Maddox_3Dprints

PriscoRulez

Introducing the Trolex, a 3D printed working watch powered by a Miyota 2035 Quartz movement. Shock your watch-collector friends with a custom piece that will certainly attract their interest!With its 41.3mm size, this timepiece can adapt to most wrists and for all the occasions provided you use filaments that suit your taste. It is fully working and relatively easy to put together.Create your own personal wristwatch and show the world your style! Now, I also added a custom text version of the dial for your special messages.&nbsp;&nbsp;Important notes: Dial, hands and back case require a 0.2mm nozzle. The other pieces can also be done with 0.4mm nozzle, to allow more filament options (e.g. marble, sparkle, etc.) but would benefit from a 0.2 nozzle for higher quality.&nbsp;To work the watch requires a Miyota 2035 quartz movement, which is easy to find online and fairly cheap, but could be adapted to other movements by creating a custom inner movement holder. I got 5 for 9£ from Aliexpress here: <a target="_blank" href="https://www.aliexpress.com/item/1005006170752556.html" rel="nofollow noopener">https://www.aliexpress.com/item/1005006170752556.html</a>&nbsp;I do not own an AMS, so the watch is designed to be printed without one, for multi-color dial there is a pause set at the start of the 14th layer and change filament. If you do not want to change filament you will have to resume print to finish it, or remove the pause before slicing the plate. &nbsp;There are now two options for the wristband: flexible to be made with TPU (as in the cover picture) and rigid for any other filament.The rigid version is made up of pieces that need spare filament wire to be held together. This allows to adjust size by removing or adding more pieces.&nbsp;Needless to say the hands are the hardest part to get right and might require a few print (I am still working on a more reliable version of these). For reliability I would recommend buying the hands if you actually plan to use this watch as I do not know how long the 3d printed hands will last or keep the time. The second hands was too small even for the 0.2 mm nozzle.&nbsp;I printed it using a smooth PEI plate, I have not tested it yet on other plates, particularly for hands and back cover which have designs on the bottom surface.&nbsp;Building instructions:I am planning to produce a dedicated video on how to build it, in the meantime the Fusion360 scheme shows more or less where each piece should go.<ol><li>Place the movement in the holder, snap the dial in place over it and insert it into the main case;</li><li>Push in place the back case and force the spacer ring over the dial to secure the movement in place, then add the top ring;</li><li>Attach the wristband pieces using spare filament, the holes have a tight fit so it is best to use some pliers to help pushing the filament through;</li><li>Insert the stem on the movement, pull it into time-set position then screw the crown in from outside the case. (Leave enough play to allow the stem to be pushed in into normal position). Use some super glue here to fix the crown on the stem.</li><li>Set the watch into the time-set position;</li><li>Finally use some precision tweezers to push the hands in place carefully. It is not easy and might require some attempts and patience;</li><li>Turn the crown to check the hands are moving correcly and freely;</li><li>Wear it proudly!</li></ol>

Trolex - the 3D printed working wrist watch

wearables

Aeter42

A case for your Nintendo Switch lite to protect it while you Catch &#39;Em All!!It also has small slots to store your games on the go&nbsp;The 3mf has two plates for the multi-color and single-color versions

Pokedex switch lite case

nintendo

RJ Design

The Mouse!&nbsp;It&#39;s not Ergonomic. It takes up too much space. And it takes a few hours to print!&nbsp;This is the first generation of my Giant Cursor Mouse.&nbsp;When thinking of a good design for a mouse, it feels like it&#39;s all been done before, so i decided i&#39;d go for a fun over function on this one.&nbsp;Its built on the back of the Bambu Mouse Kit and Bambu Mouse Base(<a target="_blank" href="http://store.bambulab.com/products/wireless-mouse-components-kit-002" rel="nofollow noopener">http://store.bambulab.com/products/wireless-mouse-components-kit-002</a>)&nbsp;&nbsp;Printing&nbsp;Being tall and thing this type of print is notoriously for being difficult. I&#39;ve done my best to ensure it works every time but let me know how you get on.&nbsp;The model is designed to be printed upright with Supports. I&#39;ve use strong supports with 15mm brims to help secue it.&nbsp;Printing it upright will maximize its aesthetics.&nbsp;Note: Please be careful when removing supports as some areas (particularly the scroll wheel button) are fragileIf using PLA matte, metal, silk, please slowly screw in the bolt and avoid over-tightening to prevent structural damage.&nbsp;AssemblyThis print is a casing for the Bambu Lab Wireless Mouse 002. Assembly Instructions can be found of the Bambu Mouse Page<a target="_blank" href="https://makerworld.com/en/models/13716#profileId-14573" rel="nofollow noopener">https://makerworld.com/en/models/13716#profileId-14573</a>&nbsp;My WorkAfter many years in Engineering, I&#39;ve just decided to try and follow my childhood dream of becoming of a Creative Designer.A Creative Designer of what? No idea! Right now I really like puzzles, mechanisms and kinetic sculptures so that&#39;s where i&#39;m going to focus my efforts.&nbsp;Help and support is always appreciated. Do let me know if you like my designs or you&#39;ve got any ideas i could help with.&nbsp;My Profile: <a target="_blank" href="https://makerworld.com/en/@RJDesign" rel="nofollow noopener">https://makerworld.com/en/@RJDesign</a>

Giant Cursor Mouse

mouse

BaLuCZ

<h2>3D MODEL DESCRIPTION</h2>This is an articulated print-in-place Skeleton Dragon model that needs NO Supports. Brim is recommended.Included are 2 STL'sA wingless Skeleton Dragon(Drake)A Skeleton DragonThe head does have an articulated jaw that is able to open. Gently apply force on the lower jaw until it breaks off of the head. The wings are able to rotate and flip.This is my first time creating a 3d model and an articulated model. This dragon is based off of Skully, which is from a dragon mobile game. I originally wanted to sell this for profit, but I didn't think about how complicated that process actually is. This model also felt a bit unpolished as well.I spent weeks making this model(mostly just trying to figure out how Blender works). Please feel free to share images of your prints. I would love to hear your feedback and see your remixes.Thank you.<h2>3D PRINTING SETTINGS</h2>Resolution: 0.15mmInfill: 15%Notes: I highly recommend using brim for this model. You might also want to consider using paint on supports for the wings to increase the chance of a successful print.&nbsp;&nbsp;The author of the model is <a target="_blank" href="https://cults3d.com/en/users/lcung26/3d-models" rel="nofollow noopener">https://cults3d.com/en/users/lcung26/3d-models</a>  Source : <a target="_blank" href="https://cults3d.com/en/3d-model/game/skeleton-dragon" rel="nofollow noopener">https://cults3d.com/en/3d-model/game/skeleton-dragon</a>

ARTICULATED SKELETON DRAGON

dragon

tomsky000

Want dynamic Mother&#39;s Day decorations? Here it is!&nbsp;All the models are separated and you can color them as you like!I have added two profiles, one with all parts on the same plate, and the other with two plates for two colors printing.I have shown both single and two color models in the photos, please choose according to your preference!&nbsp;If you are downloading a file to print yourself, please note the following 1. filp_text.stl need to add brim, but please do not add support. 2. filp_text_part2.stl need to add support.&nbsp;There is a little trick to installing the main body, please refer to the following illustration<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000448544/design/2024-04-30_23dea62a500b2.jpg">&nbsp;If you want the subject to rotate quickly, you can leave filp_text_part4.stl alone. As the gif shows Install two little hearts, you can use wind power to make it rotate, but the rotation speed is slow.&nbsp;Finally, I hope you enjoy and like it.

Spining flip text decor

b day

MottN.

OverviewThis is a wall mounted counter sign that uses customizable sign plates. The signs can be made with the MakerLab make my sign app. You can use some that I have uploaded or make your own - instructions for sizing are below.&nbsp;Unfortunately at this time this is not printable on the A1 Mini. I might make a scaled down version in the future.&nbsp;The sign features a face plate that holds two dials which can be turned from the left or right. Springs on both dials make turning snappy and keep the display indexed on a number.&nbsp;&nbsp;There are 3 hang points at the top.<img src="https://makerworld.bblmw.com/makerworld/draft/238906/2023-11-28_70a731e70ec85.png">&nbsp;Once Printed, snap pegs, springs, and respective dials into position.&nbsp;Parts PrintingPrint each plate of the included print profile, or print parts as below.&nbsp;1x of each dial. Apply a color change at height for the numbers, and I recommend fuzzy skin on the lower part of the dial so it is a little more grippy when turning.&nbsp;Face 1x - make sure and print with no supports.&nbsp;springs 2x. PLA is fine. PETG is good too but will be a little less stiff.&nbsp;Pegs 4x&nbsp;I put the small parts (springs and pegs) onto their own plate. You could print together with the bigger parts, but I wanted the pegs for mine to be white to match the sign backgrounds.&nbsp; Make Your Own SignsThis counter uses an upper and lower sign, make each as indicated.If you have a good idea for sign plates for use with this counter, Upload your signs as a remix to this file so other people can easily find them!&nbsp;&nbsp;Parameters:<ul><li>Dimensions<ul><li>Upper sign size: 200x50mm</li><li>Upper sign size: 200x100mm</li></ul></li><li>Keep default base plate thickness of 1mm</li><li>Select double holes on top<ul><li>Hole size 5mm</li></ul></li><li>Important! Do not change default corner radius.<ul><li>Corner radius changes the hole distance from the edge, so if this is anything other than 10mm, you sign holes will not line up with the pegs on the counter board.</li></ul></li></ul><img src="https://makerworld.bblmw.com/makerworld/draft/238906/2023-11-28_efbd46adf67a.png">&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Existing SignsI will update this to add signs as either print profiles or remixes.&nbsp;Powered by Make My Sign from MakerWorld(makerworld.com/makerlab/MakeMySign) :)&nbsp;Powered by Make My Sign from MakerWorld(makerworld.com/makerlab/MakeMySign) :)

Counter Sign, Customizable

sign

blecheimer

Thirsty, wastelander? Here, have a Nuka-Cola, fresh from before the war. What it costs, you ask? Nothin&#39;, this is on me. But if if you can spare a &#34;boost&#34; I will be as happy as a puppy with two tails. ;)&nbsp;Print your own Nuka-Cola bottle from Fallout in the great 2077 Space Age design! I designed it from the scratch according to some photos of an original bottle. The bottle is hollow and matches <a target="_blank" href="https://makerworld.com/en/models/436309" rel="nofollow noopener">my Nuka-Cola Bottle Cap</a>. You can easily press the cap on the bottle. Without the cap the bottle has a height of 178mm and can hold a volume of 380ml. I also added an optional label for the bottle that can be glue to one side. On the other side there is an embossed Nuka-Cola logo.Ready for an upgrade? <a target="_blank" href="https://makerworld.com/en/models/446415" rel="nofollow noopener">See my Nuka-Cola Quantum bottle.</a>&nbsp;Print preparation: Make sure that your print bed is clean and grease-free. An unsufficient bed adhesion is in most cases not a problem of the print profile but a cleanliness issue. If you want you can use glue on your print bed but for PLA this should not be necessary. Use the textured PEI plate and a bed temperature of 55-60°C. For the print quality it is important that you use a good and calibrated filament. Know your k-factor and use the correct flow setting. Bambu filament makes this step easier but any other quality brand will do the job.&nbsp;Print settings for the bottle: The bottle is an easy print. Use a 0.4mm nozzle, set the slicer to the 0.28 Extra Draft slicing profile and activate the spiral vase mode. The outer line thickness should be 0.8mm. Now you will get a robust, but hollow bottle. I like to reduce the outer wall speed a little bit to further improve quality. Be warned - the bottle is not meant to be waterproof. You can try to use concentric pattern and ironing for all surfaces. But if you really want a leak-free bottle you need to use clear coat or expoy on the inside to seal all pores.&nbsp;Print settings for the optional label: The optional label will take a long time to print. It is divided into two parts to make printing easier. An AMS is necessary because you need two colours. Use the 0.08mm Extra Fine slicing profile but change the layer height to 0.1mm. Set the wall generator to &#34;Arachne&#34; and reduce the outer wall speed to 100 mm/s. A small print tower will help to enhance the colour separation. After printing glue both halves to the empty frame on the bottle. I added the complete label to the raw model files if you want to try your own print settings.&nbsp;For more detailed print settings take a look at my print profiles. The print profiles can be used with A1, P1 and X1 printers.&nbsp;UPDATE 2024-04-22: User dplivingston proposed to print the label flat and use a heat gun to mold the label into the correct shape. I added a flat-label-STL to the download section if you want to try it.UPDATE 2024-04-24: User 3dlyx tried out the flat label (+ shape it with heat) and noticed that it is not wide enough. I modified the flat label so that it should now better fill-out the frame on the bottle. I guess, it is still not perfect…&nbsp;Nuka-Cola - containing 120% of the recommended daily allowance of sugar&nbsp;If you want to support me you can leave a tip at <a target="_blank" href="https://ko-fi.com/blecheimer" rel="nofollow noopener">ko-fi.com/blecheimer</a>.&nbsp;&nbsp;Disclaimer: This work by blecheimer is licensed under <a target="_blank" href="https://creativecommons.org/licenses/by-nc-nd/4.0/" rel="nofollow noopener">CC-BY-NC-ND 4.0</a>. The shown model is fanart and must not be used commercially. Copying this model to other 3D printing websites is not allowed without my permission.

Nuka-Cola Bottle (from Fallout)

fallout

CustomWorks

Print your own filament with these models. Print a Bi-Color, Tri-Color, Quad-Color, or even a Multi-Material Print. Idea brought to my attention by CNC Kitchen, who found out about it from Sunshine 3D, but this time with a decagon shape to make it more accurate, and designed to work perfectly with a 0.2mm nozzle and a 0.065mm layer height. If you have any ideas to make it better, please comment and I will see what I can do.

Filaments

filament

Scott-3d

V2 of the Iego heart keyring is now fully clipable! It is also actual Iego size and Iego compatible.&nbsp;Both keyrings clip together to form a heart and it is also good as a cute gift.&nbsp;To support my work please Boost and rate.

Iego brick heart keyring v2

m day

Elite St4lk3R

Designed to display my daughters Great Wolf Lodge Wand so it doesn't get lost or broken.

Great Wolf Lodge Wand Holder

great wolf lodge

wuguigui

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453302/design/2024-05-04_a0d7ac6b0ed2b.png"></figure>Updated 20240526Good news! Many people complained about the light leak issue of the shell printed by PLA-matte filaments. Now I designed a new LED holder that combined with a light hood, can prevent light leakage effectively, you just need to print the new LED holder part(LED Holder 3.1) to replace the old one, and then you can have a perfect light effect. Assembly Instructions and Print Profile updated as well. Thank you for your boosting and support.&nbsp;<img class="image_resized" style="width: 28.89%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453302/design/2024-05-16_1be03ab4152d8.jpg">  <img class="image_resized" style="width: 68.41%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453302/design/2024-05-16_41f71f4510a22.png">_________________________________________________________________________________________________________________&nbsp;Disclaimer: This model is part of the Creator Program, When you purchase the hardware kit through the links below, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to public.)&nbsp;This is a bird lamp designed for Bambu <a target="_blank" href="https://shrsl.com/4cxd4" rel="nofollow noopener">LED Lamp Kit 001</a>(This link is Bambu store Global area), you can buy it from the “Bill of Materials” at the bottom of the page if you are not from the “Global” area, it&#39;s available in the Bambu Store worldwide.Recommended filaments: Body: <a target="_blank" href="https://shareasale.com/r.cfm?b=2282157&amp;u=4048186&amp;m=138211&amp;urllink=store%2Ebambulab%2Ecom%2Fcollections%2Fpla%2D1%2Fproducts%2Fpla%2Dcf&amp;afftrack=" rel="nofollow noopener">BambuLab PLA-CF</a> (good at shading lights)or <a target="_blank" href="https://shrsl.com/4ikwx" rel="nofollow noopener">BambuLab PLA-matte</a>( Vivid colors), you can also try other <a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&amp;u=4048186&amp;m=138211&amp;urllink=&amp;afftrack=" rel="nofollow noopener">Bambu Filaments</a>; The Joint parts must use TPU, I&#39;m using <a target="_blank" href="https://shrsl.com/4ikxl" rel="nofollow noopener">BambuLab TPU95A HF </a>in this case.&nbsp;This model is original from my design in 2008(image below), at that time, it was hard for me to make it real in traditional ways, but now, I can do it with 3D printing:)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453302/design/2024-05-04_692cd59a4c53a.png"></figure>&nbsp;&nbsp;After 3 iterations and countless detail adjustments, I made this warm and lovely bird lamp finally. you can see some of the improvements in the images below.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453302/design/2024-05-04_8a26170e7d7c3.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453302/design/2024-05-04_cabfd389a6579.png"></figure>(Modify the structure of the lamp holder to optimize the lighting effect)&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453302/design/2024-05-04_53533acc1c079.png"></figure>(Modify the switch structure to avoid the impact of the support surface blocking switch travel, and covering the support surface)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453302/design/2024-05-04_4b67e9ef7b456.png"></figure>(Elevate the overall height to achieve a more balanced proportion of the design)&nbsp;&nbsp;Assembly Instructions:The TPU Joint parts recommended printing infill is 80% to make it sturdy.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453302/design/2024-05-04_7c92045833874.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453302/design/2024-05-04_a2021883eca63.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453302/design/2024-05-16_a112b862464b6.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453302/design/2024-05-04_1b3da20114f37.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453302/design/2024-05-04_9395ee623ba7d.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453302/design/2024-05-04_35eb5b7a86a6d.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453302/design/2024-05-04_116a076e29c28.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453302/design/2024-05-04_66f9e884f14da.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453302/design/2024-05-04_7b18e01916684.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453302/design/2024-05-04_2a79546f30a43.png"></figure>Click &#34;Like&#34; if you like it, feel free to boost me or <a target="_blank" href="https://paypal.me/wuguigui?country.x=C2&amp;locale.x=zh_XC" rel="nofollow noopener">buy me a cup of coffee</a>, thank you! Have fun!Watch the video to get more information:&nbsp;

Bird Lamp

lamp

3D Prints This Week

Load brown, white, and black into the ams. It says 4 colors so if you want to have the text a different color, you have that option. I just sent the text color to black as well to keep it simple. &nbsp;If you like the way it comes out, give me a boost, feel free to drop a tip in the link below, or a 5 star review always helps too.&nbsp;https://www.buymeacoffee.com/3dprintsth3

Funny Dog Coaster / Doctor / Vet / Coffee

animal

JustinHirsh

This model was ported directly from the game, modified by me, and spray painted.

Fortnite Chapter 5 Medallions 

fortnite

maxerek

Are you looking for a 3D model of animal Batman cat mask that can be used by CATS and for plushes like FOX? If so, you will love this 3D model of animal Batman cat mask! This model is a cute and cozy version of the Dark Knight and the furry feline.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000195211/design/2024-05-08_8a86e5c7bbd8a.png"></figure>If you like the model please boost my work by clicking rocket icon, it will help me develop better models for you!   Prints with slim tree support for nice quality.Please leave a photo of yor cat :)And 5* rating ;)Thank you!<figure class="image image_resized" style="width:22.78%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000195211/design/2024-02-20_f2f5f0d33bcef.jpg"></figure>&nbsp;Please also check my other uploads, they are worth it! :Bender Bending Rodríguez <a target="_blank" href="https://makerworld.com/en/models/214793" rel="nofollow noopener">https://makerworld.com/en/models/214793</a><figure class="image image_resized" style="width:28.8%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000195211/design/2024-02-29_11cbb6073d2758.jpg"></figure>Kintetic hinge fidget toy <a target="_blank" href="https://makerworld.com/en/models/187159" rel="nofollow noopener">https://makerworld.com/en/models/187159</a> <figure class="image image_resized" style="width:29.21%;"><a href="https://makerworld.com/en/models/187159" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000195211/design/2024-02-27_ef6dceec3db88.gif"></a></figure>Enderman with movable joints <a target="_blank" href="https://makerworld.com/en/models/185770" rel="nofollow noopener">https://makerworld.com/en/models/185770</a>

Bat-cat Batman cat mask and fox

props

Int-gineering

Rotate the top half of the pyramid until all the layers reach their maximum, this allows the top to be taken off, revealing the “vault” hidden inside. Super easy to print and assemble with nothing that isn’t 3D printed and rotates satisfyingly into place.This project is inspired by Bero, here is a link to their hidden pyramid storage:<a target="_blank" href="https://makerworld.com/en/models/225534#profileId-243393" rel="nofollow noopener">https://makerworld.com/en/models/225534#profileId-243393</a>My design and implementation differs a lot in the rotation and storage aspects.For people who wants a smaller pyramid, a second pyramid bottom STL is inlucced, which removes the bottom 8mm. The included print profile is for the full-size pyramid.Sadly I didn’t have any good filament color for the pyramid itself, so that’s why it is gray, but It still looks cool.&nbsp;Recommended settings are 0,12mm layer height at high quality with brim enabled for the best possible results.&nbsp;Printables:<ul><li>final_stepv5 (layer 7)</li><li>sixth_stepv5 (layer 6)</li><li>fith_stepv5 (layer 5)</li><li>fourth_stepv5 (layer 4)</li><li>third_stepv5 (layer 3)</li><li>second_stepv5 (layer 2)</li><li>first_stepv5 (layer 1)</li><li>key_part_1</li><li>key_part_2</li><li>Pyramid_bottom: (1 of)<ul><li>_full_size</li><li>_small</li></ul></li></ul>&nbsp;Assembly:<ol><li>Press fit layer 2 onto layer 1.</li><li>Insert key_part_1 into the square hole in the middle of layer 2, press until it is below the level of the circular cutout.</li><li>Press fit layer 3 onto layer 2.</li><li>Press fit layer 4 onto layer 3.</li><li>Press fit layer 5 onto layer 4.</li><li>Press fit layer 6 onto layer 5</li><li>press fit layer 7 onto layer 6. (you have now assemble to top half of the pyramid!)</li><li>Insert the key_part_2 into the hole in the key_part_1</li><li>Rotate the pyramid to either the spiral configuration or the standard straight configuration. (depending on which configuration you want to open the pyramid with) </li><li>Place the top half of the pyramid on top of the pyramid_bottom.</li><li>Turn the top half to “lock” the pyramid.</li></ol>&nbsp;If you want a specific orientation to unlock the pyramid (ie. Not straight on or spiral) , you change the angle in key_part_1 to something that will make it match your wanted orientation, there is an included stepfile for that purpose. &nbsp;&nbsp;

Pyramid spiral vault

vault

Craft Corner

this is a model fully 3d printed flare gun. it has a working hammer and trigger to be more realistic. if you have any questions leave a comment, thanks for downloading! this has been fixed with a better trigger spring an a better barrel

Fully printed Flare gun with working hammer(Fixed)

This & That

<a target="_blank" href="https://ko-fi.com/otvdev" rel="nofollow noopener">If you like my work and would like to support me, please consider supporting me on my Ko-fi :) (https://ko-fi.com/otvdev)</a>&nbsp;<figure class="image image_resized" style="width: 42%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000414275/design/2024-04-04_66af8441f4099.png"></figure>Ever wanted your own, tiny Heavy Duty Super-Colliding Super Button to push and fidget around with? Look no further!This miniature takes advantage of a single Cherry MX-compatible switch to let you click to your heart&#39;s content.<figure class="image image_resized" style="width: 24.38%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000414275/design/2024-04-04_bc76012bf24d1.gif"></figure>Prints and Colors Needed:[Non-AMS] [1] base - Black[4] bezels - White[1] button - Red [With AMS][1] base - Black, White, Gray[1] Button - Red Other Stuff Needed:[1] Cherry MX-compatible mechanical switch(If not using AMS) A small amount of glue Assembly Instructions:(If not using AMS) Glue each bezel piece into its slots on the base (use pictures for guidance if needed).Snap your preferred Cherry MX-compatible switch into the hole in the center. Slide the button onto the switch and enjoy your new fidget!(If you want to make it extra pretty, make sure the seam of the button aligns with the seam of the base!) ----------------------------------------- Enjoy your new fidget!

Mini Portal Button Fidget Toy

portal

movie

Sakul

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/253375/2023-12-10_fe2ad09a42fbd.gif"></figure>&nbsp;Replica of Sokka's meteoroid Sword from Avatar the last Airbender.This is a full size prop with place for a metal bar through the hole lenght.

Sokka Meteoroid Sword Avatar the Last Airbender

avatar

CubicMakers|立方造物

<h2> </h2><h2>Assemble succulents|拼装多肉</h2>Try growing 3D printed plants in your office or home. Give as a gift to family and friends. Bringing a touch of spring!尝试在您的办公室与家里养殖3d打印的植物吧，作为礼物送给家人与朋友，带来一丝春日的气息！&nbsp;Contains a cute cactus and a clump plant assembled model. No ams system, no support, no glue, just splicing! Some details can be flexibly assembled and changed.包含一颗可爱的仙人掌与一颗丛生多肉的拼装模型。无需ams系统，无需支撑，无需胶水，完全依靠拼接！部分细节可以灵活的拼装改变。<figure class="image image_resized" style="width:43.95%;"><img src="https://makerworld.bblmw.com/makerworld/draft/858030/2024-04-14_cd9e9d61b51b6.jpg"></figure><figure class="image image_resized" style="width:42.92%;"><img src="https://makerworld.bblmw.com/makerworld/draft/858030/2024-04-14_e7c2c94644e27.jpg"></figure><ul><li>The flowerpot is designed with holes so that real succulents can be planted.</li><li>花盆设计了孔洞，也可以种植正真的多肉植物。</li></ul><figure class="image image_resized" style="width:44.79%;"><img src="https://makerworld.bblmw.com/makerworld/draft/858030/2024-04-14_8767b6400430b.jpg"></figure><figure class="image image_resized" style="width:45.74%;"><img src="https://makerworld.bblmw.com/makerworld/draft/858030/2024-04-14_5036e148e8f0e.jpg"></figure><ul><li>The connection between the soil and the flowerpot uses elastic buckle designs on all sides. When the 3D printed soil is not loaded, it will not affect the cultivation of real succulents. (Ignore the soil color in this photo)</li><li>土壤与花盆的连接，四面使用弹性的卡扣设计，不装入3d打印的土壤时亦不影响养真正的多肉。（忽略这张照片的土壤颜色）</li></ul><figure class="image image_resized" style="width:47.74%;"><img src="https://makerworld.bblmw.com/makerworld/draft/858030/2024-04-14_d8cd8adee7fd2.jpg"></figure>&nbsp;<ul><li>The connection between soil and plants uses buckles or threaded connections. You can assemble any plants on top. It should be noted that the threads are placed vertically for printing convenience. The strength is limited and cannot be subjected to excessive force.</li><li>土壤与植物的连接使用卡扣或者螺纹连接，理论上你可以拼装任意的植物在上面。需要注意，螺纹为了方便打印是竖着摆放的，强度有限，不能受过大的力。</li></ul><figure class="image image_resized" style="width:47%;"><img src="https://makerworld.bblmw.com/makerworld/draft/858030/2024-04-14_5b0144b12d0b6.jpg"></figure><ul><li>The cactus and the clump plant main body are fixed using the screws mentioned above.</li><li>仙人掌与丛生多肉的主体都使用上面提到的螺丝固定。</li></ul><figure class="image image_resized" style="width:46.08%;"><img src="https://makerworld.bblmw.com/makerworld/draft/858030/2024-04-14_79981de68c573.jpg"></figure><ul><li>The decorative cactus flowers are also installed using small screws. The screws and flowers are printed separately. After printing, assemble them together.</li><li>仙人掌的装饰花朵也使用小螺丝安装，螺丝与花朵是分开打印的，打印完再组装到一起。</li></ul><figure class="image image_resized" style="width:45.33%;"><img src="https://makerworld.bblmw.com/makerworld/draft/858030/2024-04-14_bc669e88281ec.jpg"></figure><ul><li>The red core at the top of the cactus is actually a screw. It is printed upside down. Flowers used to secure petitions. There are also limited holes between the flowers and the core.</li><li>仙人掌最上面的红色花芯其实是螺丝，是倒过来打印的，用来固定上方的花朵。花朵与花芯之间也有限位的孔。</li></ul><figure class="image image_resized" style="width:44.22%;"><img src="https://makerworld.bblmw.com/makerworld/draft/858030/2024-04-14_6c330affea319.jpg"></figure><ul><li>The connection between the main trunk and branches of the clump plant relies on buckles. Use the same clips for the branches and flower cores above. You can play as many sections as you want.</li><li>丛生多肉的主枝干与树枝之间的连接依靠卡扣，树枝与上面的花芯使用同样的卡扣，想拼几节都可以。</li></ul><figure class="image image_resized" style="width:47.75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/858030/2024-04-14_494461f672e9a.jpg"></figure><ul><li>In order to avoid supporting the printing, a small buckle is used between the branches and leaves. Just be careful when installing here.</li><li>树枝与树叶之间为了免支撑打印，利用了一个很小的卡扣，这里安装时小心一点就好。</li></ul><figure class="image image_resized" style="width:50.07%;"><img src="https://makerworld.bblmw.com/makerworld/draft/858030/2024-04-14_20779cee0cf79.jpg"></figure><ul><li>On top of the 3D printed soil, there are fake stones directly connected by threads, and vines and flowers connected by buckles. Can be freely matched.</li><li>3d打印土壤之上有直接通过螺纹连接的假石头，与使用卡扣连接的藤曼与花朵，可以自由搭配。</li></ul><figure class="image image_resized" style="width:50.65%;"><img src="https://makerworld.bblmw.com/makerworld/draft/858030/2024-04-14_6399cd9fe5662.jpg"></figure>&nbsp;

Assemble succulents|拼装多肉

office

Isew68

I created these bookmarks to try out the .2 nozzle.

Bookmarks

book

Moon-extinguisher

A fast to print tube to conjure up scary eyes in a hedge or under the stairs with a glow stick, sustainable because the used glow stick can be easily replaced. For better reflexion use a small paper behind the glow stick.

Scary eyes light glow stick

glow

aPyroDesign

&nbsp;&nbsp;This Fire Multicolor Animated Fidget Spinner is designed to be printed as a multicolor print using the AMS, but can be printed using layer swaps or just as one solid color.&nbsp;This fidget spinner is unlike a standard spinner. The shapes that are on the spinners are frames of animation. When you spin the spinner and view the spinner through a smartphone camera, the animations come to life. There are also two other ways to view the spinners. The instructions are below for the 3 different viewing methods.&nbsp;Smartphone Camera Instructions: Click <a target="_blank" href="https://spinnermation.com/pages/cell-phone-method" rel="nofollow noopener">HERE</a>&nbsp;Strobe Light App Instructions: Click <a target="_blank" href="https://spinnermation.com/pages/strobe-method" rel="nofollow noopener">HERE</a>&nbsp;Handheld viewer: Click <a target="_blank" href="https://spinnermation.com/pages/handheld-spinner-viewer" rel="nofollow noopener">HERE</a>&nbsp;&nbsp;You will need an r188 bearing for the spinner.Recommended bearings from Amazon: Click <a target="_blank" href="https://www.amazon.com/dp/B095GTJC1R?linkCode=ssc&amp;tag=onamztravi04a-20&amp;creativeASIN=B095GTJC1R&amp;asc_item-id=amzn1.ideas.1JB9SWU6KEPUY&amp;ref_=aip_sf_list_spv_ons_mixed_d_asin" rel="nofollow noopener">HERE</a>&nbsp;&nbsp;Files included:&nbsp;3MF file that is ready for AMS printing.&nbsp;Solid spinner File for filament swapping. (Optional)&nbsp;Separate layers for multicolor printing (optional. If Needed)&nbsp;Top and Bottom Cap files.&nbsp;Bearing Top Cap. This part is to lock in the bearing.&nbsp;Bearing top tool. This will make it easier to lock on the bearing top cap.&nbsp;&nbsp;Interested in selling my spinners?  Check out my Patreon for more info.  Click <a target="_blank" href="https://www.patreon.com/APD" rel="nofollow noopener">HERE</a>&nbsp;&nbsp;&nbsp;&nbsp;

Fire Multicolor Animated Fidget Spinner

spinner

PrintingSlicibility

<div><h1>Summary</h1><div>A much needed upgrade to a regular BIC pen. Take out the internals of your simple BIC pen and friction fit it into the top, leads to a much nicer looking and feeling pen case than your typical BIC pen. Cap slides easily on and off pen and no supports necessary for any of the parts. Plans to create a line of different Pen bodies on the way! All comments and criticisms more than welcome!</div></div>

Minimal Pen Body

TripleGWorkshop

This case is scaled to max MINI print size. It&#39;s chunky in the hand and not so easy to stuff in a pocket. Bic logo is painted for multicolor printing.Slips in easy but doesn&#39;t come out!Want to go EVEN BIGGER? Grab the “Even Harder to Steal Bic Case”:<a target="_blank" href="https://makerworld.com/en/models/408541#profileId-310484" rel="nofollow noopener">https://makerworld.com/en/models/408541#profileId-310484</a><figure class="image image_resized" style="width:86.47%;"><img src="https://makerworld.bblmw.com/makerworld/draft/801362/2024-04-02_dfdsf9b5creh.jpg"></figure><h3>Still usable!</h3><figure class="image image_resized" style="width:91.83%;"><img src="https://makerworld.bblmw.com/makerworld/draft/801362/2024-04-02_dkgh425am6xt.jpg"></figure>

Hard to Steal Bic Lighter Case

useless

BrewBoy

<h2>THE CRANKHAMMER - Multi-Shot Launcher</h2>AKA: Wheel Gun V1.5A step up from the Wheel Gun V1 with a few extra features and a visual overhaul.&nbsp;VIDEO: <a target="_blank" href="https://www.reddit.com/r/3Dprinting/s/ygPbrqrSmU" rel="nofollow noopener">https://www.reddit.com/r/3Dprinting/s/ygPbrqrSmU</a><h3>New Features: (Compared to the V1)</h3><ul><li>Side chargers for quicker & easier priming.</li><li>Magazine crank to help quickly cycle to the next round.</li><li>Reload/Ejection port cover.</li><li>Complete overhaul of the frame for a more modern look and a much more comfortable grip.</li><li>Slightly more optimized parts for some what easier printing.</li><li>More Powerful.</li></ul><h3>Parts List:</h3>Nuts & Bolts:5 x M3*6 bolt1 x M3*8 bolt2 x M3*12 bolt3 x M3*20 bolt4 x M3*25 bolt3 x M3 Nut&nbsp;Compression Springs:1 x OD: 10mm, WD: 0.8mm, Length: 55mm<a target="_blank" href="https://www.aliexpress.com/item/1005002523758634.html?aff_platform=true&aff_short_key=UneMJZVf&isdl=y&src=bing&pdp_npi=3%40dis%21CAD%211.49%211.49%21%21%211.88%21%21%40%2112000021005031078%21ppc%21%21&albch=shopping&acnt=135095331&isdl=y&albcp=412811419&albag=1311717734383599&slnk=&trgt=pla-4585581970548950&plac=&crea=81982433154568&netw=o&device=c&mtctp=e&utm_source=Bing&utm_medium=shopping&utm_campaign=PA_Bing_CA_PC_customlabel1&utm_content=customlable1%3D7&utm_term=aliexpress%20305mm%20spring&msclkid=91572ea3b6a41a4e20b94b3fbac2f23b" rel="nofollow noopener">305mm Compression Spring Wire Dia 0.3 0.4 0.5 0.6 0.7 0.8 1 - 5mm Outer Dia 3 3.5 4 4.5 5 5.5 6 7 8 10 12 - 60mm Length 305 mm (aliexpress.com)</a> - I use these ones and cut them down to length.3 x Pen Springs<ul><li>1 - Hammer Latch</li><li>1 - Cut in half for magazine latch</li><li>1 - Cut to 6 mm length for crank indexer</li></ul>Misc:1 x Elastic Band<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/669627/2024-03-09_c13ff6276b392.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/669627/2024-03-09_57261d66f794d.jpg"></figure>

The Crankhammer (Wheel Gun V1.5)

WF3Dprinting

Did you see the photoshoped Cybertruck Shoes Elon Musk was wearing? Now they are real and you can print them yourself!These are the all new "CYBERTRCK SHS".The model should fit for following sizes: US 9 to US 10 (EU 42 - 43) If you have bigger feet please just rescale the files. If you don't want to waste precious flex filament print a PLA test print first. :)You can see the overall size of the shoe on the drawing I made. I really recommend printing the shoe and the sole each in one separet print. Hence you'll need a printer with a bed with around 350 mm in one direction. There is one critical overhang in the shoe which needs appropriate cooling when printing with flex. But it can be done. Here is the final result:<figure class="media"></figure>Happy printing and showing of your shoes!

Cybertruck Shoes

shoe

Arnauz

remix from <a target="_blank" href="https://makerworld.com/fr/models/98858#profileId-112735" rel="nofollow noopener">https://makerworld.com/fr/models/98858#profileId-112735</a> now without support & print in place &nbsp;Introducing the NutellaLock 3D: The Ultimate Nutella Jar Security Solution!Are you tired of sharing your favorite Nutella jar only to find it mysteriously disappearing? Say goodbye to unauthorized Nutella consumption with our revolutionary NutellaLock 3D – the perfect blend of innovation and indulgence!Features:Custom Fit: The Nutella Jar Security System is meticulously designed to fit securely onto the jar lid, ensuring a snug and reliable connection.User-Friendly: The locking mechanism is user-friendly, allowing individuals of all ages to easily secure and unlock their Nutella jars without any hassle.Reusable: The 3D printed lock is made from durable materials, making it reusable and environmentally friendly. It can withstand multiple uses, providing a long-lasting solution for Nutella enthusiasts.Personalization: Users can personalize their Nutella Jar Security System with a variety of design options. Whether it's a unique pattern, a favorite quote, or a personal message, the 3D printing technology allows for endless customization possibilities.Easy Installation & Print in Place: No need for complex tools or instructions. The Nutella Jar Security System can be easily installed by anyone, adding an extra layer of excitement to the Nutella experience.Why wait? Protect your Nutella investment today with the NutellaLock 3D – because every dollop deserves to be enjoyed by you and you alone. A new level of Nutella security!

Nutella lock 3D no support & print in place

kitchen

Captain_May

This is a fully articulated skeleton from the Tinkercad website that i edited to fit my idea.

fully articulated skeleton

.2 mm nozzle

EhRabz

holes on the bottom side fit 1.75mm filament for easy alignment while gluing.

Reaver Karambit from VALORANT

knifr

Nikl04

Tired of peeling eggs? Crack it open with a perfect line!Print the model, add a rubber band and enjoy. Its print in place, so remove support and go.In german its called: Eiersollbruchstellenverursacher :)&nbsp;Print with high amount of walls and much infill, supports should come right off when you use PLA Support from Bambu or PETG as interface layer.

Egg Opener /Eierschalensollbruchstellenverursacher

kitchen gear

Renaar

What better way to dress up for Halloween than to be yourself ! With a geeky twist, become a Sims in real life !&nbsp;Filaments i used :<ul><li>for the headband : Fillamentum Crystal Clear PLA (extrafill)</li><li>For the crystal : Fillamentum Luminous Green PLA (extrafill)</li></ul>TIPS :&nbsp;For the crystal :The Luminous green filament is a bit translucid, so if you print the crystal with 2 walls and 0% infill, it will be the good mix between sturdiness and translucent effect. You can test with others filaments as well :) You can even test with others colors, like yellow or red ! (Adapt to your mood ;) )&nbsp;For the headband :I printed it with more walls and compact infill, to be more resistant. It fit well on my head (normal head of a normal human). You can adapt the size by rescaling the model (don’t forget to rescale the crystal too). Probably +/- 5% rescaling can be enough.&nbsp;Have fun, and be carefull if swimming pool doesn’t have ladder to get out of water !!!

Become a Sims ! - Crystal's Sims

halloween

A3Dprints

<h2>Funny Bathroom / Toilet Sign</h2>&nbsp;Printed facedown for texture plate. Simple sign to make you giggle!

Funny Bathroom / Toilet Sign

bathroom stuff

mystoopidstuff

Ever needed to get your stuff together, y&#39;know, get it all together and put it in a box, all your stuff, so it&#39;s all together? Well I did, so I made this thing. It&#39;s a Box For Stuff, which will hold twenty 1x1x6u <a target="_blank" href="https://gridfinity.xyz/catalog/" rel="nofollow noopener">Gridfinity </a>bins (all together).The files here have been updated to Version 2.1 with the following improvements:<ol><li>Improved label design with more robust pins. (v2.0)</li><li>Improved handle design (which should be easier to install) (v2.0)</li><li>Increased the hole diameter where the M3 SHCS install into the hinges (increase to 5.8mm) (v2.1)</li></ol>&nbsp;This requires the following hardware:(2) M3 x 12mm SHCS (these hold the latch “cleats” to the top of the case) (4) M3 x 20mm SHCS  (4) M3 x 25mm SHCS (2) M3 x 30mm SHCS (80) 6x2mm Cylinder Magnets - OPTIONAL (I used 6x3mm, which seem to work OK too) (SHCS = Socket Head Cap Screws)&nbsp;There are two versions of the base included, one is “plain” and the other has a groove for a TPU gasket. I printed the TPU gasket version and with A98 shore TPU (what I had around), and it will not be water tight. So I think the gasket is only going to be helpful with a much softer TPU (or possibly by filling the groove with soft silicone). I&#39;m open to suggestions on improving the gasket design, but I prefer it, and it does not cause any functional issues to use it (or not).&nbsp;If printing the gasket version of the base, I recommend that you test that your printer can run TPU without issues first.  The cap of a sharpie is the tool I use to press the TPU gasket into place.  The gasket is not symmetrical so make sure to verify the position before installing it  Start by pressing in the middle of the gasket along all 4 sides, then once it&#39;s set in position, press in the corners.  &nbsp;There are also two versions of the top, one is designed for an MMU/AMS and features the &#34;<a target="_blank" href="https://github.com/gridfinity-unofficial/logo" rel="nofollow noopener">Unofficial Gridfinity Logo</a>&#34; (or at least the best copy of it I could make of it, since the .svg&#39;s did not load correctly from github). The other version is, you guessed it, plain with no logo, for single color printers.&nbsp;Finally, there are three versions of the labels for the front of the case. The first is designed to be used with 12mm Brother P-Touch (or similar) labels. The second is a multi-color label using the “<a target="_blank" href="https://github.com/gridfinity-unofficial/logo" rel="nofollow noopener">Unofficial Gridfinity Logo</a>”. And finally, there is a plain label included, in case you want to use the slicer tools to add embossed text to it. I have a <a target="_blank" href="https://www.mystoopidstuff.com/bambu-spares-box-build-guide.html" rel="nofollow noopener">build guide on my blog </a>with some tips on assembly. The instructions are for a case with more features, but it shows how to assemble the latches and hinges.&nbsp;The parts will need to be oriented in the slicer, and are designed to print without supports. I recommend using gyroid infill, and <a target="_blank" href="https://all3dp.com/2/cura-arachne-superslicer-prusaslicer-explained/" rel="nofollow noopener">arachne</a> for the “wall generator”. Arachne is needed at least for the multicolor parts, which have some thinner lines that may not resolve well using the “classic” wall generator. Adaptive layer height may also help cut down on print time on the larger parts. The print settings I used are the OrcaSlicer defaults, with the following changes:&nbsp;Strength &gt; Infill &gt; Sparse Infill Pattern &gt; GyroidQuality &gt; Wall Generator &gt; ArachneOthers &gt; Bed Adhesion &gt; Brim Type &gt; Mouse EarIf using the top with the logo, I recommend disabling the prime tower, unless your bed has room for it:Others &gt; Prime Tower &gt; DisableThe STEP file will be included for easy remixing.&nbsp;Other stuff:If you need some bins for small parts, the following bins with covers are a good option to use with the Box For Stuff <a target="_blank" href="https://www.printables.com/model/710154-gridfinity-box-for-stuff-bfs-20-bin-version-20" rel="nofollow noopener">20 bin </a>and <a target="_blank" href="https://www.printables.com/model/719788-gridfinity-25-bin-box-for-stuff-version-20-unteste" rel="nofollow noopener">25 bin </a>cases (or other 6U tall cases):<ol><li><a target="_blank" href="https://makerworld.com/en/models/237116#profileId-253187" rel="nofollow noopener">1 compartment 2x1 (6U) bin with a magnet pickup tool</a></li><li><a target="_blank" href="https://makerworld.com/en/models/416342" rel="nofollow noopener">1x1, 1x2 (3 Compartment) and 1x4 (6Compartment) bins with lids (6U) - version 2.1</a></li><li><a target="_blank" href="https://makerworld.com/en/models/405008" rel="nofollow noopener">1x2, 1x3, 1x4 (6U and 12U) Lidded Bin for Stuff with Latch Version 2.0</a></li><li><a target="_blank" href="https://makerworld.com/en/models/405004" rel="nofollow noopener">2x2, 2x3, 2x4 (6U and 12U) Lidded Bin for Stuff with Latch Version 2.0</a></li><li><a target="_blank" href="https://makerworld.com/en/models/405013" rel="nofollow noopener">3x3, 3x4 (6U and 12U) Lidded Bin for Stuff with Latch Version 2.0</a></li></ol>If you want to check out my other Gridfinity cases, you can find them at the links below:<ol><li>Gridfinity Box For Stuff <a target="_blank" href="https://makerworld.com/en/models/159840#profileId-266789" rel="nofollow noopener">20 bin (6U)</a></li><li>Gridfinity Box For Stuff <a target="_blank" href="https://www.printables.com/model/719788-gridfinity-25-bin-box-for-stuff-version-20-unteste" rel="nofollow noopener">25 bin (6U)</a> (max size for a Bambu X1C/P1S)</li><li>Gridfinity Box For Stuff <a target="_blank" href="https://makerworld.com/en/models/386034#profileId-286398" rel="nofollow noopener">16 bin (6U)</a> (Ender 3 size)</li><li>Gridfinity Box For Stuff <a target="_blank" href="https://makerworld.com/en/models/386041#profileId-286401" rel="nofollow noopener">16 bin - 12U deep version</a> (Ender 3 size)</li><li>Gridfinity Box For Stuff <a target="_blank" href="https://makerworld.com/en/models/389651" rel="nofollow noopener">2 bin (6U)</a> (small test version)</li></ol>Additionally, there are some <a target="_blank" href="https://makerworld.com/en/models/388742" rel="nofollow noopener">alternate latch parts</a>, which may help if you do not have the M3x30mm screws or have difficulty installing the latch “cleat”.&nbsp;If you want to store some metric hardware in this, <a target="_blank" href="https://www.printables.com/@Ch3vr0n_247401" rel="nofollow noopener">Ch3vr0n</a> posted some segmented bins for the Gridfinity system here:<a target="_blank" href="https://www.printables.com/model/732655-gridfinity-boxes-for-gridfinity-box-for-stuff-20-b" rel="nofollow noopener">https://www.printables.com/model/732655-gridfinity-boxes-for-gridfinity-box-for-stuff-20-b</a> If you find these models useful, please post a like or a comment with some pics of your prints. You can find the other things I&#39;m working on at my blog <a target="_blank" href="https://www.mystoopidstuff.com/blog" rel="nofollow noopener">here</a>.  You can also follow me here or on Printables, to see what new stuff I post.  If you would like to support my work, you can Buy Me A Coffee using this link:&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/mystoopidstuff" rel="nofollow noopener">https://www.buymeacoffee.com/mystoopidstuff</a>&nbsp;Thanks for looking!&nbsp;&nbsp;UPDATE 20 Jan 2024: Thanks to some helpful feedback, the files here have been updated to the version 2.0 design, which will help with assembly. The images included here are of the V1.0 design (which is cosmetically very similar to the V2.0 design).&nbsp;Update 2/10/2024: I had two reports that installing the M3 SHCS would crack the hinge on the V2 models. The problem seemed to be related to slightly different size screw head diameters between M3 screws (I have measured between 4.9-5.6mm diameters). To address that problem, I&#39;ve updated the files here to Version 2.1, which has a bit more clearance for larger M3 SHCS heads (the pockets are 5.8mm diameter). Update 2/12/2024: I missed updating the bottom of the box with the gasket with the v2.1 model. That was just updated so the models should all be at the version 2.1 level now.

Gridfinity Box For Stuff (BFS) - 20 BIN Ver 2.1

gridfinity

Diggle

Best of both worlds of slim can while still be able to use normal size cup holder!&nbsp;Recommend to print is PETG, ABS, or ASA if it will be sitting if your hot car this summer!

Slim Can Cup Holder Adapter

car stuff

Alberto panzer

Canister for filament purge, every time the printer discharges the purge will make a point.&nbsp;Recommended the use of AMS, simple and quick to achieve.&nbsp;I recommend lightly sanding the inside of the holes for better assembly, attention to the network because very weak.

Purge Basket

filament qaste

Dr Operator

UPDATE 2/15/24: The <a target="_blank" href="https://makerworld.com/en/models/183898#profileId-202793" rel="nofollow noopener">BLT upgrade</a> for Sliced Bread is now available.<figure class="image image_resized" style="width:30.88%;"><img src="https://makerworld.bblmw.com/makerworld/draft/557704/2024-02-15_c758983e6e179.jpg"></figure>&nbsp;&nbsp;&nbsp;&nbsp;This is my first upload to MakerWorld, I hope I have everything uploaded properly. Having recently bought an A1 with the AMS, I decided to update one of my Transformer designs. Sliced Bread is an update/remix of my <a target="_blank" href="https://www.printables.com/model/399650-transformers-ham-and-cheese" rel="nofollow noopener">Ham and Cheese</a> design. I've updated the shoulder and hips joints, changed the logo to a Docobot logo as well as changing the overall design to require either a multi colour printer or painting skills.&nbsp;An assembly guide is on the way. The design uses eight 5mm x 3mm magnets that are completely optional. They just help it keep it's shape when in bread mode.&nbsp;Also pictured is my Transformer design <a target="_blank" href="https://www.printables.com/model/423293-transformers-a-toaster-named-crumbs" rel="nofollow noopener">A toaster named Crumbs</a> which Sliced Bread is designed to fit into. If you'd like to check out my other Transformer designs, you can find them all on my <a target="_blank" href="https://www.printables.com/@DrOperator/models" rel="nofollow noopener">Printables profile</a> Docobots (Dock-Oh-bots) are a faction of former Autobots and Decepticons who have no interest in fighting a never ending war and just want to live in peace. On the run from both the Autobots and Decepticons, they turn to their namesake Dr. Operator to help alter their transformed state from the usual Car/Plane/vehicle into everyday objects to help them avoid detection. ASSEMBLY GUIDE <figure class="image image_resized" style="width:56.47%;"><img src="https://makerworld.bblmw.com/makerworld/draft/557704/2024-02-02_fcdc191da6f5b.png"></figure>&nbsp;Assembly isn't too difficult and should only take a couple minutes. There is no hardware necessary for assembly but there is the option to use eight 5mm x 3mm magnets to help keep it's form while in bread mode. First off, you will need two Pins and one Leg, Thigh and Joint as seen below. <figure class="image image_resized" style="width:43.86%;"><img src="https://makerworld.bblmw.com/makerworld/draft/557704/2024-02-02_d38cab2ca554b8.png"></figure>&nbsp;Take the Joint, slide it into the Thigh and insert the Pin. Then take the Thigh, insert it into the Leg and insert the Pin. Repeat the steps for the second Leg and put them off to the side for a moment. <figure class="image image_resized" style="width:93.38%;"><img src="https://makerworld.bblmw.com/makerworld/draft/557704/2024-02-02_58b2b46deb8fc.png"></figure>&nbsp;&nbsp;&nbsp;&nbsp;Next, you will need one Joint, Arm 1, Arm 2 and Hand. <figure class="image image_resized" style="width:38.25%;"><img src="https://makerworld.bblmw.com/makerworld/draft/557704/2024-02-02_2f76f4b41e26b8.png"></figure> Place the Hand and Joint into Arm 2 and then attach Arm 1 as seen below. Repeat the steps for the second arm and then set them aside. <figure class="image image_resized" style="width:89.16%;"><img src="https://makerworld.bblmw.com/makerworld/draft/557704/2024-02-02_07617c09de6198.png"></figure>&nbsp;&nbsp;&nbsp;Next, we're going to attach the legs and head to the chest. You'll need Chest 1, Chest 2, Head and the two assembled legs.<figure class="image image_resized" style="width:61.18%;"><img src="https://makerworld.bblmw.com/makerworld/draft/557704/2024-02-02_dfe2a4c3b7e4d.png"></figure>&nbsp;&nbsp;Place the legs and head onto the tracks on Chest 2 and then attach Chest 1 as seen below. I would suggest using a drop of glue on each of the three pegs on Chest 2 before attaching Chest 1. The fit is snug enough already, but I used glue on mine to increase durability. <figure class="image image_resized" style="width:87.59%;"><img src="https://makerworld.bblmw.com/makerworld/draft/557704/2024-02-02_46860bd6a92358.png"></figure>&nbsp;&nbsp;&nbsp;&nbsp;Grab the two completed arms and the last two pins.<figure class="image image_resized" style="width:54.96%;"><img src="https://makerworld.bblmw.com/makerworld/draft/557704/2024-02-02_9114f38a1e2de8.png"></figure>&nbsp;&nbsp;&nbsp;&nbsp;Attach the arms to the body using the pins and we're just about done. <figure class="image image_resized" style="width:82.72%;"><img src="https://makerworld.bblmw.com/makerworld/draft/557704/2024-02-02_6863dd847f63b.png"></figure>&nbsp;&nbsp;&nbsp;&nbsp;Last thing to do is attach Head 2 using the Head Pin and you're good to go.&nbsp;<figure class="image image_resized" style="width:88.79%;"><img src="https://makerworld.bblmw.com/makerworld/draft/557704/2024-02-02_62c5ac6b0b0298.png"></figure>&nbsp;&nbsp;

G1 Docobot: Sliced Bread

robots 🤖 

It's been quite some time since I've remixed a <a target="_blank" href="https://makerworld.com/en/@soozafone" rel="nofollow noopener">Lucky 13 toys</a> model. Soundwave is a character that I originally wanted to remix for Lucky 13 but I always seemed to have something else on the go, so I'm happy to have finally found time for it.&nbsp;&nbsp;&nbsp;NOTES:<ul><li>This model remixes the Dummy 13 armour only. You will still need to download and print a <a target="_blank" href="https://makerworld.com/en/models/183780#profileId-202639" rel="nofollow noopener">Dummy 13</a> frame.</li><li>In the profile, I had to use white as a colour because there was no option for translucent. I used translucent AMZ3D filament for Chest Door 2. The other filaments used were Bambu PLA tough Silver, Bambu PLA basic Gold, Bambu Matte PLA Marine Blue and Dark Red.</li><li>I haven't made any tapes for Soundwave yet, but I'll try and get some made soon.</li></ul>&nbsp;&nbsp;ASSEMBLY:&nbsp;You will need to download and print a full Dummy 13 frame plus two extra frame-abdomen-v6.stl. You need to add those extra abdomen parts to the shoulders as seen below. The picture on the left is a regular Dummy 13 frame and the picture on the right has the extra pieces added.<figure class="image image_resized" style="width:55.54%;"><img src="https://makerworld.bblmw.com/makerworld/draft/755462/2024-03-23_5d0c320ff4d408.png"></figure>&nbsp;&nbsp;Most of the Soundwave armour will assemble the same way regular Dummy 13 armour does, but there are just a few notes about the legs. Even though the leg plate fits snug onto the leg itself, I would still recommend using a bit of glue to help keep it on. The shin frame part will snap into place when inserted into the leg as seen below.<figure class="image image_resized" style="width:65%;"><img src="https://makerworld.bblmw.com/makerworld/draft/755462/2024-03-23_17ddc7c3b8c5f8.png"></figure>&nbsp;&nbsp;You will need to attach the knee to the thigh before attaching it to the shin.<figure class="image image_resized" style="width:45%;"><img src="https://makerworld.bblmw.com/makerworld/draft/755462/2024-03-23_2d42afd426ac8.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/755462/2024-03-23_ae9d678e19cd1.png"></figure>&nbsp;&nbsp;TRANSFORMING:&nbsp;Transforming Soundwave is pretty easy. Start by removing the gun and mic, and put them aside for right now. Turn the head around 180 degrees and fold it downwards as seen below.<figure class="image image_resized" style="width:58.64%;"><img src="https://makerworld.bblmw.com/makerworld/draft/755462/2024-03-23_af19ceb4422cc8.png"></figure>&nbsp;&nbsp;Next, fold the arms all the way back and curl the hands.<figure class="image image_resized" style="width:49.79%;"><img src="https://makerworld.bblmw.com/makerworld/draft/755462/2024-03-23_beabae059e4d98.jpg"></figure>&nbsp;&nbsp;Once you have the arms and the head sorted, turn the legs so that the silver panel is facing forward. You will notice that there is a peg on the leg and a hole in the side of the chest. That will help keep it's shape when transformed.<figure class="image image_resized" style="width:61.23%;"><img src="https://makerworld.bblmw.com/makerworld/draft/755462/2024-03-23_942a9e949a956.png"></figure>&nbsp;&nbsp;Once you have the legs in place, the last thing you will need to do is attach the gun and mic. The mic fits into the back of the left leg and the gun fits into the back of the right leg.<figure class="image image_resized" style="width:61.47%;"><img src="https://makerworld.bblmw.com/makerworld/draft/755462/2024-03-23_3345fef53ddd58.png"></figure>

Dummy 13 skin: Soundwave

lucky/dummy/mini 13 stuff

Chubby Knot

NOTE: This print requires tight tolerances. If your printer struggles with moving parts at 0.15mm clearance, use the low tolerance model.&nbsp;This simple yet overengineered chess board doubles as a very rugged carrying case. The handle and two pieces connect using two dovetail joints. Bottom layers to be printed in two colours. Prints easily without supports. Each square showcases octagram spiral surface pattern but I would also recommend archimedean chords.

Portable Chess Board Box

travel

Bedside RulerKeep this handy ruler by your bed to make any… measurements you need!&nbsp;Print with multicolor to get the notches and numbers on top. &nbsp;(Note, this ruler is not accurate, it is a joke and is designed to not look like a real ruler)

Bedside Ruler ;)

April fools

Sebazzz

Print at 0.2mm layer height, 5% infill, two walls.

Keycap puller remix - thinner arms

keyboard

f1dude

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/849893/2024-04-01_ee5e47fe6f32c.jpeg"></figure><h2> </h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/849893/2024-04-01_ca7b88bdfda8.gif"></figure><h2> </h2><h2>The filament clip reinvented!</h2><h2>Advantages:</h2><h3>- The CLAW clip is the fastest and easiest universal clip to use. Thanks to its clamping mechanism, it effortlessly grabs onto the support filament loop and keeps a tight grip.</h3><h3>- An innovative design that allows it to be used on completely full and empty spools.</h3><h3>-Fast and Easy to print. No supports, brims, or overhangs.</h3><h3> </h3><h2>Version 2</h2><h2>I&#39;ve modified the hole to be a square now so the chances of a hole blockage are reduced.</h2>&nbsp;<h3>Improved SLICER settings:</h3><h3>“Seam position” set to “Nearest,” so back-to-back seams do not drip and block the clip holes.</h3><h3>“Order of walls” set to &#34;outer/inner&#34; so the extruder prints other areas of the clip before printing the hole perimeter. I&#39;ve found that this setting stops the holes from being blocked by overextruded material.</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/849893/2024-04-08_c57869487c2fb8.jpg"></figure>&nbsp;<h2>THANKS FOR PRINTING!!!</h2>

Filament Clip

filiment spool accesories 

Brian Dean

<h2>Embedded Magnet Dispenser Tool for Multiple Diameters and Thicknesses</h2><h3>PROFILE NOTE</h3>Please use the “Designer” profile as it guarantees the latest files and version with all new magnet sizes and features. The Designer Profile will be listed at the top.<h3>Latest Update (2024-04-21): Quick summary</h3><ol><li>additional magnet sizes</li><li>magnet size text embossed on the barrel and also included on the slider</li></ol>See below for the more detailed update notes.<h2>Magnet Dispenser for 3D Prints: Simplify Magnet Insertion with Precision</h2>The Magnet Dispenser Tool is expertly designed to streamline the insertion of magnets into 3D prints. This tool not only speeds the process of inserting magnets into 3D Prints, it also ensures correct orientation and secure fitting, making it ideal for projects that require precise magnet placement.<h3>Key Features</h3><h4>Dual Dispensers for Perfect Alignment</h4><ul><li>Includes two dispensers for each magnet size – one for north-up and one for south-up orientations</li><li>Use different colors (e.g., red for north-up and blue for south-up) to help easily identify the dispenser&#39;s orientation</li><li>Eliminates the hassle of misaligned magnets</li></ul><h4>Design and Utility</h4><ul><li>Developed after extensive refinement</li><li>Allows for friction-fit insertion and is also suitable for magnets that are glued</li><li>Tapered tip facilitates use in tight spaces</li></ul><h4>Ease of Use</h4><ul><li>The dispensers are designed to accommodate the specified magnet sizes for their internal holding magnets, but can dispense magnets of any thicknesses for the specified diameter. For example, for the 6x3mm dispenser, you will need 6x3mm magnets to assemble the dispenser, but once assembled, that dispenser can dispense any 6mm diameter magnet such as 6x1, 6x2, 6x3, 6x5, etc.</li></ul><h4>Convenience and Storage</h4><ul><li>Features a snap-on cap with an embedded magnet and a top slider magnet</li><li>Ensures secure storage and prevents accidental magnet spillage</li></ul><h4>Customization and Printability</h4><ul><li>No supports needed for printing</li><li>STL and STEP files included for personal customization</li><li>Compatible with PETG, PLA, ASA, ABS, etc</li><li>Adjust x/y hole compensation if needed for perfect fit</li></ul><h4>Visual Guide</h4><ul><li>Fusion 360 images provided for easy assembly and understanding of the internal mechanism</li></ul><h4>Use the Magnet Dispenser for a hassle-free, precise, and efficient magnet insertion experience in your 3D printing projects.</h4><h3>Supported Magnet Sizes</h3><h4>Dispensers are now provided for the following magnet sizes as of Version 5</h4><ol><li>2x1mm</li><li>2x2mm</li><li>2x3mm</li><li>3x1mm</li><li>3x2mm</li><li>3x3mm</li><li>4x1mm</li><li>4x2mm</li><li>4x3mm</li><li>5x1mm</li><li>5x2mm</li><li>5x3mm</li><li>6x2mm</li><li>6x3mm</li><li>7x2mm</li><li>7x3mm</li><li>8x2mm</li><li>8x3mm</li><li>8x4mm</li><li>9x2mm</li><li>9x3mm</li><li>10x1mm</li><li>10x2mm</li><li>10x3mm</li><li>12x2mm</li><li>12x3mm</li><li>15x2mm</li><li>15x3mm</li><li>20x2mm</li><li>20x3mm</li></ol>NOTE 1: The 1mm magnet thickesses are just too thin to work reliably with the friction-fit of the slider and caps. Therefore, I have made the pockets of the “1mm” thickness magnet dispensers to be that of the 3mm variety so that they work. So to assemble a 1mm magnet thickness dispenser, you will need to purchase a few 3mm thick magnets to assemble the dispenser. A 2mm thickness will likely work ok, too. Note that the text on the dispenser will still say “D x 1 mm” for the barrel, “Dx1” on the cap, and “D/1” on the slider, so you know what magnets you have loaded into it.&nbsp;NOTE 2: the above are the sizes needed to assemble the dispenser. The dispenser can still dispense any thickness of magnet as long as the diameter is the same. So if don&#39;t see your specific magnet thickness listed above, you can still print the correct diameter, assemble the dispenser with the correct magnet thickness, and dispense other thicknesses.&nbsp;STEP and STL raw files are included if you do not wish to use the provided profile.<h3>Quality Assurance Testing</h3><ul><li>All dispenser sizes have been printed by me and extensively tested</li><li>I have purchased all magnet sizes at significant expense to myself to ensure fit</li><li>Magnet diameters are tricky for press-fit tolerance and controlled by no less that 5 Fusion 360 parameters that must be balanced to achieve good fit<ul><li>Multiple iterations of each dispenser were printed and refined</li><li>Many kilograms of filament and hundreds of hours of print-time were consumed during this process</li><li>All to ensure the best quality printing and fit-up for each dispenser size</li></ul></li></ul><h3>About the Profiles</h3><ol><li>Please use the “Designer” profile as it guarantees the latest files and version with all new magnet sizes and features. The Designer Profile will be listed at the top.</li><li>NOTE: The “Designer” profile is a single profile that contains plates for all magnet sizes so far. Please ignore the “total time” reported by MakerWorld for the profile. You only need to print the plate(s) that you need. Each plate takes about 2.5-2.9 hours on my X1C using the included “PETG” profile which is slowed down for good PETG layer adhesion and quality.</li><li>While the other profiles may be ok, their file / update version may be out of date. So if you want the latest sizes and model improvements, please choose the top “Designer” profile.</li></ol><h3>Accessories</h3>Be sure and check out some nice accessories that other folks have created to work with these dispensers.<ul><li>Tip Caps - these are nice caps for the dispensor tip. Not only do they help keep the magnets contained within, but they also protect the tip. Additionally, they are labeled with the magnet size, which is nice. Thank you @onegotowned ! <a target="_blank" href="https://makerworld.com/en/models/149038#profileId-162633" rel="nofollow noopener">https://makerworld.com/en/models/149038#profileId-162633</a></li><li>Vertical Workbench Stand - This is a very nice stand for select diamagers made by @nickramsey57. A number of folks have asked about stands / organizers for the dispensers, so this model will likely be useful to a number of folks. Thank you @nickramsey57 ! <a target="_blank" href="https://makerworld.com/en/models/206388#profileId-226561" rel="nofollow noopener">https://makerworld.com/en/models/206388#profileId-226561</a></li><li>Vertical Workbench Stand (parametric) - Here is another very nice stand made by @RevHazlett. You can specify the dispenser sizes that you want it to hold and then generate, making it customizable to your needs and the common magnet sizes that you use. Thank you @RevHazlett! <a target="_blank" href="https://makerworld.com/en/models/435087#profileId-340031" rel="nofollow noopener">https://makerworld.com/en/models/435087#profileId-340031</a></li></ul><h2>Update History</h2><h3>Version 5: 2024-04-21</h3><ol><li>Emboss the magnet size text on the Barrel (see photos), allowing one to view the size from the side, and also allowing one to print all of the barrels on a single plate and not get the barrels mixed up as to what size they are for.</li><li>Include the magnet size text on the Slider (see photos), allowing one to print all of the sliders and caps together on one plate and not get the sliders mixed up as to what magnet size they are for. Also provides additional text identification of the magnet size within.</li><li>Include 11 new magnet sizes:<ol><li>3x1mm</li><li>4x1mm</li><li>5x1mm</li><li>7x2mm, 7x3mm</li><li>8x4mm</li><li>10x1mm</li><li>15x2mm, 15x3mm</li><li>20x2mm, 20x3mm</li></ol></li><li>Re-organize the plates so that they are a little easier to manage. All dispenser sizes for each “diameter” are spread across three plates now - the Barrels, the Red Caps and Sliders, and the Blue Caps and Sliders. This allows one to “print-by-layer” instead of “print-by-object”, and the text also comes out better. Additionally, it is now easier to construct a plate with all of the size variations on 3 individual plates and print them all at once.</li></ol><h3>Version 4: 2023-12-26</h3><ol><li>Fixed an issue where the smaller diameter magnets such as the 2mm, 3mm, and possibly the 4mm magnet diameters could inadvertently slip through the vertical barrel slider stem slot. Prior to this update, the slider stem was a fixed 3mm + tolerance width. With Version 4, the slider slot is now dynamic based on the magnet diameter. So now, the smaller diameter magnets are captive within the barrel and cannot slip out inadvertently.</li><li>Tighten up the tolerances between the “slider” and the “barrel” for a better fit and smoother operation.</li><li>Use the Profile: “Version 4: All Sizes …” for the latest from this update.</li></ol><h3>Version 3: 2023-12-22</h3><ol><li>Added additional magnet sizes<ol><li>2x1mm, 2x2mm, 2x3mm</li><li>9x2mm, 9x3mm</li></ol></li><li>Text is now added within the Fusion 360 Model File, eliminating the need to add the text using Bambu Studio<ol><li>Ensures consistent text placement and easier colorizing of the text</li></ol></li><li>All plates are included for all magnet sizes, two dispensers per plate, print sequence: print-by-object</li></ol><h3>Version 2.1: 2023-11-28</h3><ol><li>Added additional magnet sizes<ol><li>3x2mm</li><li>4x2mm, 4x3mm</li><li>5x2mm, 5x3mm</li><li>6x2mm</li><li>8x2mm, 8x3mm</li><li>10x2mm, 10x3mm</li><li>12x2mm</li></ol></li><li>The magnet size text is included on the cap for easy identification - see photo</li></ol><h3>Version 2: 2023-11-20</h3>Updated to “Version 2”. Significant updates an enhancements have been made, some seen, some unseen.<ol><li>Added additional magnet sizes<ol><li>3x3mm</li><li>12x3mm</li></ol></li><li>Each magnet size is on its own plate, two dispensers per plate, print sequence: print-by-object</li><li>Redesigned “thumb slider” for greater comfort and stronger press force</li><li>Slider stem has been reinforced</li><li>Many enhancements for smoother operation with internal chamfers and fillets, enhanced tolerances, and strengthening of key internal components</li></ol>&nbsp;&nbsp;&nbsp;

Embedded Magnet Dispenser Tool for 3D Prints

magnet stuff

austinawsomeify

I remixed this model for easy multi color printing. (old) I made the numbers a diff color then the top, but you can just change the filament settings if you want it the same.&nbsp;I released a new version with options for a numbered bottom and a slot for 5x4mm magnets. (new) &nbsp;I recommend printing the new profile. &nbsp;I used these: <a target="_blank" href="https://www.amazon.com/gp/product/B0BW8W1XP3/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1" rel="nofollow noopener">https://www.amazon.com/gp/product/B0BW8W1XP3/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1</a>

.45 Cal Dice and Revolver Cylinder Case

Ocean 3d Maker

quick test to test support configurations or test multi-material configurations at the support interface.

Support or interface Test

test prints

Delphant

<h3>Chain Chomp Bobble</h3><ul><li>Based on <a href="https://www.printables.com/social/106529-3d-printy/about" rel="nofollow">3D Printy's</a> bobble design for the bobblehead competition.</li><li>Fully compatible with 3D Printy's Springs and Base</li><li>Chain Chomp from Super Mario</li></ul><h4>Printing</h4><ul><li>Print the head in two colors for the first 12 layers (.2mm layer height)</li><li>Print the head with 5-10% infill gyroid so that it's not too heavy</li><li>I recommend printing the head with a large brim</li><li>Two DIFFERENT eyes, with two colors at layer 15 (Ironing helps here)</li></ul><h4>Assembly</h4><ul><li>All headpieces were designed to only fit in one way.</li><li>The eyes and mouth were designed with a tolerance for the chain chomp head, so they should fit in easily and be secured with super glue. </li><li>3D Printy's parts are snug so no glue is required.</li></ul><h4> </h4>

Chain Chomp Bobble

spring

KriswiffaK

I've PERFECTED this. &nbsp;&nbsp;Instructions: Stick somewhere, wait, lol

Fauxlet (Fake outlet)

pranks

PoussinJaune

The 3d printer on it is the bambu lab p1s and have 4 color to print with the bambu ams Maybe too big you can resize it on your slicer &nbsp;Use the 0.2 mm nozzle for little detail, enabled “detect thin wall” I put 0.06mm layer but its not necessary higher will take less time and filamentbut it lower the quality by much on side for 10% less filament and 5h&nbsp;If you want a p1p version, say it in comment X1 version on my profile

Warning sign bambu lab p1s

funny stuff

3DVJModels

Introducing the Figure 8 Tree Support Marble Run!If you’re looking for a challenge you have found the right place! But brace yourself, this print takes quite some time as it will fill your build plate. **Pictured model is scaled down to 47% for use with 6mm marbles CompatibilityThis marble run was modeled using a 15mm steel ball with the track trenches at 16mm. With that said, this model is completely scalable below 100% so you are free to resize to accommodate any marble size below 15mm! (If you have a large build plate you can go bigger!)Print SettingsI have attached a screenshot of the settings I used for supports in Bambu Studio (based from PrusaSlicer). With that said, you may need to adjust settings depending on your preferred slicer.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/123904/2023-10-27_jmdxkh0pwicz.png"></figure>*Edit (5/20/23)<ul><li>Top interface spacing can be set to 0.0mm to help strengthen support connections as they won’t be removed!</li><li>Max bridge Length will vary the support structure under the model, I recommend a 10mm or smaller depending on scale!</li></ul>*Important note: If you are having trouble generating support under the whole bottom side of the track, you may have to paint them on manually. This is easily done in Bambu Studio, not sure for other slicers.<ul><li>Layer Height: 0.2mm (Your preference)</li><li>Infill: 10-15% is perfect</li><li>Walls: 2 perimeters minimum</li><li>Bottom layers: Bump this up to 4-5 Layers</li><li>Scale Range 47%-100%</li></ul>&nbsp;Feel free to share your masterpiece!&nbsp;

Scaleable Tree Support Marble Run - Figure 8 Style

marble

Scratchplate3D

A small snack bar with various small containers that can be filled with various snacks or something else.

2024_Small Snack Bar

new years

B1g Dav3

I felt that the great work from @FuzzySpuffy needed some AMS/Colorization love. His attributions are very open in sharing - so I did so!

Halloween Door Corner Decor 1 v1

door stuff

DesignCraft

Build small or large scale models with these easy-to-print building blocks!&nbsp;Instructions:<ul><li>Print at 0.2mm with 0% infill.</li><li>Let your imagination run wild!</li></ul>Tips:<ul><li>Tolerances will vary between blocks and connectors depending on the filament used. I suggest printing the connectors with a few different filaments and finding ones that work best with different blocks.</li><li>The connectors were designed with grooves so you can use your fingernail to insert and remove from blocks.</li><li>Keep needle nose pliers on hand for tighter tolerances.</li><li>Every block does not need to connect to every other block. Create strips of blocks and then connect to another strip with just a few well-placed connectors.</li><li>You can also stack sections without the need for connectors. The pictured tower has about eight stacked sections which are not otherwise connected.</li></ul>Companion Collections:&nbsp;The following collections provide additional models within specific categories.<ul><li>Textured Slabs: <a target="_blank" href="https://makerworld.com/en/models/22333" rel="nofollow noopener">https://makerworld.com/en/models/22333</a></li><li>Windows &amp; Panes: <a target="_blank" href="https://makerworld.com/en/models/22331" rel="nofollow noopener">https://makerworld.com/en/models/22331</a></li><li>Doors: <a target="_blank" href="https://makerworld.com/en/models/22332" rel="nofollow noopener">https://makerworld.com/en/models/22332</a></li><li>Fences: <a target="_blank" href="https://makerworld.com/en/models/22330" rel="nofollow noopener">https://makerworld.com/en/models/22330</a></li></ul>Notes:<ul><li>DesignCraft is a placeholder name for this project. The name may change in the future!</li><li>The blocks used to make the pictured tower were all printed with PLA filaments.</li><li>No glue, adhesives, or anything like that were used to create the pictured tower!</li></ul>Credits:<ul><li>The build pictured was inspired by ItsMarloe&#39;s Amethyst Tower. However, I did take many of my own creative liberties! You can find his video here: <a target="_blank" href="https://www.youtube.com/watch?v=QI8hSyTASEc" rel="nofollow noopener">https://www.youtube.com/watch?v=QI8hSyTASEc</a></li><li>The Minecraft Spider model which appears in a couple of the images is by Steven786: <a target="_blank" href="https://www.printables.com/model/148963" rel="nofollow noopener">https://www.printables.com/model/148963</a></li><li>The stackable sorting trays I used to keep my blocks organized are by Mar Ber: <a target="_blank" href="https://www.printables.com/model/498070" rel="nofollow noopener">https://www.printables.com/model/498070</a></li><li>The organic catchall tray I used to hold my connectors is by lord_edel: <a target="_blank" href="https://www.printables.com/model/380742" rel="nofollow noopener">https://www.printables.com/model/380742</a></li></ul>

DesignCraft Building Blocks inspired by Minecraft

designcraft

9percent

Four-in-a-row game played with the numbers 2,0,2,4.Please let me know your original game rules!&nbsp;The rules I propose are as follows&nbsp;(1) The one who can put 4 pieces of the same color in a row horizontally, vertically or diagonally wins.&nbsp;(2) The one who can put 2-0-2-4 in a row horizontally, vertically or diagonally wins.&nbsp;(3)The one who can put same color 2-0-2-4 in a row horizontally, vertically or diagonally wins