MIWIDO

sansforge

A nifty little keychain based off of the Fallout Brotherhood of Steel Power Armor! Measures roughly 70x74x4mm. Slightly larger than your average keychain, makes a great ornament or rearview mirror hanger as well. See specs and adjustments below!&nbsp;PLEASE NOTE If you adjust the size of the model, it will most likely mess with the layers, and if will likely make the filament swap layers inaccurate.&nbsp;Printed on a Bambu X1C Carbon 0.2mm nozzle on the Textured PEI plate. Used Bambu Matte PLA Charcoal, Ash gray and Ivory White&nbsp;Start with Charcoal (or any black filament)At layer #63, swap to Ash Gray (or any gray filament)At layer #84, swap to Ivory White for the rest (or any white filament)&nbsp;Layer height 0.04mmInitial layer height 0.2mm&nbsp;Ironing on top surfaces, rectilinear pattern&nbsp;Sparse infill density 100%Infill pattern rectilinear&nbsp;Initial layer 50mm/s, Initial layer infill 105mm/s, outer wall 200mm/s, inner wall 200mm/s, small perimeters 50%, sparse infill 150mm/s, internal solid infill 150mm/s, top surface 150mm/s, bridge 50mm/s, gap infill 200mm/s, travel 500mm/s, normal printing 10000 mm/s, initial layer 500mm/s, outer wall 5000mm/s, top surface 2000mm/s, sparse infill 100%.&nbsp;Bed adhesion: outer brim only, 5mm width and 0.1mm gap. Helps prevent corner curl.&nbsp;Adjust the height range modifier under Objects. For layer range 0-2mm set the layer height to 0.14mm, infill density of 15%. 2-4mm layer height of 0.04mm and infill density of 100%&nbsp;Bed temperature 55c, no cooling for the 1st layer.

Fallout Brotherhood of Steel Keychain Ornament

MIWIDO 

TimothySt

I wanted to free up some desk space so I decided to hang my AMS lite on an Ikea Skadis board. So far it works perfectly. Files: There are multiple files, since there are two ways to mount the AMS Lite - with the cable facing upwards or downwards. Choose the orientation that suits you best. You can also print the mount and the pegs separately. &nbsp;Printing: The model can be printed on the Bambu Lab A1 mini. I printed the mount with 25% infill density and tree supports. For the hooks i used 50% infill density. I used Bambu Lab PLA Tough for everything. You only need tree supports for the larger overhangs, not for the screw holes or peg holes. Assembly: The 4 pegs can simply be fitted into the holes and then the whole thing hangs securely on your Skadis board. Stability: I have used this mount with 4 spools on the AMS Lite and have had no stability issues, but please test it for yourself.&nbsp;&nbsp;Enjoy :)

Skadis AMS Lite Mount

Drucker A1

la 3d dans la poche

Voici un support en 2 parties qui est simple à imprimer pour 2 pinces coupantes. Il s'adapte aux plaques ikea Skadis.<a target="_blank" href="https://makerworld.com/fr/models/search?keyword=tag:%20ikea" rel="nofollow noopener">ikea</a><a target="_blank" href="https://makerworld.com/fr/models/search?keyword=tag:%20caliper" rel="nofollow noopener">caliper</a><a target="_blank" href="https://makerworld.com/fr/models/search?keyword=tag:%20ikeaskadis" rel="nofollow noopener">ikeaskadis</a><a target="_blank" href="https://makerworld.com/fr/models/search?keyword=tag:%20skadis" rel="nofollow noopener">skadis</a><a target="_blank" href="https://makerworld.com/fr/models/search?keyword=tag:%20holder" rel="nofollow noopener">holder</a>