Designed for CryptoMinder v2 on the ESP32-JC2432W328C, this enclosure features an adjustable stand, snap-fit rear cover, passive buzzer support, and rear ventilation holes for improved airflow. The display is secured with 4 M3 x 6 screws, while the adjustable stand uses 2 M4 x 20 screws and 2 M4 nuts. Perfect for running CryptoMinder as a dedicated real-time cryptocurrency portfolio monitor. Firmware and setup instructions: https://mbruneau.com/cryptominder/

I designed this stand for the Cheap Yellow Display (ESP32-2432S028), perfect for running CryptoMinder or any CYD project. It uses 4 M3 x 6 screws to secure the screen and 2 M4 x 20 screws with M4 nuts for adjustable pivoting legs. The back panel snaps on with tabs, so no screws are needed, and there is a built-in cutout for a 12mm x 8.5mm passive buzzer for alerts. I’ve been using it with CryptoMinder to monitor balances, prices, and portfolio value in real time right from my desk.

Just finished a new stand for the Cheap Yellow Display (ESP32-2432S028). Uses 4× M3 screws to secure the screen, with a snap-in back panel that installs without screws. Includes a 12×8.5mm passive buzzer cutout and recesses for 3mm rubber feet. Clean, sturdy, and angled for desk use.

Just finished a new stand for the Cheap Yellow Display (ESP32-2432S028). Uses 4× M3 screws to secure the screen, with a snap-in back panel that installs without screws. Includes a 12×8.5mm passive buzzer cutout and recesses for 3mm rubber feet. Clean, sturdy, and angled for desk use.

Designed a clean stand for three ESP32-2432S028 (Cheap Yellow Display / CYD) boards. It’s a 4-part build with side frames, a back leg, and an optional faceplate. USB cutouts on both sides, mounts with M3 x 6 screws, and spots for 5mm rubber feet. Perfect for NMMiner or NerdMiner V2 setups

I designed a slide-in case for the ESP32-P4-WIFI6 that requires no screws or supports. The board slides in from the side and locks in place with a snug friction fit. It may feel tight on the first insert by design, but it loosens slightly with use. I’ve tested it with both AliExpress and Waveshare versions and both fit perfectly.

Just finished designing this sleek holder for the 4th-gen Apple TV HD remote! It’s got a clean front, a polygon pattern on the back, and a perfect cutout to show the Apple logo. Prints great without supports and looks awesome in black and white.

Just finished designing a Rugged Box for Apple Watch bands! 💪 It holds up to 8 bands, assembles with 6 M3x25mm screws, and even hides a secret message inside the lid — “I love you.” You can color the hidden text in Bambu Studio or leave it invisible. Made this one for my wife after she said my box was too big!

Just dropped a new Apple TV 4K Remote Holder! 🖤 It’s got a clean, minimal front so it doesn’t take up space, plus a back cutout of the Apple Logo that lines up perfectly with the Apple logo. Simple, sleek, and functional.

I designed this Apple TV 4K remote holder with a clean, minimal front so it doesn’t take up any extra space where you use the remote most. On the back, it features a repeating octagon pattern that gives it a modern look while keeping things lightweight. There’s also a cutout in the back to showcase the Apple logo, adding a touch of style to your setup. A simple, sleek, and functional way to keep your remote organized while letting your Apple gear shine.

Keep your cables organized with this handy clip! It features a push-button release and a carry handle for easy use. Prints with supports, and I recommend using PET-G for the button for extra durability.

I wasn’t happy with how the red side turned out on the first version—the white text looked slightly transparent, and no matter what I tweaked in Bambu Studio, I couldn’t get it just right. So this time, I went all-in and redesigned them in Fusion 360 (yeah, maybe a little overkill, but worth it). If you’d like a custom version with different text or even an image, just let me know and I’ll see what I can do!

Magnetic glasses holder — simple, strong, and support-free!

I designed this wall bracket specifically to store my Twister Arm Trainer and keep it out of the way when not in use. Two versions are included: a full-size, one-piece design for larger printers and a split version that prints in two halves for smaller beds. The split version comes with dowels for quick and easy assembly, allowing you to choose whichever setup works best for you. A practical and sturdy way to keep your trainer organized and ready to go!

I designed these print-in-place round cable organizers to keep cords neat and tangle-free. They come in three handy sizes—Small (20mm inner diameter / 30mm outer diameter), Medium (25mm inner diameter / 40mm outer diameter), and Large (33mm inner diameter / 50mm outer diameter)—so you can find the perfect fit for any cable. They print without supports and work great in PLA, but I recommend PET-G for extra strength and longevity. A quick, satisfying print that’s as functional as it is tidy!

I designed this magnetic washing machine door prop to keep the door slightly open between washes, helping prevent mold, mildew, and those musty smells. The built-in magnets make it easy to attach securely to your washer when not in use, and it quickly snaps into place when you need it. It’s a simple, effective solution for keeping your front-load washer fresh and well-ventilated without leaving the door wide open.

This wall mount was custom-designed in FreeCAD to securely hold the Bosgame Mini PC P4 Plus, keeping your workspace clean and clutter-free. It features a simple yet sturdy design that makes installation quick and easy. While it was made specifically for the P4 Plus, it may also work for other mini PCs with similar dimensions—just double-check your measurements before printing. A great solution for mounting your device out of sight and off your desk!

I designed these drink coins as a fun little gift for my brother — perfect for keeping the party going without saying a word! Each coin has a clever flip-side message so you can quietly let the bartender know when you're ready for another round. Whether it's "Beer me" or "Más tequila," just flip the coin and let the good times roll. They're a great conversation starter and a hilarious way to order drinks with style. Cheers!