MMReightM

BastelTube

Drip tray as a kitchen helper for sponges, etc. The top and bottom can be printed separately from each other so that you can play with the colours. &nbsp;No support is needed for printing.

Drip tray / Kitchen helper or soap tray

Soap dish

MarkelL

Eiffel Tower model with easy to remove supports

Eiffel Tower

Howell

This is an optimized version of Mandalorian Helmet for people with slight bigger head or nose (like me :) )It is scaled 1,20% bigger and still mantain optimized supports.Print speed are 300 mm/s for all internal a slower for external, I suggest to turn off AUX fan or just put slow to avoid any kind of parts with different aesthetic results.Attached are file to print it in separate parts and optimized 3MF for the accessories (speed have been slowered down due to side parts fallen down when using creator profile).&nbsp;This is the way!&nbsp;FYI: PLA is from Azurefilm, Silk Graphite Grey&nbsp;&nbsp;Update 10/21/2023: Added Print profile for accessories

Mandalorian Helmet - Big size 

Helmet

codename7034

This is GUNS from PUBG for Dummy 13.WARNING! It is for 200% scale of Dummy 13&nbsp;Made by Michelincat

PUBG Guns for Dummy 13 (200% scale)

Dummy 13

Chrizzo

Hello everyone,I still had the Bambu Lab LED Lampkit-001 lying around and I didn't want to just print the standard for it...You can buy the kit in the Bambustore, or simply get it for free via the store using a voucher (via points collected from Makerworld). <a target="_blank" href="https://eu.store.bambulab.com/products/led-lamp-kit-001" rel="nofollow noopener">https://eu.store.bambulab.com/products/led-lamp-kit-001</a>&nbsp;It is designed in such a way that the lamp really fits very precisely. This may even mean that you have to do a little bit of sanding. Nevertheless, I wanted it to fit extremely precisely so that the LED fits directly into it.Do yourself a favor and start with the part where the cable comes out of the LED.&nbsp;And now have fun printing and happy holidays!

Christmas Angel - Bambu Lab LED Lampkit-001

Printed

K2_Kevin

Larger version of my HEX Tray/Bin.

Hey Tray / Bin Large

Organizer

tsubus

IMPORTANT: you cannot use the profiles that some people have posted, you must use the raw files (click download STL and select the appropriate 3mf file). Makerworld removes any custom gcode from posted profiles.&nbsp;Simple temperature towers for the Bambu Lab P1S created with Tinkercad. The files already contain the necessary g-code to print correctly with Bambu Studio.&nbsp;Currently the following towers have been added:  <ul><li>190-230 (PLA) (steps of 5)</li><li>230-190 (PLA) (steps of 5, reversed)</li><li>230-270 (PETG) (steps of 5)</li><li>270-230 (PETG) (steps of 5, reversed)</li><li>240-280 (ABS) (steps of 5)</li><li>280-240 (ABS) (steps of 5, reversed)</li><li>210-240 (TPU) (steps of 5)</li><li>240-210 (TPU) (steps of 5, reversed)</li></ul>

Bambu Lab P1S Temperature Tower PLA,PETG,ABS,TPU

Calibration

Siganberg

This is a spool stand holder that I used from my custom 3D printer workstation found inon this video:&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/QbNXD-JMRL0?si=DRzJyPcoj07vqHqH"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/QbNXD-JMRL0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Cabinet Spool Holder/Stand

Spool holder

All Things STL

NEW NEW!! SCREW WALL!! See videos for description… Click the link below to check it out…&nbsp;All the other files in this collection are for the Honeycomb Wall that I no longer use.&nbsp;<a target="_blank" href="https://www.printables.com/model/544779-screw-wall" rel="nofollow noopener">https://www.printables.com/model/544779-screw-wall</a>&nbsp;Some of the files require support but just the ones with the middle hex connections.&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/c2PZH-eX0i0?si=g3pNL-yLpcjtgSpo"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/c2PZH-eX0i0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/OImDS4lT7Kc?si=Fp0P3wua8jDUfklq"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/OImDS4lT7Kc" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><figure class="media"><div data-oembed-url="https://youtu.be/R5rCSqXRi7Q?si=FggY1tEdJ6Q9rlLi"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/R5rCSqXRi7Q" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;&nbsp;&nbsp;&nbsp;

HoneyComb Storage Wall remixes & Screw Wall

Honey Comb Wall

technerd

THE ULTIMATE NOZZLE WIPER&nbsp;I print a lot of PETG with my Bambu Lab P1S and was a little disappointed with the original Nozzle Wiper it didn't cleaned well enough. That's why I came up with a simple and inexpensive solution to get a perfectly clean nozzle. All you need is a good quality silicone tube. I tested mine with a soldering iron (Weller Digital set at 250°C) and it didn't melted at all. STEP file is included in case you have a silicone tube with a different diameter.&nbsp;HINT: Someone on Facebook “Thanks Avianna!” told me she is putting a tiny bit of high smoke point oil “she is using grapeseed oil” on and around the clean nozzle. The oil does wear off after a while but you just keep a q-tip near by and a tiny bit of oil. Takes a second to apply. Lasts for days if not weeks. Makes for consistently clean prints ensures enhanced print quality with cleaner and more precise prints by repelling plastic and preventing buildup. Apply the oil at room temperature not at printing temperatures! It works like this expensive plastic repellent fluid from slice engineering. TEFLON or PTFE oil should work too. Use at your own risk. Just wanted to share this information with you guys.&nbsp;Printing:Keep it simple and print it from PETG and 15-20°C hotter than usual. PETG has very good layer adhesion and resists higher temps too. Don't print it from ASA/ABS or it will break very easily because ASA/ABS has in comparison bad layer adhesion.&nbsp;Quality Silicone Tube (200-300°C)You can find the silicone tube on amazon or if you're from germany here: <a target="_blank" href="https://schlauch24.de/Silikonschlauch-Meterware-3-mm-x-7-mm" rel="nofollow noopener">https://schlauch24.de/Silikonschlauch-Meterware-3-mm-x-7-mm</a>It is also available on aliexpress here: <a target="_blank" href="https://de.aliexpress.com/item/32608855966.html" rel="nofollow noopener">https://de.aliexpress.com/item/32608855966.html</a>&nbsp;Outer diameter = 7mmInner diameter = 3mmCut to exact length = 19mm (this length is barely touching the silicone sock from the nozzle)Cut approx. 3mm deep into the cross section, offset by 90 degrees&nbsp;Installation:Push the silicone tube down until it touches the adapter. Re-use the screw from the original wiper. I also made a thicker segment on the pin to prevent the tube from slipping off. I have also strategically positioned the pin so that the nozzle passes right through the center cleaning the nozzle perfectly. Happy printing!&nbsp;&nbsp;SILICONE TUBE CUTTING JIGI also made a simple cutting jig to easily get the correct length and cross section cuts, here: <a target="_blank" href="https://makerworld.com/en/models/95952" rel="nofollow noopener">https://makerworld.com/en/models/95952</a>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/765231/2023-12-16_63723a4e1d179.jpg"></figure>&nbsp;Here is a short Youtube video showing how it works:<figure class="media"><div data-oembed-url="https://youtu.be/rk-14syxViI"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/rk-14syxViI" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;

Ultimate Nozzle Wiper Bambu Lab X1 P1 P1S

Printer Upgrades

Ryxxi_makes

Clips onto the Cable chain very securely and rigidly. Then snap in the bowden tube. &nbsp;Use pliers to remove the clips by slowly lifting one end from the cable chain.&nbsp;The clips are very sturdy and dont move much.&nbsp;&nbsp;

PTFE cable chain clip for P1P/P1S and X1C

Tools

babodad

I adjusted the Fibonacci Tree Model by TripeGWorkshop and inserted the Bambu LED 001 Mount.Only works with my print profile.&nbsp;You can use the <a target="_blank" href="https://eu.store.bambulab.com/products/led-lamp-kit-001" rel="nofollow noopener">https://eu.store.bambulab.com/products/led-lamp-kit-001</a> or a LED tea light mount. I created this tea light base <a target="_blank" href="https://makerworld.com/en/models/89483" rel="nofollow noopener">https://makerworld.com/en/models/89483</a> for use with 37mm LED tea lights (https://amzn.eu/d/4AbR9P6)

Fibonacci Christmas Tree for LED Lamp 001 or Tea Light

Christmas

Team Guapos

I Designed a full set of furniture for a full room of a dollhouse or as an addition to existing dollhouses where some furniture parts are missing.All of the single STL files are included so you can also print single pieces and not the full set.No support is needed for any of the models. The right orientation you can find in the .3mf file.&nbsp;A fitting kitchen Dollhouse set you can find here: <a target="_blank" href="https://makerworld.com/en/models/377041#profileId-276957" rel="nofollow noopener">https://makerworld.com/en/models/377041#profileId-276957</a>&nbsp;If you want any additions to the collection, comment and i try to add them as soon as possible!&nbsp;

Furniture Set Dollhouse Play Set

dalet11

This is a shorter version of the best Laptop Stand ever!<a target="_blank" href="https://makerworld.com/en/models/67488#profileId-71449" rel="nofollow noopener">Original Remix here.</a>&nbsp;<figure class="image image_resized" style="width:69.37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/282902/2023-12-10_f9c5c73e3546c8.png"></figure>&nbsp;Compared to my original remix, this version is shorter by 28mm in height to be aligned with the tray height.It will also be more comfortable when needing to type the keyboard when the laptop is on the stand.&nbsp;Note that the original tray will fit this version, but it will be a bit tight - the tray height in this version was also reduced by 1.5mm for better fit - so if you already printed my original remix, check first if the original tray is ok for you before printing new one.&nbsp;—&nbsp;Based on TVL 3D design, I've improved it a bit to support also 15.6 inches laptops (originally fits only 13.3/14), and added a “stopper” to the tray so it won't come out when pulling.<h4>Features:</h4><ul><li>Tray to hold all your desk stuff.</li><li>support 14/15.6 inches laptops (tested with Asus TUF A15, Lenovo E14/15).</li><li>Cable holder that can fit anywhere at the sides.</li></ul>&nbsp;Dimensions : 360mm X 251mm X 104mm&nbsp;There are 3 plates to print, I recommend printing the tray and cable holder in different colors - it's beautiful!

Shorter - 14/15.6 Laptop Stand with Tray and Cable Holder

Laptop stand

mugglesmuggle

Simple and elegant stand made for the Apple Magsafe charger. Easy to print in place. <h4>Idea</h4>Inspired by the Twelve South Forté stand used by Apple to showcase the new StandBy mode for iOS. I wanted to create the most simple, easy to use and print stand for the magsafe charger and the iPhone.<h4>Two versions</h4>Because I love to have the choice, I created two versions :<ul><li>All in one, single piece, ready to be printed in place with no supports and no brim.</li><li>Split version where the base and the head are separate and held together by a screw, allowing you to choose two materials etc. Also easy to print, with recommended brim only for head and screw.</li></ul><h4>Printing instructions</h4>I recommend printing at 0.2mm, as is. It was specially designed to work without supports.For the split version, I recommend adding a brim for stability for the head and the screw.<img src="https://media.printables.com/media/prints/582465/rich_content/e038f599-b648-4cd8-9eb8-d1368cd9b203/image.png"><img src="https://media.printables.com/media/prints/582465/rich_content/add2c07c-6a12-4cc5-8f6e-fdfaa9722e9e/thumbs/cover/800x661/png/image.webp"><h4>Want some more ?</h4>I also designed a clamp version available <a target="_blank" href="https://www.printables.com/model/509756" rel="nofollow noopener">here</a>.<h4>Buy me a coffee</h4>If you like my work, you can <a target="_blank" href="https://www.buymeacoffee.com/thomasdroze" rel="nofollow noopener">buy me a coffee</a>. Appreciated !

Magsafe charger stand for iPhone

Phone stand

wuguigui

This lampshade is designed for the Bambu Led Lamp 001, the structure has been tested to fit the base well.There are 2 styles for choice, have fun!Disclaimer: This model is part of the Creator Program, When you purchase the LED Lamp Kit-001 through the links below, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to the public.)Hardware Kit: <a target="_blank" href="https://shrsl.com/4cxd4" rel="nofollow noopener">LED Lamp Kit 001</a>Recommended filaments: <a target="_blank" href="https://shareasale.com/r.cfm?b=2282157&amp;u=4048186&amp;m=138211&amp;urllink=store%2Ebambulab%2Ecom%2Fproducts%2Fpla%2Dtough&amp;afftrack=" rel="nofollow noopener">Bambulabs PLA Tough</a>, or other <a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&amp;u=4048186&amp;m=138211&amp;urllink=&amp;afftrack=" rel="nofollow noopener">Bambu Filaments</a>&nbsp;A new  <a target="_blank" href="https://makerworld.com/en/models/162037#profileId-177867" rel="nofollow noopener">Icosahedron lamp</a> based on LED Lamp Kit 001 as well<a target="_blank" href="https://makerworld.com/en/models/162037#profileId-177867" rel="nofollow noopener">https://makerworld.com/en/models/162037#profileId-177867</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000020185/design/2024-01-29_e386c32664eed.png"></figure>&nbsp;

lampshade for LED Lamp Kit

Lamp

Nico

<h3>iPhone 13 pro case</h3><h4>Support the designer:</h4><ul><li>Donate Bitcoin here: bc1q9mhh7l53mmlnqqmazdnr6gele0smrzkunclfvj</li><li>Donate Ethereum here: 0x36CA6EEF3700ff18858f195706C5E3A9d6458241</li></ul>&nbsp;I went through a few iterations to make this case perfect. There's a few features that make it really good:<ul><li>Buttons are all have a good click to them. No inconvenient holes, all buttons are covered, including the action button.</li><li>The case has a tight grip on the phone, doesn't slide out easily.</li><li>Camera bump guard is split from the case, so you can print it in different materials like PLA or TPU and different colors.</li><li>Beautiful honeycomb pattern that makes for a nicer finish</li><li>relatively easy to print without bulging or other critical problems</li></ul><h3>Assembly:</h3><ul><li>insert the camera bump guard first in the right direction</li><li>Insert all 3 buttons</li><li>finally insert your phone!</li></ul><h3>How to print:</h3><ul><li>TPU 95: a strong flexible filament is required for the case</li><li>Camera bump guard can be print in TPU or PLA.</li><li>Use supports on tight overhangs on the case like the buttons and speaker and port bridges.</li><li>I recommend 15% infill, for better clickiness of buttons.</li><li>If you want the cool effect to highlight the honeycomb pattern in a different colour, you'll need to add a stop at layer 2 and 3. This means you'll start with TPU, change to the other colour at layer 2 and revert to TPU at layer 3.</li><li>Print 3 volume rocker buttons and 1 power button</li></ul><h3>Update log:</h3><ul><li>2023-11-23: first version uploaded</li></ul>

iPhone 13 pro case honeycomb

Phone case

Akio-42

I love the gridfinity system started by Zack Freedman and the design idea of easy accessibility and of displaying the stuff that is stored, rather than store it away. With my Gridfinity Ikea Samla adapter (<a href="https://bit.ly/GridfinitySamlaAdapter11l" rel="nofollow">https://bit.ly/GridfinitySamlaAdapter11l</a>) I added an easy way of transporting more than a few boxes which I felt was lacking.But when stacking several bins on top of each other it can be a bit tedious to access the lower bins in the Ikea Samla box. So I made a tray that can be placed on top of Gridfinity bins like normal bins and should be sturdy enough to lift it out easily. It is the same size as the baseplate on the bottom of the 11l Ikea Samla box (39x28x14 cm) with a 5x7 grid. And it only reduces the capacity of an 11l box by 1 3U high divider bin. So you can stack 4 3U high divider bins and the tray in an 11l Ikea Samla box. The handles are designed for optimal usage when stacking 2 3U high divider bins on the bottom and 2 3U high divider bins on the very top. Or you can just use it as a regular tray for moving your Gridfinity bins. You can then use any of the x*5 sized modular baseplates (<a href="https://bit.ly/GridfinityModularBaseplates" rel="nofollow">https://bit.ly/GridfinityModularBaseplates</a>) to attach the handles to (will not snap in to the top of other bins if you use it like that).New - Small and Big HandleThere is now a small and a big handle available. <ul><li>The small handle fits perfectly in the Samla 11l boxes.</li><li>The big handle is designed to be used with the Samla 22l boxes. The small handle can also be used with the Samla 22l box, but only on the top.</li></ul><h4>What do you need to print</h4><ul><li>You need to print 2x the Handle_Small.stl or Handle_Big.stl</li><li>If you have the possibility print 1x the TrayPlate_5x7.stl (requires at least a 300x250mm print bed). This will give you the best stability and best experience.</li><li>Or you can print 2x the TrayPlate_3x5.stl and 1x the TrayPlate_1x5.stl and attach them together with screws.</li></ul><h4>Assembly</h4><ul><li>Use 4 m3x12 button head cap screws (BHCS) and 4 m3 hex nuts to attach the two handles to the 5x7 tray plate (2 screws per handle are enough, but you can use more if you want)</li><li>If you decided for the two 3x5 and one 1x5 tray plates attach them together using 10 m3x8 screws (BHCS) and 10 m3 hex nuts first (same way as for the bottom grid for the Ikea Samla box - see here: <a href="https://bit.ly/GridfinitySamlaAdapter11l" rel="nofollow">https://bit.ly/GridfinitySamlaAdapter11l</a>)</li></ul><h4>Attribution</h4>I designed the handles of the tray myself.I marked the model as remix because the tray plate is based on my modular gridfinity baseplates (<a href="https://www.printables.com/model/360046-gridfinity-modular-baseplates" rel="nofollow">https://www.printables.com/model/360046-gridfinity-modular-baseplates</a>). The baseplates are now stackable. The original baseplates have a flat bottom and are desiged to be placed on flat surfaces. These baseplates cannot only be securely stacked upon another, but also be securely stacked on bins. It allows layered storage of gridfinity bins combined with easy accessibility. This is reached by the bottom of the baseplates being modeled after the Gridfinity system and based on the specification available at <a href="https://gridfinity.xyz/specification/" rel="nofollow">https://gridfinity.xyz/specification/</a> which is shared unter the licence <a href="https://creativecommons.org/licenses/by-nc-sa/4.0" rel="nofollow">https://creativecommons.org/licenses/by-nc-sa/4.0</a>