MC project

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 225x150mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.5mm and the Actual Depth is 2.6mmFilaments Used:     PLA BambuLab Black Transmission Distance: 0.3     PLA Sunlu Dark Gray Transmission Distance: 2.5     PLA BambuLab Basic Silver Transmission Distance: 0.5     PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments!!!!  It appears you have mixed filament types.  Be certain this is what you want.  !!!!!Swap Instructions:     Start with Black     At layer #12 (1.04mm) swap to Gray     At layer #17 (1.44mm) swap to Silver     At layer #22 (1.84mm) swap to Jade White for the rest.

Squirrel Hueforge - Scoiattolo - Painting Animals

Animals Hueforge

<h2>European Cart Coin/Key</h2>1 euro coin form factor, compatible with most carts. Easy to use and can be used as a key holder. Just a simple and effective design.The ones pictured printed very quickly with a 0.4mm nozzle.------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------<h2>Moneta/Chiave per carrello europeo</h2>Fattore di forma moneta da 1 euro, compatibile con la maggior parte dei carrelli. Facile da usare e possibilità di usarla come porta chiavi.Solo un design semplice ed efficace. Quelli nella foto sono stati stampati molto velocemente con un ugello da 0,4 mm.&nbsp;&nbsp;

Shopping Cart Coin keychain Portachiavi moneta

Key Chain

a.vdh_1983

If you like my work, i'm open for donations via Paypal. It is much appreciated. <a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=3KZUPFUG4KLUL" rel="nofollow noopener">https://www.paypal.com/donate/?hosted_button_id=3KZUPFUG4KLUL</a>&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA Bambu PLA Blue Transmission Distance: 5 PLA Bambu PLA Red Transmission Distance: 5 PLA BambuLab Matte White Transmission Distance: 4Swap Instructions: Start with Black At layer #4 (0.4mm) swap to Blue At layer #8 (0.72mm) swap to Red At layer #15 (1.28mm) swap to White for the rest.&nbsp;Reminder:My models mostly cover the entire bed, this means the purge line is sometimes running through the bottom of the print. You have 3 options here: - Leave as is, you can just cut them of afterwards. - Remove immediately after the purge line is printed. - Scale the model:*** WARNING *** WHEN SCALING THE MODEL, BE SURE TO NOT SCALE THE Z-HEIGHT! The Z-height must always be as original, otherwise the print is messed up.

Animals Hueforge

Key Chain

Marvel