Malork

fay3dlab

This is a new ship for my suspended Star Trek Collection.. The USS Voyager from the television series Star Trek Voyager.The whole suspended ship was modelled using tinkercad.. the frame is seperated into 2 parts where you can print the the LED frame holder and add LED strip.. The installation of LED strip will need some soldering since the strip needs to turn sharp corners.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/610558/2024-03-01_527c04527ead9.jpg"></figure>When installing the LED strip.. there will be a small hole on the back of the LED holder.. that you will run the whole LED strip through.. the hole is the size of the LED strip..Run the LED strips though the channel and when you want to transition the LED strip 90degress.. you'll have to cut and add wires to it.. i tried bending the strips and the connection kinda disconnected.. and the rest of the LED strip didnt light up.. so i had to cut and add wires to all the 90degress bend.. i added silicone glue to keep it in place..The back end of the voyager is also printed separately with the peg that holds them together..<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/610558/2024-03-01_f388c40f1b2d7.jpg"></figure>I added multicolor print profile so feel free to change the colors as you see fit.. Have fun 3d printing.. &nbsp;<figure class="table" style="width:960px;"><table class="ck-table-resized" style="border:1px double rgb(179, 179, 179);"><colgroup><col></colgroup><tbody><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">If you would like to support me, you can join me on my <a target="_blank" href="https://www.buymeacoffee.com/fay3dlab" rel="nofollow noopener">buymeacoffee</a> page..</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">By joining me as a supporter.. you'll be able to get behind the scenes informationon my current projects as well as future projects..</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">And if you're looking to sell my prints.. you can join my merchant membership tier as lowas USD10 a month..</td></tr></tbody></table></figure>&nbsp;

Suspended USS Voyager

Suspended stuff

squinn

This enchanting dice tower with a castle motif includes a beautiful wrap-around spiral stair case, allowing the dice to bump and roll with randomness as they descend. The tower&#39;s top provides a funnel shape that allows for the dice to be easily dropped in.&nbsp;This is an easy print, and has been carefully designed so that no supports are required. The tower is just under 18 cm tall, allowing it to be printed on smaller volume printers as well.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000509299/design/2024-06-24_k5nb1ar2wyd1.gif"></figure>

Dice Tower Castle Stairs

Dice towers

Zer0 Effort Workshop

3D print your own Classic Space Astronaut figure made from 500% scale replica of popular toy bricks.<h3>Printing Guide</h3>An AMS is required to print this figure. It is recommended to use the print profile I have provided to print this model. I can&#39;t guarantee that you will achieve the same success I have, but after several test prints and trial and error, I know this to work. I also recommend printing on a <a target="_blank" href="https://www.amazon.com/gp/product/B0BY8RZBZ6" rel="nofollow noopener">smooth surface PEI plate</a> so your pieces are not textured.<h4>Filament</h4>The print profile is separated by plate for efficiency with printing time and material. You can use whatever filament you have on hand, but I used:<ul><li>eSun PLA+ Blue</li><li>eSun PLA+ White</li><li>ZIRO PLA Red</li><li>Sunlu PLA Pure Yellow</li><li>Sunlu PLA Black</li><li>OPTIONAL - The planet in the logo on the torso looks good in a Metallic Gold. I used Bambu Labs PLA Basic</li></ul><h4>Print Settings</h4>The print profile is set up to print two wall loops and 10% infill on Gyroid, however you can tweak to your liking.<h4>Supports</h4>Again, I recommend the settings I have in the Print Profile. You may need to enable supports by object. I have added manual supports to the overhangs that are critical. Some may need needle nose pliers to be removed.<h3>Assembly Guide</h3><ul><li>The head piece may need some sanding or filing on the inside to fit on the neck of the torso.</li><li>The hands fit into the arms and stay with friction.</li><li>The arms effortlessly fit into the torso and also stay with friction.</li><li>The legs may need some force to fit onto the hip piece.</li><li>The hips have a tight fit into the torso, but I assure you they will fit and stay together.</li></ul>Happy Printing and Enjoy!&nbsp;UPDATE 3/30/2024: Added a handheld radio to the print profile!<figure class="image image_resized" style="width:26.48%;"><img src="https://lh3.googleusercontent.com/pw/AP1GczNs9_-q1NfBSNeJfv-QF3cAHhCMrAhK-eX5tJ5pRfkq1VQDkuubh68xTmZZner7TayRzzbRmSRUZcD4DzJT6jcCNX8eAZ9rqq3VbgVJWucNf25IDWEMraG_UkwcGUFOwQkZ5ClB-o3mF-kndzchZmzKPnWijEHwQz7m9g5abWWTDKWyFLackL4tg9jsgT1WyI26GyuxacKmEBextif3NE-MhzM5ksj5uHhWD9K_zGayEjPoKRkGSyH3QmwvtNUfkSNi43FEFzOQI9KamMeI8s7PrHQLSLqEaEx-aLayyWhebcer4QRc1HypfNVT7fB4D95S33gcJ9ONYgBGMqH3ThwbaV8dKa6IwiljLr1HczEiEptBdlZoKHshCs_0ADfLntqOvLtTn6P5UaZC7Ci2f6BeQtMaY18Eb7N0DOsXBbEXjrFkHX4ZkxokguU6zqE3C64EMxLCByrs37Le-yV-yjiPNcZ1I2kSpe6xBvqRxc1w8OMiBggKWdJdlfDMiMUs9aGyP1IH8_2dQIlTWvnTUbCY6KIAMNOSqq1SqBowXG5jgdb4Bqcl4zMv_f6wspUrC-6m_7gTmeG2R1DB427w7pdEXl_3zTPGW2DRjKJT7xOCh0qglE95-8zARlKTtgyWa-hQ9V3GmBTVsHheP3AvoEHnEKbvL9HUbfnBmXuWGFnGhu4oGs4yeGl32BjKoRSEUiGjiqabH62GgQ-wFAo6ZLHh98SRcC2qcZuPdL--ncQxYuJlF-Dv1BFdP1VvR--mFxxccRgkqaiivk5pZVoePvANufwSgIkjUtqduF696JKAZOyGtlI-z6CllE0MvnE1zVDvHzXhol6UjFwyrs-PzyxRG_TY9LQKn1bIfU5CsdYSQY4QW6uBD5bvajPF15AzPTOw8_S68a6tncuWGisxy7uzJ2d07yP_bJZDYt-gTPTgnovvPWD9esW7WKuKrrp11r-cqZ_0gXxf0XqPJY6aBfLJaFmLbq3CHA=w683-h911-s-no-gm?authuser=0"></figure>

Classic Space Astronaut 5:1 Scale Brick Figure

LEGO

asdfghjklö

Ironing test for ironing speeds from 15 to 40mm/s and flow from 10 to 50%&nbsp;This is a smaller version for smaller surfaces and/or a faster faster guess. If you are searching for a more accurate print for larger surfaces,<a target="_blank" href="https://makerworld.com/en/models/398777" rel="nofollow noopener"> my other model </a>is probably better for you.<h3>Instructions</h3><ul><li>on bambu mobile: select your printer, plate and filament(profile) and just hit print</li><li>on bambu studio: same as above, but if you need to switch your printer, make sure you enable “Advance” in the “Process” Menu before switching printer, or some ironing settings might get lost (depending on your bambu studio version). Thanks to <a href="/en/@GianfLab" rel="nofollow">@GianfLab</a> for letting me know!</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/779174/2024-03-21_12f81c5536987.png"></figure><h3>Notes:</h3><ul><li>Dial in your filament first (flow, pressure advance) or this print won't make a lot of sense</li><li>Results will be different for different filament types (materials) and often also different filaments, sometimes even for the same brand&product but different color (same as with most filament settings/calibrations)</li><li>For filaments that tend to blob (e.g. PETG) it might make sense to check for blobbing frequently and/or only print 1 stripe at a time. Having “half-liquid” filament around your nozzle while ironing will affect the ironing result.</li></ul>

Ironing calibration: speed&flow,15-40mm/s & 10-50%

Calibrations

HpInvent

The Phone Pillow: Crafted to resemble a cozy cushion, this unique accessory is actually made from durable plastic. Its plush design provides a comfortable resting place for your device, seamlessly blending functionality with style.&nbsp;It&#39;s comfortably sized for an Iphone 15pro Max or similar size. If you have a smaller phone you can downsize the model to reduce print time ;) Because of many requests I added a version with a cable slot for the charging cable to the print profiles.&nbsp;Due to many requests for commercial licenses for my 3D models I created a patreon page. You can become a member to get permission for commercial use or just want to support my work : <a target="_blank" href="https://www.patreon.com/user?u=79128277" rel="nofollow noopener">https://www.patreon.com/user?u=79128277</a>  There you can also find exclusive Models for Patreon Subscribers only ;) If you Just want to give a one time Support you can buy me a coffe here ;)  <a target="_blank" href="https://buymeacoffee.com/hpinvent" rel="nofollow noopener">https://buymeacoffee.com/hpinvent</a>&nbsp;Here is a small Sneak Peak of a coming Bathroom Set  More Information about the launch date and early acces can be found on my Patreon. <a target="_blank" href="https://www.patreon.com/user?u=79128277" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000465699/design/2024-06-14_835436fae26ee.png"></a><a target="_blank" href="https://www.patreon.com/user?u=79128277" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000465699/design/2024-05-28_f3fb110d8cdec.png"></a> <a target="_blank" href="https://www.patreon.com/user?u=79128277" rel="nofollow noopener"><img class="image_resized" style="width: 61.65%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000465699/design/2024-05-30_38b5963246ece.png"></a>Also check out my other Designs!I have a bunch more stuff in my profile!! <a target="_blank" href="https://makerworld.com/en/u/3624704578" rel="nofollow noopener">https://makerworld.com/en/u/3624704578</a><a target="_blank" href="https://makerworld.com/en/models/428498" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000465699/design/2024-04-18_7588ba5642a27.png"></a><a target="_blank" href="https://makerworld.com/en/models/426994" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000465699/design/2024-04-15_b0f8912a15393.png"></a><a target="_blank" href="https://makerworld.com/en/models/427979" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000465699/design/2024-04-15_b1e75bac7bd51.png"></a><a target="_blank" href="https://makerworld.com/en/models/416941" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000465699/design/2024-04-08_ebe2de8bae1b3.png"></a><a target="_blank" href="https://makerworld.com/en/models/232706" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000465699/design/2024-03-06_ea517b7dbe741.png"></a><a target="_blank" href="https://makerworld.com/en/models/394559" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000465699/design/2024-03-27_3b061a50c97b7.png"></a> <a target="_blank" href="https://makerworld.com/en/u/3624704578" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000465699/design/2024-03-08_a8a626fc04c78.png"></a>  &nbsp;&nbsp;&nbsp;Happy printing!&nbsp;

The Phone Pillow

phone

kulli

Gaming token inspired by Asian culture&nbsp;I&#39;ve created this model to test and challenge the limits of my new P1S. The prints seen in the picture, are printed at 60% scale with 0.2mm Nozzle at 0.06mm layer height with the Bambu Basic green PLA, but it may work on even smaller scale (although I didnt test it yet).&nbsp;I tried to model in a way to need as few supports as possible, I think it works pretty well. The model prints in under 2h and looks fantastic in different colors. It can be used as gaming token for different games like Catan, Andor or any other one. Printed in a bigger scale, it also can be used for DND and other games.&nbsp;Size (at 60%):29.5 x 23.6 x 279mm&nbsp;Assembly:The model is divided into three parts for a better printing result. After printing the profile, the supports should be carefully removed and the three parts glued together. The lantern should be oriented to the front.

Asian inspired gaming token

0.2mm nozzle

jponky

This is version 2 of the A1 Mini Accessories Toolbox Tray. It now holds space for 4 nozzles! I learnt how to use Fusion360 a little bit more and now the alignment for the nozzles should fit properly. I've had to get rid of the Bambu Lab logo but I think that's a good trade off. Just wanna say what a great printer the A1 Mini is, the speed and quality is so good that I've more time to spend on designing and printing things. This would've taken me a lot longer on my old printer. &nbsp;The changes include: <ul><li>Holds 4 nozzles instead of 3</li><li>Space for nozzle cleaner/unclogging tool</li><li>Space for spare cutters, nozzle wiper and a PTFE remover (which can be downloaded here <a target="_blank" href="https://makerworld.com/en/models/79328#profileId-83766" rel="nofollow noopener">PTFE Tube Remover V2.1 for the A1 Mini Remixed by R3DPanda - MakerWorld</a> - made my R3DPanda) </li><li>More finger space to pick up tools as some things were a little hard to remove.</li></ul>If uploading STL files, you need to select both files and load them as a single file. &nbsp;Thanks for the feedback everyone! Hope you like this version!&nbsp;Link for the Toolbox used in the photos:<a target="_blank" href="https://makerworld.com/en/models/65527#profileId-68895" rel="nofollow noopener">A1 Mini Tool Box - Multi Color by hfoster52 - MakerWorld</a> &nbsp;

V2 Accessories Tray for A1 Mini - 4 Nozzles

A1 Mini tools

mcgybeer

Articulated Lizard, the original!No supports or assembly required. Just slice and print!!

Articulated Lizard v2

Articulated

DublerIno

simple fruit crate, for home organization, scale for your needs. made in blender&nbsp;&nbsp;!! also check NEW different sizes on my profile !! :D

Small crate, storage box

Handig

martin.taichl

This is my Rocinante model which is supposed to represent the Rocinante ship as it featured in the very last episode of the season 6 of the show Expanse. It has CSL plating, railgun, PDCs and torpedo tubes. The model is 50cm long and has several features. - Retractable PDCs - Posable landing legs - Retractable Airlock cover - Extendable Air-bridge. - Attachable stand Model is once again a kit so you do not need a glue (with one exception described in the assembly video). I highly recommend to look at this video to know, how to assemble everything together: <figure class="media"><div data-oembed-url="https://youtu.be/M02tMysBd8A"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/M02tMysBd8A" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Rocinante from the Expanse

the expanse

Skadis

Kardes.Design

The Kiyomi Japanese Lamp is a sleek and stylish lighting fixture that embodies the essence of simplicity. Its interchangeable panels that are influenced by Japanese design, create a relaxing and beautiful ambiance, making it the perfect addition to any space.&nbsp;The <a target="_blank" href="https://makerworld.com/en/models/31480#profileId-33790" rel="nofollow noopener">panel template</a> is available for the community to remix as they wish. I will add more panels in the future as well.&nbsp;<ul><li>Effortless Printing: No support material needed for printing, making it a hassle-free experience.</li><li>Works seamlessly with <a target="_blank" href="http://shrsl.com/4k363" rel="nofollow noopener">Bambu Lab&#39;s LED lamp kit</a> and a generic LED strip.</li><li>Assembly Made Easy: Snap together with ease - no glue or extra hardware required.</li><li>Everything is printable on all Bambu lab printers including the A1 mini</li><li>Print profiles for Non-AMS and AMS users</li><li>Fully compatible with my <a target="_blank" href="https://makerworld.com/en/u/2706903410/collections/57878" rel="nofollow noopener">mystic lamp panels collection</a>. Dozens of panels available!</li></ul>Print instructions:colored AMS and Non-AMS 3MF Files with perfect print settings are available for all models!Main structureLayer height: 0.2Infill: 10%Bottom/top layers: 4Walls: 2&nbsp;I uploaded an alternate simple version in case you wanted a more basic look.<figure class="table" style="width: 62.82%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td>Default Stylized version</td><td><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000061878/design/2023-11-11_8cb6067ebbc09.jpg"></figure></td></tr><tr><td>Basic Version (The stylized top fits the basic version)</td><td>&nbsp;<figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000061878/design/2023-11-11_9a6bc6179ffd2.jpg"></figure>&nbsp;</td></tr></tbody></table></figure>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Panels:&nbsp;Non-AMS VersionPrint the NON-AMS version print profile if you do not have the AMS. It has preprogramed Pauses for color changes. I made them only 2 or 3 colors per panel to make it easier. just start with white or another light color and end with black. You can choose the color in between.&nbsp;&nbsp;AMS Version&nbsp;Print directly with from the print profile and easily change colors. I separated each color change to a separate object.You can choose green for example instead of Purple by just changing the second layer object.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000061878/design/2023-11-11_d5abd30b602c8.png">You can use 3 colors instead of 4 if you do not have different shades. In the examples below I only used <a target="_blank" href="http://shrsl.com/4k35g" rel="nofollow noopener">White</a>/<a target="_blank" href="http://shrsl.com/4k35k" rel="nofollow noopener">Purple</a>/<a target="_blank" href="http://shrsl.com/4k35q" rel="nofollow noopener">Black</a>. And <a target="_blank" href="https://shrsl.com/4k35g" rel="nofollow noopener">White</a>/<a target="_blank" href="http://shrsl.com/4k35u" rel="nofollow noopener">Green</a>/<a target="_blank" href="http://shrsl.com/4k35q" rel="nofollow noopener">Black</a>.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000061878/design/2023-11-11_a6d00ec8974f.jpg">&nbsp;Colors used for other panels:<a target="_blank" href="https://shrsl.com/4k35k" rel="nofollow noopener">Bambu Lab PLA Sparkle Royal Purple</a><a target="_blank" href="https://shrsl.com/4k35g" rel="nofollow noopener">Bambu Lab PLA Matte ivory white</a> (Alternatively <a target="_blank" href="http://shrsl.com/4k35x" rel="nofollow noopener">Basic Jade White</a>)<a target="_blank" href="http://shrsl.com/4k362" rel="nofollow noopener">Bambu Lab PLA Matte Sakura Pink</a><a target="_blank" href="https://shrsl.com/4k35q" rel="nofollow noopener">Bambu Lab PLA Matte Charcoal </a>( Alternatively <a target="_blank" href="http://shrsl.com/4k361" rel="nofollow noopener">Basic Black</a>)&nbsp;Lighting:&nbsp;All pictures were taken with the <a target="_blank" href="http://shrsl.com/4k363" rel="nofollow noopener">Bambu Lab Led lamp kit 001</a>. It is perfect for the lamp and provides more than enough lighting.&nbsp;Print the LED channel if you don&#39;t have the Bambu lab LED kit.&nbsp;The channel can fit around a 2 meters. you do not need to cut the strip if its longer. instructions below.&nbsp;<figure class="table" style="width: 278.968px"><table class="ck-table-resized" style="border: 1px double rgb(179, 179, 179)"><colgroup><col><col></colgroup><tbody><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><a target="_blank" href="http://shrsl.com/4k363" rel="nofollow noopener">Bambu Lab LED lamp kit</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000061878/design/2023-11-11_6ca67e2e24af1.jpg"></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000061878/design/2023-11-11_034b388203e19.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000061878/design/2023-11-11_26d242b5e773a.jpg"></figure></td></tr><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">Generic LED strip( 2meters)</td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000061878/design/2023-10-24_572427393436.gif"></figure></td></tr></tbody></table></figure>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Hi, I&#39;m a student and love creating functional and beautiful designs optimized for 3D printing.if you like my work consider supporting me with these options:<ul><li><a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=6VL4LD2NAJJ86" rel="nofollow noopener">Paypal</a></li><li><a target="_blank" href="https://www.buymeacoffee.com/KardesDesign" rel="nofollow noopener">Buymeacoffee</a></li></ul>

Kiyomi Japanese Lamp (Bambu Lab Led Lamp kit 001)

Japan themed

Lozagon1234

Immerse yourself in the iconic world of Apple with our Apple Logo LED LightBox 3D model, featuring the classic multicolored Apple logo. This lightbox is a stylish and modern addition to any space, showcasing the timeless design that represents innovation, creativity, and technology.Classic Multicolored Apple Logo Design: Step into the world of innovation with a lightbox that proudly showcases the classic multicolored Apple logo. The instantly recognizable design captures the essence of Apple's commitment to design excellence, making it a sleek centerpiece for any tech enthusiast's collection.Optional LED Enhancement: Elevate the modern ambiance with optional LEDs that enhance the multicolored Apple logo. Illuminate the iconic emblem with customizable lighting options, casting a vibrant and captivating glow in your space. Immerse yourself in the world of Apple with the captivating illumination of the LED-enhanced lightbox.Easy 3D Printing: Designed for simplicity, this 3D model is optimized for easy printing on standard 3D printers. The user-friendly design ensures a straightforward assembly process, allowing you to effortlessly incorporate the Apple Logo LED LightBox into your home, office, or tech-themed space.Customization Possibilities: Express your love for technology by experimenting with different filament colors to match your personal style or complement your surroundings. The modular design of the Apple Logo LED LightBox allows for easy customization, making it a versatile and personalized addition to your tech-inspired decor.Perfect for Tech Enthusiasts: Whether you're a dedicated Apple user, a tech enthusiast, or someone who appreciates sleek design, this 3D model is perfect for individuals seeking a visually immersive touch. Showcase your passion for innovation by proudly displaying the Apple Logo LED LightBox in your living room, office, or dedicated tech space.Explore More: If you've been captivated by the design excellence of Apple, we invite you to explore our diverse collection of 3D models. From iconic symbols to modern designs, our range caters to those who appreciate the cutting-edge world of technology. Download now and bring the spirit of innovation to your surroundings!

Apple Logo LED LightBox

Lightboxes

Wickieprints

Made another edition of Verstappens Keychain. Use AMS or layershift. Enjoy&nbsp;&nbsp;You can sell our designs we made and are available on our makerworld page. Wit a small sub on our Patreon you get a commercial license to sell and back our non profit founding for Children with special needs: <a target="_blank" href="https://www.patreon.com/wickieprints/posts" rel="nofollow noopener">https://www.patreon.com/wickieprints/posts</a>&nbsp;

Verstappen Keychain

Keychains

JamesThePrinter

Mario themed display stand for your Game Boy Advance. It can be printed as an overworld or underground level.&nbsp;Print SettingsSupports are required for the pipe only. Although the pipe can be printed in more than one orientation, I recommend printing as is. This will hide any support scarring underneath your GBA.&nbsp;Assembly InstructionsPress the pipe firmly onto the base in the correct orientation. I recommend gluing in place once you've confirmed the orientation.&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The following filaments were used in the pictures above:<ul><li>Amolen Red Wood PLA</li><li>polymaker PolyTerra Forrest Green PLA</li></ul>

Mario Themed GBA Display Stand

gaming

Frank3D

An easy and fast multicolor print of Formula 1 themed coaster with logo and holder. You can print it choosing different colors combinations, as you can see in the differente pictures or with three colors, you choice.

Formula 1 coaster, with F1 logo

formula 1

christofer.jh

The one ring, need I say more?&nbsp;Hang on the wall or just put it on a table. The ring is a whole 160mm in diameter!&nbsp;I printed with Bambu PLA silk - Gold.&nbsp;<h2>Current version 2.0 - Now better shine!</h2>Warning, the new back plate is much more secured when inserted. Make sure led is installed before closing.&nbsp;The assembly is easy, just take about 50cm led strip and put it in the ring, like this:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163169/design/2024-02-14_9d0f0db27d1.jpg"></figure>Or alternative slide it in above the internal “bride”, this way you can get two loops for more light.&nbsp;Holder remixIf you want a stand take a look at this remix: <a target="_blank" href="https://makerworld.com/en/models/467240#profileId-376287" rel="nofollow noopener">https://makerworld.com/en/models/467240#profileId-376287</a><h3>Revisions:</h3>v 2.0Total redesign of the inner space of the ring and the back plate. The led strip is now held in place which gives a more uniform shine. Slightly bigger radius on the top of the ring.The back plate also snaps to the ring better, DON&#39;T PUT ON UNTIL LED IS INSERTED.v 1.1<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163169/design/2024-01-30_7d6ab2acdbc06.jpg"></figure><ul><li>Added a optional back plate that snaps in place. Use the chord for hanging on wall, or drill a hole for a nail (or use bambu studio and add a hole)</li></ul><figure class="image image_resized" style="width: 23.9%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163169/design/2024-01-31_2e6cf6cbfd73d.jpg"></figure><figure class="image image_resized" style="width: 24.71%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163169/design/2024-01-31_e9eca6e2a85f3.jpg"></figure>

The one ring - The Lord of the Rings

LOTR

I saw πxel8ed version of the suspended millenium falcon and i was inspired to make my own version.. i thought making the ship facing front with the strings looking like the streaking of lightspeed.. the falcon model by aaskedall from thingerverse was already a great design so i just used his model as a remix.. i did have to slightly change the model so it will print for a smaller version for my suspended millenium falcon..&nbsp;UPDATE:I have uploaded a new version model V3 that can be color picked for multicolor printing.. just learned how to do it.. unfortunately i cant edit the old print profile.. so you'll have to add them manually&nbsp;UPDATE 2:I made a LED version of the suspended millennium falcon that is backlite using led strips.. it is an addon part that will connected to the suspended ship.. so you just have to print the addon LED parts only.. not the whole ship.. i've upload the file at <a target="_blank" href="https://makerworld.com/models/113145" rel="nofollow noopener">https://makerworld.com/models/113145</a> <img src="https://makerworld.bblmw.com/makerworld/draft/491035/2023-12-30_4312a40409637.gif">

Suspended Millennium Falcon

Star Wars

RP47 Designs

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ Sunlu White Transmission Distance: 5&nbsp;Swap Instructions: Start with Black At layer #17 (1.44mm) swap to Grey At layer #23 (1.92mm) swap to White for the rest.