Magnus_

PLA 0.2mm layer, 2 walls, 7% infill

Moes Dimmer Switch Box with push button hole

PETG 0.16mm layer, 2 walls, 15% infill

TPU 0.2mm layer, 3 walls, 15% infill

Boox Nova 3 (Color) Case v1

Honeycomb bottom 0.2mm layer, 2 walls, 15% infill

Wet wipes wall mount with command strips - Thinner Remix

0.2mm layer, 3 walls, 15% infill

Pimmm89

Skadis Garmin Watch Bands Holder (8 Bands)

Bambulab X1(c)/P1P Fan Muffler HEPA Filter Mod

Bambu Lab X1(c)/P1P Fan Muffler HEPA Filter Mod

marian.huebner

0.2mm layer, 6 walls, 15% infill, 5 top/bottom

Parkside Dremel Skadis Holder

Ciprian

0.2mm layer, 3 walls, 20% infill A1 Mini

Parkside 20v Charger Skadis holder (now stronger with universal hook)

Wall Mount Tampon Dispenser EU sizes

ChanZerv

ASA 0.2mm layer, 2 walls, 10% infill

Mob Holder REMIX extra short (Roborock S7) 

Tjoene

Full Dice Set Kitcard V1

V1 duo color 0.2mm layer, 2 walls, 15% infill

UlleiJ

LED Strip profile 45 degree

0.28mm layer, 2 walls, 5% infill

Awesome! For me the base print always failed after a certain height but the design makes it easy to just cut the failed part down with a knife. Awesome design

VersusMakes

Gridfinity Base Storage Box by Pred Remix

*MULTIPLE SIZE* 0.2mm layer, 2 walls, 15% cubic infill

Jaldrich2426

Case for DnD Spell Area of Effect Templates

0.2mm layer, 2 walls, 15% infill

Great Design, but there are two little problems. For one it's a lot of magnets, you have to watch your fingers closing the lid otherwise that may hurt. And the second problem is the number of color changes in this print profile. I actually changed the profile for far less color changes and it still looks great 

Wet PLA Guru

Slim Passport Case

0.2mm layer, 3 walls, 25% infill

3Deen-Druck

DnD Status Ringe

0.08mm layer, 2 walls, 15% infill

JoshAndCaro

Rugged Dice Case

The whole box being elevated off the build plate leads to lots of wasted filament and will very possibly ruin the tops of the boxes.

Edit: the new profile prints flawlessly. Thanks for the update

JSMPFOG

Simple Handle for sliding door

0.16mm layer, 2 walls, 15% infill

3D-Bude Wesermarsch

Bierflaschendeckel mit Dichtring

AMT_MW

Fillet Diameter Radius Gauge - Stand Alone Variants

The three variants with raised glyphs - 0.2mm layer, 2 walls, 25% infill

KYZ Design

KYZ FF2 High Airflow Spool Desiccant Holder

PLA/PETG

Prints well and seems like a good design. Thanks

pmorgan

6x2x60mm Gridfinity Silverware Tray

0.2mm layer, 3 walls, 20% infill

I love the design! Now my drawer looks decent again

squinn

Open Cage Stackable Plant Support Stakes

11 cm Tall, 0.2mm layer, 4 walls, 15% infill

jarvizar

Hamburg Germany 3D Miniature

Designer Profile (0.16mm layer, Grid infill)

eds_3d_shop

v.2.0 AMS Feeding Funnel Protector Filament Guide

Textured Plate 4xBambuLab Logo v.2.0 AMS Protector-Set [PLA] 0.16mm layer,2 walls,20% infill