FidgetCubes – Twist, Bend & Build Anything! Say hello to FidgetCubes — a simple, surprisingly addictive little toy that encourages creativity, fidgeting, and pure imagination. Each set contains 27 connected blocks (or more?!) that can twist, bend, fold, and transform into whatever your mind comes up with. There’s no “correct” way to use them — and that’s exactly the fun.

🍪 Gingerbread Figures – Cute, Fun & Full of Personality! Why settle for just one when you can have a whole collection? These gingerbread figures come in 9 different designs, each with their own charm — from classic and cozy to a bit more cheeky. One of them originally showed the finger, and not everyone appreciates that… so there’s also a censored “bite‑mark” version you can use instead 😄

#Milestone #Mymakerspace #Bambulabblackfriday ✨ MakerShed Update – 220kg Filament & More Printers! ✨ This one feels almost unbelievable to write. The latest supply drop wasn’t just “a few boxes” — it was around 220 kilograms of filament, plus new build plates, two fresh Bambu Lab printers, P1S ams 2 Combo and a A1 Mini, and a handful of other goodies. 🚀 The photos tell the story better than words: First, the mountain of 13 boxes stacked up (with two arriving the day before, and two more still on the way). Then the aftermath — all boxes emptied. Funny enough, unpacking filament is way more tiring than it looks… cardboard wrestling should probably count as a workout. 😅 Next, the doorway shot, where the sheer volume of filament is piled high like a wall of color. And finally, inside the MakerShed, where almost everything now has its place, ready for action. Looking back, it’s wild to see how far things have come. At the start of this year, I had just one printer and zero followers here on MakerWorld. Now, thanks to this community, I’ve earned enough points to fund four P1S AMS2 Combos, an A1 Mini, and I’m already close to another A1 Mini — which I’ll either raffle off to a customer this holiday season or donate to a school. Still deciding, but either way, it feels amazing to be able to give something back. 🙏 Over 1300 of you now follow my journey, and every download, boost, and print has made this possible. It’s not just about machines or filament — it’s about the shared passion, creativity, and support that fuels all of this. From juggling one printer in a spare room to running a fully stocked workshop with shelves of filament and multiple machines — this has truly become something bigger than I imagined. With gratitude, excitement, and probably a bit of PLA dust still floating around, Ivan André – MakerShed / Skaperboden ✨🛠️(Edited)

🌫️ Passive Mini HEPA Filter for xTool F1 (and more) Engrave anywhere — without turning your workspace into a smokehouse. 🪄 This compact passive HEPA filter module is designed to reduce dust and airborne particles from your xTool F1 laser. It’s small, modular, and simple to print — perfect for mobile setups, small rooms, or quick engraving sessions where you want cleaner air and less debris.

🍿 Snack Stick v2 – Stronger, Smoother, Smarter. Snack like a pro — no greasy fingers, no keyboard crumbs. 🎮💻 Whether you’re gaming, editing, printing, or pretending to “work from home,” this v2 Snack Stick keeps your hands clean and your snacks close. Redesigned from the ground up for better grip, stronger arms, and smoother action — this version feels solid, balanced, and way more durable than before. Same idea, new attitude.

AMS 6-Pin Cable Quick-Release Cover ⚙️ Snap on. Pull off. Simple, clean, effective. 🔌 This handy little part makes it easier to disconnect your Bambu Lab AMS 6-pin cable — no twisting, no pulling at awkward angles. Just press it on, and it sits exactly where it’s supposed to. When you need to disconnect, a simple pull is all it takes.

AMS 2 Pro Power Brick Wall Mount ⚡ Tidy cables. Free desk space. Better workflow. 💪 This set of mounts keeps your Bambu Lab AMS 2 Pro power bricks neatly organized and securely off your workspace. Choose between 1-, 2-, or 3-brick holders depending on your setup — whether you’ve got one AMS or a full printing army. Simple, clean, and rock-solid — exactly how a workspace should be.

Snapmaker A350T Quick-Swap Toolhead System ⚙️🛠 This pack includes two parts that make toolhead changes on your Snapmaker A350T faster, safer, and much more convenient: a Quick-Swap Toolhead Plate that lets you switch modules in seconds, and a Wall Mount Dock so your unused heads have a proper home instead of lying around your desk. And as a bonus, there’s a small IR Laser Pin Fix — a simple part that prevents the IR laser from dropping too far into its guide slot

Bottle & Can Openhelper 🍻🛠 This compact multitool is designed to make opening drinks effortless for everyone — whether you’re at a picnic, in the workshop, or just need a hand when your fingers don’t quite agree with stubborn tabs or tight caps. 💪 It works as both a bottle opener and a soda can tab lifter, perfect for anyone who could use that small extra bit of leverage — from makers with busy hands to those with reduced grip strength or joint pain.

#Milestone #New Year's Resolution #How I started #happy #Gratitude #Sharingmakes #mymakerspace #Rate My Setup #Thank You! ✨ Workshop Update – “The MakerShed” is alive! ✨ Here’s the update as promised — and yes, it’s finally real! The annex you see in these pictures is technically a “spikertelt” (for my international friends: it’s what Norwegians often build next to their caravans as a cozy extension). This one, however, was fully funded by income from my small business Skaperboden (aka MakerShed) — and it has now become my dedicated creative workshop! 🛠️ As you can see, things are up and running — three Bambu Lab P1S Combo printers with AMS 2 Pros are in place (thanks again to MakerWorld points! 🙏), along with a neat little corner for laser engraving, soldering, painting, assembling, and general tinkering. I’ve also set up my xTool F1 Ultra and Snapmaker A350T, each with their own workspace, plus three servers running local “cloud” storage and game servers — because of course, why not. 😅 It’s technically “done,” but there’s still a lot left to organize, label, and fine-tune. Still — I can finally say I have a proper creative hub, built from scratch, powered by passion (and caffeine). ☕ This feels surreal. Just a few weeks ago, I was juggling machines between rooms in the house; now I have a full-blown creative workshop just a few meters from my door. I’ll be sharing more behind-the-scenes soon — including some of the first projects made entirely here in “The MakerShed.” From the north of Norway — North of the wall 😅 With gratitude, excitement, and probably a bit of PLA dust, Ivan André – MakerShed / Skaperboden

#Milestone #New Year's Resolution #How I started ✨ Truly Grateful – Thank You, MakerWorld! ✨ I just want to take a moment to share my gratitude with all of you. Thanks to your downloads, boosts, and prints of my models, I’ve been able to do something I honestly didn’t think possible a few months ago: I’ve now ordered not one, but three Bambu Lab P1S Combo printers with AMS 2 Pro – and almost entirely funded through points from this amazing community! 🤯 That feels absolutely surreal to write. It’s not just the printers themselves, but what they represent: how much we can achieve together when we share, support, and inspire each other. Every little download or boost has made a difference – and it all adds up. So from the bottom of my heart: thank you. ❤️ But that’s not the only milestone I’m celebrating. My little family-run venture here in Norway, Skaperboden, has done so well this year that I’m finally getting my very own dedicated workshop. Up until now, I’ve had printers spread across different rooms in the house – even the guest room was pressed into service. 😅 Next week, a annex/"shed" will be ready, and all my machines will move in. For the first time ever, I’ll have a proper space just for creating. This really feels like the start of a new chapter. With more room, more focus, and more tools, I’ll be able to design, test, and share even more. And of course, I’ll keep giving back here on MakerWorld, because without this community, none of this would have been possible. I’ll post an update as soon as “The MakerShed” is officially up and running – complete with a little behind-the-scenes look at how I’ve set things up. Until then: thank you again for being part of this journey. Here’s to more designing, sharing, inspiring, and building something bigger together – one model at a time. 🙌 With love and gratitude from the north of Norway, Ivan André – MakerShed (Skaperboden)

Keep your fingers warm (and dry!) while enjoying your favorite pint! This snug little sleeve slides right over standard ice cream pints (up to 465 ml) — designed around a Ben & Jerry’s cup. It adds comfort, keeps condensation off your hands, and even helps your ice cream stay colder longer. And yes… it fits two teaspoons at once for sharing (or not sharing, no judgment here 😉). Plus, the built-in drip tray at the bottom collects condensation, so you don’t end up with a soggy mess.

F1 Ultra Jigs – Mega pack 11 Piece Set ⚡🛠 Take your xTool F1 Ultra to the next level with this full set of jigs! These fixtures make engraving and embossing simple by locking items in place for accurate and repeatable results. From dog tags to bottle openers, business cards to coasters—this set covers it all. Each jig matches a real product (links included below), so you know exactly what fits.

A Classic Puzzle, Reimagined for 3D Printing The T-Box Puzzle is one of those deceptively simple brain teasers that’s guaranteed to frustrate and entertain. Your goal? Fit all six T-pieces into the box so they form a perfect flat layer. Sounds easy, right? It’s not—but that’s what makes it fun! Perfect as a desk toy, giveaway item, or market table curiosity, this puzzle is a great conversation starter and a satisfying "aha!" moment when you finally crack it.

A1 / A1 Mini Cable Guide 📦 📌 Two small guides—big difference! These little helpers snap onto your Bambu Lab A1 or A1 Mini and help tame that wild cable. One fits by the extruder, the other by the filament cutter on the right side. Less wobble, cleaner setup. 🛠 Supports required – please use the included print profile! It's optimized so the supports are exactly where they need to be. 💨 Prints quick, installs in seconds.

AMS Lite – Top Mount for Bambu Lab A1 🎯 🌀 Free your desk. Elevate your AMS. This sturdy top-mount lets you attach your AMS Lite directly on top of the A1, instead of having it off to the side. Perfect if you're working with limited space—or just want a cleaner setup. 🧼 Designed for a tight fit, it helps keep things aligned and balanced. 👉 Just remember: mount it with the latch facing the back!

A1 Mini – Top Mount Spool Holder 🎯 📦 Tired of the side mount getting in your way? This clean little upgrade lets you mount your spool directly on top of the A1 Mini, freeing up desk space and making the whole setup feel more compact. Great for tight spaces, enclosures, or just because it looks better. 😎

Snap-On Soda Can Lid & Opener 🥤 🛒 Free for Small Sellers Collection Credit is appreciated – enjoy! 😊 All I ask is that you give credit where credit is due. 💙 This clever little gadget snaps right onto your standard EU soda cans (both fat and slim), keeping bugs, dust, and other unwanted party crashers out of your drink. 🍋🪰 But it’s more than just a lid—it's also an opener! Just swivel the top and pop goes the can. When you're not sipping, rotate the lid back to seal it up.

🏆 Tiny Champion – Trophy Set Because sometimes, you just need a trophy for anything. One day, out of nowhere, one of my kids became utterly obsessed with trophies. Not sports, not competitions—just the idea of owning a trophy. And honestly? I get it. There’s something magical about that shiny, elevated proof that you did something awesome—even if that “something” is just being the Best Big Brother, the Fastest Cereal Eater, or Winner of “Most Dramatic Fall on a Trampoline.”

🐝 Frisbee Mini & Maxi Edition – With Honeycomb & Low Poly Bee Design A frisbee with style—and attitude! This fun little disc comes in two sizes, perfect for different display setups or scaled figures. One side features a sleek honeycomb pattern, while the other shows off a sharp low poly bee design. It’s simple, it’s functional, and it adds a buzz to any scene.