looks absolutely stunning even before assembly.. cant wait to finish it!

very nice ptint although I would recommend to shrink it by 1% to have it snug on the glass - rn its falling off very easily

looks absolutely lovely in SunIu teal blue. only very small overhang issue at the top, but still printed nicely

absolutely best bed tramming or bed cleaning model - covers the 100% of the readily available bed surface (just minus the arwa under filament cutter)

This is an absolutely gorgeous model and great print profile. Used Oreo SunIu marble PLA filament and it came out terrer than i expected. will need to iron out some minor post-support overhangs but overall - masterpiece. thanks, and grab a boost!

needed to print just the outer ones, and they came out beautifully. the support was quite snug to the stem though, needed some knife rework but the outcome was nice nevertheless.

edit: I do have to change my rating of the model, as after mounting it in the system i continously get the silicone pad ripped out of the holder. this typically results in no wiping, but ocassionally it lands in the printbed just after it tried to wipe, which results in printhead squeezing it during bed level calibration. I would love to see this model altered in a way it has some extra wall on the left which would make the rubber sit in some sort of a moat - the two T pieces of the silicone pads are just not enough to securely keep the pad in place. I'm happy to help with the design if you would like me te, as i do.really love the general concept. printed perfect in SunIu PETG. still waiting for the nozzle wipers, but this one is worth trying even only if for the fact I dont need to glue the silicone in. thanks for the model!

the print came out very nice with the use of BL ABS. at first glance I thought the holes will be too big and the pellet will fall out, but fortunately thats not the case. unfortunately, at hindsight there is something more frustrating when using this dryer - there is no way how to easily transfer the dried out dessicant without spilling it all over the place. either way, its a nice project which only needs an extra tool for helping to remove the dessicant back to drying pods.

printed both versions - xl for sun lu spools and regular. both came beautifully with matte black petg.

printed out perfectly with petg. does not fit in Sun v2 spools (only the size thats the same as original BL). either way I do recommend as the effect is brilliant.

printed out beautifully. to tlrelease the chuck i needed to bend the three grips left and right, and that made it all spin right away. very nice profile, thanks!

looks at this beauty, erfect result with Sunlu matte pla!

I would definitely recommend to use the base which has slicer defined supports, as there's way less overhang stringing.

looks gorgeous in sunlu marble PLA! have to say though, gets to the very limits of the printbed ;)

another successful print, this time with the earth profile. I dont think I like it as much as the other planets (some details are just spiky nubs) but it still managed to finish it without failure. printed this one in sunlu matt pla.

absolutely stunning in BL orange PETG. more stringing tjan on a PLA but nothing that a torch wouldnt fix. printed with 8 wall layers and 10 top layers, arachne.

Tried to print one with the BL PETG and the result is still really nice. Arachne, 10top layers, 8 walls. very little stringing in the end.

Another beautiful print from this set. this Neptune printed in BL basic PLA - a bit shiny, and maybe I would recommend to slow it down for the last 2cm up top, but still the details are marvelous!

printed the Pluto with Sunlu Marble Oreo PLA with 8 layers and Arachne wall generator and it came out absolutely gorgeous. even the weak Ali light shines through it beautifully. great projects and print profiles, tha ks a lot- will definitely print more of those :)

Absolutely gorgeous when printed with Sunlu Silk PLA! the supports came off great, almost without any visible marks. Great profile and design, thanks a lot!