Mad Ryantist

MakerVerse Designs

Fully 3d printed crocs shoes<ul><li>Printed with Overture TPU</li><li>PLA for the snap button</li></ul>Important notes:<ul><li>It is for EU shoe size number 42 (male), but you can scale every part (CrocsL1,CrocsR1,Holder,Mount1,Mount2) to your size (use uniform scaling)</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-04-19_0266f756a989a.png"></figure><ul><li>If the shoe is too big to fit to the printers height, use the “WithSupport”-Version, rotate in Y-Axis (green) and use the cut tool in Bambu Studio to create a new flat surface parallel to the print bed<ul><li>I uploaded an .stl file without cut on the bottom for better scaling</li></ul></li></ul>&nbsp;<ul><li>There are two ways to print this:</li></ul><ol><li>Use a textured PEI bed and print it standing up without support</li><li>Or use another not so sticky bed and print it standing up with support</li></ol><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-04-12_cc0523cbae068.png">&nbsp;If you can&#39;t get enough of printed shoes, check out my new model (Slide Shoes, Adilette):<a target="_blank" href="https://makerworld.com/en/models/488792#profileId-401842" rel="nofollow noopener">https://makerworld.com/en/models/488792#profileId-401842</a><img class="image_resized" style="width: 41.76%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-06-08_bb258037ea2a1.png">Have fun with it and leave a like or subscribe if you like it!If there are any suggestions for improvement, feel free to write a comment.

Crocs Shoes - Fully 3d-printed

clothing

SNASA

This is a small and stealthy minimalist heat insert press designed for CNC Kitchen TS100 heat insert set. I didn&#39;t want to use a counterweight so I made an invisible spring and belt system hidden in the vertical part. Its size makes it perfect for small job on the workbench :<figure class="image image_resized" style="width: 42.73%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000430484/design/2024-04-18_a86cd65962c1d.jpg"></figure><figure class="image image_resized" style="width: 42.59%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000430484/design/2024-04-18_4f0eadde94f.gif"></figure>&nbsp;The sides are super convinient to store everything you need (there is also a spot for a small alen key).&nbsp;I have added the step files if you want to design your own soldering iron mount or use a different base.&nbsp;Miscellaneous:<ul><li>20 * M3 brass insert</li><li>22* M3x8</li><li>1 * M3x6 screw</li><li>2 * M3 Nut</li><li>3 * M3x25 screw</li><li>7 * M5 nut</li><li>6 * M5x10 or M5x12 screw</li><li>1 * M5x16 thumb screw</li><li>2 * GT2 idle pulley ID Ø3mm</li><li>1 * GT2 belt (200mm should be enough)</li><li>1 * Spring or elastic band</li><li>1 * LML12B 200mm linear rail</li><li>1 * <a target="_blank" href="https://cnckitchen.store/products/ts100-101-adapter-tips-set-m2-x-m3-m4-m5-m6-1-4-m8-100-lead-and-cadmium-free" rel="nofollow noopener">CNC kitchen Heat Insert Set</a></li><li>Optional :<ul><li>1 * M4x8 Screw</li><li>1 * M4 nut</li></ul></li></ul>Assembling:<ul><li>Insert M3 brass insert (see red arrow below)</li><li>Use M3x8 screw everywhere except 1 * M3x25 (see orange arrow below)</li><li>Use 1 * M3x6 screw to lock the spring or elastic band</li><li>Use 2 M3x25 to mount the GT2 idle pulley</li><li>Insert M5 Nut (see yellow arrow below)</li><li>Make sure to run the belt before assembling the GT2 idle pulley</li><li>Use a small piece of adhesive tape to secure the belt on the arm mount (makes it so much easier to mount the belt on the sliding carriage)</li></ul><figure class="image image_resized" style="width: 79.45%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000430484/design/2024-04-18_86b4fd1a3ef78.png"></figure><figure class="image image_resized" style="width: 35.29%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000430484/design/2024-04-18_75b2c88e1b92e.png"></figure>&nbsp;Print settings:<ul><li>PETG for the soldering iron holder, other part can be printed in PLA</li><li>Layer height : 0.2 mm</li><li>No support</li><li>Print orientation as shown below :</li></ul><figure class="image image_resized" style="width: 54.24%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000430484/design/2024-04-18_75456e3a941b9.jpg"></figure>

clothing

tools