It printed great on the H2s. I paused it 1/2 way through to put in some money. That was unnecessary because it paused around 3/4's on its own. I haven't cracked it yet, but I feel the kids will be able to knowing there is something inside🤣

This is one of those things you didn't know you needed. I printed 3 for the family and it's great!

I used Dark Chocolate PLA (I didn’t have wood) and Silver Silk PLA for the straps. A gray tone may look a little better but this thing is a pretty cool print. I love the detail. I also let it use the supports, but I think it may have been fine without them. I added some wording to the top to give as a gift.

I played with the settings so it could be my fault but the little prongs broke when trying to snap in the plug. (I used PLA) which may also have been a factor. Even without the plug, this tool is still usable and stays together thanks to a solid design. The 2 shaft design does not work on my H2S as seen in the pic. because the threaded rod is closer on both the left and the right side. it does work perfectly on the rear set which maybe was all it was for. I’m still learning😜

This printed well and would be functional if I had the right charger. I didn’t realize my charger has the cable coming out the side. 🤨 not the designers problem. I would recommend this just make sure your cord will fit.

Printed well, I used PETG, and went together easily. it is slightly taller than I expected but still fits in the fridge.

this printed well, the only comment i have is that the larger opening fits my smallest covers. it may have been clear in the description on what sizes but i didnt read it that closely. if you have those smaller containers (which would be pretty small) this is perfect

as advertised. printed well!

worked and printed well.

works as described. allowed me to keep it from sliding in the drawer. FYI there is a fusion (free for students) plugin that will make gridfinity bases any size and add spacers to any side to fill the drawer😉There is a plugin for trays as well.

printed great, exactly as shown.

I used PETG gray and white. I had to do very light sanding at the very tip but it printed and performs excellent! I highly recommend this one.

This is very nice as no hardware is required. I printed it on an H2s but made it all one color PETG and 1 bed. The only issue I had was because I flipped the nut 180° (I thought would be fine) and it had some strings near the top. I’m sure it would be perfect if I left it alone:) It still looks and functions as designed. Great Job!

Worked perfectly to get some drawers in order.

Daughter loves it!

I used an ams for colors and PLA. 1 grill with just silver and white, the other with silver, black, and white. Both printed great. I think it looks better with the black though. I tried to remove the backdrop behind the logo so I could print just the white lettering (like their actual amp) I could separate the lettering but I was unable too separate the backdrop from the grill. This is a cool print, I recommend it!

everything looks great except the white outline. I’m not sure how to fix it. it looks great from a distance though. the back looks perfect.