MarioD

Guarse

After Gandalf, his eternal rival could not be missed! Here is Saruman the White in brick style! Place him next to Gandalf and be transported to Middle-earth every time you enter your home. Who will win the magic duel on your shelf?

Mega Saruman in Bricks Style NO AMS

Figuren

Qmax3D

Hi there!New lamp kit is here!For better result, please download and print file .3mfDon&#39;t export as .stl file, the model will be corrupt.The model not suitable for bambu A1 mini. :(If you want license, feel free to contact me.Have nice day!

Three body problem Lamp for bambu Led Lamp 001

Lampen

DonBossco

In case of different material and shore grade of TPU, please be safe and use your own cutomized TPU settings.&nbsp;Anti vibration feets for the A1 mini. Is made from TPU.In the profiles there a set of 4 feets.&nbsp;Infill 10 % GyroidTPU 95 A

A1 mini anti vibration feet

A1 Mini

miziomon

When a new piece of furniture arrives at home and you finish assembling it, there&#39;s always someone who says, &#34;It would have been nice if there was an extra shelf.&#34; Then you remember you have a 3D printer. After taking a couple of measurements, you try to create something practical and quick to print.A few hours of design work and half a day of extruding some PLA later, here’s the result. This is the second version of my &#34;shoe shelf&#34; (a bit sturdier than the first but still very lightweight).  Since these are custom-made for this piece of furniture, they might not fit yours. But among the files, there&#39;s an OpenSCAD file you can use to customize the dimensions to suit your needs. I&#39;ve got files available for two different sizes (250x210) and (250x225), each with a version at 120mm and 150mm height. If you like this model and want to support my work, you can give me a &#34;boost&#34; 🚀 or buy me a [<a target="_blank" href="https://ko-fi.com/miziomon" rel="nofollow noopener">Ko-Fi</a>].  Your contribution, no matter how small, helps me buy new spools of filament for creating my prototypes. ;) Thanks in advance!  :)&nbsp;

Parametric Shoes Shelf 

Open Scad

Daneti

This Planter is designed to allow you to drop a normal 4 and a half inch pot (the type of pots plants come in when you buy them) and just drop it straight in easily creating modern style in your home.&nbsp;This planter has been designed not to have a hole in the bottom because it is designed to have a pot just dropped into it. Commercial license is fine as long as you are not in direct competition with the designed I.E Me.

Modern Flutted Planter V2

Blumen

hanysX

You all know and love the Star Wars Universe! Immerse yourself with this one-of-a-kind astromech seen regularly throughout Star Wars Skywalker Saga! Simple print, you can scale down to 25% for a desk topper or keep it at the provided scaling for an awesome room decoration! Supports are suggested!

Star Wars R2-D2

Star Wars

TechieNI

Kindle Fire Tablet 10 Inch, Headrest, Car, Vehicle Mount, Designed for Vauxhall/Opel, Zafira B, Astra GIt may fit other vehicles with similar spacing of headrest posts.Printed in ABS to allow for a little shrinkage. I wouldn't recommend you print it in PLA with the heat of the summer inside the vehicle or you could find A puddle of filament on the ground lol. PETG will work but may be a little looser fitting compared to ABS but still works and fits perfect for me.

Kindle Fire Tablet 10 Inch Headrest, Car, Vehicle Mount, Vauxhall, Opel, Zafira B, Astra G

Belli/Helli

Collecticraft

<h2>Knitted Easter Egg Boxes: Charm for Festive Delights</h2>Description: Get ready to celebrate Easter in style with our Knitted Easter Egg Box Collection! This delightful assortment features four unique boxes, each adorned with charming knitted patterns that exude rustic charm and warmth, perfect for adding a touch of festivity to your Easter celebrations.<h3>Key Features:</h3>Festive Knitted Designs: Each egg-shaped box boasts a different knitted pattern, from playful stripes to intricate lace, capturing the spirit of Easter with its vibrant and festive designs.&nbsp;Ideal for Easter Treats: These knitted egg boxes are the perfect size for holding Easter treats such as chocolates, candies, or small gifts. Surprise your loved ones with these adorable and functional containers!&nbsp;Thoughtful Easter Gifts: Spread joy and cheer this Easter season by gifting these knitted egg boxes to friends, family, or colleagues. They make thoughtful and unique presents that are sure to delight recipients of all ages.&nbsp;Celebrate the Easter season in style with our Knitted Easter Egg Box Collection, and make your festivities even more memorable with these charming and practical additions. Plus, with your <a target="_blank" href="https://www.patreon.com/CollectiCraft" rel="nofollow noopener">Patreon</a> subscription, you'll receive a commercial license, allowing you to use and sell these delightful creations as you please.&nbsp;Check the<a target="_blank" href="https://makerworld.com/en/models/222268#profileId-240459" rel="nofollow noopener"> first design</a> and experience the complete collection!<figure class="image"><a href="https://makerworld.com/en/models/222268#profileId-240459" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/684974/2024-03-11_6ccf0f0a13197.gif"></a></figure>

Knitted Easter Egg Boxes

Ostern

OCDTOOLFREAK

Shout out to xSt0n3x for the help printing and testing files.This is just like the other <a target="_blank" href="https://makerworld.com/en/models/201305#profileId-221686" rel="nofollow noopener">packout ready</a> battery caddies I've designed but for the Makita 18V.Your batteries lock in to the carrier and then it locks in to your Milwaukee packout system and stays until you press the latch and pull. It keeps you ready to go with up to 6 batteries per battery packout caddy and you print 2 of them you can lock them both in to the top of any standard size Milwaukee packout lid to have 12 batteries on the go.It does require A few screws but that is so it is printed in the best orientation and very few supports.You will need :4 - #2 screws .5" long8 - #10 Screws 1" longAdded extra walls so the screws will have more to bite in to.&nbsp;Thanks for the support and appreciation for my work…..as you all know printing can be expensive and creating takes time if you'd like to support me even further then buy me a coffee here….. https://www.buymeacoffee.com/ocdtoolfreak

Makita 6x Battery Storage and Carrier- Milwaukee Packout Ready

Werkstatt etc.

Magic Studio 3D

"Minion 3D Model" 🍌😄 Bring the zany world of Despicable Me to life with this adorable Minion 3D model! Inspired by the lovable yellow characters, this intricately designed piece will infuse your space with the whimsy and laughter that only Minions can bring.&nbsp;This model does not yet contain the step file, so to import it into Bamboo Studio, you just have to select all the STLs and drag it to Bambu Studio!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/125638/2023-10-27_6aa316784592c.png"></figure>&nbsp;Bambu Studio Settings: The settings are just a recommendation, however you can print with the settings you are already used to using! • Preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04 • Quality → Wall generator → Arachne • Quality → Wall transitioning threshold angle → 50º • Strength → Advanced → Infill/wall overlap → 20% • Quality → Advanced → Avoid crossing walls • Increasing retraction / reducing temperature can help reducing wisps • I recommend always starting with the lighter colors. Recommendations before and after printing:&nbsp; • Use textured PEI sheet • To make the hole for the USB cable input for the LEDs, you can do it with a soldering iron, drill a hole or you can do it with a slicer by adding a negative model in the place where you want to make the hole • For the pieces to give more light, I recommend using aluminum tape on the inside of the back cover • Be careful to clean the table well&nbsp;Materials and tools used to assemble parts:&nbsp; • Aluminum Tape for the back cover • Hot glue pistol to place in the spacing of the LEDs so they don't come off • Soldering iron to make the hole for the USB cable and/or to solder the LEDs with the USB cable with ON/OFF switch • White or RGB LEDs&nbsp;To find out the list of all the components I use, you can click on the link in my description, and you will find it in the first post!

Minion Lightbox LED Lamp

Lampen 

9arr3tt

Print Profile for P1P 5x5 is the largest size that fits on Bambu build plates

5x5 Gridfinity Box By Pred

Gridfinity

LLDJ3D

Quality Setting :&nbsp;Layer Height : 0.08Base Layer : 0.16100% infill&nbsp;Instruction :&nbsp;Start with Black At layer #7 (0.64mm) swap to Red At layer #12 (1.04mm) swap to Yellow At layer #18 (1.52mm) swap to White for the end.&nbsp;Please share your's print result.

Mario Kart Hueforge (4 Colors) 

Hue Forge

Never Disarm

Revolutionize your nail care routine with our Nail Kit Organizer – now with dedicated space for up to 21 of your favorite nail polishes! Unleash the power of perfect organization as you keep your nail essentials and a stunning polish collection in one stylish hub. &nbsp;This sleek design ensures your nail clippers, files, and brushes have their designated spots, while the spacious polish compartment lets you showcase and easily access up to 21 of your go-to shades. Elevate your beauty station with this Nail Kit Organizer – where style meets functionality in perfect harmony!&nbsp;Print hassle-free with our Nail Kit Organizer 3D file! No supports needed, and it's a breeze to print in PLA.&nbsp;The Nail Kit Organizer 3D file requires no additional hardware – just two M3 x 8 mm screws are all you need to secure the drawer handles. Keep it easy, keep it efficient. Print, assemble with minimal effort, and enjoy a clutter-free nail care routine. Elevate your organization game effortlessly with a touch of style, because sometimes, less hardware means more convenience!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/317254/2023-12-27_386c01fbc2be2.jpeg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/317254/2023-12-27_557e557797bb5.jpeg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/317254/2023-12-27_6a94ee0f0d183.jpeg"></figure>&nbsp;

Nail Art Kit Organizer

Jenny

Habitaritus

We have already printed various stands for earrings and rings. Unfortunately, my wife didn't like them. For this reason, we created this beautiful rotatable and expandable stand together. All modules can be rotated. The individual levels are connected with connectors. There is a long and a short version. As you can see, you have a lot of space.&nbsp;-----&nbsp;Wir haben bereits diverse Ständer für Ohrringe und Ringe gedruckt. Leider haben meiner Frau diese nicht zugesagt. Aus diesem Grund haben wir gemeinsam diesen schönen drehbaren und erweiterungsfähigen Ständer erstellt. Alle Module sind drehbar. Die einzelnen Ebenen werden mit Konnektoren verbunden. Es gibt eine lange und eine kurze Version. Wie ihr sehen könnt, habt ihr sehr viel Platz.&nbsp;UPDATE 3 25.02.2024<ul><li>Added a rondel for hairclips</li></ul>UPDATE 2 11.02.2024<ul><li>Edit for the End Stop Hole size for A1 Mini Build Plate (Made it a bit smaller to get a better fit on top)</li></ul>UPDATE 11.02.2024<ul><li>added a very long connector (4cm longer)</li><li>changed a filename of the old connector from “Earring Holder_connector.step” to “Earring Holder_conmnector long”</li><li>changed the .3mf files and added the very long connector to the plate</li></ul>

Rotating stand for earrings, rings and small necklaces, expandable

Schmuck etc.

laisch

With this handy little tool you can clean your carbon rods even when the lid of your bambulab printer is closed.Just put Isopropyl alcohol on the sponges, snap it to your carbon rod and move it back and forth a few times till they are shiny again.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/251911/2023-12-07_e4ey6ohuzxon.gif"></figure>&nbsp;<h3>Postprocessing</h3>For the sponges you can use a normal kitchen sponge (be careful to not use the abrasive ones). Cut two pieces roughly about 10x20x20mm and press them into the spongeholder.For the pullback mechanism you can either print the provided spring in TPU, or use small hair rubberbands. The spring also works in PETG but looses its strength from time to time.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/251911/2023-12-07_g1k0c2tnzlwn.jpg"></figure>&nbsp;&nbsp;More info about cleaning the carbon rods can be found in the <a target="_blank" href="https://wiki.bambulab.com/en/general/carbon-rods-clearance" rel="nofollow noopener">Bambulab Wiki</a>

Carbon Shine - Carbon Rod Cleaning Tool

Tools

Ludo Timp

Z-axis cap for P1P, X1 and X1C  |  Loose fit!&nbsp;For all the people who want to give feedback on the fact that this cap is too loose of a fit:The reason of the loose fit that rotates easily is that not in any case you want a z-axis dust cover to grip, snap or sit to tight at the top op the z-axis screw rod. Just the slightest resistance of a cap against the z-axis screw rod can result in layer defects. So I advice you to go for the safe option, in stead of the tight option. And if you don't want any risk whatsoever, don't use a cap at all. Not even mine that has a loose fit.I use them now for over a year and never had any z-axis defects, pop off's or other issues.&nbsp;Features:<ul><li>Shields the metal z-axis end-bearing from dust and filament debris.</li><li>Material: Bambu Lab Black ABS.</li><li>Chamfered bottom and top.</li><li>Diameter: 19mm.</li><li>Height: 2mm.</li><li>Includes 1,5mm inside indent for z-axis metal protrusion.</li><li>To be placed on top of the z-axis.</li><li>Sightly smaller then the z-axis hole so the cap can rotate freely if needed.</li><li>Printed on Bambu Lab PEI textured plate to match the plastic z-axis mount matte finish a bit.</li><li>Easy removal: just press your finger a few seconds on the cap and lift it off.</li></ul>Disclaimer: This design is free to download including the accompanied files. By downloading this design, you agree to the following:<ul><li>as with all designs that you didn’t make and test yourself, mine may work or won’t for you,</li><li>I can’t give any guarantees for the print you make, the way you do it and which tools u use,</li><li>no rights can be derived and I can’t be held liable.</li></ul>If you have questions or suggestions, please contact me by message. In case you need an adjustment or re-design, I’ll perform those upon payment.  If you like what I made and want to tip me for it, please do so at your discretion at <a target="_blank" href="https://ko-fi.com/ludotimp" rel="nofollow noopener">Ko-Fi</a>. Have fun and enjoy being creative!

Z-axis cap P1P, X1, X1C  |  Loose fit!

Bambu P1P

3Dimension Customs

MERRY CHRISTMAS! Here's a cute Merry Christmas sign to make your holiday decor special!

Merry Christmas Sign

XMAS

PiNK_3DP

The M and L were test printed at 100% scale, but I imagine they could be scaled down as well. I have added a (S)mall size that can fit on a Prusa mini print bed. There is a version of each size with an integrated phone stand. S- 170x170mm M- 200x200mm L- 200x260mm

Hex catch-all trays

Organizer

Thyristor

Since the cardboard spools from Jayo are unfortunately not meant to go into the AMS, and so far, no ring adapter or other spool model has fit well or operated smoothly, so I created this one as part of the <a target="_blank" href="https://makerworld.com/en/models/search?keyword=cbas" rel="nofollow noopener">CBAS</a> series.&nbsp;The spool needs around 152 grams of filament with 15% infill, making it not lightweight but rather sturdy and smooth-running. So far it has always fit perfectly into the spools core. The Silica Compartment Lids add approximately another ~15 grams.&nbsp;The adapter spool also fits the 650g JAYO spools (at least on the ones I could test). If it's different for you, let me know in the comments.&nbsp;<h3>Updates</h3>23/01/02 Silica compartment lid updateAdded the Silica Compartment Lid (SCL) - with this cover, the spools core can be sealed, allowing it to be filled with silica bags or loose beads. Loose beads should be bigger than 1.5mm, as smaller beads may pass through the air slots. For easier tightening and loosening of the SCL, you can find the TwistAssist listed under accessories below. The SCL is only compatible with prints printed from files tagged with the SCL label.Changed the default print profile to the SCL version. The SCL variant remains compatible with older versions. It gains approximately ~2 grams in weight.&nbsp;23/12/25 Label space module updateThe standard print profile has been changed to the label space module version. As a result, the spool becomes approximately 10 grams heavier but remains fully compatible with the original version.Profiles for the label space modules have been added, labeled with the most common filaments as well as an unlabeled variant - unlabeled also available as .step file.The 'JAYO 1.1' profile has been removed.&nbsp;<h3>Assembly</h3>To assemble, first remove a cardboard side of the JAYO spool and replace it with a printed half, some of the glue residue may need to be removed. Hold the spool and turn it over, then remove the other side, now screw the halves together until they are tight.The LSM can be inserted into both parts of the spool, preferably when the spool is not yet loaded, and it may require some effort depending on your printer.The SCL can be easily screwed into the thread of one of the spool cores.&nbsp;It's best to wrap the filament with painter's tape beforehand to prevent it from unwinding on its own.&nbsp;<h3>Accessories</h3>This spool is part of the CBAS series and can make use of these accessories.&nbsp;TwistAssist for spools of the CBAS series equipped with the Silica Compartment Lid (SCL):<a target="_blank" href="https://makerworld.com/en/models/119878#profileId-128974" rel="nofollow noopener">TwistAssist for SCL</a>&nbsp;For those who prefer not to use the holes in the spool to secure the filament, here is the appropriate filament clip:<a target="_blank" href="https://makerworld.com/en/models/63688#profileId-66694" rel="nofollow noopener">FilaClip for CBAS</a>

JAYO (1.1kg AND 650g) cardboard adapter spool 

Spool Adapter

Willi 3D

Create your BaBo organizer! A system created to store them all!&nbsp;Description:This is the BaBo insert scraper. This allows the scraper to be held firmly and available at all times.&nbsp;<figure class="image image_resized" style="width:37.48%;"><img src="https://makerworld.bblmw.com/makerworld/draft/731561/2023-11-03_ed680271101a7.jpg"></figure>&nbsp;BaBo organizer is a stationary, very flexible system to store your tools, spare parts and even printing plates. The design is based on the iconic look of the Bambu Lab X1 printer. The entire system uses only 1 type of screw, M3x8 countersunk screws.&nbsp;Links:<ul><li><a target="_blank" href="https://makerworld.com/de/u/24485025/collections/12914" rel="nofollow noopener">BaBo collection</a></li><li><a target="_blank" href="https://makerworld.com/en/u/24485025/collections/666853" rel="nofollow noopener">BaBo duo collection</a></li><li><a target="_blank" href="https://makerworld.com/en/u/24485025/collections/666866" rel="nofollow noopener">BaBo inserts</a></li><li><a target="_blank" href="https://www.printables.com/@Willi/store" rel="nofollow noopener">Exclusive models, printables. (Credit card)</a></li><li><a target="_blank" href="https://than.gs/u/1578655?plans=true" rel="nofollow noopener">Exclusive models, thangs. (Paypal, Credit card)</a></li></ul>Updates:(03.11.23)<ul><li>added space for blades</li></ul>Printing:Layer height: 0.2Supports: NoBrim: NoMaterial: all&nbsp;If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. <a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=WGL5LXN5EHEXN" rel="nofollow noopener">If you want to support my work buy me a coffee (PayPal).</a> Thanks!

[BaBo] insert scraper 2x6

Bambu Organizer

RoB.G

<img src="https://makerworld.bblmw.com/makerworld/draft/263741/2023-11-15_d831eae598fe5.gif">&nbsp;&nbsp;<blockquote>ADJUSTMENT SCREW for cabinet ventilation </blockquote>&nbsp;

Bambulab ADJUSTMENT SCREW for cabinet ventilation

AMS / Riser

橙豆造物

因为上传过不了，所有文件放在原文件处。可能太大了过不自检组装仅需要胶水总共67CM高【3D打印巨型水箭龟】 <a target="_blank" href="https://www.bilibili.com/video/BV1Ak4y1g7B6/?share_source=copy_web&vd_source=0f1a29922eeddb1675f64c100fd3991d" rel="nofollow noopener">https://www.bilibili.com/video/BV1Ak4y1g7B6/?share_source=copy_web&vd_source=0f1a29922eeddb1675f64c100fd3991d</a>&nbsp;40CM 1：1 Pikachu<a target="_blank" href="https://makerworld.com/zh/models/29361#profileId-25788" rel="nofollow noopener">Pokemon Pikachu print-in-place foldable 1:1 40cm 二次创作 - 来自 橙豆造物 - MakerWorld</a>

水箭龟超大版~Blastoise 67CM！！！

Pokemon

Infinity 3D Prints

the best Halloween sign out there :3

happy halloween -trick or treat signage / 6 slot and 4 slot ams profiles 

Halloween

Yokoprints3D

*UPDATE* Version 2 updated with 2 colour layer height to 0.6. Basic settings.OPTION - FACEDOWN Files are already set to 2mm for the multicolour first layer & followed black layer for 3mmOPTION - NORMAL PRINT First colour change at layer hight 3mm Keychain are avarangly 45mm width or Height

*UPDATE* KEYCHAIN CHRISTMAS SET OF 12 _ version 2 updated

Christmas

Olivier3dPrint

A deatshstar lamp from the starwars saga&nbsp;Stand can be found here : <a target="_blank" href="https://www.printables.com/fr/model/23859-designer-lithophane-moon-lamp/files" rel="nofollow noopener">https://www.printables.com/fr/model/23859-designer-lithophane-moon-lamp/files</a> &nbsp;You can buy me a Tea (i do not like coffee ;) ) here <a target="_blank" href="https://ko-fi.com/olivier3dprint" rel="nofollow noopener">https://ko-fi.com/olivier3dprint</a>&nbsp;If you want using the BambuLab Led Kit 001, <a target="_blank" href="https://makerworld.com/en/models/431731#profileId-336300" rel="nofollow noopener">i made on for this</a>