My new Shopping Trolley Token Collection is now live! Featuring a growing range of practical and fun designs including lucky charms, hobbies, shopping-themed slogans and more. Each token is designed for many £1 and €1 style trolley locks, with a keyring hole and multi-colour friendly design. More designs are already in the works, so let me know what themes you'd like to see next! 😊

❄️ Pet Feeding Contest Entry – Dog Bone Frozen Treat Tray ❄️ With the recent hot weather, I wanted to create something simple that could help keep dogs cool while also providing a little enrichment. The idea was to design a tray that was easy to print, practical to use, and created frozen treats in a range of sizes. One of the biggest design challenges was making sure the ice didn't simply fall out when the tray was removed from the freezer, so I shaped each cavity to help keep the frozen treats securely in place. For the featured print, I used Bambu Lab PLA Pure for the white version to give the model a clean, natural finish. I also printed a blue version to demonstrate the design and compare different finishes. I'd love to hear your feedback and see your prints if you decide to make one for your own furry friend! Model: https://makerworld.com/en/models/3034259-dog-bone-frozen-treat-tray-cooling-enrichment#profileId-3410896 #petfeeder #Contests(Edited)

#Contests #Hostedbycreator #Bonbon Think outside the box... or in this case, inside the capsule! My BONBON Pocket Coffee Kit packs a miniature pour-over coffee station into a 2.7" BONBON capsule, complete with a V60-style dripper, stand, mug, filters and spoon. A fun little surprise to build, display and enjoy. Happy brewing! ☕🤎

#Contests #Hostedbycreator #Bonbon Think outside the box... or in this case, inside the capsule! My BONBON Pocket Fishing Kit – Lure Edition packs a modular fishing pole, hidden lure storage, and five miniature lures into a 2.7" BONBON capsule. A fun little surprise to build, display, or even try your luck with. I even included a PETG profile if you're planning on catching anything big! 😄🎣

#Contests #Hostedbycreator #Bonbon Think outside the box... or in this case, inside the capsule! My BONBON Pocket Fishing Kit packs a modular fishing pole, line storage, and a miniature float into a 2.7" BONBON capsule. A fun little surprise to build, display, or even try your luck with. I even included a PETG profile if you're planning on catching anything big! 😄

Think outside the box... or in this case, inside the capsule! My BONBON Pocket Fishing Kit packs a modular fishing pole, line storage, and a miniature float into a 2.7" BONBON capsule. A fun little surprise to build, display, or even try your luck with. I even included a PETG profile if you're planning on catching anything big! 😄

Just uploaded a new Toothbrush & Toothpaste Holder! It holds 2 toothbrushes (manual or electric) and 2 tubes of toothpaste in a compact, easy-to-print design. No supports needed—just a simple, practical print to help keep your bathroom tidy.

Keep your nic salts organised with this modern 20-bottle holder! The stepped design makes every bottle easy to see, while the unique viewing holes let you identify flavours without removing them. Includes dedicated A1 Mini and P1 Series print profiles, both optimised with 2 walls and 7% infill. No supports required!

JUST DROPPED: The Parody Soda Opener Pack! Save your fingernails with these 8 hilarious, AMS-ready keychain openers. Features classics like Choke, Poop Si, and Dr. Pooper! No brim needed, prints flat on a textured PEI plate. Drop a BOOST if it saves your thumbs, and check my Membership page for Commercial Rights to sell them!

New design just dropped... HAMMERED! 🍺 A hammer-shaped can tab opener that helps save your fingernails and doubles as a handy keychain. Quick to print, no supports needed, and perfect for anyone who appreciates a terrible pun! 😄 I've also redesigned my original can opener, so if you've seen the old version, check out the updated one too. As always, your prints, ratings and Boosts are hugely appreciated! 💙

Just released my new 3-in-1 Outdoor Target Games! 🎯 Swap between three fun throwing games using the same stand, with an optional ground spike for grass or beach use. Perfect for gardens, camping, BBQs and family fun.

Just launched my new Elastic Band Launch Jet Glider! https://makerworld.com/en/models/2962831-elastic-band-launch-jet-glider#profileId-3321530 #Contests #ChildrensToys(Edited)

Just launched my latest design: LED Fighter Jet Wall Light Featuring integrated LED routing channels, built-in keyhole mounting, and 30mm stand-offs to create a floating halo glow effect on your wall. Designed around standard 10mm LED strips and compatible with battery-powered RGB kits for a clean, cable-free appearance. I'd love to see your makes, colour combinations, and setup photos. If you enjoy the design, a Boost is always appreciated and helps support future projects! Happy printing!

🇺🇸 By popular request, I've released a US Split Cable Pass-Through Wall Plate! Designed to install around existing cables without disconnecting them, making it perfect for HDMI, Ethernet, USB, speaker cables and more. As I'm based in the UK, this version was created using standard US dimensions, so feedback from US users would be greatly appreciated. Let me know how it fits and I'll happily make improvements if needed. Happy printing!

NEW: Container Challenge! After plenty of testing, tweaking, floating, stacking, and the occasional cargo disaster, Container Challenge is finally here! Spin the floating spinner, load the containers onto the ship, and try not to be the player who sends everything overboard. Perfect for baths, paddling pools, hot tubs, or just tabletop fun. Can you keep your cargo ship afloat... or will it capsize under pressure? I'd love to see your highest stacks and most spectacular shipwrecks in the comments

New release! Adjustable Tilt Tablet Stand with a secure locking hinge, multiple viewing angles and built-in charging cable access. Perfect for tablets, iPads, video calls, media viewing, reading and desktop use. Easy to print, simple to assemble and designed for everyday use. Feedback, makes and boosts are always appreciated!

Just released my entry for the Moku Design Contest! A clean and minimalist phone stand designed to fit seamlessly into the Moku Modular Desk System. Features rear cable routing, easy device access, and support-free printing. Check it out and let me know what you think!

Just uploaded a new practical design! I was getting annoyed with flies hanging around my desk, and ceiling-mounted fly paper wasn't really where the flies were. So I designed a simple portable fly paper stand that lets you place fly strips exactly where they're needed. No hooks, no adhesive pads, no ceiling mounting—just print, assemble, and position it wherever flies are gathering. As always, feedback, makes, and boosts are greatly appreciated!