MT09dude

k2thestank

Easy to print and fun to have!Features a slide and lock in Design to hold the Docking station tighter and prevents it from sliding or popping out as easy!<ul><li>You can split the STL's into parts for easier coloring as well if your not using the 3mf file as i have pre-split them in Fusion</li></ul>&nbsp;Stores 12 Game Cartridgestakes approx. 180gramsMaterials: - Crazy GluePrint Settings: - Walls: 3 - Top/Bottom Layers: 4 - Infill: 10% Gyroid Revisions: - Increased size of block for extra game slots and to improve its look- Fixed missing pieces and corrected files that didnt export correctly

Mario Switch Dock - Original System

Sabrina

adiskovarik

Magnetic Fidget Slider Uses total of 12 6x3mm magnets, 6 for each side.I recommend N52 magnets for a stronger snap.&nbsp;Printing:0.2mm layer height for the housing0.1mm layer heigt for the top plate for better quality, otherwise 0.2mm as wellno supports needed&nbsp;Assembly:Glue the magnets to the housing, then glue the top plate on.Repeat for other half of the slider, minding the magnets polarity.&nbsp;Bigger Version here: <a target="_blank" href="https://makerworld.com/en/models/405695" rel="nofollow noopener">https://makerworld.com/en/models/405695</a>

Magnetic Fidget Slider (6x3mm magnets)

Family

Allar3D

A more compact version of the ‘Universal wall mount - Heavy-Duty. It&#39;s quite a bit smaller and slimmer compared to the original version.&nbsp;Download the Heavy-Duty model from here: <a target="_blank" href="https://makerworld.com/en/models/456629#profileId-364531" rel="nofollow noopener">Universal Wall Mount - Heavy-Duty</a>Download the Light-Duty model from here: <a target="_blank" href="https://makerworld.com/en/models/464549#profileId-373195" rel="nofollow noopener">Universal Wall Mount - Light-Duty</a>

Universal Wall Mount - Medium-Duty

tools/gear

fearmyfinger

Slide these over the stock rear wheels and tires on your Arrma Granite Grom to have some ‘drifting’ fun! I recommend setting your remote to 50 TH/LIM and steering rate to max to make it most manageable on hardwood flooring and smooth concrete. You can turn up the TH/LIM on rougher terrain like gravel and asphalt.

Arrma Granite Grom Drift Tire

RC MODS

3DPrintCess

I made a simple shelf for our hueforge pictures which don't have a place and lays everywhere in my office. Now you can print a shelf with (or without) screwholes and put them on the wall. I inserted a deepening to let them stay safe and make a quick change possible.&nbsp;The maximum width is 200mm, I think the most of your hueforge pics should be able to place on it. I will upload a second, wider, shelf for bigger pictures, watch my profile.&nbsp;Printtime is about half an hour and you need supports.&nbsp;Have fun and give feedback ;) And if you want follow me on Instagram ;)

HueShelf - Simple Hueforge Shelf - Simples Hueforge Regal

Hueforge 

squinn

Make better use of that small gap between your seat and center console by sliding in this nice catch-all tray, which includes a space to hold a soda can at the front. The main part of the tray is sized large enough to adequately hold pens, mobile phones, wallets, etc. - while still being small enough to fit on a 25 cm print bed.&nbsp;Both a “left” and “right” orientation is provided, and the support piece should be glued to the bottom - flush with the side of the tray. If your vehicle has a larger gap, then print and add on second copy of the support piece. After assembly, simply slide it into place, and enjoy the ride!

Car Seat Gap Filler Storage Caddy

JimmiboY - Youtube

This is the long box version for my designs that fits the IKEA skadis. take a look at my other models also the Verison 2 all fits togeather.&nbsp;<figure class="media"><div data-oembed-url="https://youtube.com/shorts/sCkYCk8ipaI?si=LPSb8c1VUgzuQoWe"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=sCkYCk8ipaI"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/sCkYCk8ipaI" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>

IKEA skadis Long box V2

Skadis

Maaght

Okay check out my Blank LED Light box sign Template crafted for this contest.&nbsp;ZERO glue/screws required, everything just snaps together!&nbsp;I added a brand new stand to set it into if you're not using the built-in wall hook that can use either 2032 battery powered LED lights like <a target="_blank" href="https://www.amazon.com/Battery-Powered-Operated-Christmas-Decoration/dp/B0852MD6HV/ref=sr_1_5?crid=ZQ5GUEZ262GO&keywords=coobatg+led+light+strip&qid=1699495713&sprefix=led+light+strip+coobatg%2Caps%2C356&sr=8-5" rel="nofollow noopener">this</a>, or one of the 3xAA battery box lights from Michaels or a USB powered cable via the hole//channel on the bottom to plug it in. Also standardized the white sign insert so it can be printed on the A1mini and updated the inner ring to match as well!&nbsp;The sign insert is 100% generatable through MakerLab.If you USE Make My Sign to create the insert:<ul><li>choose circle shape, change the size to 180x180mm</li><li>set Border to NONE or 0mm offset</li><li>set thickness of Base to 0.6mm to fit the inside lip of inner ring</li><li>add your text or SVG's and you're good to go!</li></ul>NOTE: make sure to keep your design 2mm away from the edge to allow for it to lock underneath the inner ring.&nbsp;Let me know what you all think!!&nbsp;UPDATED 12/23/24: added a deeper lightbox profile with a flat inner cavity, noticed that some LED were showing through due to being to close to the sign inset. Also included a new stand to fit the deeper box!

LIGHT BOX 2.0 Template

LightBoxes

Tibberz

This is a test model to find the best flowrate for ironing with a specific filament. Standard setting is set to 10% flow, and that's not enough for some filaments. Print my 3mf and change filament for the part and see directly on the part when its finished what flowrate is best. Feel free to modify if you want.It's just a quick and dirty way to check the best flow.&nbsp;Remember that large prints may need more flow than this test print will tell you because of the small footprint.

Ironing calibration model

TESTS

MKCAMC

I created this version of my Scrub Daddy holder to be hung inside the sink. This allows the sponge to drip dry without needing a tray. I also added a slot in the mouthpiece so water can drain down through it. The hook is scaled at 31mm wide. So it should fit the majority of these dual basin type sinks well. The model can be scaled on the Y axis as it lays in the 3MF file in order to customize the fitment for your sink. Just take into consideration that the starting dimension for the hook is 31mm and go from there. Assembly is easy. The face pieces are designed to fit snugly into the face plate. Just use your favorite glue to keep them in place. Enjoy!!!

Scrub Daddy Sponge Holder V2

Sales

The Big Greek

★ New ★ Update from 02.01.2024 ★ New Since some have asked a small addition for the box. an insert that you can glue into the lid. here is the link<a target="_blank" href="https://makerworld.com/de/models/119870#profileId-128962" rel="nofollow noopener"> Lid Insert</a> <a target="_blank" href="https://makerworld.com/de/models/119870#profileId-128962" rel="nofollow noopener">https://makerworld.com/de/models/119870#profileId-128962</a>&nbsp;★ New ★ Update from 29.12.2023 <a target="_blank" href="https://makerworld.com/de/models/112326#profileId-120249" rel="nofollow noopener">Automatic Z-Axis Lube Helper Ultimate</a> ★ here is the link <a target="_blank" href="https://makerworld.com/de/models/112326#profileId-120249" rel="nofollow noopener">https://makerworld.com/de/models/112326#profileId-120249</a>&nbsp;Rod Cleaner V2 Set + Lid + Tool Case Magnet Version&nbsp;I would like to introduce you to the 2nd version of the box.This one is slightly revised and has cut-outs for magnets.&nbsp;The size of the magnets are 5x3mm&nbsp;I printed it without ironing but there is also a profile with ironing&nbsp;Those who have already printed the first version can also use the lid without magnets.(i like the colour orange, maybe you have already noticed 😎)&nbsp;it is also possible to use only the lid and the small box together as shown in the pictures. works perfectly&nbsp;Now that the <a target="_blank" href="https://makerworld.com/de/models/97403#profileId-103955" rel="nofollow noopener">Complete Rod Cleaner Z-Axis Ultimate Set</a> and the <a target="_blank" href="https://makerworld.com/de/models/89719#profileId-96043" rel="nofollow noopener">Carbon Rods Cleaner V2 X-Axis</a> have been completed, the matching storage box is also available.&nbsp;Here are the links : <a target="_blank" href="https://makerworld.com/de/models/97403#profileId-103955" rel="nofollow noopener">Complete Rod Cleaner Z-Axis Ultimate Set</a> <a target="_blank" href="https://makerworld.com/de/models/97403#profileId-103955" rel="nofollow noopener">https://makerworld.com/de/models/97403#profileId-103955</a><a target="_blank" href="https://makerworld.com/de/models/89719#profileId-96043" rel="nofollow noopener">Carbon Rods Cleaner V2 X-Axis</a> <a target="_blank" href="https://makerworld.com/de/models/89719#profileId-96043" rel="nofollow noopener">https://makerworld.com/de/models/89719#profileId-96043</a>&nbsp;A little organization for many parts makes sense. It takes a little time to print, but it is neatly organized.&nbsp;The toolcase is stackable&nbsp;A small tool case is also included as an additional download.&nbsp;<ol><li>Print and insert the magnets (Size 5x3mm) <img src="https://makerworld.bblmw.com/makerworld/draft/377480/2023-12-21_5456755aba1e8.jpg"> </li><li>Sort :-). here you see also the small box and the lid together <img src="https://makerworld.bblmw.com/makerworld/draft/377480/2023-12-21_8566c63aede1.jpg"> </li><li>put everything you need in the small box, such as lubricant, cutter, cut-out sponge, etc. beautifully organised <img src="https://makerworld.bblmw.com/makerworld/draft/377480/2023-12-21_1318be0503b73.jpg"> </li><li>ready to go <img src="https://makerworld.bblmw.com/makerworld/draft/377480/2023-12-21_68c03b9078a8b.jpg"> </li></ol>Show me your colour designs, i am very curious&nbsp;Have fun printing and if you like it then like it and download it.&nbsp;Thanks for your support

Rod Cleaner V2 Set + Lid + Tool Case Magnet Version

BAMBU ACCESSORIES

lloydliu

为拓竹AMS设计的干燥剂盒，带有一个方便拿取的提手，以及一个经过特别设计的盒盖，盒盖带有两片刀刃型侧板，在向外翻转打开时，可以形成一个小漏斗，辅助装填分子筛或球形变色硅胶干燥剂颗粒。干燥盒分为标准型和薄型两款，分别用于放置在料盘中间的槽位空隙和紧贴边缘的窄间隙位置。&nbsp;11-22更新：1、为统一适配温度计版和标准版干燥盒，重新调整了翻盖的造型（原版本保留，可选择性打印，但互不兼容）；2、根据新的翻盖重新调整了标准型干燥盒翻盖结构（原版本保留，可选择性打印,但互不兼容）；3、缩小了薄型干燥盒的手柄，以避开料盘；4、经测试发现镂空翻盖在打印时容易出现首层不良，因此去掉了盖子的镂空；5、重新上传了所有3mf和stl文件。&nbsp;&nbsp;The drybox designed for Bambulab AMS has an easy-to-reach handle and a specially designed cap with two knife-edged side plates, that can be flipped outwards to create a small funnel to assist in filling molecular sieves or spherical color-changing silica gel desiccant granules. The drybox is available in two versions, standard and slim, and is used to place the slot gap in the middle of the tray and the narrow gap close to the edge, respectively.Update in 11-22:1. In order to uniformly adapt the thermometer version and the standard version of the drybox, the shape of the cap has been readjusted (The original version is retained and can be optionally printed, but two version are incompatible) ;2. The structure of the standard drying box was readjusted according to the new cap (The original version is retained and can be optionally printed, but two version are incompatible) ;3. The handle of the slim drybox has been reduced to avoid interfering the spool;4. After testing, it was found that the hollow cap was prone to defective first layer when printing, so the hollowing out of the cap was removed;5. Re-uploaded all the 3mf and STL files.

AMS干燥盒 Drybox for AMS

jwalker55

This is a protective front cover for the Revopoint Inspire 3D scanner. If your printer's extrusion flow is calibrated, it should friction fit pretty nicely.&nbsp;Update 10/11/23: Added a 2nd stl with a looser fit (scaled to 100.5% per user feedback). If you find that it fits a bit too tight for your liking, you can either scale the original to 100.5% in your slicer, or download the pre-scaled version included here named “Revopoint Inspire Cover - Looser.stl”

Revopoint Inspire Front Cover

RevoPoint

Markus710

SENA Docking Station for 50S & 30k. Others could work but I'm not sureFot the 30k you have to put in a micro USB cable for the 50S you need a USB C cable.

SENA Docking Station 30K & 50S

Motorcycle

jaspauls

Introducing our Pegboard Hook, designed to fit snugly into pegboards with 15 mm hole spacing with a diameter of 4.5mm. It offers a secure hold for various items. Perfect for hanging cables and enhancing workspace organization, this hook streamlines your setup effortlessly.

Hook for pegboard

Pegboard 

rjs3dprints

Helps me focus or concentrate better, while others may engage in it unconsciously as a response to stress or nervousness. there has been a growing trend of fidget toys and gadgets designed to provide a tactile outlet for fidgeting behaviors, which are sometimes marketed as tools to improve focus and reduce anxiety.&nbsp;Magnets i used are:<a target="_blank" href="https://totalelement.com/collections/disc-magnets/products/3-8-x-1-16-inch-neodymium-rare-earth-disc-magnets-n35-100-pack" rel="nofollow noopener">https://totalelement.com/collections/disc-magnets/products/3-8-x-1-16-inch-neodymium-rare-earth-disc-magnets-n35-100-pack</a>&nbsp;&nbsp;watch how to:<figure class="media"><div data-oembed-url="https://youtu.be/dHBHrIKTGT0?si=tTZrYCbYB7ovmZ0v"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/dHBHrIKTGT0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Magnetic Fidget Slider

Fidgets

JamesThePrinter

Rotate the creme filling for satisfying clicks! As you rotate the filling, the spring arm will move from one position to the next, giving you a nice tactile feel. This model was designed to be the actual size of a Double Stuf Oreo (with extra creme for a better grip).&nbsp;&nbsp;AssemblyStart with one wafer piece upside-down. Glue the center gear into the center of the wafer. Stack the creme filling onto the wafer, ensuring that the tip of the spring is inside the gear. Glue the second wafer onto the remaining end of the center gear.&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The filaments used in the picture above are polymaker PolyTerra Charcoal PLA and Hatchbox True White

Super Clicky Oreo Spinner

Random/Fun/Cool

K2_Kevin

<h2 style="text-align: center">Bambu Labs 6 Piece Tool Set</h2><a target="_blank" href="https://makerworld.com/en/models/478965#profileId-390252" rel="nofollow noopener">NEW LABELED Version now available HERE!</a><a target="_blank" href="https://makerworld.com/en/models/478965#profileId-390252" rel="nofollow noopener"><img class="image_resized" style="width: 33.01%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014462/design/2024-05-30_cafe0726686af.png"></a><figure class="table" style="width: 100%"><table class="ck-table-resized" style="background-color: hsl(90, 75%, 60%); border: 4px groove hsl(120, 75%, 60%)"><colgroup><col></colgroup><tbody><tr><td style="text-align: center">Don&#39;t forget to Follow! Thank you so much for your Downloads, Like and BOOSTS!</td></tr></tbody></table></figure><figure class="table"><table style="border: 2px solid hsl(0, 0%, 60%)"><tbody><tr><td>Included Tools:<ul><li>AMS Power Cable Disconnect - Pushes the hidden clip that is facing printer on the AMS Buffer &amp; Hub.</li><li>AMS HUB PTFE Disconnect - Remove PTFE tube from the Bambu Lab AMS Hub (Smaller than Buffer)</li><li>AMS BUFFER PTFE Disconnect - Remove PTFE tube from the Bambu Lab AMS Buffer (Larger than Hub)</li><li>Buffer Outlet Fork - Fits between spring (through the slot, no need to remove buffer/hub) and slide/push on the PTFE coupler in the AMS Buffer/Hub. Also works great for PTFE removal on hotend and AMS.</li><li>2x Hotend Wire Disconnects - If you need a helping hand removing the Bambu Hotend/Nozzle Connectors.</li></ul></td></tr></tbody></table></figure>&nbsp;If you want to up your cool game, use 6x3mm Magnets. Pay close attention to the magnets polarity (all bottoms face same direction/polarity). They&#39;re designed to fit magnets snugly, but you might need a little glue for some of them.<h3>NEW TOOL SET HOLDER: <a target="_blank" href="https://makerworld.com/en/models/105024#profileId-112080" rel="nofollow noopener">https://makerworld.com/en/models/105024#profileId-112080</a></h3><figure class="table"><table style="border: 2px dashed hsl(0, 0%, 90%)"><tbody><tr><td>Example usage:<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014462/design/bda22def-b638-4952-8963-d468f39e906e.webp"></td></tr></tbody></table></figure>&nbsp;<h3>Checkout some of my other models…</h3><a target="_blank" href="https://makerworld.com/en/models/478965#profileId-390252" rel="nofollow noopener">https://makerworld.com/en/models/478965#profileId-390252</a><a target="_blank" href="https://makerworld.com/en/models/478965#profileId-390252" rel="nofollow noopener"><img class="image_resized" style="width: 52.2%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014462/design/2024-06-03_450eebd518686.png"></a><a target="_blank" href="https://makerworld.com/en/models/472091#profileId-381848" rel="nofollow noopener">https://makerworld.com/en/models/472091#profileId-381848</a><a target="_blank" href="https://makerworld.com/en/models/472091#profileId-381848" rel="nofollow noopener"><img class="image_resized" style="width: 52.84%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014462/design/2024-05-30_20146411d27.png"></a><a target="_blank" href="https://makerworld.com/en/models/105024#profileId-112080" rel="nofollow noopener">https://makerworld.com/en/models/105024#profileId-112080</a><a target="_blank" href="https://makerworld.com/en/models/105024#profileId-112080" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014462/design/2024-05-30_853680d87f4e1.png"></a>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/81622#profileId-86911" rel="nofollow noopener">https://makerworld.com/en/models/81622#profileId-86911</a><a target="_blank" href="https://makerworld.com/en/models/81622#profileId-86911" rel="nofollow noopener"><img class="image_resized" style="width: 52.89%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014462/design/2024-01-25_2082d4a4681bf.png"></a><a target="_blank" href="https://makerworld.com/en/models/131156#profileId-142275" rel="nofollow noopener">https://makerworld.com/en/models/131156#profileId-142275</a><a target="_blank" href="https://makerworld.com/en/models/131156#profileId-142275" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014462/design/2024-06-03_f618df312f7da.png"></a><a target="_blank" href="https://makerworld.com/en/models/152636#profileId-166673" rel="nofollow noopener">https://makerworld.com/en/models/152636#profileId-166673</a><a target="_blank" href="https://makerworld.com/en/models/152636#profileId-166673" rel="nofollow noopener"><img class="image_resized" style="width: 52.7%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014462/design/2024-01-25_de1a3154efbf3.png"></a>&nbsp;&nbsp;&nbsp;This original disconnection tool inspired an entire line: https://www.printables.com/model/382058-bambu-ams-disconnect-tool