Lycan Morphs

Average Dad Prints

Pokemon Card:<ul><li>Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.</li></ul>Arcanine 3D model:<ul><li>Print at 15% infill with 3 wall loops with a layer height of 0.08mm with a base layer of 0.16mm.</li></ul>&nbsp;All these are set within the print profile that I provided. I am open to feedback on the model as this is the first one I&#39;ve made that includes a 3D model extruding from the Pokemon card. I&#39;ve had some post-processing work to smooth out the supports around Arcanine.&nbsp;This was all printed using 1 AMS while swapping out different spools as they completed. You must assign the 3 extra colors to an existing AMS slot and then switch the color out once it completes. Or you can set a pause instead, but you will need to make those modifications.<ul><li>Black Filament swap to Orange</li><li>Green swap to Yellow</li><li>Blue swap to White  </li></ul>&nbsp;Credits to TheCraftyMaker for the frame: <a target="_blank" href="https://than.gs/m/999108" rel="nofollow noopener">https://than.gs/m/999108</a>Credits to etd_figurine for the Arcanine 3D model <a target="_blank" href="https://makerworld.com/en/models/484241#profileId-396576" rel="nofollow noopener">https://makerworld.com/en/models/484241#profileId-396576</a>&nbsp;Filaments Used:<ul><li>PLA SunLu Black Transmission Distance: 0.3</li><li>PLA BambuLab Basic Green Transmission Distance: 2</li><li>PLA BambuLab Basic Cyan Transmission Distance: 2</li><li>PLA Overture Red Transmission Distance: 4.8</li><li>PLA Sunlu Orange Transmission Distance: 5</li><li>PLA Overture Red Transmission Distance: 4.8</li><li>PLA BambuLab Basic Yellow Transmission Distance: 6</li><li>PLA Kingroon White Transmission Distance: 6</li></ul>&nbsp;Swap Instructions:<ul><li>Start with Black</li><li>At layer #13 (1.12mm) swap to Green</li><li>At layer #14 (1.2mm) swap to Cyan</li><li>At layer #16 (1.36mm) swap to Red</li><li>At layer #18 (1.52mm) swap to Orange</li><li>At layer #20 (1.68mm) swap to Red</li><li>At layer #21 (1.76mm) swap to Yellow</li><li>At layer #25 (2.08mm) swap to White for the rest.</li></ul>

Arcanine Oversized Pokemon Card (Hueforge)

hue forge

iprintshit

The Cornhole Caddy by Nofsky IndustriesProtect your backyard essentials with the Cornhole Caddy, A modular stand with adjustable height! The Cornhole Caddy is perfect for those nights in the backyard or on camping trips! It can be taken down  for storage and elongated for the most optimal spot! Hold 2 brews and your phone (plus more!) comfortably wherever you set up camp!&nbsp;Everything can fit on a single printbed (256x256x256) to make printing easy. The printed threads make for a painless tool free install! More parts coming in future updates! Download your own Cornhole Caddy today!&nbsp;Update 3-31-24<ul><li>Added Baseplate for flat surfaces! (new print profile and raw stl available)</li></ul>Update 4-4-24<ul><li>Fixed thread clearance issue on all parts.</li></ul>

The Cornhole Caddy

summer

Chase3d

Wanted to make an organizer for keychains that didn't take up much space and could be utilized for shows or store displays. This is stackable. You can use one cube that measure 8.5 x 8.5 inches on each side. There is also a bracket to place ontop to stack another cubicle. This Can be sat on a table as is or put on the base that can turn for easier access to all sides. Flat top to give space to use as a shelf or for signs. Petg is strongly recommended for anyone doing outside shows. Do not recommend resizing as it will change the peg size and distance

Spinning Peg Board Cubicle display

events

nicodeimos

Ring hole: 4.8mm.Model size: 32mm x 40mm x 3.2mm.Filaments: Bambu Lab Matte PLA (only 1 AMS needed).&nbsp;Please do not sell, copy, remix or distribute this model.<a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=G5FK3QJJUSW8N" rel="nofollow noopener">Enjoying my models? Make a donation!</a>&nbsp;Likes, comments and prints help to support me and will be very much appreciated!Feel free to <a target="_blank" href="https://makerworld.com/en/u/2495159158" rel="nofollow noopener">contact me</a> for any information.&nbsp;This 3D model is a unique custom-made version inspired by the work of Microsoft and any brand/studio/production/trademark associated with it. I do not take credit for the original drawing.

Minecraft Creeper keychain

Keychain 

3DPrintyi

Tips for printing:<ul><li>Supports: Yes (see pictures below)</li><li>Layer height: 0.16mm (optimal)</li><li>Wall loops: 3</li><li>Infill: 15%</li><li>Seam position: back</li><li>Wall generator: -</li><li>Detect thin walls: No</li></ul>Colors and filament I used (4 Color Version):<ul><li>PLA / Red - for the body</li><li>PLA / Black - for the eye, wings and feathers</li><li>PLA / White - for the eye</li><li>PLA / Orange - for the beak and feet</li></ul>Or decide for yourself which colors and how many you want to use!&nbsp;When you decide to print my multicolor Pre-Sliced (3mf file) for BambuLab I would recommend printing several models at once, not just one, to reduce waste!&nbsp;You will need supports for the beak! (See pictures below!)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000239987/design/2024-03-09_53a0563330b27.jpg"></figure>if you paint (Multicolor) my model, make sure that everything is painted correctly.See photos below:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000239987/design/2024-03-09_2b76665c4e78b.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000239987/design/2024-03-09_50e0be45acfb8.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000239987/design/2024-03-09_9c9c7c63b27c8.jpg"></figure><boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you enjoyed this model, please consider boosting it to support me to further develop creative and more cute looking designs🥰. Thank you!</boostcontent></boostme>Happy printing!

Cute Bird

animals 

CoNcLuZiOn

<h4>Bookmark - Wolf HUEFORGE</h4><h4>Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm</h4><h4>Swap Instructions: Start with Black At layer #17 (1.44mm) swap to Pink At layer #22 (1.84mm) swap to White for the rest.</h4>

Bookmark - Wolf HUEFORGE

bookmarks 

Lov3d

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA+ Sunlu Black Transmission Distance: 5.7 PLA+ Sunlu Grass Green Transmission Distance: 3 PLA+ Sunlu Silver Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions: Start with Black At layer #5 (0.48mm) swap to Grass Green At layer #9 (0.8mm) swap to Silver At layer #11 (0.96mm) swap to Jade White for the rest.

Mandalorian ART (HueForge)

star wars

B-Engineer

<h3>--------if you like my work please, follow me and spread some love giving some like and follow🙏---------</h3><h3>❤️For Akira Toriyama❤️</h3>--------------------------EngDear Akira Toriyama,I would like to pay tribute to you with this small magnet dedicated to you and to all your fans who, like me, have been deeply touched by your creations.The world you have created, populated by Goku and many other unforgettable characters, has inspired millions of anime and manga enthusiasts, conveying emotions, teachings, and limitless adventures.Your brilliant creativity will continue to resonate in the hearts of those who have experienced your works, uniting fans from all over the world into one community.Thank you for giving us a universe of extraordinary adventures and for teaching us that true strength resides in the heart.With deep respect and admiration,B-Engineer--------------------------ITCaro Akira Toriyama,Vorrei renderti omaggio con questa piccola calamita dedicata a te e a tutti i tuoi fan che, come me, sono stati profondamente toccati dalle tue creazioni.Il mondo che hai generato, popolato da Goku e da molti altri indimenticabili personaggi, ha ispirato milioni appassionati di anime e manga , trasmettendo emozioni, insegnamenti e avventure senza limiti.La tua geniale creatività continuerà a risuonare nei cuori di coloro che hanno vissuto le tue opere, unendo gli appassionati di tutto il mondo in un&#39;unica comunità.Grazie per averci donato un universo di avventure straordinarie e per averci insegnato che la vera forza risiede nel cuore.&nbsp;Con profonda stima e ammirazioneB-Engineer&nbsp;Remember to hit the like button and follow if you like my designs!<a target="_blank" href="https://buymeacoffee.com/b.engineer" rel="nofollow noopener">Buy me a coffee</a>&nbsp;&nbsp;The seat on the back is shaped to accommodate a 1mm thick magnet with a diameter of 10mm:<figure class="table" style="width:32.72%;"><table class="ck-table-resized" style="border:1px double rgb(179, 179, 179);"><colgroup><col></colgroup><tbody><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"><figure class="image image_resized" style="width:432.055px;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000240076/design/2024-02-27_f4880e557e492.gif"></figure></td></tr></tbody></table></figure>This model is simply resizable directly in Bambu Studio using the scale function as follow (Note that you must not modify Z axis dimensions and you could lose the magnet size form):<figure class="table" style="width:36.63%;"><table class="ck-table-resized" style="border:1px double rgb(179, 179, 179);"><colgroup><col></colgroup><tbody><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000240076/design/2024-02-02_09be8445bd691.gif"></figure></td></tr></tbody></table></figure>-If some stringing occour you can simply remove it using your lighter as follow:<figure class="table" style="width:55.56%;"><table class="ck-table-resized" style="border:1px double rgb(179, 179, 179);"><colgroup><col><col></colgroup><tbody><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"><figure class="image image_resized" style="width:312.811px;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000240076/design/2024-01-21_8dcebcac75c51.gif"></figure></td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000240076/design/2024-02-23_a13f99f46364e.png"></figure></td></tr></tbody></table></figure>Use the flame for only few seconds and you will be surprised by the result! from left to right picture like magic😄--------------------------------------------------------------------------------------------------------------------------------HUEFORGE Instructions:Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions: Start with Black At layer #22 (1.84mm) swap to Orange At layer #27 (2.24mm) swap to Jade White for the rest. I used Textured pei plate, if you have a different one you should change it in settings when print thisYou can also use different colors, you only need to respect layer height instructions&nbsp;&nbsp;If you want any modifications or variations, feel free to ask, if you have specific requests write to me privately, and I will do my best to fulfill your desires❤️

Akira Toriyama & Goku - Magnet

magnets

palumbus

You have to change the color at layer 5 (manualy or with AMS). I also have uploaded a print profile for A1 Mini, which is not tested.

Wall Art: Cute Baby Highland Cow (1 filament-change needed)

wall art

lego

NUKDDD

Legend says that some chickens and bunnies had babies and that's where these adorable little hole-y eggs came from. People would go hunt for these eggs every spring, thus came the holiday called Easter…I made that up, it's actual about a bunny waking up after a long nap and losing the race to the tortoise and became an egg.&nbsp;Please give a 👍 if you like it, even if you don’t download it, it’ll help others discover it 😊Commercial rights available for all my designs at <a target="_blank" href="https://www.patreon.com/NUKDDD" rel="nofollow noopener">https://www.patreon.com/NUKDDD</a>&nbsp;These eggs will look great day and night by themselves or next to other decors.&nbsp;<a target="_blank" href="https://shrsl.com/4gf88" rel="nofollow noopener">Designed to fit Bambu Lab's Lamp Kit, available in the online shop.</a>&nbsp;Printed with Bambu's <a target="_blank" href="https://shrsl.com/4gfvl" rel="nofollow noopener">Basic</a> and <a target="_blank" href="https://shrsl.com/4gfae" rel="nofollow noopener">Matte PLA</a>&nbsp;No support, easy assembly, big one compatible with Bambu Lamp Kit 001 and small one for tea lights up to 40mm in diameter. Standard setting, except for the bases, they all have fuzzy skin turned on, default setting. You can support me by using my affiliate link to purchase <a target="_blank" href="https://amzn.to/3PxD8HO" rel="nofollow noopener">the LED candle</a> I purchased in my video and photos. I may earn a small commission.&nbsp;All you need is to bring your own light, nothing else is needed, like most of my designs. Check them out in my profile!&nbsp;Disclaimer: This model is part of the Creator Program, When you purchase the Lamp Kit 001 or filament through the links provided, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to public.)

Easter Bunny Egg Lamp 

tea lights

NotTooShabbyCreations

Pokemon inspired wall mounted Pikachu light.For this light I used a USB wire with inline switch and dimmer, and cool white 5v LED strip.

Pikachu lightning light box

lightbox

星骸造物-StarK

御神兽-螭龙  Chinese dragon-《Chi》

dragon

cartyski

A bullet that functions as a stash container.

Bullet Stash Container

stash

austin.colby

After seeing all the cool Valentine's Day ideas on makerworld, it seemed like our faithful companions were left out. I took some inspiration from other folks who were creating these really cool string art pieces and worked on something special for our four-legged friends. This is a small piece - only about 120 mm x 120 mm total - but it is something that you can have fun printing and learning about how string art is created. As a bonus - I have uploaded the raw step file so you can see the method behind my madness. That said, I am not a professional designer and only pretend to know how to use Fusion360. Hopefully, this will help some out with the magic behind how string art is created. Please feel free to message me if I messed something up. I will also post the original file without the paw print in case anyone wants to give it a shot with their own object.&nbsp;A couple of things to note:<ol><li>I have spent most of the day printing multiple models and fine-tuning the Bambu printers' settings. I used my A1 because I figured that the X1 would have knocked it out of the park anyway,</li><li>DO NOT RESIZE IT - I've made that mistake. The strings are precisely .2mm square, and the very second you scale it, it's all over.</li><li>Feel free to reach out and ask questions. I'm new to this and can try my best to answer and had a fun time with this project.</li></ol>I'm not the best at creating videos but just in case anyone is interested, I have posted a quick video on youtube behind the design:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=oeEQEjds-7A"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/oeEQEjds-7A" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Puppy Love Paw Print Valentines Day String Art

strimg art

Unknownnn

Embrace the world of Naruto with this striking 3D model of the Akatsuki logo keychain. &nbsp;Show your allegiance to this mysterious and powerful organization with a meticulously crafted, high-quality keychain. &nbsp;The iconic Akatsuki logo is faithfully recreated in this design, making it the perfect accessory for Naruto fans and collectors.&nbsp;This keychain is not only a symbol of your love for the series but also a practical and stylish way to keep your keys organized. Attach it to your keys, bag, or backpack to carry the Akatsuki's mystique with you wherever you go.&nbsp;Download this 3D model now and showcase your affiliation with the Akatsuki in style.

Akatsuki Keychain - Naruto

keychain

wallcrawler62

This is a set of leaning bottle holders designed to fit in the drawer of the Harbor Freight Yukon workbench. They will hold Army Painter and Vallejo miniature paint bottles. The drawer I designed them for is approximately 18" L x 20" W x 2.5" T. These holders will fit in any drawer that is 2.5" tall or taller. I've included a model that is 4x4 for easy printing to hold 16 bottles, as well as the single holder that can be copied and arranged to print any size you may need. They also work well for keeping your paint organized while you're painting and not falling all over in different spots in your work area.

Army Painter and Vallejo Drawer Based Bottle Holders for Harbor Freight Yukon Workbench

painting

GekoPrime

I tried another spool winder but found it finicky and delicate.I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable windersWhy pick this model:<ul><li>Prints on a single build plate</li><li>Doesn't require heat set inserts or exotic hardware</li><li>Fusion and STEP files are available, remixes welcomed</li><li>Generous clearances, simple mechanisms</li><li>Designed to be a tool, not a project</li></ul>Print time:<ul><li>~500 grams of filament</li><li>~22 hours on Bambu Lab X1</li><li>~5 minute assembly</li><li>~2 minute spool transfer</li></ul>Hardware requirements:<ul><li><a target="_blank" href="https://www.amazon.com/s?k=608+bearings" rel="nofollow noopener">14x 608 skate bearings</a></li><li>A scrap of PTFE tubing</li><li>An electric screwdriver or drill with <a target="_blank" href="https://www.homedepot.com/p/DEWALT-MAXFIT-3-5-in-2-Philips-Bit-DWA3PH2MF/309474882" rel="nofollow noopener">a bit cut from ¼ inch hex stock</a> (most <a target="_blank" href="https://www.amazon.com/ITP1201-SCRWDRVNG-2IN-1-IMPAC/dp/B01LZZ7AOS/" rel="nofollow noopener">cheap quick change Philips bits</a> in the US fit this requirement)</li></ul>Print settings:<ul><li>Any. I used "0.16mm Optimal" in BambuSlicer with 5% adaptive cubic infill </li><li>Use 100% concentric infill for spindle_male_driven</li><li>Try the STLs if you have a problem with the 3mf files. I’ve added (xN) to each file name so you know how many to print</li></ul>Materials:<ul><li>Any. I used Polyterra and iiidmax PLA+</li><li>Use TPU for tpu_consumable_wiper_blade. I used Priline 98a. The wiper blades aren’t 100% required but they help keep the windings nice and tight</li></ul>Assembly and usage:<ul><li><a target="_blank" href="https://youtu.be/DxgkYDrRK-U" rel="nofollow noopener">Demo video</a></li><li><a target="_blank" href="https://youtu.be/-Hy69YwRLBw" rel="nofollow noopener">Assembly video</a></li><li>The side that says “Pastamatic" needs to face outwards, away from the spool</li><li>The filament needs to come in under the target spool, like this: O____O<ul><li>[not like this: O‾”‾”‾”O]</li></ul></li><li>The drill/driver needs to run clockwise, as though you're screwing something in</li><li>Accelerate slowly until the winder gets started</li></ul>Change log<ul><li>2023-05-28<ul><li>Initial release</li></ul></li><li>2023-05-29<ul><li>Fix a minor export glitch in "leadscrew_tooth"</li><li>Increase the number of “pin_short” instances in the 3mf from 6x to 8x</li></ul></li><li>2023-05-30<ul><li>Add a second prearranged 3mf with two plates to avoid overlap warnings</li><li>Disable autogenerated brims for the single plate 3mf </li><li>Add STLs for people who have trouble with the 3mf</li></ul></li><li>2023-06-03<ul><li>Add a ring to passive_target_cradle to prevent the far end of the target spool lifting if a user lets the the drill hang loose</li><li>Add a pin to driven_target_cradle prevent the leadscrew popping out</li><li>Fix a minor clearance issue where a dovetail didn't fit quite right</li></ul></li><li>2023-09-30<ul><li>Reduce chamfer on the crossbars to prevent them falling over when bed adhesion is poor</li><li>Add some holes to the crossbars to make them easier to screw down</li><li>Add some popular acessories to the all-in-one .3mf</li><li>Add a printable spool to the all-in-one .3mf</li></ul></li></ul>How to contribute:<ul><li>Post your make, it keeps me motivated to improve the model when I see people using it!</li><li>Post your feedback, idea or remix in the comments!</li><li>There are a few improvements and accessories in development as remixes, check those out if you‘re up for the alpha/beta tester experience<ul><li><a target="_blank" href="https://www.printables.com/model/498743-pastamatic-37-mm-motor-mount" rel="nofollow noopener">Adapter for 37mm gear motor</a></li><li><a target="_blank" href="https://www.printables.com/model/556405-pastamatic-filament-spool-winder-modifications-bra" rel="nofollow noopener">Source spool holder for 5 KG spools</a></li></ul></li></ul>Credits:<ul><li><a target="_blank" href="https://www.printables.com/@MiklosKiszely_486882" rel="nofollow noopener">@MiklosKiszely_486882</a> for the original idea</li><li><a target="_blank" href="https://www.printables.com/@PsychoShaft_33891" rel="nofollow noopener">@Psycho Shaft</a> for the drag/tensioner concept</li><li><a target="_blank" href="https://www.youtube.com/@thang010146" rel="nofollow noopener">thang010146</a> for YouTube videos of mechanical mechanisms, particularly the self reversing leadscrew for a level cable winder</li></ul>&nbsp;

Pastamatic  Filament Spool Winder for Bambu X1C/P1P AMS (level winder with self reversing leadscrew)

printer mod

Picture_it

This fits a 40oz Stanley Cup lid. It's blank, but if you open it in Bambu Studio, then near the top right click on the T for text. You can choose your font, font size and text to add to the topper. Choose object on the left, then choose the colour of your topper and writing. If you don't have an AMS, just do a filament change either by watching, Or, once sliced, slide the bar on the right down until you see what layer the text begins. Right click, then add pause. Then re-slice. The machine will pause for you at that layer so you don't have to watch.

Customizable Blank Stanley Cup Lid Topper

cups

andrea.coffetti

I bought a 3D printer to increase my manufacturing outputs. The files shown are molds for pouring the appropriate silicone mold and finally creating your own bait. I hope you like them.

WTD 70

fishing 

Tactical Kaoz

Once printed you will need to glue both parts and insert the spur gear in the middle while also inserting filament through the holes. I melted the ends so they are flush.

Croc Spur Gear Cowboy Crocs

crocs accesories

Extrutim

I wanted to have a test print which I can use to test the dimensional accuracy of my printer and the print quality of my filaments. But it should also be pretty enough to keep as a color sample afterwards. So I created this 30x30x30 mm cube which contains several functions.&nbsp;The print takes a bit less than 1.5h.&nbsp;Below are pictures from which you can take some measurements to check your cubes for dimensional accuracy.&nbsp;You can check the following properties on this cube: - stringing - bridging (are the bridges over the letter clean, including the large area inside?) - ghosting / ringing - overhangs - dimensional accuracy in all axes - first layer height (is the logo clearly visible on the underside, are there holes in the narrow areas?) - Was the helix printed neatly with a single wall line? - Are there problems with the Z-seam due to the many retraction? - Was the Z printed neatly on the top?You can also try breaking out the Y, if that is too easy you may have to reduce the cooling or increase the printing temperature.&nbsp;Note: Since some people with a nozzle larger than 0.4mm had the problem that the slicer did not slice the Helix (minimum wall thickness for slicing) I added versions for 0.6mm and 0.8mm nozzles.&nbsp;If you like this project, check out <a target="_blank" href="https://www.printables.com/social/38556-extrutim/models?o=download_count" rel="nofollow noopener">my other designs</a> too!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3843932834/draft/2023-09-24_9d5e5e2ac30f6.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3843932834/draft/2023-09-24_d142138e43665.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3843932834/draft/2023-09-24_8afa3122c8a95.png"></figure>

Helix Test Cube / Filament Sample / XYZ Calibration

test obj

ald5096

This is a taco holder that holds 3 tacos upright. Print in a food safe filament and use 100% infill. They also stack!

Taco Holder !!!!!!!

food

cats

Iulian3D

Hello,&nbsp;New beginner here of 3D comming with a p1p frame.Is already painted and ready to be printed <3&nbsp;Happy Printing !<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/286821/2023-11-19_573c2ed23425b.png"></figure>

P1P / P1S Christmas Frame 

christmas

KubiV_

Car holder for French fries with McDonald's in mind.

Car Holder for Fries

car items

Encrust3d

This is a remix of a origami crane from thingiverse to add two holes in the model so it can be hung as an ornament or any other application. Holes were added at 90 degree intersections so it can be hung from any angle you would like. This model prints without the need for any supports. Fusion 360 was used to remix the model. &nbsp;If you like this model, check out the Origami Rabbit: <a target="_blank" href="https://makerworld.com/en/models/98647#profileId-105179" rel="nofollow noopener">https://makerworld.com/en/models/98647#profileId-105179</a>&nbsp;and the Origami Tortoise: <a target="_blank" href="https://makerworld.com/en/models/98663#profileId-105199" rel="nofollow noopener">https://makerworld.com/en/models/98663#profileId-105199</a>

Origami Crane

toys ect

Dadtaxes3D

Made this in 5 minutes on blender. Prints in place

Controller stand

gaming 

braga3dprint

The "Skull" keycap is a bold and edgy design that is sure to add a touch of personality to any keyboard. This 3D printed keycap model features intricate details and a sleek design that captures the essence of the classic skull symbol. Check out the latest video on my channel featuring this 3D printed skull keycap, the ultimate upgrade for your keyboard! The file used in the video is keycap_skull_v6.stlAlthough my print of the keycap skull may appear lackluster due to my budget printer (90€) and cheap filament (10€/Kg), by slowing down the speed and using a Prusa printer, you are likely to achieve much better results.&nbsp;It is available in many different versions, so you can find the perfect fit.New RGB version (keycap_skull_v7_RGB):<figure class="image"><img src="https://media.printables.com/media/prints/394839/rich_content/e7d6fe2e-4f0c-4bd8-826c-67101ad96d42/thumbs/cover/800x1067/jpg/psx_20230212_171051.webp"></figure>Additionally, the keycap skull design is also available in a low poly option for those who prefer a more minimalistic look.To achieve the best results with your print, it is recommended to use a nozzle size of 0.4mm or smaller and set the layer height to the lowest possible, at 0.1mm or lower. For the highest level of detail, resin printing is the recommended method. Additionally, due to the complex nature of the design, it is important to use supports during the printing process.Consider showing your support by liking, downloading, and sharing this unique keycap design.&nbsp;&nbsp;A special thanks to:<ul><li>Thank you to <a target="_blank" href="https://www.thingiverse.com/rsheldiii" rel="nofollow noopener">rsheldiii</a> the designer of the <a target="_blank" href="https://www.thingiverse.com/thing:2783650" rel="nofollow noopener">parametric keycap model</a>.</li><li>Thank you to <a target="_blank" href="https://www.printables.com/social/262129-fragaile" rel="nofollow noopener">Fragaile</a> the designer of the <a target="_blank" href="https://www.printables.com/model/188979-flat-keycap-cherry-mx" rel="nofollow noopener">Flat keycap (Cherry MX)</a>.</li><li>Thank you to <a target="_blank" href="https://www.printables.com/social/533-bugman_140" rel="nofollow noopener">Bugman_140</a> the designer of the <a target="_blank" href="https://www.printables.com/model/5988-skull-scar" rel="nofollow noopener">SKULL - SCAR</a>.</li><li>Thank you to <a target="_blank" href="https://www.thingiverse.com/slavikk" rel="nofollow noopener">slavikk</a> the designer of the <a target="_blank" href="https://www.thingiverse.com/thing:906562" rel="nofollow noopener">Low Poly Skull</a>.</li><li>Thank you to <a target="_blank" href="https://www.printables.com/social/13168-peter-from-belgium" rel="nofollow noopener">Peter from Belgium</a> the designer of the <a target="_blank" href="https://www.printables.com/model/2770-human-skull-anatomically-correct" rel="nofollow noopener">Human skull, anatomically correct</a>.</li><li>Thank you to <a target="_blank" href="https://www.thingiverse.com/LegendaryWolf43" rel="nofollow noopener">LegendaryWolf43</a> the designer of the <a target="_blank" href="https://www.thingiverse.com/thing:4856861" rel="nofollow noopener">Outemu / Cherry MX</a>.</li></ul>Without these talented creators, this remix would not have been possible. Shoutout to these awesome creators for their contribution to the 3D printing community!

Skull Keycaps

computer

garrettalansmith

Introducing the Bow Style Sander – your tool for delicate project polishing! This sleek bow ensures swift and efficient finishes on all your creations.&nbsp;What You'll Need:<ul><li>Sandpaper</li><li>Four (4) M3 x 8mm Screws (Thanks <a target="_blank" href="https://makerworld.com/en/u/41849858" rel="nofollow noopener">nimmesota_3D</a> for the hardware update!)</li><li>Your masterpiece in need of a softer sandpaper touch</li><li>A dash of patience</li></ul>Simple Installation: Squeeze the bow during sandpaper installation for just the right tension. Experiment with the squeeze for different effects – soft for highly curved surfaces, tight for use like a sanding sponge.Gently poke the holes with an Allen wrench to kickstart the screws. The design ingeniously uses sandpaper as friction, ensuring a snug fit without over-tightening. Versatile Design: Explore the small flats on either side for flashing lines or areas requiring more rigidity behind the sandpaper. The corners are perfect for tackling those tricky, hard-to-reach spots, too – no need to change tools as frequently.&nbsp;Latest Update - 12.30.23: New sandpaper templates in different widths, a suggestion from nimmesota_3D. The new 20mm, 10mm, and 5mm templates are available <a target="_blank" href="https://makerworld.com/en/models/115868#profileId-124528" rel="nofollow noopener">here</a>!.Check out my other FREE models <a target="_blank" href="https://makerworld.com/en/u/4019373707" rel="nofollow noopener">here</a>!

Sanding Bow

tools

Howell

This is an optimized version of Mandalorian Helmet for people with slight bigger head or nose (like me :) )It is scaled 1,20% bigger and still mantain optimized supports.Print speed are 300 mm/s for all internal a slower for external, I suggest to turn off AUX fan or just put slow to avoid any kind of parts with different aesthetic results.Attached are file to print it in separate parts and optimized 3MF for the accessories (speed have been slowered down due to side parts fallen down when using creator profile).&nbsp;This is the way!&nbsp;FYI: PLA is from Azurefilm, Silk Graphite Grey&nbsp;&nbsp;Update 10/21/2023: Added Print profile for accessories

Mandalorian Helmet - Big size 

cosplay

donutgab777

Flower and Plant vase &nbsp;

Spiral vase

garden or plants

ME STUDIO

🎉 Kids Version: <a target="_blank" href="https://makerworld.com/en/models/99723#profileId-106322" rel="nofollow noopener">Link</a>&nbsp;<h2>Introducing the 2024 Happy New Year Party Glasses 🎉🎉🎉</h2>&nbsp;Get ready to celebrate every New Year, Christmas, and birthday party with your incredible party glasses design. We're making for the coolest and most versatile designs that will bring joy and style to all partygoers, both young and old.&nbsp;Key Features :&nbsp;🎉 No Support: Create party glasses that stand out from the crowd with their unique design. Say goodbye to traditional supports and let your creativity shine.&nbsp;🔩 No Screw: Challenge the norms of conventional glasses design. Craft glasses that require no screws for assembly, ensuring a seamless and sleek look.&nbsp;🔄 Reusable Design: Unleash the creativity by designing glasses with a reusable concept. Let users change the text, lens, and temples' size, giving them the freedom to customize their glasses for different occasions.<figure class="image image_resized" style="width:70.19%;"><img src="https://makerworld.bblmw.com/makerworld/draft/514465/2023-12-12_51df56d7b2e87.gif"></figure>GIF image for texts installation&nbsp;&nbsp;&nbsp;📦 Easy to Fold and Unfold: Convenience is key! Develop glasses that can be effortlessly folded and unfolded, making them compact and easy to carry.<figure class="image image_resized" style="width:70.84%;"><img src="https://makerworld.bblmw.com/makerworld/draft/514465/2023-12-12_d63560eec66e5.gif"></figure>GIF image for temples installation&nbsp;&nbsp;&nbsp;🔗 Easy Assembly: Simplify the process of joining the lens, temples, and text. Our design should make it a breeze for users to assemble their glasses, ensuring a hassle-free experience.&nbsp;<figure class="image image_resized" style="width:70.74%;"><img src="https://makerworld.bblmw.com/makerworld/draft/514465/2023-12-12_c10879b071b39.gif"></figure>GIF image for lens installation&nbsp;&nbsp;&nbsp;👧🧑 Design for All Ages: Create glasses that are suitable for both adults and children. Your design should be versatile, comfortable, and stylish, catering to wearers of all ages.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/514465/2023-12-12_40adf5f7acd15.jpg"></figure>Temples' size image   ***&nbsp;Copyright:All my designs are protected by copyright. By downloading, you agree to use the files for personal purposes only. This means that you do NOT have the right to sell 3D prints of the digital files, including selling products made from molds.If you want to sell my prints commercially and legally, you can join my Patreon:<a target="_blank" href="https://www.patreon.com/MESTUDIO" rel="nofollow noopener">https://www.patreon.com/MESTUDIO</a>&nbsp;The digital files (STL and other formats) may never be resold, shared, remixed or given away. Happy printing!&nbsp;***&nbsp;&nbsp;LOVE THIS DESIGN?You might also like my others:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/514465/2023-12-12_c792206b38321.jpg"></figure>&nbsp;2024 Happy New Year Party Glasses (Contains glasses frame, temples, Happy New Year style's lens and texts) :<a target="_blank" href="https://makerworld.com/en/models/90795#profileId-97152" rel="nofollow noopener">https://makerworld.com/en/models/90795#profileId-97152</a> Merry Christmas Party Glasses (Christmas style's lens and texts only, No glasses frame, and temples) :<a target="_blank" href="https://makerworld.com/en/models/90787#profileId-97147" rel="nofollow noopener">https://makerworld.com/en/models/90787#profileId-97147</a>&nbsp;Happy Birthday Party Glasses (Birthday style's lens and texts only, No glasses frame, and temples) :<a target="_blank" href="https://makerworld.com/en/models/90770#profileId-97126" rel="nofollow noopener">https://makerworld.com/en/models/90770#profileId-97126</a>&nbsp;Red White Blue Edition Party Glasses (RWB edition style's glasses frame, temples and lens) :<a target="_blank" href="https://makerworld.com/en/models/90783#profileId-97141" rel="nofollow noopener">https://makerworld.com/en/models/90783#profileId-97141</a>&nbsp;&nbsp;&nbsp;

2024 Happy New Year Party Glasses

jewelry or apparel 

cyanidesugar

The third in the 'Oversized Pokemon Card' collection, I present to you Bulbasaur! This Hueforge hybrid printing method combines filament painting and traditional 3D printing to create a 'hybrid' piece that has a 'pop out' feature in the print.&nbsp;This model complements the <a target="_blank" href="https://than.gs/m/956825" rel="nofollow noopener">Oversized Pikachu</a> and <a target="_blank" href="https://than.gs/m/963194" rel="nofollow noopener">Oversized Squirtle</a> HueForge hybrid cards.&nbsp;If you are using a Bambu printer, or Bambu Studio, the included 3MF file will already have all the settings applied to the print, including the colour swaps and print settings for the hybrid part of the model. Otherwise, use the STL file with the following print settings:&nbsp;For the HueForge part of the print (0mm-2.16mm)<ul><li>Print with 100% infill, at 0.08 mm layer height, with a base layer height of 0.2mm</li></ul>For the Bulbasaur (2.16mm - 40.12mm)<ul><li>Print with 5% infill, at 0.16mm layer height - I used Gyroid infill</li><li>2 walls, 3 tops and 3 bottoms. I also opted to use the Concentric pattern as a top surface</li><li>Note: You can use whatever colour you want for Bulbasaur depending on your preference!</li></ul>Filament Swap Instructions Filaments Used:<ul><li>PLA Kingroon Black Transmission Distance: 0.4</li><li>PLA BambuLab Basic BambuLab Green Transmission Distance: 8</li><li>PLA CC3D Lemon Yellow Transmission Distance: 8</li><li>PLA Kingroon White Transmission Distance: 8</li></ul>Swap Instructions:<ul><li>Start with Black</li><li>At 1.00mm swap to BambuLab Green</li><li>At 1.40mm swap to Lemon Yellow</li><li>At 1.56mm swap to White</li><li>At 2.04mm swap to Lemon Yellow</li><li>At 2.36mm swap to BambuLab Green (For Bulbasaur, but you can use whatever colour you want, honestly!)</li></ul>Post Processing You will need to paint Bulbasaur! I used paint pens to make it easier :)&nbsp;I used <a target="_blank" href="https://www.thingiverse.com/thing:1690811" rel="nofollow noopener">this super cute Bulbasaur model</a> by <a target="_blank" href="https://www.thingiverse.com/hexhyte/designs" rel="nofollow noopener">HexHyte</a> for this hybrid!&nbsp;___________________________________________If you'd like to support me, I now have a <a target="_blank" href="https://patreon.com/cyanidesugar3dp" rel="nofollow noopener">Patreon</a>! Joining will give you behind the scenes information on WIPs, access to a private discord, early access AND exclusive models! If you want to sell any physical models I have uploaded anywhere, an unrestricted commercial license is available on the $10AUD tier of my Patreon!___________________________________________

Oversized Bulbasaur Pokemon Card - HueForge Hybrid Print

pokemon 

YeetYeet

Compound crossbow made primarily out of 3D printed parts. This is not a toy. Crossbow had measured 70 lbs of force, but this depends on the amount of tensioning and used PETG strength.BOM and instructions are in the provided pdf assembly manual. I would recommend reading the pdf before starting this project.All bolts used are Hex socket head (DIN 912) The crossbow has picatinny rail which can be used to mount a scope. Feel free to use the provided .step file to create new improvements and accessories. If you want to support me: <a target="_blank" href="https://www.buymeacoffee.com/yeeterinofuckerino" rel="nofollow noopener">☕Buy me a coffee</a> BTC: bc1qnh6fvegp45zzy8gw5elg0heyrgq5rjuxpa5al0

70 lbs Compound Crossbow

weapons 

Ming Yao

This hook is designed as an upper and lower hook. The upper hook is larger and the lower hook is smaller. It is suitable for hanging coats and keychains that are often used when going out. You can hang them at the desired height or position as you like.