Just needs a little better balance or a stand to support it.

Love this. I typically open about 6-8 cans at a time, I printed 3 of these.

My Daughter loves it. Used Jayo Rainbow Silk and CMACAIV light Rainbow for the Roses on top. Did my own thing with it and re-painted some parts. Printed at .2mm height, .63 width, 4 walls 15% gyroid Still took 10 hours.

Absolute best clips i've used to date. These work with the ams lite similarly to the AMS Fun fact. I pulled two of them off the build plate and the split right in the middle, the still work perfectly at 1/2 the width. I printed these at 100 walls 0% infill .20 mm layer height and .63 mm layer width on my A1. Jayo PLA + Silk Rainbow 01, Jayo PLA white and Black Sunlu High Speed Matte PETG (Not Pictured)

Larger than I expected, but it works excellent for bambu spools. Would it be possible to make this for smaller spools like Sunlu, Jayo, Amoled?

So I wanted this to be extra strong, so I used a Bambu HF PETG 230c Nozzle, 70c bed temp on my SuperTach .6mm nozzle .24mm height .9mm layer widths. Default Speeds 15% Rectilinear for strength and speed (ya ya, I know everything thinks gyroid is stonger, but in this application it's moot) Inner/Outer/Inner wall order Rectilinear Top and Bottom Surfaces. I think They turned out pretty fantastic.

Fun Print, 2 of the 3 I printed had 2 legs snap while gently pulling it off the plate, I increased the walls to 3 and bumped the infill 5% and scaled it up 25% and it worked great.