Luke3D

enricoRE

Sunflower Puzzle 200x200 print in placeHello my friends, this is a real sunflower print in place puzzle.I hope you like it.Follow filament swap settings below.Thank you so much.&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Green At layer #10 (0.88mm) swap to Orange At layer #20 (1.68mm) swap to Yellow for the rest. Don&#39;t scale Z height

Sunflower Puzzle 200x200 print in place

puzzle

Anthony_323

This is a 2D model for decoration, I've included a 3mf and stl's in the zip. Don't forget to place it face down on your build plate for better results.

GhostBusters Logo 

todo

capsel22

Quick print of a PTFE clip which goes on the cable chain. Prevents the tube hitting the top glass or ams etc.&nbsp;Printer 0.2 layer heigh with 3 walls. Suggest printing it with PETG at minimum.&nbsp;It's designed to be tight fit. I found other designs to have either the PTFE cut out too large and the tube would come out or the lips holding the cable chain to be too small, and it clips off.&nbsp;To fit it, insert the top first onto the cable chain.

puzzle

todo

stampante