Lucky3310

eds_3d_shop

⚠️Working on this complicated model takes a lot of time and if you like my work and want to support me and this design - please BOOST this design (click on the small Rocket 🚀 or „BOOST“ button) and print my bulletproof “Designer” printprofiles!🙏👍 Thank you in advance!🙏&nbsp;A1/A1mini AMSlite has a great design, but I think it would be nicer to have the option of connecting external filament dry boxes (or such <a target="_blank" href="https://makerworld.com/en/models/373405#profileId-273437" rel="nofollow noopener">Dust-Protector like my Duster</a>) with the help of PTFE tubes. And with the way filaments tend to wear out the edges of the feed funnel, it&#39;s nice to have some level of protection on the AMSlite. The PTFE connectors for AMSlite, which I could find so far either didn&#39;t hold properly or were very difficult to remove after installation 😳So, I designed my own😉, which has 2 clamps which hold the connector firmly on the funnel and release it easily when clamps will be loosing! 😎Additionally, I shaped PTFE channel in the way, that it points to the center of the spool and thus feeds filament into AMSlite at a more optimal angle. Even with almost empty filament spools, filament is fed into AMSlite at a better angle.These little helpers have beautiful dice symbols to number the filament inputs on the AMSlite. This is especially helpful when installing AMSlite vertically!&nbsp;Thanks to my supporter and tester <a target="_blank" href="https://makerworld.com/en/u/815356263" rel="nofollow noopener">SteveKratz</a> and <a target="_blank" href="https://makerworld.com/en/@Printwarrior" rel="nofollow noopener">PrintWarrior</a>! 🦾😍With their great help I was able to check and improve the functionality of this design!!! 🙏❤️👍<a target="_blank" href="https://makerworld.com/en/@SteveKratz" rel="nofollow noopener">Steve </a>- thank you for some awesome pictures too! 🙏&nbsp;⚠️This model must be printed in PETG filament! PETG is very important for the function of the clamps! Printed with PLA, for example, they won&#39;t last long on the AMSlite! ⚠️<h4>Print / Install Instructions:</h4>⚠️I recommend to use my print profiles - there are all these settings well done and tuned!<ul><li>place them with the number on the build plate</li><li>first layer line width: 0,38 (0.4 mm Nozzle)</li><li>first layer speed: 10ms per second (for perfect look of the button-surface)</li><li>first layer infill: 50ms per second (for perfect look of the button-surface)</li><li>3 perimeter, 5 top, 3 bottom layer, 15% infill</li><li>print layer height: 0.12mm and WALL generator: Classic (in this case please no Arachne) !!!</li><li>It is helpful to swith your Bambulab Printer from “Standard” Speed to “Quiet” - better quality and fit!</li></ul>⚠️Stick the PTFE tube through the inner hole about 1/8 of an inch (2mm), like you can see this in the pictures and it will keep the tube properly in!⚠️&nbsp;👌<a target="_blank" href="https://www.youtube.com/watch?v=pmIImYbayeM" rel="nofollow noopener">Just take a look at this video, here you can see how you can easily get these Easy-Clip Connector on the feeder properly!</a> 😍👍<figure class="media"><oembed url="https://www.youtube.com/watch?v=pmIImYbayeM"></oembed></figure>&nbsp;— ! —&nbsp;Thanks for downloading, rating in advance and please don&#39;t forget to like👍and to BOOST 🚀 this model! ;-)<h3>Take a look at my other very helpful designs for X1/P1P/P1S/A1/A1mini:</h3><figure class="image"><a href="https://makerworld.com/en/u/4051934936" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467088/design/2024-04-29_48a4a378d552f.png"></a><figcaption>🔗<a target="_blank" href="https://makerworld.com/en/u/4051934936" rel="nofollow noopener">Eds_3D_Shop designs on MakerWorld</a> 🔗</figcaption></figure>&nbsp;If you like my work and want to support me - please follow me here and on Instagram. If you want - you can buy me a coffee! <a target="_blank" href="https://linktr.ee/eds_3d_shop" rel="nofollow noopener">https://linktr.ee/eds_3d_shop</a>Thank you for your support and.. happy printing!Ed ;-)&nbsp;

AMSlite PTFE Tube Easy-Clip-Connector

Yes or No😉

Fugge84

Hello communityI was tired of always having vibrations on my wall or table from the printers.After a long time of testing and designing, I now have the best feet where almost no vibration comes through.The foot is printed entirely in TPU.Have fun printing.

Yes or No😉

A1 Mini Updates