Longracks Labs

NutellaPizza

As many have asked for it, here is the PETG Temperature Tower (e.g. Bambu PETG).&nbsp;PETG Test for 240 - 270 °C&nbsp;------&nbsp;Check out my other temperature towers:Normal PLA: <a target="_blank" href="https://makerworld.com/en/models/506049#profileId-421778" rel="nofollow noopener">https://makerworld.com/en/models/506049#profileId-421778</a>PLA+: <a target="_blank" href="https://makerworld.com/en/models/512691#profileId-428788" rel="nofollow noopener">https://makerworld.com/en/models/512691#profileId-428788</a>&nbsp;------&nbsp;The attached .3mf file contains the corresponding gcode for the Heat-Temperature-Tower. The print takes about 2 hours (tested on my BambuLab A1). Instructions: 0. Use a Mac / PC. The mobile app does not support custom gcode. 1. Click “Open in Bambu Studio” or download the .3mf file via the drop-down arrow text to “Download or Print” and select “Download STL”. 2. (Open the .3mf file with Bambu Studio) Click on &#34;slice plate&#34; and then on &#34;print plate&#34;. 3. After the print is finished, you can evaluate the temperature tower in terms of stringing, accuracy (e.g. overhangs, cones etc.). 4. It also makes sense to evaluate the temperature tower destructively. For example, you can use pliers to break off individual layers of each temperature range and find the optimum layer strength for your PETG.&nbsp;------ My temperature tower tests the Bambu PETG with linear overhang (35° &amp; 45°), radial overhang (4 mm &amp; 6 mm radius), bridging, stringing, cones / circles and simulates &#34;drill holes&#34; and much more. NutellaPizza

Bambu PETG Temperature Tower (240 - 270 °C)

Next Prints