Lithium_Lokky

plomdawg

Taco bell sauce dispenser designed for either countertop or IKEA Skadis pegboard usage (all versions are on separate plates in the file)&nbsp;Simply glue the hooks into place after printing (they are printed horizontally for strength)&nbsp;hooks are from: https://www.printables.com/model/304196-gps-skadis-hook-ng-step

Taco Bell Sauce Holder (pegboard & countertop)

kitchen

BamBam Design

<h4>Toroidal Windmill - Self adjusting turbine</h4>Looks like a spinning flower and no much wind is needed.<a target="_blank" href="https://youtube.com/shorts/WrKHW2Cdyvk?si=byQ_EpJAfOOy8x7F" rel="nofollow noopener">YouTube Short</a>&nbsp;<ul><li>Beautiful Windmill with toroidal Propeller Blades</li><li>Self adjusting to wind direction (Tail Blade Reworked)</li><li>100% printed, no Screws or tools needed</li><li>You can add 3 Propellers on one Axle with 2 distances</li><li>Full customizable with different propeller sizes and directions (I plan to add more cool propeller types as well)</li><li>Rods are stack able to your needed height</li></ul><h4>Printing:</h4>You can choose Propellers from 3 Print Profiles<ul><li>Basic Parts with Left&amp; Right Propeller to choose</li><li>Additional Propeller Blades</li><li>Additional Slower Propeller *New</li></ul>You can mix the propellers from these profiles.<ul><li>added one profile for A1mini without the biggest blade as well</li></ul>The rod could be a bit difficult to print, i added custom support, but clean your buildplate and apply some glue.&nbsp;PETG &amp; PLA tested👍🏼<h4>Assembly:</h4><h4>Info:</h4><ul><li>Added custom support to the horizontal printing rod</li><li>Added optional longer axle for more distance between propellers (10mm instead of 5mm).  With stronger wind the bigger blades should not collide.</li></ul>The Pitch from the Basic Blades:<ul><li>Big - Pitch 195mm</li><li>Med - Pitch 170mm</li><li>Small - Pitch 135mm</li></ul>Additional Propeller Blades with different numbers of Wings:<ul><li>Big - Pitch 190mm</li><li>Med - Pitch 160mm</li><li>Small - Pitch 130mm</li></ul>Additional “Slower” Propeller Blades:<ul><li>Big - Pitch 400mm</li><li>Med - Pitch 325mm</li><li>Small - Pitch 250mm</li></ul>Thanks to all followers and don&#39;t forget the virtual handshake 👍 ….Happy Printing&nbsp;Info II:My other windmills are fully compatible if you want to mix it up:<ul><li><a target="_blank" href="https://makerworld.com/models/235261" rel="nofollow noopener">Toroidal Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/250216" rel="nofollow noopener">Honeycomb Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/388124" rel="nofollow noopener">Elliptical Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/425419" rel="nofollow noopener">Sunflower Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/454861" rel="nofollow noopener">Raccoon Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/255324" rel="nofollow noopener">CLAMP for Windmills</a></li></ul>Info III:More modifications you find on my Patreon account.<figure class="image"><a href="https://www.patreon.com/posts/mod-608-bearing-105175595" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000235261/design/2024-05-30_3ad9786c3df1b.png"></a></figure>&nbsp;<figure class="image"><a href="https://www.patreon.com/posts/mod-pole-adapter-103628897" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000235261/design/2024-05-30_70c92ad1f54a9.png"></a></figure>&nbsp;Commercial license you can get here:<a target="_blank" href="https://www.patreon.com/BamBamDesign/membership" rel="nofollow noopener">https://www.patreon.com/BamBamDesign/membership</a>

Toroidal Windmill - Customizable system

windmills

OdinStampe3D

This Dry box spool holder is designed to specificallyfit this cheap cereal box and Hygrometer you can buy on Amazon:Cereal box: <a target="_blank" href="https://www.amazon.it/gp/product/B08JTH2NZJ/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1" rel="nofollow noopener">https://www.amazon.it/gp/product/B08JTH2NZJ/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1</a>Hygrometer: <a target="_blank" href="https://www.amazon.it/gp/product/B09WGLXRM5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1" rel="nofollow noopener">https://www.amazon.it/gp/product/B09WGLXRM5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1</a>I use them to store filament in a dry environment, by placing the following silica beads inside the tank:Silica: <a target="_blank" href="https://www.amazon.it/gp/product/B07VG9W5JX/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1" rel="nofollow noopener">https://www.amazon.it/gp/product/B07VG9W5JX/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1</a>

Cereal box - Dry box - Spool and Dessiccant holder

humidity control

bigbausraus

this computer fan shroud is designed to allow your cat to sit on top of your pc while still venting heat away and also heating your cat sitting on your pc keeping yourself and your cat happy :) . leg attachments included incase your cat keeps pushing the shroud off as it jumps on your pc.&nbsp;requires 6x 20mm Diameter x 3mm height magnets.&nbsp;best to print in PETG or any other high temp filament due to heat exhaust. print top layer as CONCENTRIC due to the large top surface area being diagonal concentric infill for top layer will result in the highest quality print. the 3mf cat shroud file should have this setting pre-set for you.if the 3 files are hard to attach together just hammer it on a flat surface.

pc fan shroud cat friendly for fractal meshify 2

pc parts

buckler-bronze

Upgrade your workspace with the Bambu Buddy, a streamlined, easy-to-install organizer specifically crafted for the Bambu X1 series and P1S printer doors. Ideal for arranging everyday, lightweight tools, this organizer is a must-have for anyone aiming to enhance efficiency and orderliness in their printing area.&nbsp;UPDATE: Added a new profile that uses Normal support with increased z-height to help support removal. This is the new recommended profile. <h4>Why Bambu Buddy?</h4><ul><li>Convenient Access: Attached directly to your printer's door, the Bambu Buddy places your lightweight essential tools and accessories within arm's reach, ensuring a smooth and uninterrupted printing process.</li><li>Space-Saving Design: By utilizing the unused space on your printer's door, the Bambu Buddy helps declutter your workspace, allowing for a more organized and productive environment. Sleek design ensures continued visibility inside the printer.</li><li>Seamless Integration: Designed to complement the aesthetics of the Bambu X1 and P1 printers, the Bambu Buddy blends in effortlessly, adding functionality without disrupting the sleek design of your printer.</li><li>Collision-free: Designed to avoid any collision with the side frame even when fully open.</li></ul><h4> </h4><h4>Features:</h4><ul><li>Custom Compartments: Tailored to hold a variety of printing tools and accessories, such as spatulas, glue sticks, hygrometers and filament clips.</li><li>Easy Installation: Simply attach the organizer to your printer's door with minimal effort. No tools required (Magnets optional), making it perfect for both novices and experienced users.</li><li>Sturdy and Durable: Bambu Buddy is designed to withstand the rigors of daily use while maintaining its form and functionality.</li><li>Customize your Printer: Use the 40 alphanumeric character multi-color prints to easily name your printer, write custom notes or make art.</li></ul>&nbsp;Material & Printing:The design is optimized for both strength and lightweight performance, requiring approximately 45 grams of material.&nbsp;&nbsp;Installation Note:Installation is a breeze. The Bambu Buddy effortlessly clips onto the four hinge nuts on of your Bambu X1C/X1E or P1S printer, providing a secure and stable fit without the need for additional hardware. Magnets (8mm) are optional but the organizer should fit pretty snug as-is.&nbsp;&nbsp;Customization and Adjustments:The Bambu Buddy is designed to universally fit the doors of both the Bambu X1C/X1E and P1S models.Create your own compartments and slots according to your needs.However, if you have custom modifications on your printer's door, slight adjustments to the organizer can be made for a perfect fit.&nbsp;Share Your Experience:I'd love to see how the Bambu Buddy enhances your printing setup. Share your photos and feedback to inspire fellow enthusiasts and to show off your organized, efficient workspace.&nbsp;This organizer is meant for lightweight items only, don't use it for heavy items to avoid risk of damaging the door.Note: This model is created by a normal user, this not an official Bambu Lab model. &nbsp;

Bambu Buddy : Door-Mounted Organizer for X1/P1S Printers (No tools needed)

printer accessories

baris.ayarkan

A high-quality 3D printable flowerpot modeled after the famous masterpiece by Michelangelo. Highly optimized for 3D printing, no support required, no post-processing required. Just print with the filament you desire, and it will look perfect and ready to use. Consists of 2 parts, the top has built-in small holes for excess water and the base serves as vessel. Perfect gift for flower lovers from a 3D printer owner.

David flowerpot

vases and lamps

FunkyArt

<h2>Summary</h2><figure class="media"><div data-oembed-url="https://youtu.be/t3RyXABqAxM"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/t3RyXABqAxM" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>You can see a great example of this HEX Panels on <a target="_blank" href="https://www.youtube.com/@engineericly" rel="nofollow noopener">Engineericly</a> 's YouTube Channel.&nbsp;I printed mine with 100% size (you see it on the pictures), but next time I would rather use 120% or more, because it makes threading the LEDs easier and bigger things fit into the shelves. What you need:<ul><li>LED-Strip (if you want different colors on each cell, use an RGBIC LED Stripe)</li><li>Printed Cells in a non-translucent Material</li><li>A translucent material for the windows</li><li>some clear material for the (Shelf-Lightcap's)</li></ul>Materials & Colors:<ul><li>Print the Panels, color and material doesn't matter</li><li>Print the Panel-windows in a translucent white, (or in your desired color when you are going to use a simple white Light strip)</li><li>Print the Shelf-lightcaps with a transparent or highly translucent Material</li></ul>Installation:<ol><li>If you use the reflectors, mount them first.</li><li>Arrange the cells like you want it on the wall</li><li>Fix them together with clip's and glue.</li><li>Make a simple drawing how to manage the LED Stripe.</li><li>Fit the LEDs inside (this can be a little annoying)</li><li>Add the Light caps on the Shelf.</li><li>You should fix at least the cable with some hotglue or somehow else</li><li>Put it on a wall</li><li>Fit the Windows and enjoy :)</li></ol>Optional parts:<ul><li>Holecap - to close the holes on the side.</li><li>Light cap - only needed for the shelf, looks like a integrated lightbulb (clear material).</li><li>Clip - use them to fix the panels together.</li><li>diffuser- print it with clear material</li><li>Reflector - if you print the cases in dark colors you should use the reflectors, you will have a much better looking light distribution.</li></ul>If you have trouble getting an even light, you can print the thicker (diffuser) windows or use the LED diffuser (clear petg/pla). If that doesn't help, fill the inside with clear/white silicone <a target="_blank" href="https://www.amazon.de/Silikon-Kautschuk-Lichtdurchl%C3%A4ssiger-Silikonform-Schmuckherstellung/dp/B08FYFP182?crid=3C6PCXNPIOANG&keywords=silikon+tr%C3%BCb&qid=1652212595&sprefix=silkon+tr%C3%BCb%2Caps%2C76&sr=8-13&linkCode=ll1&tag=tv-nothing-20&linkId=0133e6cd498b69d73037890e8d208c98&language=de_DE&ref_=as_li_ss_tl" rel="nofollow noopener">(like this)</a> or cotton wool.Here you can see how you can wire and control your LEDs, WLED Project:<a target="_blank" href="https://www.youtube.com/watch?v=GYxctjukehY" rel="nofollow noopener">https://www.youtube.com/watch?v=GYxctjukehY</a>&nbsp;More printing and assembly instructions will follow in the next few days.<img src="https://makerworld.bblmw.com/makerworld/user/2138172021/draft/2023-09-23_kf6ubzut5oxq.jpg" alt="image"><img src="https://makerworld.bblmw.com/makerworld/user/2138172021/draft/2023-09-23_whqgvrni9pp0.jpg" alt="image">Here i used some cleaning wool which improved the way it looks but at the end i used the LED-Stripe Diffusor and silicon :)

LED Hexagon Panels and Shelfs

furniture

Wing-Art

The picture depicts a cat with a knife in its mouth. The scene appears surreal and unusual, as cats don't typically carry knives. The cat looks curious and mysterious, while the knife adds an element of tension and danger to the scene. It could evoke various interpretations, ranging from humorous to ominous, depending on the viewer and the context of the image. Just take a look at my other Knife Cats here:<ul><li><a target="_blank" href="https://makerworld.com/en/models/234431#profileId-250975" rel="nofollow noopener">Paw Gift Box</a></li><li><a target="_blank" href="https://makerworld.com/en/models/211023#profileId-230853" rel="nofollow noopener">KITTEN LOVE</a></li><li><a target="_blank" href="https://makerworld.com/en/models/191314#profileId-211212" rel="nofollow noopener">CUP CUDDLER - Cat Coaster</a></li><li><a target="_blank" href="https://makerworld.com/en/models/100260#profileId-106926" rel="nofollow noopener">KNIFE CAT Napkin Holder</a></li><li><a target="_blank" href="https://makerworld.com/en/models/180745#profileId-198884" rel="nofollow noopener">KNIFE CAT Coaster</a></li><li><a target="_blank" href="https://makerworld.com/en/models/160631#profileId-176318" rel="nofollow noopener">KNIFE CAT Light Box</a></li><li><a target="_blank" href="https://makerworld.com/en/models/145924#profileId-158838" rel="nofollow noopener">MONITOR CAT</a></li></ul>

Knife Cat

cats

Gabb.99

This flexible PETG band is made of a standard PETG material,but it is printed with a unique texture that allows it to bend without breaking.&nbsp;&nbsp;<blockquote>If you like my work and you want to support me to do better, you can buy me a coffe at the following links <a target="_blank" href="https://buymeacoffee.com/GSprint" rel="nofollow noopener">https://buymeacoffee.com/GSprint</a> <figure class="image image_resized image-style-side" style="width:16.72%;"><a href="https://buymeacoffee.com/GSprint" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000060995/design/2024-05-03_858db37117022.png"></a></figure><a target="_blank" href="https://ko-fi.com/gsprint" rel="nofollow noopener">https://ko-fi.com/gsprint</a> </blockquote>

Flexy PETG band

test models

jdireen

Simple little Shelf for standard pegboards. I use mine to hold a speed square.

Pegboard Small Square Hanger

peg board accessories

Extrutim

Over 90 000 downloads and over 20 000 likes speaks for itself, a very popular filament clip now for you, here!&nbsp;A simple filament clip which prevents the filament from unwinding reliably! I&#39;ve tested many filament clips in the past, but couldn&#39;t find one that I was 100% satisfied with. Out of this need I have designed this small clip!&nbsp;This is the easiest way to attach the clip: Hold the end of the filament between your thumb and index finger, and press down on the previous winding with your middle finger. This way you can loosen the previous winding a bit to make it easier to get underneath with the clip to attach it. Do it a few times and it will be done in a few seconds.&nbsp;Important: Make sure your filament is not over extruded. This can cause the clip to not work as well as it could. I recommend regular PLA, Silky PLA has a poorer layer adhesion which can cause the clip to break.&nbsp;<blockquote>Tip:  2.85mm filament? Just scale the clip in your slicer to 160%.</blockquote>The most important features in short:<ul><li>Only requires about 1g of filament and prints in about 7min.</li><li>Does not attach to the spool. This makes it compatible with any filament spool and they can still be stacked easily.</li><li>Has a grip for easier handling.</li><li>A &#34;scoop&#34; to get under the previous winding better.</li><li>Bends the filament just slightly and therefore doesn&#39;t damage it.</li><li>A separate version with a hole in the grip to hang it up.</li></ul>The different clips explained separately:&nbsp;The classic: Unchanged because the vast majority are perfectly satisfied with this clip.The stronger clip: If you use Silky PLA or another filament with poorer layer adhesion, this scoop will be more sturdy.The clip for beasty filament: Filaments like PC are very slippery and stiff at the same time. The previous turn is clamped much stronger and prevents slipping.The closed clips: If the filament is fed into a Bowden tube these clips can stay on the filament. The hole is shaped so that the filament when it is straight simply slips through, if it is wound on the spool it holds the filament by its bending. There are these two versions, depending on which one you like better in handling.&nbsp;Remix? Please remember to select the same license as from this model when remixing.&nbsp;You can find <a target="_blank" href="https://www.printables.com/model/24371-grandmas-favorite-filament-clip" rel="nofollow noopener">the original upload here</a>, of course I would be very happy about a like and a follow there!<blockquote>Commercial use: Even if the license forbids this I agree if you show this model to your audience in a video etc. or use it if you run a business. Only selling the files or the physical model is prohibited. Please remember to name me as the author and link to this page.</blockquote>

Grandma's Favorite Filament Clip

Utility

MottN.

This is Amsy - he's friendly as long as you feed him lots of filament!&nbsp;Eyes are meant to be printed with supports as oriented in the profile to minimize color changes. The print profile has the teeth on the same plate as the eyes - move to their own plate if you want to save ~20 mins and a few extra filament changes. One of the eye ‘sockets’ need to be mirrored if you just use the raw model files to plate your own, they are meant to be left/right versions. &nbsp;Attach eyes and teeth to the AMS unit with some double stick tape. Teeth attach to gums with the same tape or superglue.

Amsy the filament eating monster

KymPrynts

Here's a simple sign to let the fairies know that they are welcome in your garden.