Lox-3D

WIZZY

easy to assemble, just a few partsglue them all together you can pull out the magazine i spray painted it&nbsp;check out my other models too

MAC 10 UZI Counter Strike CSGO

Waffen

Madness3D

200x200mm And 150x150mm&nbsp;Please check out my hueforged 3D printable pictures that fit perfectly in these frames.

Picture frame - with back plate - 200mm & 150mm versions

Hueforge Frame

Think3D

My first try with the new color pop option. I hope you enjoy it :)&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Start with Black At layer #10 (0.88mm) swap to Gray At layer #13 (1.12mm) swap to White At layer #16 (1.36mm) swap to Blue At layer #23 (1.92mm) swap to Jade White for the rest.&nbsp;___________________________________________________________________________________If you like my work, please consider a small donation :) Thank you very much :*<a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=RWRXKCAEM86K8" rel="nofollow noopener">https://www.paypal.com/donate/?hosted_button_id=RWRXKCAEM86K8</a>&nbsp;

Goku - HueForge ColorPop

Hueforge Dragonball

enricoRE

Leopard HueForge Fire 163x245&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #13 (1.12mm) swap to Orange At layer #16 (1.36mm) swap to Yellow for the rest.

Leopard HueForge Fire 163x245

Hueforge Cool

Pikachu Pokemon HueForge&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmDon't scale Z heightSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #12 (1.04mm) swap to Yellow At layer #22 (1.84mm) swap to White for the rest.

Pikachu Pokemon HueForge

Hueforge Pokemon 

Das Herz gibt es mit oder ohne schrift Im Bambustudio kann man sich auch selber eine Beschiftung hinzufügen nach wunsch

Love Heart with Stand

PrintGeggo

The English translation is below.&nbsp;Dies ist ein Remix von dem bekannten Spiel Quoridor.&nbsp;Spieleranzahl: 2 – 4 Ziel: Mit seiner eigenen Figur die gegenüberliegende Seite des Spielbrettes als Erster zu erreichen Vorbereitung: Die 20 Wände werden gerecht zwischen den Spielern aufgeteilt.&nbsp;<ul><li>Das Spiel beginnt in der ersten Reihe in der Mitte (bei zwei Spielern ist es mit dem Plus gekennzeichnet.)</li><li>Der Spieler bewegt entweder seine Figur oder stellt eine Wand auf. Beides ist in einem Zug nicht möglich.</li><li>Auf der Plattform platzierte Wände müssen an 4 Felder angrenzen und können nicht mehr verschoben werden.</li><li>Es wird reihum gespielt, dabei darf die Figur (sofern der Weg nicht blockiert ist) in alle vier Himmelsrichtungen bewegt werden.</li><li>Wenn sich zwei Spielfiguren gegenüberstehen kann der Spieler, der am Zug ist, über die gegnerische Spielfigur springen. Wenn das Feld hinter der übersprungenen Figur durch eine Wand oder eine weitere Figur blockiert ist, darf ein freies Feld links oder rechts von der übersprungenen Figur gewählt werden.</li><li>Die Wände müssen so platziert werden, dass alle Spieler noch die Möglichkeit haben, ihre Zielseite zu erreichen.</li><li>Wenn der Spieler keine Wände mehr hat, muss er mit seiner Figur einen Zug machen. Deshalb sollten die Wände sinnvoll eingesetzt werden, weil sie gegen Ende des Spiels eine sehr entscheidende Rolle spielen können.</li><li>Der erste Spieler, der eines der 9 Felder in der letzten Reihe der Spielplattform erreicht, gewinnt das Spiel.</li></ul>Storage box for Quoridor von Crunchy<a target="_blank" href="https://makerworld.com/en/models/142419#profileId-155060" rel="nofollow noopener">https://makerworld.com/en/models/142419#profileId-155060</a>&nbsp;---------------------------------------&nbsp;Google translation:This is a remix of the famous game Quoridor.&nbsp;Number of players: 2 – 4 Goal: To be the first to reach the opposite side of the game board with your own figure Preparation: The 20 walls are divided equally between the players.&nbsp;<ul><li>The game begins in the front row in the middle (if there are two players, it is marked with a plus.)</li><li>The player either moves their figure or puts up a wall. Both are not possible in one go.</li><li>Walls placed on the platform must be adjacent to 4 spaces and can no longer be moved.</li><li>It is played in turns and the figure can be moved in all four directions (as long as the path is not blocked).</li><li>When two pieces face each other, the player whose turn it is can jump over the opposing piece. If the space behind the skipped piece is blocked by a wall or another piece, you may choose a free space to the left or right of the skipped piece.</li><li>The walls must be placed so that all players still have the opportunity to reach their target side.</li><li>When the player runs out of walls, he must make a move with his figure. That's why the walls should be used wisely because they can play a very crucial role towards the end of the game.</li><li>The first player to reach one of the 9 spaces in the last row of the playing platform wins the game.</li></ul>Storage box for Quoridor by Crunchy<a target="_blank" href="https://makerworld.com/en/models/142419#profileId-155060" rel="nofollow noopener">https://makerworld.com/en/models/142419#profileId-155060</a>

Quoridor (Maze Board Game)

Spiele

Jorge Rui

<h4>Description and contextualization</h4><blockquote>A present to you, a Rack for the Mutil-Modular Storage System (MMSS) that I've been developing. Don't go running to buying a ton of filament, first you must understand how this work....You can do it step by step.You can start with a simple model, and store it in your closet, some drawer, or card box; a month later, you may buy something else and print the corresponding module to store your precious component or accessories. Someday, you may need a box or maybe a case (if you have to transport your things) to store the modules you already have…In the limit, some people, need a complete rack, because they have a lot of things (maybe a print farm).But this rack, on its own, has the Build plate dispenser, and for most people, this project ends there. But you are like my, and make things scalable and that's why this is all modular.</blockquote><h3>Introduction</h3>This rack serves as a support to the different projects carried out around what I can already call an ecosystem, namely; <ul><li><a target="_blank" href="https://www.printables.com/model/556159-multi-modular-storage-system-mmss" rel="nofollow noopener">Multi-Modular Storage System -MMSS</a> </li><li><a target="_blank" href="https://www.printables.com/model/557727-box-with-lid-for-mmss" rel="nofollow noopener">Box with lid for MMSS</a></li><li><a target="_blank" href="https://www.printables.com/model/556615-case-for-the-mmss" rel="nofollow noopener">Case for the MMSS</a></li></ul><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_yakhnxubxzta.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_h8ksq5b2vafv.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_opyjqt3vl1be.jpg"></figure></td></tr><tr><td><a target="_blank" href="https://www.printables.com/model/556159-multi-modular-storage-system-mmss" rel="nofollow noopener">Multi-Modular Storage System -MMSS</a> </td><td><a target="_blank" href="https://www.printables.com/model/557727-box-with-lid-for-mmss" rel="nofollow noopener">Box with lid for MMSS</a></td><td><a target="_blank" href="https://www.printables.com/model/556615-case-for-the-mmss" rel="nofollow noopener">Case for the MMSS</a></td></tr></tbody></table></figure><ul><li>The amount of modules you can add is growing fast:<ul><li><a target="_blank" href="https://www.printables.com/model/557566-mmss-2x4-module-glue-stick-and-hexagonal-keys" rel="nofollow noopener">MMSS 2x4 Module - Glue Stick and Hexagonal Keys</a></li><li><a target="_blank" href="https://www.printables.com/model/557452-mmss-1x1-module-microsd" rel="nofollow noopener">MMSS 1x1 Module - MicroSD</a></li><li><a target="_blank" href="https://www.printables.com/model/557397-mmss-1x1-module-nozzle-wipper" rel="nofollow noopener">MMSS 1x1 Module - Nozzle Wipper</a></li><li><a target="_blank" href="https://www.printables.com/model/557390-mmss-1x1-module-filament-cutter-microsd" rel="nofollow noopener">MMSS 1x1 Module - Filament Cutter + MicroSD</a></li><li><a target="_blank" href="https://www.printables.com/model/570948-mmss-1x1-module-filament-cutter" rel="nofollow noopener">MMSS 1x1 Module - Filament Cutter</a></li><li><a target="_blank" href="https://www.printables.com/model/559405-mmss-1x2-module-hotend-and-silicon-sock" rel="nofollow noopener">MMSS 1x2 Module - Hotend and Silicon Sock</a></li><li><a target="_blank" href="https://www.printables.com/model/561092-mmss-1x3-module-complete-hotend" rel="nofollow noopener">MMSS 1x3 Module - Complete Hotend</a></li><li><a target="_blank" href="https://www.printables.com/model/561215-mmss-2x3-module-small-scraper" rel="nofollow noopener">MMSS 2x3 Module - Small Scraper</a></li><li><a target="_blank" href="https://www.printables.com/model/564616-mmss-2x5-module-liquid-glue" rel="nofollow noopener">MMSS 2x5 Module - Liquid Glue</a></li><li><a target="_blank" href="https://www.printables.com/model/563208-mmss-various-size-modules-pocket-with-lid" rel="nofollow noopener">MMSS various Modules - Pockets with Lid</a></li><li><a target="_blank" href="https://www.printables.com/model/580675-mmss-2x3-module-spool-holder" rel="nofollow noopener">MMSS 2x3 Module - Spool Holder</a></li><li><a target="_blank" href="https://www.printables.com/model/567939-mmss-1x5-module-original-bambu-lab-scraper" rel="nofollow noopener">MMSS 1x5 bambu lab original scraper</a></li><li><a target="_blank" href="https://www.printables.com/model/618034-mmss-2x4-module-pocket-with-lid-for-bolts-and-magn" rel="nofollow noopener">MMSS 2x4 Bolts and Magnets Pockets with Lid</a></li><li><a target="_blank" href="https://www.printables.com/model/686267-mmss-2x2-module-extruder" rel="nofollow noopener">MMSS 2x2 Module - Hardened Steel Extruder Unit</a></li><li><a target="_blank" href="https://www.printables.com/model/613965-bambu-lab-ams-service-and-spares-parts-for-the-mms" rel="nofollow noopener">MMSS for AMS Modules</a> <ul><li>4x Active extrusion wheel assembly;</li><li>4x Active support shaft assembly;</li><li>4x PTFE Tube Fast Connector;</li><li>4x Driven Support Shaft Assembly</li><li>1x First Stage Feeder</li></ul></li><li>More to come… I'm always adding new modules, please check <a target="_blank" href="https://www.printables.com/@jorge_rui" rel="nofollow noopener">my profile </a> and here on <a target="_blank" href="https://makerworld.com/pt/u/3059492201" rel="nofollow noopener">makerworld.com</a> for the later information, some are free, others are only available as exclusives for members of "<a target="_blank" href="https://www.printables.com/@jorge_rui/exclusive-models" rel="nofollow noopener">my club</a>".</li></ul></li><li>This rack adds now support for the build plates.</li></ul><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_028behu1ai4g.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_r0t2wpt4b0hc.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_iynsbv28k7qz.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_e0zdl1u2l61m.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_0xxhhupg1j68.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_b96wxyl4ivi0.jpg"></figure></td></tr></tbody></table></figure>… and more<h3>Assembly info</h3><blockquote>Read carefully the explanation that fallows. I've tried to be systematic for anyone to understand. This os not a print of a small toy or a vase, you will need to make decision, so make them informed.</blockquote>1- Start here - Assemble the base that will serve the build plates. if you have many you can stack them together. 1.1 - All you need, and more, is available withing the file “rack_lower_module.3mf”.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_90fcltoa6t1b.png"></figure>2 - Now you have a choice to make: 2.1 - Stop here on the basic module for the build plates, or; 2.2 - continue to add other parts from the MMSS ecosystem.If MMSS = 2.1 then; You will need a cover like this to finish the job, you will find that part on the 3mf file regarding the rack for build plates<figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_v5wp6a6k3st9.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_6wmgn4kaqu97.png"></figure>Tip:For the <a target="_blank" href="https://shrsl.com/4cpnz" rel="nofollow noopener">PETG </a>springs, flex the back plate a little for them to slide on the dovetail. <figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_cg9pvea3vxof.png"></figure>If MMSS = 2.2 then;<ul><li>you can add other rack for build plates, if really like build plates :) or;</li><li>add a MMSS box or case, or several of them. </li></ul> 2.2.1 Ok, you need to add more modules on top of the “Base module" that serves the build plates. Now you can choose to continue with the barebone or the complete version.<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_xvcygijnz78z.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_dgrggf1uh6w5.jpg"></figure></td></tr><tr><td>2.3 - Barebone rack</td><td>2.4 Complete rack</td></tr></tbody></table></figure>If MMSS = 2.3 then;2.3 Barebone RackIf you go this way, you will need some new parts that you can find on the 3mf file “rack_middle_modules.3mf”.<blockquote>This drawing will help you choose the right heights for the spacers, almost all the parts are the same for any modules you choose, with the exception of the top.</blockquote><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_ezkcpjon3vvn.png"></figure>Easy, isn't it? ;) 2.3.1 There are some parts that you will need to go up, in what I call, the middle steps. These parts can be found on the 3mf file stated on 2.3 point. You can stack modules on top of each other, most parts are the same, just be careful to choose the “Pillars” A, B or C depending on what you need, these will give you the space necessary for each module (see drawing above).&nbsp;&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_max8ix3ip37e.png"></figure><blockquote>See does red pins? They have to go with a tight fit, if you notice them loose on the guides or on the Pilar’s see if the filament is calibrated, sometime, certain materials shrink more than others, petg tends to be more stable… anyways if all fails, use the scale tool on the slicer to compensate.</blockquote> 2.3.2 At some point you will reach the top, and you will need to close the rack top.<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_mzlwingfk9g9.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_572cuaywt1k1.png"></figure></td></tr><tr><td>2.3.2.1 - Normal top</td><td>2.3.2.2 - Top made with the lid from the Box for the MMSS</td></tr></tbody></table></figure> 2.3.3 After choosing the top, you can print the corresponding modules from the “rack_tops_modules.3mf”.If MMSS = 2.4 then;2.4 The complete rack - This will add some panels to the side of the rack, making it look like this:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_kft5olj06k4q.jpg"></figure><blockquote>The aspect may vary depending on the modules you have chosen on the previous steps.</blockquote> 2.4.1 You can see that you will need different panels depending on the height of the modules, something very similar to the situation of the Pillars A, B and C.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_qren5ivpbsnu.png"></figure>To print this, you must choose what you need on the file “rack_lateral_panels.3mf”<blockquote>If you have the “<a target="_blank" href="https://www.printables.com/model/556615-case-for-the-mmss" rel="nofollow noopener">Case for the MMSS</a>” with the lower Lid for the PTFE tubes, use the “Cover E”If you plan to use the case with lid in one of the middle stages, you should use Pillar C and a new Cover; Cover F (Cover lateral panel_F.step)</blockquote>Material to use<ul><li>If you use this affiliate links to buy filament, it will cost you the same and I will get a small "kickback". Thanks !<ul><li><a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&u=4026304&m=138211&urllink=&afftrack=" rel="nofollow noopener">Filament used on this project</a>, choose any color you like. For the greatest result and if your printer can do it, use <a target="_blank" href="https://shrsl.com/4cvrd" rel="nofollow noopener">PLA with carbon fiber</a>, amazing finish! Maybe it is time to test that sample you may have received with your printer (X1C users).</li><li>I've used in this project some <a target="_blank" href="https://shrsl.com/4cpnz" rel="nofollow noopener">PETG </a>too.</li></ul></li></ul><h3>Change log:</h3><ul><li>19-09-2023 - change the diameter of the TPU feet for better fitting. If you already have them, just put a little of TPU filament on the side if you find it to lose. </li><li>21-09-2023 - Better layout of the “rack_lower_module.3mf” file . Thanks to <a target="_blank" href="https://www.printables.com/@amateur3d_939146" rel="nofollow noopener">Amateus3D</a></li><li>22-09-2023 - Back_plate_narrow has now stronger “pegs”. File changed “rack_middle_modules.3mf”. Thanks to <a target="_blank" href="https://www.printables.com/@hoonu_203988/makes" rel="nofollow noopener">hoonu</a>.</li><li>22-09-2023 - Lateral panels pegs should be stronger now. Change to some aspects of the layout on the 3mf file.</li><li>24-09-2023 - Small change to the small pin diameter, for stronger fit. File changed “rack_middle_modules.3mf”.</li><li>01-10-2023 - Added a new panel if you decide to use the box with lid in one of the middle stages (see description above in 2.4.1) - Thanks to <a target="_blank" href="https://www.printables.com/@thedevilsjeste_18993" rel="nofollow noopener">thedevilsjester</a></li><li>10-10-2023 - Some members(1) reported some instability of the structure, namely the configuration that presents the top the “normal top” and already has some modules, so already with a certain height. This update is intended to address those issues. Thus, the updated components are:<ul><li>rack_tops_modules.3mf - in there the steps updated are:<ul><li>Top_plate_for_back.STEP</li><li>Top_plate_for_front.STEP</li><li>Top_plate_for_Front_right.STEP</li><li>Top_plate_for_Front_left.STEP</li><li>Top_plate_for_BPlate_right.STEP</li><li>Top_plate_for_BPlate_left.STEP</li></ul></li><li>If the structure is ok to you, that's because the fits are ok and all is working fine.</li></ul></li><li>12-10-2023 - Bambu Lab logo was inverted, this can be found on file: “rack_tops.3mf” <ul><li>A new version of the pin was added that may offer a better fit in some situations. This new pin is found on file: “rack_middle_modules.3mf”</li></ul></li><li>18-10-2023 - Added a lid for the plain drawer: “lid_simple_drawer.step”</li></ul><h4>Support the designer:</h4>This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a target="_blank" href="https://www.buymeacoffee.com/designrepcom" rel="nofollow noopener">buymeacoffee </a>or <a target="_blank" href="https://www.paypal.com/donate/?business=BUM67EMDJRXSN&no_recurring=0&currency_code=EUR" rel="nofollow noopener">PayPal</a>.

Storage Rack for the MMSS

Drucker Zubehör

ralf.hoerhager

<a target="_blank" href="https://www.printables.com/de/model/418290-sanding-wedge-v2" rel="nofollow noopener">Printables Link</a>&nbsp;General informationAs you might have guessed from the title, this is the 2nd version of my sanding wedge. I made the models in Autodesk Inventor. &nbsp;The new design is Fully 3d printed, no bolts or nuts needed.&nbsp;Technical detailsThis sanding wedge is made for 50mm wide sandpaper. The sandpaper must be at least 310mm long for the original version and 225mm for the small version.I recommend you buy a roll of Sandpaper that already has the desired width and then cut it to length.&nbsp;Here are some I found on Amazon: <ul><li><a target="_blank" href="https://amzn.eu/d/5q3raSU" rel="nofollow noopener">Bosch DIY Sanding Roll for Metal 50mm 5m 120 Grit </a></li><li><a target="_blank" href="https://amzn.eu/d/gXm8hH8" rel="nofollow noopener">Klingspor 4224 - KL 361 JF Sanding Rolls with Fabric Backing, Brown, 50 x 25000, Packaging Unit 1 - Grain 180</a> </li></ul>&nbsp;Update 11.10.2023 : I added a brim and spread it over more plates to reduce printing errors. Also made the hole in the "wedge" bigger because it was too tight.

Sanding Wedge V2

Nützliche Dinge

OSUVENSE

Another silica box to fill the AMS, with this slim one you can put two more boxes on the front side spaces.

Slim/front side silica box/dry box for Bambulab AMS

dakjones82

<h3>Model</h3>This Bluey Heeler was a project for my 3-year-old girl who adores the show (we love it too!). This version uses 4 colors and parametric blending techniques to get even more colors (6) in the final print by blending thin layers to create different shades. Thank you for downloading and happy printing!&nbsp;Colors:&nbsp;(Important note) Matte filaments do NOT work well for blending as they are much more opaque than standard PLA meaning they do not allow light/color to pass through.&nbsp;Bambu PLA whitePolymaker Aqua BlueBambu PLA Basic Gold (you can get away with many different yellow/gold colors)Bambu PLA blackBambu PLA Basic Blue

Bluey Door (Single AMS Version) 4 spools = 7 colors (Parametric Blending) 

Kinder

Slowpoke's Workshop

nice Santa decoration for door way

Christmas Santa corner hohoho and merry Christmas 

Weihnachten

Ludo Timp

Z-axis cap for P1P, X1 and X1C  |  Loose fit!&nbsp;For all the people who want to give feedback on the fact that this cap is too loose of a fit:The reason of the loose fit that rotates easily is that not in any case you want a z-axis dust cover to grip, snap or sit to tight at the top op the z-axis screw rod. Just the slightest resistance of a cap against the z-axis screw rod can result in layer defects. So I advice you to go for the safe option, in stead of the tight option. And if you don't want any risk whatsoever, don't use a cap at all. Not even mine that has a loose fit.I use them now for over a year and never had any z-axis defects, pop off's or other issues.&nbsp;Features:<ul><li>Shields the metal z-axis end-bearing from dust and filament debris.</li><li>Material: Bambu Lab Black ABS.</li><li>Chamfered bottom and top.</li><li>Diameter: 19mm.</li><li>Height: 2mm.</li><li>Includes 1,5mm inside indent for z-axis metal protrusion.</li><li>To be placed on top of the z-axis.</li><li>Sightly smaller then the z-axis hole so the cap can rotate freely if needed.</li><li>Printed on Bambu Lab PEI textured plate to match the plastic z-axis mount matte finish a bit.</li><li>Easy removal: just press your finger a few seconds on the cap and lift it off.</li></ul>Disclaimer: This design is free to download including the accompanied files. By downloading this design, you agree to the following:<ul><li>as with all designs that you didn’t make and test yourself, mine may work or won’t for you,</li><li>I can’t give any guarantees for the print you make, the way you do it and which tools u use,</li><li>no rights can be derived and I can’t be held liable.</li></ul>If you have questions or suggestions, please contact me by message. In case you need an adjustment or re-design, I’ll perform those upon payment.  If you like what I made and want to tip me for it, please do so at your discretion at <a target="_blank" href="https://ko-fi.com/ludotimp" rel="nofollow noopener">Ko-Fi</a>. Have fun and enjoy being creative!

Z-axis cap P1P, X1, X1C  |  Loose fit!

Drucker

JamesThePrinter

Cylindrical container covered in spikes!&nbsp;&nbsp;Print SettingsVase mode required. Personally, I prefer to use thick perimeters in vase mode for added strength.&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The following filaments were used in the pictures above:<ul><li>MatterHackers Quantum Blue Raspberry PLA</li><li>MatterHackers Quantum Blue Yellow PLA</li></ul>

Spiky Pencil Holder

Cool

ME STUDIO

<h4>FREE Super Mario Coaster, Wall Art</h4>Please share with me your printing image. By doing so, you will have the opportunity to receive special printing files such as Pokemon character coasters, keychains, and more.Thank you!&nbsp;Sample Video Link: <a target="_blank" href="https://youtu.be/OW8CEDwd7wc" rel="nofollow noopener">https://youtu.be/OW8CEDwd7wc</a>&nbsp;If you love my works, please come to download a set of 6 coasters, check out my 3D models library.Dimensions: 100 mm diameter 4 mm heightThis model is for private use only! Welcome to join my Patreon, you can get monthly models and a welcome package.<a target="_blank" href="http://patreon.com/MESTUDIO" rel="nofollow noopener">http://patreon.com/MESTUDIO</a>