinets. This dispenser serves up your cans in first-in, first-out order. The dispenser prints without supports and no hardware or glue is required for assembly.&nbsp;Design<ul><li>Holds 8 3oz cans per dispenser (note: tested with Fancy Feast cans which have about a 66mm diameter and a 37mm height - you may want to check your cans before printing if you prefer a different brand)</li><li>Cans roll smoothly from top to bottom for easy loading</li><li>Fits in a 12in deep cabinet</li><li>Slim profile makes it easy to fit multiple dispensers side-by-side</li><li>Printable on a 180x180mm print bed (e.g., Bambu A1 Mini, Prusa Mini)</li></ul>Dimensions (LxWxH) 280.5x47.6x172.8mm&nbsp;Print settings Nothing special. I test printed with PLA and slicer defaults. STLs are oriented as recommended for printing.&nbsp;Assembly Assemble by sliding the corresponding dovetails together. When assembled correctly, your pieces should all sit flush on both the interior and exterior surfaces. The dovetails should be a fairly tight fit.<ol><li>Print all four components (left front, left back, right front, right back)</li><li>Attach left front to left back and right front to right back by sliding the dovetails together. Ensure all 3 dovetails are engaged on each side. You may find it easiest to partially engage the larger dovetail at the bottom before aligning the middle and top dovetails.</li><li>Attach the left half to the right half by sliding each set of dovetails in from the bottom. You may again find it easiest to start from the bottom. Just make sure top, middle, and bottom dovetails are secure front to back.</li></ol>Notes<ul><li>If you have a larger printer, I&#39;d love your help in testing out additional sizes. I may also do a 12 can version in 6 parts if there&#39;s interest!</li><li>If you plan to remix this, be aware that most cans aren&#39;t simple cylinders. In real life, the cans sit at a slight angle due to the lip around the top. This increases their total width by enough to make a difference. The design accommodates this to avoid an otherwise dispenser-jamming amount of friction between the cans and the side wall.</li></ul>Inspiration/credits<ul><li><a target="_blank" href="https://www.thingiverse.com/thing:4428664" rel="nofollow noopener">Aeris - Cat Food Can Dispenser (modular) by Erdrick</a></li><li><a target="_blank" href="https://thenounproject.com/icon/cat-6048434/" rel="nofollow noopener">Cat icon by Kim Sun Young on The Noun Project</a></li></ul>

Cat Food Can Dispenser

AU3D

Set of 81 sizes of IKEA Skadis pegboards. To enhance user convenience, I&#39;ve organized the files and print profiles based on the number of columns. The board are prepared for M4 countersunk screws (M3.5 will work as well, M3 probably too, but not tested). You can install these boards using my <a target="_blank" href="https://makerworld.com/en/models/418874" rel="nofollow noopener">IKEA Skadis Screw Spacers</a> which are available in 3 sizes ranging from 10 to 20mm.&nbsp;If you plan to install more than one of these boards in an array or a tiled setup, I recommend my <a target="_blank" href="https://makerworld.com/en/models/423635" rel="nofollow noopener">drilling jig</a> for this board that helps you align multiple boards as well as my <a target="_blank" href="https://makerworld.com/en/models/456425" rel="nofollow noopener">Multi Spacer Pack</a>:<a target="_blank" href="https://makerworld.com/en/models/423635" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000418809/design/2024-04-11_5d0270881036c.jpg"></a><h3>Skadis Collection</h3>I am constantly developing more IKEA Skadis attachments. Check out my<ul><li><a target="_blank" href="https://makerworld.com/en/u/2942852598/collections/453266" rel="nofollow noopener">IKEA Skadis Shelves, Trays and Container Collection</a></li><li><a target="_blank" href="https://makerworld.com/en/u/2942852598/collections/188108" rel="nofollow noopener">General IKEA Skadis Collection</a></li><li><a target="_blank" href="https://makerworld.com/en/@AU3D/collections/1044616" rel="nofollow noopener">IKEA SKADIS Boards Collection</a></li></ul>

IKEA Skadis

david.gauthier89.dg

This is for my blunt and king size hand rolled smokers!&nbsp;I call this “The Revolver”! Holds 6 sticks and some fire. Pack up for your trip, cmaping, hiking, day on the lake, in the woods, or whatever else and always have your smokes and lighter in the same place.&nbsp;This product is not smell or water proof, however it is RESISTANT to smell and water to an extent. It&#39;s hard to smell the contents thru the case until it is opened. And I have tested this case under running water, in which the contents were dry after (I have not tested by submerging as of yet).&nbsp;I do plan on making a few alterations in the future, like adding an o-ring and maybe a hook for a keyring to attach to a bag.&nbsp;*The uploaded pictures were of the first alteration/print. Since then, I have uploaded the model into Fusion 360  to smooth out the sides and some edges. Updated photos will be posted shortly.&nbsp;Happy printing!!

The Revolver

Sm0k!ng

Tom.zrk

This Christmas tree exudes a playful and whimsical charm with its unconventional shape. The branches seem to dance in a lively rhythm, creating a one-of-a-kind festive display. Its distinctive form adds a touch of joyful character to the holiday atmosphere, making it a memorable centerpiece for seasonal celebrations

boobe Christmas Tree

XMAS

UMarts3D

I love to use Pa6-gf filaments but you can use everything you want!

Tree Fantasy Lamp 

LorenzCR

Balloon Dog Loves Peeing It does not require AMS, the pieces are individually molded and assembled without the use of glue.Do you like Balloon Dogs? I have created many more, discover them all by following the links below:  <h2><a target="_blank" href="https://makerworld.com/en/models/248432#profileId-278582" rel="nofollow noopener">Balloon dog with Easter eggs</a></h2><h2><a target="_blank" href="https://makerworld.com/en/models/405080#profileId-306919" rel="nofollow noopener">Balloon Dog Loves Peeing</a></h2><h2><a target="_blank" href="https://makerworld.com/en/models/400316#profileId-301806" rel="nofollow noopener">Dog balloon with flower</a></h2><h2><a target="_blank" href="https://makerworld.com/en/models/380811#profileId-281037" rel="nofollow noopener">Balloon Dog Dachshund</a></h2><h2><a target="_blank" href="https://makerworld.com/en/models/379086#profileId-279135" rel="nofollow noopener">Balloon Dog</a></h2><h2><a target="_blank" href="https://makerworld.com/en/models/372368#profileId-272299" rel="nofollow noopener">Balloon dogs in love</a></h2><h2><a target="_blank" href="https://makerworld.com/en/models/255351#profileId-271748" rel="nofollow noopener">Dog Balloon Skillful With Bone</a></h2><h2><a target="_blank" href="https://makerworld.com/en/models/252447#profileId-268797" rel="nofollow noopener">Balloon Dog Stretches</a></h2><h2><a target="_blank" href="https://makerworld.com/en/models/250197#profileId-266447" rel="nofollow noopener">Balloon dog that wants to play</a></h2><h2><a target="_blank" href="https://makerworld.com/en/models/426231#profileId-330026" rel="nofollow noopener">Balloon Dog Desires Bone</a>  </h2>Do you like Balloon Dogs and would like to sell them in your store? No problem, <a target="_blank" href="https://www.patreon.com/LorenzCR/membership" rel="nofollow noopener">sign up for my Patreon</a> to get the business license.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/850444/2024-04-01_da01944555c1a.jpg"></figure>

Balloon Dog Loves Peeing

DAWG

Stephe74

GoPro Halterung für Klim Krios Pro. Kinnhalterung.

GoPro chin mount for Klim Krios Pro

E-BiKE

Kt's Glitter Bar

Printed with standard 0.12mm layer height setting with 0.2mm nozzle. The only settings I change is wall generator to Arachne and only 1 wall on first layer. I printed on a holographic mat for the glitter effect.Hole for earring ring is 2mm diameter. &nbsp;I buy my earring hooks on amazon.

Butterfly Earrings

JEWELRY

LoboCNC

This is an update of my HexMaille fabric, with cleaned up edges and two different size options.Most 3D printed fabrics have a bajillion tiny vertical sections that are fragile and take forever to print. They also end up being kind of thick. This version used hexagonal rings to connect the tile sections, which produces a much stronger, thinner fabric. And it prints more quickly. The small, pocket-fidget sized patch prints in just 21 minutes. The larger, more luxurious swatch prints in under 2 hours.I printed this in PLA. Use 0.2mm layers to maintain the gaps between the tiles and the connecting rings.After printing, the connecting rings need to be broken free from the tiles. Just pinch two adjacent tiles between your thumbs and index fingers and wiggle them relative to each other. You'll hear a little crackling as the joints break free. Repeat for all the tiles in the swatch!&nbsp;

Quick Print HexMaille

Art!culated

MechEng67

This design features a compartment to store Keurik K-Cups beside your machine. The cups are completely out of sight and fall into the drawer one by one. Pull out the drawer to get a cup, push it back in and another cup will be available on the next pull. The only non-3D printed parts for this assembly are some optional magnets to keep the unit attached to the Keurig. The front token can easily be redesigned to add a personal touch. It fits about 16 cups, I used the cups from Costco but it should fit any standard Keurig cup.&nbsp;Note: The internal parts of the mechanism will differ slightly then what you see on the photos as I adjusted some angles and combined two parts into one. These are improvements over the original design (pictured) to help have fewer jams. &nbsp;I recommend alternating the orientation of the cups when putting them in. You can fit a few more cups and it jams a lot less. With the new design, I am confident it will jam less than 2% of the time. If it does jam, simply push the drawer back in and pull it back out, it should solve the problem.&nbsp;I&#39;ve included the CAD files if you wish to adjust anything. If you print it, please share a photo, I would love to see it!&nbsp;Let me know if you have any question.&nbsp;***Update 2024-04-27*** Based on feedback from others, I have increased the width of the compartment and drawer by 3mm to help avoid jams. Some pods are prone to “pressurize” and expand making them taller which can cause them to get stuck. The height of your pods should remain at no more than 48mm for this to work well. If they are taller than that, consider increasing the width of the design some more. CAD files are included.

Keurig K-Cup Dispenser (Hidden Cups)

KITCHEN

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/276656/2023-12-16_dv15l3hbjp4k.gif"></figure>There are a couple of problems with most of the 3D printed flying rings: Firstly, it's difficult to get the right mass distribution with 3D printed plastic. Secondly, they are damnedably difficult to throw with the proper spin, and liable to tear your rotator cuff.This is a rubber band launched version that derives its spin from the angled fins that connect the ring to the central “stick”. The stick itself solves the mass distribution problem allowing you to have a uniformly thin ring, yet still get enough mass out front to locate the center of gravity at the center of lift. And minimal cross sectional area minimizes drag.Launching with a rubber band, however, presents it's own challenges as the lower part of the circular wing wants to hit the launching stick. To solve this, I've used an articulated stick where the business end springs forward out of the way once the rubber band launch tension is released.Note: I've completely updated the launcher so that it releases the glider more reliably.Printing Both the glider and the launcher print without supports. I used 0.2mm layers and have printed this in both in PLA and PETG (PETG is more durable). The ring prints at a single-wall extrusion, so you need to have well-tuned retraction so that you don't end up with any gaps or thin spots in the walls. Lastly use at least 5 perimeter lines and 90-100% infill so that the stick portion prints solid.Assembly The stick should slide into the center of the ring and then bump up against a little stop on the stick. The fins should be towards the back of the glider, with a short section of the stick protruding out the back. (See 1st photo.) You may need to sand any lumps off the end of the stick if it doesn't slide in easily. Use a couple drops of superglue to glue the stick in place.For the launcher, insert the articulated arm into the handle and then shove the pin in one side. It should be a slight press fit, but you'll want to use a drop of superglue on the head of the pin to hold it in place. To make it spring forward, pass a #33 rubber band through the hole, twist the two sides together a few times and then stretch the loops over the handle as shown in the 3rd photo.For the launching rubber band, use another #33 rubber band and looped through the hole in the articulated arm.Launching Hook the “arrow” end of the stick onto the launching rubber band as shown in the 2nd photo. As you stretch it back, it should also cock back the articulated arm on the launcher. Hold the launcher so that the arm is more or less vertical. Stretch the rubber band all the way taut and aim upward about 10 degrees. Then let ‘er rip!Using one #33 rubber band, I've gotten flights about 30+ meters. With two rubber bands in parallel, my maximum flight distance was 57m.Repairs The glider is light and flexible, so it pretty much just bounces when it lands. However, if you hit anything at speed, you may crack the thin ring. Minor cracks can easily be repaired with transparent tape or masking tape. As you can see below, after whacking into a number of trees, fences and walls, the glider can endure quite a few repairs and still fly well.<figure class="image image_resized image-style-align-left" style="width:42.93%;"><img src="https://makerworld.bblmw.com/makerworld/draft/276656/2023-12-16_4fpm0m7o4yeo.jpg"></figure>

AutoGyro Ring Glider

Planes

Muad'Dib

Addiction Recovery Awareness sign. When printing in layers, just pause it at the right layers so can swap colors. Made to fit most 5x5 wooden boxes like from Michaels or Amazon.

Gone But Not Forgotten - Recovery Awareness

RECOVERY/Addiction

OJum2

logo ps5

GAMING

MakerVerse Designs

Fully 3d printed crocs shoes<ul><li>Printed with Overture TPU</li><li>PLA for the snap button</li></ul>Important notes:<ul><li>It is for EU shoe size number 42 (male), but you can scale every part (CrocsL1,CrocsR1,Holder,Mount1,Mount2) to your size (use uniform scaling)</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-04-19_0266f756a989a.png"></figure><ul><li>If the shoe is too big to fit to the printers height, use the “WithSupport”-Version, rotate in Y-Axis (green) and use the cut tool in Bambu Studio to create a new flat surface parallel to the print bed<ul><li>I uploaded an .stl file without cut on the bottom for better scaling</li></ul></li></ul>&nbsp;<ul><li>There are two ways to print this:</li></ul><ol><li>Use a textured PEI bed and print it standing up without support</li><li>Or use another not so sticky bed and print it standing up with support</li></ol><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-04-12_cc0523cbae068.png">&nbsp;If you can&#39;t get enough of printed shoes, check out my new model (Slide Shoes, Adilette):<a target="_blank" href="https://makerworld.com/en/models/488792#profileId-401842" rel="nofollow noopener">https://makerworld.com/en/models/488792#profileId-401842</a><img class="image_resized" style="width: 41.76%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-06-08_bb258037ea2a1.png">Have fun with it and leave a like or subscribe if you like it!If there are any suggestions for improvement, feel free to write a comment.

Crocs Shoes - Fully 3d-printed

mitchrichie

I’ve been wanting one of these extremely rare German made mid-century mantle clocks but they are really difficult to find and when you do find them they go for $1,000 - $2,500. So I decided to try and 3D print a replica. While not perfect, I like how it turned out.Printed on p1p. For fake wood appearance I did some sanding, then automotive body filler/primer. Then light brown colored spray paint with dark wood stain brushed on for the final coat.&nbsp;For the face of the clock, use ironing to make for a smoother finish. For the clock body, use adaptive layer hight for best results.&nbsp;I used a <a target="_blank" href="https://www.walmart.com/ip/21695068" rel="nofollow noopener">cheap clock movement from walmart</a> as the clock internals. It's a 1/4 in (.63 cm) shaft and a 2.5 in (5.71 cm) housing. The clock movement come with second, min, an hour hands but I discarded those and designed min and hour hands that press fit onto the shaft of the clock movement. &nbsp;The small dots are decoration that press fit into the face of the clock. Same for the narrow strips. You'll need to trim these down to size as you press fit them into the clock. If they are too tight you can play with scaling them down slightly. &nbsp;The original clock had 3 ports used for setting the time and winding the movement. I've included them here has decoration only. Easiest to press fit these in from the back of the face.&nbsp;For the legs, you can place them by eye or do some measuring to get them in the same location on the bottom of the clock body. I may add registration holes at some point.

Mid-Century Welby Mantle Clock 

CLOCKS

cv6Channel

Three X-Mas Skull for your X-Mas tree. Design is visible from both sides. &nbsp;I printed this on a PEY Plate to get a nice glitter effect. Shiny!&nbsp;If you download the stl file, make sure to split it into parts, or do an assembly depending how your slicer handels the objects. Then you can colorize it on your own on an object base.&nbsp;See other X-Mas Skulls in my <a target="_blank" href="https://makerworld.com/en/u/707011393/collections/81861" rel="nofollow noopener">X-Mas Collection</a>.&nbsp;Images from <a target="_blank" href="https://www.etsy.com/de/shop/EuIllustration" rel="nofollow noopener">Tom</a>.

X-Mas Skull tree ornament -  AMS

hsispeg

Universal seat belt buckle silencer / muter / plug (or however you name it). With “seatbelt” sign so you don&#39;t forget to take it out when the seat is occupied.

Universal seat belt buckle silencer / muter / plug

CAR Accessories

Pestregen

A divided, labeled and stackable bin, 3x1, 6 units high, with 6 compartments. Ideal for little screws, or other tiny stuff.

Gridfinity divided labeled stackable bin 3x1x6 x6

GR!DF!N!TY

PavorMaker

Hello, &nbsp;I was looking for a simple protection sure and safe when i store my battery 18650. It&#39;s a single protection and you can now keep your battery safe in your pocket or in your bag. No support is needed and no specific parameter is required for the slicer.&nbsp;I hope this design will be useful for you !Peace :).

Protection Battery 18650 Single

VAPE

Rober7Crow

New update available 18.04.2024 at : <a target="_blank" href="https://makerworld.com/en/models/433967#profileId-338755" rel="nofollow noopener">https://makerworld.com/en/models/433967#profileId-338755</a>  Changes :-the possibility of taking one tablet a day-the possibility of taking two tablets a day-larger size and easier accessibility-smaller version available-no more lifting and no mixing of the smaller tablets inside box-when you turn the knob for the first time, the cover locks and is released when the refill appears again-more reliable stopping at the right position and a click appears<figure class="image image_resized" style="width:59.14%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000174640/design/2024-04-18_141c21ad02896.jpg"></figure>    I&#39;ve found a solution to easily find a tablet when you&#39;re still quite sleepy.When I saw the challenge I thought I should make something easy to put together.  Now I won&#39;t have to look for pills anymore and they will be ready.  I made a weekly pill dispenser so that it is easy to refill on Sundays.Update:9.2.2024 added bigger version for 20%Update: 11.2.2024 added higher for 15mm and sample cupsUpdate: 19.02.2024 added cover in German language Update: 02.03.2024 added cover in French language Update: 21.03.2024 added cover in Czech language <h3>If you want the covers in another language, please leave a comment and I will prepare it for you.</h3>Below is a picture of how easy it is to assemble.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000174640/design/2024-02-06_b997b305e5207.png"></figure>Use a silica gel and insert it into the bottom slot so the tablets stay dry. <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000174640/design/2024-02-08_eb016ce497945.jpg">

Weekly pill dispenser

MEDICAL

joshua.makes

Introducing our latest innovation, the Enhanced Snap-On Tool Box! Building upon its <a target="_blank" href="https://makerworld.com/en/models/193491#profileId-213900" rel="nofollow noopener">predecessor</a>, and taking into consideration a lot of the feedback received, this meticulously crafted toolbox combines strength, functionality, and ease of use to meet the demands of even the most discerning users. Featuring a print-in-place hinge for the lid and two outside hinges for smooth operation, opening and closing are a breeze. The addition of a "half pulled out drawer" acting as a handle ensures effortless access to the main drawer.&nbsp;But that's not all – we've opted for 623-2rs bearings for continued maneuverability, making it a breeze to navigate your workspace or desk. While a bit of glue may be needed for the front face assembly, rest assured that our design ensures a secure and reliable construction. Just remember to handle with care when removing supports and installing the wheels. With swivel wheels designed for snug rotation and fixed wheels ready for secure installation, this toolbox is engineered to elevate your work experience to new heights!&nbsp;Key Features:&nbsp;Optimized Design: The Enhanced Snap-On Tool Box boasts a print-in-place hinge for lid strength and two outside hinges for smooth operation, ensuring effortless opening and closing. The outside hinges require a single M3x20 button head screw each.&nbsp;Convenient Handle: With a "half pulled out drawer" serving as a handle, accessing the main drawer is quick and easy, enhancing overall user experience and efficiency.&nbsp;Upgraded Wheels: Featuring 623-2rs bearings with M3x10 button head screws as axles, the wheels of this toolbox offer enhanced maneuverability, allowing you to navigate your workspace with ease and precision.&nbsp;Secure Assembly: While a bit of glue may be required for the front face plate and top lid, our design ensures a secure and reliable construction for lasting durability.&nbsp;Careful Installation: Extra care is needed when removing supports and installing the wheels, ensuring proper assembly and functionality.&nbsp;Tailored Performance: Swivel wheels are snugly fitted for smooth rotation, while fixed wheels are designed for secure installation, providing a balanced and efficient movement across various surfaces.&nbsp;On it's own or <a target="_blank" href="https://makerworld.com/en/models/193491#profileId-213900" rel="nofollow noopener">paired with the original</a>, Experience the next level of efficiency and durability with our Enhanced Snap-On Tool Box – the ultimate companion for your workspace needs!&nbsp;🔄 623-2RS Ball Bearings🔄: <a target="_blank" href="https://amzn.to/3Iw0fOS" rel="nofollow noopener">https://amzn.to/3Iw0fOS</a>&nbsp;🔩 M3 Button Head 🔩: <a target="_blank" href="https://amzn.to/48KMBSZ" rel="nofollow noopener">https://amzn.to/48KMBSZ</a>&nbsp;🧴 Gorilla Glue 🧴: <a target="_blank" href="https://amzn.to/3v6zpKb" rel="nofollow noopener">https://amzn.to/3v6zpKb</a>&nbsp;*If you purchase an item through the links provided, I may receive a commission. This helps support my work and enables me to continue providing valuable content. Thank you for your support!*

Snap-On Desk Tool Chest w/ Lid Business Display

OFFICE/Biz

Imagine-Reality

I made this Djembe for a local music education program that caters to a diverse audience, ranging from infants to 5-year-olds, introducing them to the fundamentals of music through rhythms, beats, total patterns, and rhythm variations.Additionally, this program extends their efforts to enhance the lives of seniors, particularly those facing dementia. Their innovative approach involves using music therapy to help individuals regain certain abilities, such as manipulating objects and sustaining activities. This becomes particularly crucial when traditional communication and other skills have started to decline. For residents in assisted living, incorporating drums and various instruments into their daily exercise routine promotes physical activity and cognitive engagement, focusing on elements like rhythm and stick movement.&nbsp;The profile is set to print in 2 colors to visually separate the drum head from the body.&nbsp;I recommend printing this in PETG. PLA works great, too, but PETG seems to have better tonal qualities. At least to my ears.

Djembe - Hand Drum

Musical

West-DEV

This Half-Mask was designed to demonstrate what a military respirator might look like in the future. Naturally, as a cosplay prop, it can be used or modded to fit a number of original concepts and characters. If you want to attempt to one-shot this model you can go <a target="_blank" href="https://makerworld.com/en/models/245606" rel="nofollow noopener">here</a>. I suggest scaling the model down to around 97% to fit most faces. Also, tree supports made this project possible. <img src="https://makerworld.bblmw.com/makerworld/draft/700109/2024-03-10_b0fa7fce5b8e9.jpg">This version was printed in Wood filled PLA on a QIDI X-Max and it took up most of the build plate. &nbsp;(that is a build volume of 300 x 250 x 300 mm)&nbsp;If you have a problem with retractions, make sure to print the propellors separately.&nbsp;&nbsp;Lastly, if you hate sanding and painting…&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/700109/2024-03-10_f462d0a66f06e.jpg"></figure>Silk PLA looks good too 😁.

All parts, single print, Military Cyberpunk Mask 

costume/cosplay

pixel_design

This is a quick and easy print to make a case for your Raspberry Pi Zeros. Works with Zero 1 and 2. The case snaps together nicely and has hexagon hole pattern for ventilation, as well as IO cutouts for the HDMI, Micro USB, SD card, and camera port. Print with 100% infill, no supports needed.

Raspberry Pi Zero Snap Case v2

TECH

Tech2050

Triple guitar pick, all credit for the design goes to Mattias Krantz on Youtube, 1st shown in his youtube short:<a target="_blank" href="https://www.youtube.com/shorts/oYxg5uaIFnE" rel="nofollow noopener">https://www.youtube.com/shorts/oYxg5uaIFnE</a>&nbsp;&nbsp;

Triple Guitar pick

GUITAR

Asdfgasdfg

Be careful downloading prints called “Fast” etc, those might be faster but that's because of a weaker design, they are spammers just taking the original profile, lowering the integral strength to get it to print faster, and as explained below, there needs to be a balance in the force of the spring and the rubber band. Those profiles might not work as well as intended. Its just spammers racing to the bottom, give them enough attention and soon there will only be profiles with 1 wall and 2% infil thats printed in 5 minutes but falls together if you look at it long enough.&nbsp;Double action OTF fidget toy for the fidget toy design competition.&nbsp;All you need is plastic and a rubber band!&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/234870/2023-11-13_2404c2f7a37e2.gif">&nbsp;If you like the idea but dislike the design bookmark the model and visit it after the competition is over and I will release all the source file so you can easily modify the body or blade/comb!&nbsp;<h2>Assembly instructions:</h2>NOTE: For the double action to work you need to have a balance between your rubber band and the springs holding the blade. You can use the strongest rubber band you can find and it wont really matter, but the switch will be harder to push. So you might want to try around with different rubber bands or different materials for the springs. If the switch is to hard for your liking, your rubber band is to strong. If the blade/comb does not fully extract or retract, your rubber band is to weak or your springs are to stiff.&nbsp;<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=rN4wuBX-5q8"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/rN4wuBX-5q8" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;&nbsp;<h2>How it works:</h2><img src="https://makerworld.bblmw.com/makerworld/draft/234870/2023-11-18_6157ed5d0cf8b.png">

Double Action OTF Knife/Comb

Groom

tropicgtiturbo

lightbox i made of the powell skeleton logo.

powell peralta skeleton logo lightbox

SKATE

dethdeks

designed this euro style bench/ledge for tech deck fingerboards. printed it with the top facing down using supports for the bench

Tech Deck Ledge

Fingerboard

Somusgrove

Perfect Planter with dangling legs! Great addition to any room and can be scaled as needed. Must use supports for the legs and they are press fit in the end! Hope yall enjoy!

Planter Pot with Hanging Legs Shelf Pot

Plants

Slowpoke's Workshop

For mom

Gifts

Peter H.

Install the Emergency Toilet Paper in your bathroom and use it in case of roll shortage :)&nbsp;Easy printing without the need for supports.

In Case Of Emergency - Toilet Paper Edition

Bathroom

filete3d

Silent Ping Pong Paddle, Customizable pattern! No glue required, just snap on the handle!&nbsp;This model was created from experimenting with other 3D printed paddle models, which turned out to be very noisy. Inspired by the airless style, we designed a paddle capable of being customized to the user's preference, choosing the type and percentage of infill.&nbsp;New raquet grif pattern profile uploaded!, reduced printing time at half!&nbsp;How does it work? In Bambu Studio (or any other laminator) remove all the top and bottom layers and play with the infill parameters, at least 15% infill is recommended to achieve an efficient hitting surface.&nbsp;Print the handle with normal printing profile and just snap on the two pieces!&nbsp;Airless Ping Pong Ball tested model: <a target="_blank" href="https://makerworld.com/en/models/386079#profileId-286461" rel="nofollow noopener">https://makerworld.com/en/models/386079#profileId-286461</a>

Silent Ping Pong Paddle Airless Style Customizable

TheKirklands

March 12th update: After seeing my pictures of the original when placed inside the fan, it looked like the sides were maybe a bit short so I made a longer version. It is in the raw model files and there is a second print profile to choose if you want to try the longer one to ensure more coverage. I&#39;ve also added photos of my attempt at science (let&#39;s be real, it&#39;s more low brow “stience”) to show the changes in air flow when using it.&nbsp;And of course, thanks to everyone that has downloaded/made it! I really hope it has been helpful and would love to hear if it worked for you.--------------------Ahem…Cue the Infomercial voice…&nbsp;Are you tired of having all your flat prints lift in a corner(s)?Have you been intentionally arranging things on the plate to keep them away from the back left side?Have you been reading all the advice to “just turn off the AUX fan setting altogether for PLA” but that makes you worry that next time you go and print something with actual overhangs you will forget about it and then screw it up?Did you think turning the AUX fan down or off midprint would help, only to find it going full blast again after switching to the next filament for multicolour prints?Is the AMS unit sitting on top of your printer preventing you from “going topless” and opening only the door sucks too?&nbsp;If you have finally had enough of the AUX fan acting like an invisible, unkillable Terminator whose only purpose is to crush your dreams… then i have an invention for you!Seriously though, this thing works. I have remixed the very neat <a target="_blank" href="https://makerworld.com/models/185553" rel="nofollow noopener">Auxillary Fan Diffuser</a> by HDZ3DWORK. The diffuser is a wonderful design and it is great to keep in for everyday printing but I found it did not solve the lifting when printing flat coasters/signs the way I was hoping. I tried printing a full solid version of the original diffuser but it fits quite tightly in there and I found myself terrified that not allowing any air was gonna burnout a fan motor or something so I figured I&#39;d just modify it.&nbsp;FYI: Adding a brim does work too but removing them was not always flawless and can still cause damage to the bottom- which matters on facedown, flat prints especially. We have been and will continue to up the plate temperature (usually just to 60 for PLA on a P1S) as that seems to improve first layer adhesion regardless, but lifting had just become an inevitable reality. So.. like Frank Costanza creating Festivus, I just knew “there has to be a better way!?”. The changes I made are listed below. I alternate between the original diffuser and this one depending what is printing instead of doing an all out ban on the AUX fan in the PLA filament settings.<ol><li>Made a wider, solid front to block air going directly towards the plate.</li><li>Added length to the “arms” that go inside so there is a gap between the back of the blocker and the fan. </li><li>Cut out a large portion of the “arms” in the middle and opened up both ends to allow for free flow. With the added length of the arms you can pull out, push in or tilt it to slightly adjust the air. The majority of the air goes out the middle and travels up or down.</li></ol>Please try it if you are having the same issues and let me know if it helps!

The Warp Stop

P1S Accessories 

entroisdimensions_figurine

Pikachu is now available, and you have the choice between different file formats:<ul><li>STL</li><li>3mf for Multicolor Bambu Lab printer</li><li>3mf for Multicolor Prusa printer</li></ul>Video of printing the model: <a target="_blank" href="https://www.instagram.com/polymaker_figurines/" rel="nofollow noopener">Instagram</a>, <a target="_blank" href="https://www.tiktok.com/@polymaker_figurines" rel="nofollow noopener">TikTok</a>, <a target="_blank" href="https://www.youtube.com/channel/UCScmlttdRwRbBA61ZGlUVJg" rel="nofollow noopener">YouTube</a> For printing, I used PolyTerra PLA filament from Polymaker: 5 colors version:<ul><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574352298041" rel="nofollow noopener">PolyTerra PLA Savannah Yellow</a></li><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574352101433" rel="nofollow noopener">PolyTerra PLA Lava Red</a></li><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574351282233" rel="nofollow noopener">PolyTerra PLA Charcoal Black</a></li><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574352232505" rel="nofollow noopener">PolyTerra PLA Cotton White</a></li><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574351642681" rel="nofollow noopener">PolyTerra PLA Wood Brown</a></li></ul>To discover which new models will be released next, follow @polymaker_figurines: <a target="_blank" href="https://www.instagram.com/polymaker_figurines/" rel="nofollow noopener">Instagram</a>, <a target="_blank" href="https://www.tiktok.com/@polymaker_figurines" rel="nofollow noopener">TikTok</a>, <a target="_blank" href="https://www.youtube.com/channel/UCScmlttdRwRbBA61ZGlUVJg" rel="nofollow noopener">YouTube</a> Join the Figurines Community on <a target="_blank" href="https://discord.com/invite/r2ujMfEb7S" rel="nofollow noopener">Discord</a> Happy Printing!-----------------------------------------------Printer settings on the Bambu Lab X1C<ul><li>Rafts: No</li><li>Supports: Yes</li><li>Resolution: 0.2mm</li><li>Infill: 10%</li><li>Filament brand: Polymaker</li><li>Filament color: brown, white, black, yellow, red</li><li>Filament material: <a target="_blank" href="https://us.polymaker.com/products/polyterra-pla" rel="nofollow noopener">PolyTerra PLA</a></li></ul>

Pikachu Multicolor

Figurines

OJum

Easy assembly with my youtube video: The deagle in several parts was made to add an elastic for have the functional slide head.And on it you can add optic if you want but you don&#39;t have to glue the front sight.Except for this one you have to glue all the little parts.<figure class="media"><oembed url="https://www.youtube.com/watch?v=fid__ly3hdw&amp;t=21s"></oembed></figure>&nbsp;&nbsp;

desert eagle

GunModels

asymmetriccube

The best TS100 soldering iron holder. It sits securely but can be removed instantly. I've been using one for years. Add some blu-tack or similar to the bottom to hold it on your desk.

TS100 Stand with brass wool pod

Tools

joshherrera.cs

Inspired by the cineback model for the fx3/fx30 I decided to create my own for my rig that allowed me access to the hot shoe. This model also allows for the camera to be on a smallrig quick release plate so I can go light weight when I dont need the vmount battery. &nbsp;The parts used in the rig down bellow:v-mount battery adapter plate:<a target="_blank" href="https://a.co/d/45N3pju" rel="nofollow noopener">https://a.co/d/45N3pju</a>Bottom cheeseplate: <a target="_blank" href="https://a.co/d/02aDbdx" rel="nofollow noopener">https://a.co/d/02aDbdx</a>Çamera quickrelease: <a target="_blank" href="https://www.bhphotovideo.com/c/product/1570303-REG/smallrig_2143b_quick_release_clamp.html" rel="nofollow noopener">https://www.bhphotovideo.com/c/product/1570303-REG/smallrig_2143b_quick_release_clamp.html</a>Foam for screen to rest on:https://a.co/d/7KmSe5c

Screen Protector for FX3/FX30 Rig Cineback idea

Makerspace.Online

Needed a small camera surveillance sign, made one quickly, might come in handy for your usecase!

Camera Surveillance Sign (2 color print)

Home Accessories 

Bas_FPV

These are end caps for XT-60 battery connectorsPrint with TPU

XT60 battery caps

Victor001

flipper zero case

Flipper

Muunk Studio

This is a Tesla Cybertruck Kit Card designed by Muunk StudioThe Kit Card took advantage of Tesla Cybertruck's paperfolded-like exterior design, and it is printed flat, folded to an angle, and assembled. It allows to have no layer line and smooth surface finish on most of the parts.   There are three 3mf. files uploaded:<ul><li>Single Color Kit Card - has all parts included and only prints in single filament  </li><li>[Part 1] 2 Color Filament - printed in two different color filament and does not have all parts included. Must Print [Part 2]</li><li>[Part 2] Platform Part - prints in single filament color and must have [Part 1] printed to complete the assemble.</li></ul> Pre-folding along the scored line of surface helps when assembling.Please be careful when assembling, as fitting channels are small and fragile. Every parts should snap fit, EXCEPT for the Window detail. Window is not a snap fit, you have to use glue for window.&nbsp;Please follow the instruction below, for any question shoot me a message or comment below.And as always thank you and enjoy.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/706284/2024-03-12_ba3f8a4c42c9b.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/706284/2024-03-12_2fd546df155e3.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/706284/2024-03-12_cac77df71344a.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/706284/2024-03-12_278a4f85300c2.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/706284/2024-03-12_f45d1e3220b5d.jpg"></figure>

Tesla Cybertruck Kit Card_Designed by Muunk Studio

Car Models

vandragon_de

This simple boat is quite uncomplicated to print and is fun with or without the motor.&nbsp;Due to the appropriate size and the relatively low weight, however, it accommodates the wind-up motor and this therefore has sufficient thrust.&nbsp;However, if the boat is too empty for you, you can simply print the <a target="_blank" href="https://makerworld.com/en/models/183765#profileId-202627" rel="nofollow noopener">EASY 13 Printable Jointed Figure</a>, as I did as an example, and add an absolutely ingenious moving passenger as an option. I have also created a very simple alternative rear bench where you can clamp this figure.&nbsp;I hope you have a lot of fun. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/547576/2024-02-17_1d1bdbee3b346.gif"></figure>

Simple Boat for Wind-up motor

Kits

h3li0

<h2>organiser with grid pattern and removable separator</h2>created in fusion 360&nbsp;photos show printed in black matte pla and brick red petg-cf<ul><li>0.20mm layer height</li><li>10% adaptive cubic infill</li></ul>dimensions &gt; x: 200mm · y: 100mm · z: 110mm&nbsp;including two print profiles:<ul><li>two plates, for different colours / materials like seen on the photos</li><li>single plate, for same colour / material</li></ul>&nbsp;note &gt; the separator is a tight fit, with small tolerance, if your printer / filament struggle with smaller tolerances, reduce the scale of the separator in bambu studio by 0.5~1%&nbsp;<h3>commercial licence membership available on my <a target="_blank" href="https://patreon.com/h3li0" rel="nofollow noopener">patreon</a></h3><a target="_blank" href="https://www.buymeacoffee.com/h3li0" rel="nofollow noopener">buy me a coffee</a>&nbsp;note: all photos uploaded are of the actual printed model, taken inside a lightbox or in home studio&nbsp;

organiser with grid

Organizers

ThatGuy123568

added a honeycomb design to an already great shoe organizer.

Shoe Organizer

Shoes

Eclipse 3D

Penis Keychain

HALLOW33N

Suspended/StringArt

BEVERAGEZ

CAMP/Hike

Containers

CAT

IKEA Skadis

Sm0k!ng

XMAS

LED

DAWG

E-BiKE

JEWELRY

Art!culated

KITCHEN

Planes

RECOVERY/Addiction

GAMING

TPU

CLOCKS

XMAS

CAR Accessories

GR!DF!N!TY

VAPE

MEDICAL

OFFICE/Biz

Musical

costume/cosplay

TECH

GUITAR

Groom

SKATE

Fingerboard

Plants

Gifts

Bathroom

Fun

P1S Accessories

Figurines

GunModels

Tools

FX3

Home Accessories

FPV

Flipper

Car Models

Kits

Organizers

Shoes

LOL

Camera Accessories

Art Decor