AU3D

<h3>Key Advantages</h3><ul><li>Only 7g of filament per ring.</li><li>Compatible spool brand name impressed.</li><li>Rounded contour helps with traction, avoids pullback errors and stabilizes the spool inside the AMS.</li><li>Rounded contour lowers the chance of damaging plastic storage bags.</li><li>Flat variant for full AMS compatibility (see tolerance and compatibility section)</li></ul><h3>Update</h3>25.03.2024: Corrected wrong brand label on 199mm flat variant. Added 199mm STLs and 3MF files to RAW files download<h3>Description</h3>This isn&#39;t merely a typical cardboard spool adapter. By decreasing its contact area by approximately 50-60% compared to standard adapters, it significantly enhances contact pressure. Consider it akin to winter tires on a car, which generally require higher pressure to minimize their contact area with the ground. Additionally, its rounded edges help stablizing the Spool inside the AMS and minimize the likelihood of damaging plastic vacuum bags. The adapter is not only lightweight, weighing a mere 7 grams of filament, but it is also reusable and easily attaches in the same manner as conventional adapters.&nbsp;This adapter has proven to be a game-changer, eliminating the need for other AMS modifications that claim to address retraction and entanglement issues. Remarkably, I’ve found that spool weights are no longer necessary. However, as with any solution, individual results may vary. Happy printing!<h3>Tolerances</h3>Compared to plastic spools, cardboard spools are more vulnerable to various external factors, such as moisture, temperature fluctuations, and variations in the production process (up to +/-2mm). Consequently, you may encounter slight variations in the fit, which can range from slightly looser to tighter. In extreme cases, the spool adapter may not fit at all. In these scenarios, you can make the necessary adjustments to the model&#39;s scale using the Bambu Slicer for both the X and Y axes. Ensure that you uncheck the &#34;uniform scale&#34; option before proceeding. If your spool&#39;s diameter exceeds the default setting, consider increasing the scale by 1%. Conversely, if your spool&#39;s diameter is smaller, reduce the scale by 1%, and your setup should be ready for use.<h3>Compatibilty</h3>Elegoo Cardboard Spools tend to be on the larger side of the spectrum. While they can fit without an adapter, when paired with the rounded adapter, the 200mm variant surpasses Bambu Labs’ specifications. The rounded 199mm variant is within the specs but it comes down the the individual spool as the adapter might get strechted past the specs. Consequently, users have a couple of options to address this:<ul><li>AMS Lid Spacer: Utilizing a spacer for the lid can accommodate the larger spools effectively.</li><li>Custom Backside Rollers: Consider implementing custom backside rollers specifically designed to support larger rolls.</li><li>For a straightforward solution, leaving the lid open (or at least not locking it) provides ample room for the spool.</li></ul>For individuals who prefer not to alter their AMS and wish to close the lid, I have incorporated a nearly flat variant that aligns with Bambu Labs’ specifications.<h3>Printing</h3>When it comes to printing, you should produce two adapters for each cardboard spool. It is advisable to steer clear of materials that exhibit low friction, such as Silk-PLA, to ensure optimal performance. Most of the time I use Standard PLA.<h3>Other Filament Brands</h3>This adapter is available for other brand&#39;s cardboard spools (<a target="_blank" href="https://makerworld.com/en/@AU3D/collections/565167" rel="nofollow noopener">Link to Collection</a>):<ul><li><a target="_blank" href="https://makerworld.com/en/models/251717" rel="nofollow noopener">3DGenius</a></li><li><a target="_blank" href="https://makerworld.com/en/models/233956" rel="nofollow noopener">3DHojor</a></li><li><a target="_blank" href="https://makerworld.com/en/models/197741" rel="nofollow noopener">Aceaddity</a></li><li><a target="_blank" href="https://makerworld.com/en/models/197938" rel="nofollow noopener">ANYCUBIC</a></li><li><a target="_blank" href="https://makerworld.com/en/models/197839" rel="nofollow noopener">ATA</a></li><li><a target="_blank" href="https://makerworld.com/en/models/377775" rel="nofollow noopener">Bblife</a></li><li><a target="_blank" href="https://makerworld.com/en/models/254552" rel="nofollow noopener">Colorful</a></li><li><a target="_blank" href="https://makerworld.com/en/models/192941" rel="nofollow noopener">Comgrow</a></li><li><a target="_blank" href="https://makerworld.com/en/models/492894" rel="nofollow noopener">Copymaster 3D</a></li><li><a target="_blank" href="https://makerworld.com/en/models/192757" rel="nofollow noopener">Creality</a></li><li><a target="_blank" href="https://makerworld.com/en/models/253694" rel="nofollow noopener">CUIEED</a></li><li><a target="_blank" href="https://makerworld.com/en/models/251342" rel="nofollow noopener">Dikale</a></li><li><a target="_blank" href="https://makerworld.com/en/models/376740" rel="nofollow noopener">DO3D</a></li><li><a target="_blank" href="https://makerworld.com/en/models/237701" rel="nofollow noopener">Duramic 3D</a></li><li><a target="_blank" href="https://makerworld.com/en/models/180213" rel="nofollow noopener">Elegoo</a></li><li><a target="_blank" href="https://makerworld.com/en/models/194714" rel="nofollow noopener">ENISINA</a></li><li><a target="_blank" href="https://makerworld.com/en/models/456459" rel="nofollow noopener">Eono</a></li><li><a target="_blank" href="https://makerworld.com/en/models/175447" rel="nofollow noopener">Eryone</a> / <a target="_blank" href="https://makerworld.com/en/models/372282" rel="nofollow noopener">Eryone 2024+</a></li><li><a target="_blank" href="https://makerworld.com/en/models/180253" rel="nofollow noopener">eSun</a></li><li><a target="_blank" href="https://makerworld.com/en/models/246501" rel="nofollow noopener">Filafarm</a></li><li><a target="_blank" href="https://makerworld.com/en/models/377992" rel="nofollow noopener">Firos</a></li><li><a target="_blank" href="https://makerworld.com/en/models/376304" rel="nofollow noopener">Flashforge</a></li><li><a target="_blank" href="https://makerworld.com/en/models/196175" rel="nofollow noopener">FormFutura</a></li><li><a target="_blank" href="https://makerworld.com/en/models/505839" rel="nofollow noopener">Gembird</a></li><li><a target="_blank" href="https://makerworld.com/en/models/375168" rel="nofollow noopener">GNVTNTP</a></li><li><a target="_blank" href="https://makerworld.com/en/models/192804" rel="nofollow noopener">GratKit</a></li><li><a target="_blank" href="https://makerworld.com/en/models/246162" rel="nofollow noopener">Grauts</a></li><li><a target="_blank" href="https://makerworld.com/en/models/253905" rel="nofollow noopener">Inland</a></li><li><a target="_blank" href="https://makerworld.com/en/models/254313" rel="nofollow noopener">IWEColor</a></li><li><a target="_blank" href="https://makerworld.com/en/models/192773" rel="nofollow noopener">JAMG HE Conjure</a></li><li><a target="_blank" href="https://makerworld.com/en/models/175622" rel="nofollow noopener">Jayo</a></li><li><a target="_blank" href="https://makerworld.com/en/models/176924" rel="nofollow noopener">Kexcelled</a></li><li><a target="_blank" href="https://makerworld.com/en/models/489368" rel="nofollow noopener">Kingroon</a></li><li><a target="_blank" href="https://makerworld.com/en/models/375526" rel="nofollow noopener">Kinluot</a></li><li><a target="_blank" href="https://makerworld.com/en/models/249610" rel="nofollow noopener">Kretrum</a></li><li><a target="_blank" href="https://makerworld.com/en/models/252594" rel="nofollow noopener">Lovoon</a></li><li><a target="_blank" href="https://makerworld.com/en/models/376013" rel="nofollow noopener">Mchyi</a></li><li><a target="_blank" href="https://makerworld.com/en/models/245976" rel="nofollow noopener">Meltbro</a></li><li><a target="_blank" href="https://makerworld.com/en/models/253497" rel="nofollow noopener">MKOEM</a></li><li><a target="_blank" href="https://makerworld.com/en/models/194179" rel="nofollow noopener">Ninetec</a></li><li><a target="_blank" href="https://makerworld.com/en/models/245837" rel="nofollow noopener">OEM Mika3D</a></li><li><a target="_blank" href="https://makerworld.com/en/models/175704" rel="nofollow noopener">Overture</a></li><li><a target="_blank" href="https://makerworld.com/en/models/237378" rel="nofollow noopener">OVV3D</a></li><li><a target="_blank" href="https://makerworld.com/en/models/177047" rel="nofollow noopener">Polymaker</a></li><li><a target="_blank" href="https://makerworld.com/en/models/254827" rel="nofollow noopener">Protopasta</a></li><li><a target="_blank" href="https://makerworld.com/en/models/239790" rel="nofollow noopener">R3D</a></li><li><a target="_blank" href="https://makerworld.com/en/models/238604" rel="nofollow noopener">Raise3D</a></li><li><a target="_blank" href="https://makerworld.com/en/models/206466" rel="nofollow noopener">Redline Filament</a></li><li><a target="_blank" href="https://makerworld.com/en/models/234098" rel="nofollow noopener">Reprapper</a></li><li><a target="_blank" href="https://makerworld.com/en/models/492951" rel="nofollow noopener">Prima Creator</a></li><li><a target="_blank" href="https://makerworld.com/en/models/193658" rel="nofollow noopener">Prindano</a></li><li><a target="_blank" href="https://makerworld.com/en/models/196488" rel="nofollow noopener">SainSmart</a></li><li><a target="_blank" href="https://makerworld.com/en/models/194367" rel="nofollow noopener">Sovol</a></li><li><a target="_blank" href="https://makerworld.com/en/models/242422" rel="nofollow noopener">Spectrum</a></li><li><a target="_blank" href="https://makerworld.com/en/models/235861" rel="nofollow noopener">Sunlu Elite Series</a></li><li><a target="_blank" href="https://makerworld.com/en/models/194269" rel="nofollow noopener">Tinmorry</a></li><li><a target="_blank" href="https://makerworld.com/en/models/206360" rel="nofollow noopener">Tronxy</a></li><li><a target="_blank" href="https://makerworld.com/en/models/238095" rel="nofollow noopener">TTYT3D</a></li><li><a target="_blank" href="https://makerworld.com/en/models/194520" rel="nofollow noopener">Two Trees</a></li><li><a target="_blank" href="https://makerworld.com/en/models/236118" rel="nofollow noopener">Yousu</a></li><li><a target="_blank" href="https://makerworld.com/en/models/234380" rel="nofollow noopener">YOYI YOYI</a></li></ul>

ELEGOO Cardboard Spool Adapter

spool

Lov3d

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used: PETG JAYO Black Transmission Distance: 0 PLA+ IIID Max Light Blue Transmission Distance: 8.3 PLA+ IIID Max Vintage Rose Transmission Distance: 12 PETG JAYO White Transmission Distance: 6&nbsp;!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!&nbsp;Swap Instructions: Start with Black At layer #5 (0.48mm) swap to Light Blue At layer #10 (0.88mm) swap to Vintage Rose At layer #14 (1.2mm) swap to White for the rest.

Spiderman Art (HueForge)

hueforge 

uhltimate

Elevate your archery experience with this exceptional 3D printed bow model, designed for both safety and precision. Crafted for the creative DIY enthusiast, this project allows you to explore three different arrow options, catering to various purposes.&nbsp;Features:Round Tip Arrows: Ideal for target practice and recreational shooting. The rounded tips ensure safety without compromising on performance.Broadhead Arrows: For those seeking a balance between sport and hunting, the broadhead arrows combine accuracy and lethality. Perfect for small game and outdoor adventures.&nbsp;Bring your 3D printer to life and enjoy the satisfaction of creating your own fully functional bow with this versatile model. Whether you&#39;re a hobbyist or a seasoned archer, this 3D Bow Model will add a new dimension to your archery pursuits.(Note: Always exercise caution and follow local laws and regulations when using this 3D printed bow and arrows, especially the spearhead and broadhead options.)&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/cPONo5l_Z7M"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/cPONo5l_Z7M" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

spool

hueforge

cool

print in place