Piratebear

ABDELat

Fast and easy to print Gridfinity Base for <a target="_blank" href="https://www.ikea.com/at/en/p/alex-drawer-unit-white-00473546/" rel="nofollow noopener">Ikea Alex Drawer (36x70 cm)</a>. The printfile contains 5 plates with all necessary parts for 1 drawer.If your looking for bins, I&#39;ve an <a target="_blank" href="https://makerworld.com/de/models/47599" rel="nofollow noopener">ultimate collection</a> for that.<ul><li>Plate 1<ul><li>Grid 4x5</li><li>23x Connector (22 needed + 1 spare) optional</li></ul></li><li>Plate 2<ul><li>Grid 4x5</li></ul></li><li>Plate 3<ul><li>Grid 3x5</li><li>Grid 2x4</li></ul></li><li>Plate 4<ul><li>Grid 3x5</li><li>Grid 2x3</li></ul></li><li>Plate 5<ul><li>Spacer</li></ul></li></ul>PLA printtime: ~3:55h and 116,9g material (single color)PETG printtime: ~4:25h and 115,0g material (single color)&nbsp;I recommend to put the 2 small grids and the spacer in the back of the drawer.The grid can be printed in PLA or PETG. I recommend 0.4mm nozzle and 0.2mm layer height.&nbsp;Additional Tools and Helpers<ul><li><a target="_blank" href="https://makerworld.com/models/208796" rel="nofollow noopener">Gridfinity Height ruler - slim Edition</a>: Helps you to find the correct bin height.</li><li><a target="_blank" href="https://makerworld.com/en/models/476336" rel="nofollow noopener">AIO parametric Gridfinty Project</a>: Generate you own gridfinity bin.</li><li><a target="_blank" href="https://makerworld.com/en/models/28581" rel="nofollow noopener">Slim Gridfinity Base for Ikea Alex:</a> Perfectly fitting grid for Ikea Alex Drawer</li></ul>&nbsp;Source: <a target="_blank" href="https://www.printables.com/model/430144-gridfinity-base-with-snap-connectors" rel="nofollow noopener">Gridfinity Base</a> <a target="_blank" href="https://www.printables.com/model/535032-gridfinity-ikea-alex-spacer-with-snap-connectors" rel="nofollow noopener">Spacer</a>&nbsp;<h4>A1 mini Edition:</h4>I&#39;ve included a profile for all A1 mini user out there. Basically you&#39;ll need three 4x4-Grids and three 3x4-Grids. The Spacer is cut in half, so it fits the print plate. You don&#39;t need to glue them together. Just use some connectors. The connectors are optional. You just need them if you don&#39;t fill the drawer space all with bins.<h3>Share your makes and support me</h3>If you like my work, give it a 🚀 boost 🚀 (the button is right below the Download). You can <a target="_blank" href="https://brickbank.app/support/" rel="nofollow noopener">support me here</a>, via <a target="_blank" href="https://ko-fi.com/brickbankapp" rel="nofollow noopener">Ko-Fi</a> or <a target="_blank" href="https://patreon.com/brickbankAPP" rel="nofollow noopener">Patreon</a>. Please leave a comment or share your makes 😁.  I appreciate your support! If your interested in selling the printed models DM me.

Slim Gridfinity Base for Ikea Alex Drawer

Gridfinity 

Makefy

It's planting season!<blockquote> TIP: Use a cotton pad in the bottom of each pot to keep the dirt from spilling into the bottom tray! &nbsp;</blockquote>&nbsp;This is a new version of a design I made and tested last season. Turned out to work great.The assembly consists of the following parts: Bottom Tray: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_52bc4f5b6a06.png"> This is the main part which holds water. It has guides for the pots and slots for the connecting beams. It should have enough solid bottom layers to avoid any infill. Just to make sure it's completly watertight.&nbsp;Connecting Beam: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_ab0b1e814f06f.png"> This is the part that supports the top plate. You will need 4 of these &nbsp;Pot: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_fb839ee86539c.png"> This is the pot itself. It consists of two parts that snap together. PLA seems to hold up pretty good for this part, but PETG or ABS might be a better choice. Top Plate: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_df2f64c41e23d.png"> This parts connects to the bottom tray with the four beams and holds the pots Greenhouse Dome: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_66dfe67204146.png"> This is a clear cover which provides a warm and humid environment for the seedlings. This part is provided in a separate print profile and should be printed in clear PETG or PC: — OPTIONAL --- Dirt Funnel: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_5f6384536a117.png"> The funnel makes it easier to fill the pots with dirt The Pestle: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_2ac2891fe5821.png"> Use this to gently pack the dirt.

Self Watering Seed Starter/Planter with Splittable Pots and Greenhouse Dome

botanic 

ralf.hoerhager

<a target="_blank" href="https://www.printables.com/de/model/418290-sanding-wedge-v2" rel="nofollow noopener">Printables Link</a>&nbsp;General informationAs you might have guessed from the title, this is the 2nd version of my sanding wedge. I made the models in Autodesk Inventor. &nbsp;The new design is Fully 3d printed, no bolts or nuts needed.&nbsp;Technical detailsThis sanding wedge is made for 50mm wide sandpaper. The sandpaper must be at least 310mm long for the original version and 225mm for the small version.I recommend you buy a roll of Sandpaper that already has the desired width and then cut it to length.&nbsp;Here are some I found on Amazon: <ul><li><a target="_blank" href="https://amzn.eu/d/5q3raSU" rel="nofollow noopener">Bosch DIY Sanding Roll for Metal 50mm 5m 120 Grit </a></li><li><a target="_blank" href="https://amzn.eu/d/gXm8hH8" rel="nofollow noopener">Klingspor 4224 - KL 361 JF Sanding Rolls with Fabric Backing, Brown, 50 x 25000, Packaging Unit 1 - Grain 180</a> </li></ul>&nbsp;Update 11.10.2023 : I added a brim and spread it over more plates to reduce printing errors. Also made the hole in the "wedge" bigger because it was too tight.

Sanding Wedge V2

tools 

mklements

This enclosure is designed to house a Raspberry Pi 5 and the Radxa Penta SATA Hat to build a desktop NAS.&nbsp;There are two primary options, leading to four variants.<ul><li>With or without an acrylic window - this adds to the design aesthetic but may be difficult to make up without the correct tools</li><li>With or without holes for brass inserts - if brass inserts are not used, the holes are sized for M2.5 screws to be used directly</li></ul>Visit my blog for the full parts list with suggested purchase links and the assembly and setup guide - <a target="_blank" href="https://www.the-diy-life.com/i-built-a-4-bay-raspberry-pi-5-based-nas/" rel="nofollow noopener">https://www.the-diy-life.com/i-built-a-4-bay-raspberry-pi-5-based-nas/</a>

Raspberry Pi 5 Four Bay NAS

projects 

portela237

This is a great way to display your safety razors without taking up valuable counter space in your bathroom.  Attach this to your wall with a 3m command strip and hang your safety razors on the wall.  The ring is wide enough to fit most safety razors including the classic Fatboy and modern Merkur 34.

safety razor holder

useful 

2emme3dlab

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA Eryone Black Transmission Distance: 0.3 PLA Eryone Red Transmission Distance: 5 PLA Eryone Orange Transmission Distance: 5 PLA Eryone Yellow Transmission Distance: 5&nbsp;Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #11 (0.96mm) swap to Orange At layer #17 (1.44mm) swap to Yellow for the rest.

Fire evolution Hueforge

Hueforge 

ddf3d.com

<div><h1>Summary</h1><div>Bubble Bubble Bubble makers <hr>provide 3 different type of bubble you can choose and make from it. It's works very well with bubble water made from dish soap mix with water by around 1:1. My daughter really like play with. Hope you will like it. Enjoy ;)</div></div>

Bubble Bubble Bubble makers

kids 

IK3Digital

Adorable Chubby T-rex pencil holder that prints super easy and quick as it needs no supports at all.&nbsp;I recommend at least 2 walls and 12% infill.&nbsp;All of my models are for personal use but if you would like to sell them physically you can subscribe to my Patreon to get a commercial license, free models every month and a welcome package: https://www.patreon.com/IK3D &nbsp;&nbsp;

Chubby Dinosaur T-Rex Dino Pencil Holder 

funny 

MatejB

Desicant container for Bambu spools.<ul><li>Added clips that allows the container to be fit inside spool. There is separate clip for stock Bambulab spool and for<a target="_blank" href="https://wiki.bambulab.com/en/knowledge-sharing/bambu-reusable-spool" rel="nofollow noopener"> 3D printed spool.</a></li><li>Improved holes pattern, to achieve good strength at layers.</li><li>Added print profiles optimized for translucent PETG and PC materials</li></ul>&nbsp;